Hi
I just received my htc hero, and I really love it.
The only problem is, is that when i try to browse the web it doesnt load webpages. My WiFi is signal is good, i even removed the WEP key but still no succes, and on my old iPhone I can browse the web using the same WiFi connection
Does anyone know what the problem is?
Mike
Can you use the internet on your pc? Is your router setup properly?
yep everything is good..
does obtain an address ??
yes its 192.168.1.101
also if connected, select the menu key and hit advanced, make sure its not set to a fixed (static) address unless you need that.
I have mine set to 14 channels too... not that I probably need that...
i did that and it is not static also set it on 14 channels but no effect
well i had that issue when i just got my hero phone. everything was fine, signal was excellent, dhcp was ok , and it even got an ip but there was no data connection present. The only solution was to update the router's driver. In my case, it was a d link 524.try that too. ( just to precise that i had no problems with my previous phones with the router)
Another thing is to try setting the router to g mode only.
deeren said:
well i had that issue when i just got my hero phone. everything was fine, signal was excellent, dhcp was ok , and it even got an ip but there was no data connection present. The only solution was to update the router's driver. In my case, it was a d link 524.try that too. ( just to precise that i had no problems with my previous phones with the router)
Another thing is to try setting the router to g mode only.
Click to expand...
Click to collapse
yeah i already updated the router and i have set it into G mode..\
im getting crazy xD
Mikeytjee said:
yeah i already updated the router and i have set it into G mode..\
im getting crazy xD
Click to expand...
Click to collapse
what type of router do u have? u might want to search for a hacked driver for it. o know for a fact that u can find a lot for linksys.
try to connect to other AP's just to confirm that the problem is a compatibility issue bet ur phone and ur specific router and not the phone itself.
I got the same problem.
at home it works great with the router.
But at another router by my girl,
it connects to the router but the Internet doesn't work.
Sometimes it works for about 3 minutes.
I couldn't find the problem and her laptop works great
with that router.
The router is a Sitecom Wl-173.
Do you have the same router?
I am having a similar issue. It will work for a few minutes and then although the router signal says good I get no data coming through.
This is only a recent development though as I upgraded from a Linksys WRT54G router to a Linksys WRT160NL (which is Wirless-N), now I know that the Hero doesn't support N but the router is set to mixed mode as I have more G devices than N in my house so it should still work fine.
I will try tonight though swapping the router over to just work in G mode and see how I get on.
Its been suggested that the stock Linksys firmware on all models has issues with the Hero, which is why my old router was OK as it was running Tomato firmware instead of stock Linksys.
I guess I'll just have to wait until a 3rd party releases one for the WRT160NL
I had the same problem with my D-Link 524, i changed it to a netgear and internet has worked perfectly on my Hero since. It is a problem with the D-Link firmware and how it communicates with the Hero.
I had a similar problem with my router. What did it for me was to disable all security stuff (WEP / WPA) AND access control (i.e. define which devices may connect to your router). Then try to surf via hero. If surfing works, switch back on security stuff, surfing should still work. At least it did for me.
Svarto said:
I had the same problem with my D-Link 524, i changed it to a netgear and internet has worked perfectly on my Hero since. It is a problem with the D-Link firmware and how it communicates with the Hero.
Click to expand...
Click to collapse
I second this, however,if you still have the Di 524,you should know that an update is out and it fixes the connectivity problem.
Svarto said:
I had the same problem with my D-Link 524, i changed it to a netgear and internet has worked perfectly on my Hero since. It is a problem with the D-Link firmware and how it communicates with the Hero.
Click to expand...
Click to collapse
The wifi-stack in the kernel on the hero doesn't work well with many APs. With D-link I've found problems when the boxes run in 802.11n with b/g compatibility. The results are best with the AP locked at 802.11g.
deeren said:
I second this, however,if you still have the Di 524,you should know that an update is out and it fixes the connectivity problem.
Click to expand...
