Related
Hey all,
I am sorry posting the repeated question again, but this has a bit of a twist, and to this, i searched and didnt find any answer around.
My friends just bought a HTC P3300 from China. It came with a chinese DOPOD rom.
I had the original Shipped htc rom with me there so i upgraded my 1st friends mobile, with the shipped rom successfully, and then upgraded it to wm6 successfully.
now when i flashed my 2nd friend's device with the HTC Shipped rom, the upgrade process went to 3% and then the device just restarted and got stuck on the Initial dopod boot screen.
It is not moving from there.
So i downladed a couple of other roms, including the DOPOD ship rom,. but when i try to upgrade it, it says " ERROR:200, The Upgrade Software is outdated" kinda message!
now can someone please guide me how can i bring alive my friends rom, what is it i should do to successfully install some rom in it in English.
Please help!
thanks a lot!
Hi all,,
Please someone help me out with this problem...
Which rom should i try, or what is the problem with this?
Thanks a lot.
Did you cid unlock the hone either with USPL or IMEIcheck? If so, you should be able to load an OEM rom back on the phone. Try the HTC WWE WM5 rom or the German WM6...I dont see any reason why an unlocked phone wont accept at least one of those.
hi itschase...
No, i dont know if it was cid unlocked or not.
About USPL or IMEICHECK, nothign was done on it.
As i mentioned, one phone got flashed successfully, but the other failed!
I have tried the HTC WWE WM5 shipped rom, if thats what u are hinting to, but not the German WM6.
I have a crazy idea...
My phone is not bricked, but I was able to try running the USPL ROM Update utility on my phone from bootloader. I have zero idea if this would unbrick your phone, but its worth a shot - cant get much worse (or can it?). Download the USPL file, and run just the rom update utility with your phone in bootloader. After it resets your phone, put it back into bootloader and try reinstalling an OEM rom. I am probably wasting your time, but its worth a shot....
s
aaaaa
llllll
Insane Devil:
you need original rom for your device (with correct model id).
this should flash your device.
in the future, install uspl on your device before upgrading rom.
regards,
Factory Roms should be able to help u out in this...?
itschase said:
I have a crazy idea...
My phone is not bricked, but I was able to try running the USPL ROM Update utility on my phone from bootloader. I have zero idea if this would unbrick your phone, but its worth a shot - cant get much worse (or can it?). Download the USPL file, and run just the rom update utility with your phone in bootloader. After it resets your phone, put it back into bootloader and try reinstalling an OEM rom. I am probably wasting your time, but its worth a shot....
Click to expand...
Click to collapse
Good Idea but ... not correct!
Your device might be CID locked and you were able to run USPL from bootloader, because ... you already have had USPL. Am I right?
Hi guys,
at first i want to thank you for any solution or info you provide in this forum, it helped me in a lot of cases.
I'm looking for a solution for a problem i'm facing, I have two P4350 which the second is from a friend of mine.
This P4350(HERA100 IPL/SPL 4.x the second device) was bought through ebay and had the german windows mobile 6.0 on it. I couldnt flash the WWE edition of windows mobile 6 because of an error saying "Invalid Vendor ID" so i assume it was a CID Locked.
So I did the first thing i found on this forum and after a lot of reading on how to do it, i installed the Hard SPL from Aserg. The problem is when I try to install the extended rom which comes from the distributor here in Greece of HTC Phones.
Apparently they have done something and somehow it recognizes that i have installed wrong SPL and always reboots(it displays an error msg inside the OS enviroment and after 5 sec it reboots) when the WWE OS start after the installation of the programs inside off Extended ROM.
So after some more reading i found that i could have used the USPL method for bypassing the CID Lock. Correct?
Now my problem is that I want to remove the Hard SPL to install the officially shipped edition of SPL + WWE ROM using USPL.
Whichever solution I use to remove the Hard SPL it just wont go away!
I even installed the German edition again with the hope that it will install the stock SPL again. It says that is being flashed but the SPL doesnt even change! While the ROM is being flashed correctly and windows boot without any problem
I have tried Flash Center, Stock Rom(German & WWE) and lots of different removals for Hard SPL but nothing worked!
Is there any workaround/solution for this problem? I have no problem to use any tools or console based ones but I need some information or a tutorial so as to not brick the device.
Thanx in regard for any help and sorry for the long post but I wanted to describe all the steps that I followed to get here.
P.S. If this post is in the wrong thread please tell me so.
hey guys.. i need some help
i installed an app an asked me to restart the device.. i did
and now it's stuck on the splash screen
IPL 2.27
SPL 2.27
GSM 02.44.11
OS 2.27.1.1
and the orange brand wallpaper
what can i do? i tried to reset it and format it
but an error shows up
"Press Send to restore factory default,
Other keys to quit"
ok.. send it is
"Format FAT Partition
Format failed"
i can enter RGB bootloader (cam button+power), but i don't know what i can do??
ps: i just got it from a friend, i don't think my phone is cid-unlocked..
and i'm stuck at the splash screen and nothing to do
please help me.. tell me what can i do
Ouch.
Sounds like the built-in flash memory is bad. I'm not sure what you can do about that, short of replacing it.
No offense Reverend, but where did you hear that? Its just bad flash man! Simply enter the bootloader mode, and re-flash a new rom to your device. What program where you trying to install?
ashasaur said:
Its just bad flash man! Simply enter the bootloader mode, and re-flash a new rom to your device. What program where you trying to install?
Click to expand...
Click to collapse
something from a pocket freeware site.. "XDA-Team_Manilla2D.CAB"
it's a touchflo 2d app for today screen.. after installing it, the sistem wouldn't boot up anymore. so i tried to format, soft reset, to restore the system..
the formatting started and then gave an error and shut down immediately. i didn't even catch a glimps of that error 'cause it restarted.. and then the problem. it won't go past the operator splash screen
tried to reformat.. would't start.. format failure
..simply wow.. don't get me wrong , but i didn't knew there was a bootloader screen until this happened.. i dug up about this problem on the forum, but i can't solve it.. i don't know that much about flashing.. isn't the wizard supposed to be cid-unlocked to be able to flash it with a new rom?
or there's a rom that doesn't require the pda to be unlocked?.. cause' i think mine isn't. and, since i can't get it to boot up the os, i can't cid-unlock it after the tutorials i've found here..
and i don't want to bury it, yet
Oh you poor sole...that program that you tried to flash is notorious...I did the very same thing to mine just the other day. It doesnt work with the Wizard yet for some reason.
Now, onto your problem, yes-I think that your Wizard IS INDEED CID locked, and if that is the case, search for the Wizard LOVE ROM and flash it. It can be flashed with a CID unlocked device. Head into your bootloader mode, then start up the RUU flashing program on your PC that is included with the ROM. After it flashes, you can use the Wizard Service