Click to collapse
I have that router and have the Wi-fi connectivity issue on my Hero. I've been looking around for updates for firmware/drivers but haven't been able to find anything.
Do you have a link to the update you used?
spiridk said:
I have that router and have the Wi-fi connectivity issue on my Hero. I've been looking around for updates for firmware/drivers but haven't been able to find anything.
Do you have a link to the update you used?
Click to expand...
Click to collapse
what is your version od the di524? is it the g2 version?
I think it is the G2 version, yes. It does say G2 on the label on the back of the router.
Related
Hi Friends,
Hope you could help. I have a X1 and I been trying to get it connected to my DIR-655 thru wifi with no avail. Surprisingly, I have 2 wifi network at home and it could get connected to the other one. I am sure it is not a router issue as my iPhone could connect to it using same login settings. Both my wifi routers are on WPA2. This is really puzzling me.
Cheers and thanks,
I have trouble with WPA2 security as well. WEP works just fine, though.
Sfkn2 said:
I have trouble with WPA2 security as well. WEP works just fine, though.
Click to expand...
Click to collapse
But the thing is it is working with WPA2 with my other router. Very strange.
I have the same issue. Can't connect to my wi-fi router at home, though have no trouble to access others. Or better to say I get connected, but internet is working either too slow and too short, or not working at all.
I did have this issue when I gott my X1,
after a few days I unplugged the router for 2 mins and plugged back in, then waited until it started up and tried to connnect and it worked.
dont know why it worked it just did so maybe it will help you?
Have you tried logging on to your router, and allowing your X1's IP address.
Thats what i had to do on my netgear.
well, I've even arranged a static ip for the mac-adress of my x1, enabled DMZ for that ip, but still doesn't help.
I've pulled the plug of the router out many times so far, doesn't seem to help.
routers are basically rather small computers
their firmware have bugs
which is why the manufactures
put out firmware updates to fix those
newer wifi devices like phone of often give issues
with older routers with older firmware
updating firmware is pretty easy and can be downloaded from the manufactures site
yesterday I tried again and I don't why, but it is working now still a bit slow and some programs don't connect (QIP, SPb Online tv etc), but at least browsing works.
p.s. forgot about router firmware, gonna try it tomorrow.
I have a ZyXEL P-2602HW-D1A Wireless router. I have tried all combinations of security, even NO SECURITY WHATSOEVER, and still the device won't transfer data.
Not working;
Firmware: 1.5, Build: CR817
Wifi Router: ZyXEL P-2602HW-D1A
Security: Tried All; WPA2, WPA, WEP & None.
Problem: Connect under all conditions but no data is sent
Please help.
Have you tried another WiFi access point to check the devices WiFi module actually functions?
No, I haven't tried that yet, but don't really see the point... I've connected effortlessly to the same WiFi network with my HTC Touch Diamond.
jbelman said:
Have you tried another WiFi access point to check the devices WiFi module actually functions?
Click to expand...
Click to collapse
For some reason my N800 wouldn't connect to MY ZyXEL P-2602HW-D1A unless I set the device (N800) to disable any kind of wifi powersaving features it had.
On another note, how did you get your hands on the device so early? I'm guessing you are using a Cybercity internet connection? (I'm in copenhagen myself)
edit: I actually came to that solution when i noticed I could connect to OTHER accespoints, but not the Zyxel ones.
Same problem here in France with a Freebox as router
I've noticed under the router's WLAN client list that the device does not have a "Host Name". Would that present a problem?
It is assigned an IP address by the router without any problems, though.
Also the device seems to lose connection and reconnect constantly (every 5-10 seconds).
I done some digging around in the router settings and found an "AnyIP" feature. Would that possibly help?
There are a number of issues floating around. Support for WPA2 seems iffy and some people can just change to WPA or WEP and all work fine.
There are however a number of people (such as me) who can get a connection perfectly, it shows connection OK, they get an IP from the DHCP server etc, they can even browse a page for a few seconds... but after that no data is sent and everything times out. This is happening on any security from none through to WPA2.
I have seen no solution to this anywhere and believe me I have looked. Some people have given up and got a new router, but this is not a solution.
Can someone confirm that this has been recognised as a fault with the magic and is being investigated, rather then assuming it's a user or router error. There are far too many instances of this across many brands of router for it not to be an issue with the HTC Magic.
zyborg said:
No, I haven't tried that yet, but don't really see the point... I've connected effortlessly to the same WiFi network with my HTC Touch Diamond.
Click to expand...
Click to collapse
What I mean is have you tested the device on ANY other AP except the ZyXEL?
No, but since I'm by far the only one having this issue (try searching the web; see my last post), I didn't feel it was necessary. Just want some input from xda-dev that might solve the problem, if any.
jbelman said:
What I mean is have you tested the device on ANY other AP except the ZyXEL?
Click to expand...
Click to collapse
I've had exactly the same problem earlier with the N800 on the zyxel. Exactly how you describe it.
Did you find out if you could turn off any powersaving features on the HTC?
same problem here
in france with a freebox
I don't exaclty know what router is in the box
but I have excalty the same
I set on never the wifi sleep(powersaving) mode.
i found it in setting wifi menu button then advanced and "never"
but the problem is still here
zyborg said:
There are however a number of people (such as me) who can get a connection perfectly, it shows connection OK, they get an IP from the DHCP server etc, they can even browse a page for a few seconds... but after that no data is sent and everything times out. This is happening on any security from none through to WPA2.
Click to expand...
Click to collapse
I have the exact same problem on mine. I just hope it is not a hardware issue...
Could be DHCP lease time problem. Did anyone of you tried to set up Magic with Static IP?
Yes, I tried that also - didn't help one bit.
TheRookie said:
Could be DHCP lease time problem. Did anyone of you tried to set up Magic with Static IP?
Click to expand...
Click to collapse
I also have this problem. Im in Denmark with a Zyxel P660HW-p1.
Another user of Cybercity in Denmark with the same problem.
ZyXEL P-660HW-D1
The android is the only device that doesn't work. I have tried with Iphone and laptops.
I've tried to change the settings on the router to no avail.
Enable 802.11g+ mode [on/off]
RTS/CTS Threshold [2432/4096]
RTS/CTS Threshold [2432/4096]
Max. Frame Burst [600/1800]
The device shows up in the device list with no hostname, the HTC Magic gets the right ip address (using the program WhatIsMyIp to view it)
I had the same problem before, when I set my TP-LINK draft N router with WEP security my HD can see it, connect to it (but speed was slow tho), and my HTC Magic just keep saying its not in range. However, when I set it to open security it works, so I recognise its probably the security setting... so I changed that to WPA2 and then it works.
In my case, I see different device have different tolerance to some settings (in my case, draft N + WEP is OK with laptop, HTC HD, but not Magic), so its still worthwhile to try a few different settings, and try a public wireless access point also to double confirm?
Power save?
I have Zyxel (P-2602R-D1A) router.
I had exactly the same problem with my HTC Vox (winmo)... but that was solved by boosting the WiFi in the phone.
WiFi -> Best performance
So Im guessing magic is in some WiFi "power save" mode...
I dont know how this works, but I thought maybe you could change some WiFi settings behind the hood - that is if the hardware is capable of it.
Zyxel (P-2602R-D1A) router
I am having the same issue with this router as the other posters. The phone connects perfectly and reports an excellent signal, but barely sends or receives any data. I have used a terminal emulator to ping the router and it reports an 82% packet loss. This must be a big problem for many Danish users as it is the standard wifi router provided by two of the major ISP's.
same issue here with my vodafone uk magic.
wifi connects and i can browse for a few seconds then get a connection error and can't browse until i re-start wifi on the magic...
i've actually given up using wifi at home now due to this.
router is a talktalk supplied Huawei Echolife HG520b using 128 bit WEP
i can connect fine via wifi at the office so i don't think it's an issue with the handset, just with certain routers or router configs...
this issue has been reported on the vodafone uk forums but as yet no solution.
http://forum.vodafone.co.uk/index.php?showtopic=31937
Ok, so I bought a new wireless router and my hero refuses to pick it up, Belkin N+. It saw my previous linksys wrt54g just fine. All of my computers and my iphone 3g see the new belkin fine also. I am running modaco 2.0, have tried all the other roms also with the same outcome. Anything I can do here? Return the router? smash my hero? jk
bmr34 said:
Ok, so I bought a new wireless router and my hero refuses to pick it up, Belkin N+. It saw my previous linksys wrt54g just fine. All of my computers and my iphone 3g see the new belkin fine also. I am running modaco 2.0, have tried all the other roms also with the same outcome. Anything I can do here? Return the router? smash my hero? jk
Click to expand...
Click to collapse
2 Things:
1. make sure you are broadcasting a B/G singal not just N.
2. Delete all of your existing "saved" wifi networks off the phone, anything you have previously connected to. then reboot. Seems like Redneck had an issue like this.
The router is set to allow b,g,n. I dont have any networks saved, I've flashed several different roms. As I said my iphone picks it up, so I'm gonna say it has to be a problem with the hero being the only thing in my house that won't see it.
Try changing the channel the router is broadcasting at. Maybe its too high for the Hero
channel 1, 20/40Mhz
well I switched the router to only broadcast in b/g and now the hero picks it up. The whole purpose for the new router was "n". so what gives? All my other "g" devices including computers and again my iphone work on "g" even when "n" is enabled. y not the hero?
I also haven't been able to get anything to install from the market since yesterday (the reason for trying to get on wifi anyway) Been flashing roms to try to get my standard apps to install and/or connect to wifi. Nothing. this thing is really asking for a flight into the woods.
Ok I gave up. turning off "n" on the belkin was the only thing that made the hero detect it. All other "g" devices work with "n" enabled. Ended up just setting up the old linksys as an access point for just the hero to use, what a waste.
do you have any N devices? if not then having it on won't help the speed of your network, only cause problems.
bmr34, i have the same router, and my hero doesnt see the wifi connection when the router is in B/G/N mode either. really irritating seeing as my notebook actually has N...
disabling N was the only solution for me, as i have no other router...
I know it's not much, but i have an airport express broadcasting BGN and my hero can see it..so maybe its your router?
What security protocol is being used on your router?
I have found that I cannot connect to a WPA-Personal and AES wifi. However, the newer WPA2 and AES is just fine. Also, TKIP works just fine.
i'm thinking that it might be the security settings, running mixed n,g mode fine here on belkin N+, ill check my settings and report back
Please do, as am having the same problem, Hero sees n+ in b+g mode only, not b+g+n.
doubljdog said:
i'm thinking that it might be the security settings, running mixed n,g mode fine here on belkin N+, ill check my settings and report back
Click to expand...
Click to collapse
Sorry to dig up an OLD thread, but just in case someone runs across this in a google search, as I did, then here's what you need to do:
Under wireless > security (in your belkin n+ setup page), set your authentication type to WPA2/PSK ONLY (not WPA/PSK + WPA2/PSK). For whatever reason, that's the issue that's freaking the Hero out.
If, for whatever reason, you still need to have the dual option for WPA/WPA2, I was going to use the guest access portion to dedicate to the Hero (as I really don't need to try to connect to the home network via mobile).
HI
last night i rooted my phone using the exploid x10 root apk, at first it worked fine and so i left is plugged in over night to transfer all my music onto my new sd card
but this morning it seems the wifi has broken
it connects to the network but will not send or receive data, so the browser says no connection, so does the market etc
i have reflashed its software 3 times even downgraded back to the R1, still no luck, its not even rooted and its broken
any1 had the same issue? i have searched the forum but the ppl with the sam issue have not been helped. please i dont want to spend $$ to get it fixed i have no job
Hi.
No problem with the wifi so far.This is strange.
Do you have warranty?
Sound stupid but did you try to reset your router?
If nothing is working you should go to the service.
yea i messed around with wifi router, nothing, i can browse the net on 3g wich is odd, but 3g is expensive so that cnt be the solution. bluetooth and 3g work obv but the wifi cannot connect itl connect to the wirelss just NO datac exchange?
There is someone with the same kind of problem but on an EVO 4g, but i really do not understand what they reply's mean. Maybe you do?
http://forum.xda-developers.com/showthread.php?t=800910
tried to search on google and came across a LOT of people having this same issue, on laptops, iphones, ipads, which lead to the conclusion that it may not be a wifi failure?
well it cant be a complete wifi failure kuz i used the dev menu and it says wlam enabled and scanning just no connection
thanks
berbecverde said:
There is someone with the same kind of problem but on an EVO 4g, but i really do not understand what they reply's mean. Maybe you do?
http://forum.xda-developers.com/showthread.php?t=800910
tried to search on google and came across a LOT of people having this same issue, on laptops, iphones, ipads, which lead to the conclusion that it may not be a wifi failure?
Click to expand...
Click to collapse
+1 and so much more for all your help man
i managed to fix it, it wasnt my device as such it was my router, too so i fiddled around with both mainly giving my x10 a static ip and bam it worked, cheers!!
I too have a wifi problem, but it is quiet a different one and i have no idea how to solve it.
when I connect to wifi at home my router reboots, but there is no such problem when i connect to my office.
I tried reseting the router at home and still no use, once it got connected and when i started a download from the market the router again rebooted.
How can i solve this????
xarchitect said:
I too have a wifi problem, but it is quiet a different one and i have no idea how to solve it.
when I connect to wifi at home my router reboots, but there is no such problem when i connect to my office.
I tried reseting the router at home and still no use, once it got connected and when i started a download from the market the router again rebooted.
How can i solve this????
Click to expand...
Click to collapse
Tried diffrent encryptions? like WPA2 or WEP?
Maybe switch from G to N standard (or vise versa, if availible?)
marice22 said:
Tried diffrent encryptions? like WPA2 or WEP?
Maybe switch from G to N standard (or vise versa, if availible?)
Click to expand...
Click to collapse
Sorry for my ignorance what is G to N standard ?
and i will try doing wep and wpa2 once i reach home !!
xarchitect said:
Sorry for my ignorance what is G to N standard ?
and i will try doing wep and wpa2 once i reach home !!
Click to expand...
Click to collapse
see: en.wikipedia.org/wiki/IEEE_802.11#802.11g
The X10 doesn't support 802.11n
no one said that it did..
My router uses N and i still connect fine
Seansmit17 said:
no one said that it did..
My router uses N and i still connect fine
Click to expand...
Click to collapse
Somebody told him to try to switch the router from b/g to n. That was the point of my post.
And your router obviously operates all 3 standards at once
Hi Folks,
I have been postponing this post but nothing ive seemed to do has worked. I THINK after i rooted my issues started. I am unable to browse the net or anything when connected to my wifi. I have reset the router, forgotten and rejoined the network with no avail. All my other devices do not have this issue. Im not really sure what else to say so maybe some of you gurus could pick my brain. Though this is a wifi only issue and on this network. When connected to other networks im fine. My setup is as follows. I have a hard line going from the router the ISP provided in the other end of the house to the router in my room. Like i said my phone is the only device that has issues on this network.
thanks in advance.
Dbrock1980 said:
Hi Folks,
I have been postponing this post but nothing ive seemed to do has worked. I THINK after i rooted my issues started. I am unable to browse the net or anything when connected to my wifi. I have reset the router, forgotten and rejoined the network with no avail. All my other devices do not have this issue. Im not really sure what else to say so maybe some of you gurus could pick my brain. Though this is a wifi only issue and on this network. When connected to other networks im fine. My setup is as follows. I have a hard line going from the router the ISP provided in the other end of the house to the router in my room. Like i said my phone is the only device that has issues on this network.
thanks in advance.
Click to expand...
Click to collapse
That's a pretty strange issue, not sure there is going to be much help... I've had some strange, random issues with my S5. I had issues with wireless, xposed and some other apps after rooting the first time. I got tired of it and used Odin to reflash the stock firmware, then performed a factory reset and rooted afterwords. I haven't had any problems at all after doing this... In all honesty, that's the route I would go if I were you. Sorry I couldn't be more helpful, hope you get sorted out
BadKarma81 said:
That's a pretty strange issue, not sure there is going to be much help... I've had some strange, random issues with my S5. I had issues with wireless, xposed and some other apps after rooting the first time. I got tired of it and used Odin to reflash the stock firmware, then performed a factory reset and rooted afterwords. I haven't had any problems at all after doing this... In all honesty, that's the route I would go if I were you. Sorry I couldn't be more helpful, hope you get sorted out
Click to expand...
Click to collapse
Just wanted to agree with BadKarma on this. I've not had your exact issue, but I have had some similar stuff after rooting originally. I used Odin to go back to stock and rooted again and have been no issues since. Hope it works out. . .
jpk17 said:
Just wanted to agree with BadKarma on this. I've not had your exact issue, but I have had some similar stuff after rooting originally. I used Odin to go back to stock and rooted again and have been no issues since. Hope it works out. . .
Click to expand...
Click to collapse
well i used odin and got back but it turns out it seems to be the router? im on stock with no root and still cant access the net or anything else when im connected to the router. any thoughts on this?
Can you reset the settings in the router via your pc?
Try connecting standing right next to the router. I had this issue with my Note 2 and it ended up being a physical issue with the wireless chip or antennas. It's actually the reason I'm not on a S5.
Not that u want to hear this, but I had to replace my router for the same reason. My router would only pick up certain devices, had to do with hardware and firewall security settings.
Sent from my SM-G900V using XDA Free mobile app
Ok so i changed to security in my router to aes and tkip and i was able to connect and browse the net and so forth. but i just got home and connected and wasnt able to get access to the net again. i tried forgetting network and re-entering it with no luck.
Dbrock1980 said:
Ok so i changed to security in my router to aes and tkip and i was able to connect and browse the net and so forth. but i just got home and connected and wasnt able to get access to the net again. i tried forgetting network and re-entering it with no luck.
Click to expand...
Click to collapse
First and foremost you have to isolate the issue to either ur phone or the router. In order to do that its very simple.... can you connect to wifi outside of your house like starbucks or friends wfii? If the answer is yes than the issue lies solely with your router. Let me know what you find out and I can help guide you <---- systems administrator Also please provide the make and model of your router as well as your modem and your ISP.
EDIT: I just read the line where you talk about having another router in your room. I can already tell you this is probably NOT an issue with your phone but rather your setup. The secondary router must be setup as a repeater or bridge OR on a different subnet. This gets very tricky for average home user and I do not recommend you tackle it on your own. Also your main router has to be able to play nice with the secondary and if it's one provided by your ISP it's probably a POS. Also your phone is probably not the only device having issues with this setup.... its the only one you are noticing having issues. Android OS is very sensitive to weird wifi setups and anything out of the norm will set it off. It's actually a great tool in diagnosing wifi issues.
armeN0317 said:
First and foremost you have to isolate the issue to either ur phone or the router. In order to do that its very simple.... can you connect to wifi outside of your house like starbucks or friends wfii? If the answer is yes than the issue lies solely with your router. Let me know what you find out and I can help guide you <---- systems administrator Also please provide the make and model of your router as well as your modem and your ISP.
EDIT: I just read the line where you talk about having another router in your room. I can already tell you this is probably NOT an issue with your phone but rather your setup. The secondary router must be setup as a repeater or bridge OR on a different subnet. This gets very tricky for average home user and I do not recommend you tackle it on your own. Also your main router has to be able to play nice with the secondary and if it's one provided by your ISP it's probably a POS. Also your phone is probably not the only device having issues with this setup.... its the only one you are noticing having issues. Android OS is very sensitive to weird wifi setups and anything out of the norm will set it off. It's actually a great tool in diagnosing wifi issues.
Click to expand...
Click to collapse
Hi there thanks for the reply. Yes i can connect to any other router without issue. The router is my Router Info:
Name N300 Wireless Router
Model F9K1002v5 (01B)
Firmware 5.00.15(Nov 1 2013)
Serial No. 12349GC2508237
Boot Loader 0.12
I use my tablet and other pcs within this wifi. It is under a different subnet as well. (i think so been a while since ive done any networking) The main router that comes in has the standard IP 192.168.1.1 and the IP for my router in my room (basically set up like this since my room is quite far and gets bad signal from the main router, Cable in -> Main Router -> Hardwire hooked into a port -> ethernet run to my room -> Connected to a port on the wireless router) 192.168.2.1. My ISP is Optimumn Online. My wifi was working fine until about 10 mins ago. seems to happen so often. I did change the security a while back to TKIP + AES on the router and made sure it was the same on the phone and it was working fine for days until like i said about 10 mins ago.
Broadley1 said:
Not that u want to hear this, but I had to replace my router for the same reason. My router would only pick up certain devices, had to do with hardware and firewall security settings.
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
This leads me to think that perhaps the router (however old or new) may have a setting, or an actual limit, on how many devices connect to it.
If not that, perhaps if you rooted, and tried removing bloat, you may have been a bit overzealous and removed something related to WiFi and are now having this issue as a result.
I have only removed the list of apps and bloat that have been posted on Ricks Rom HERE. The ONLY problem I have seen since removing this list, was that I can no longer access PhotoVault correctly. Gives me an error saying that it has no connection to the database, but my 4G is working fine at the time as I was downloading via steam and streaming a movie, and playing a PC game at the same time...
Dbrock1980 said:
Hi there thanks for the reply. Yes i can connect to any other router without issue. The router is my Router Info:
Name N300 Wireless Router
Model F9K1002v5 (01B)
Firmware 5.00.15(Nov 1 2013)
Serial No. 12349GC2508237
Boot Loader 0.12
I use my tablet and other pcs within this wifi. It is under a different subnet as well. (i think so been a while since ive done any networking) The main router that comes in has the standard IP 192.168.1.1 and the IP for my router in my room (basically set up like this since my room is quite far and gets bad signal from the main router, Cable in -> Main Router -> Hardwire hooked into a port -> ethernet run to my room -> Connected to a port on the wireless router) 192.168.2.1. My ISP is Optimumn Online. My wifi was working fine until about 10 mins ago. seems to happen so often. I did change the security a while back to TKIP + AES on the router and made sure it was the same on the phone and it was working fine for days until like i said about 10 mins ago.
Click to expand...
Click to collapse
You have the right setup with a different subnet. It's possible the main router is assigning the same IP address that your router has to another device. It would be best if you picked up another router that has repeater capabilities and set it up in repeater mode. Also reserve an IP address for your router from the main router to avoid IP conflicts.
Another possibility is simply the wifi on your router is deteriorating and it's time for a replacement. I recommend the Netgear Nighthawk R7000 if you don't mind spending the $$$. If your on a bit of a budget the Netgear N900 (WNDR4500v2) is the next best thing that supports repeater mode.
well its been still working intermediary. I have to unplug the router and plug it back in then i can browse the net on my phone. idk if id like to lay out that kind of money for a new router. there has to be something else thats causing it. i set the router to reboot everyday, also my phone. its odd though. sometimes it works sometimes it dosent.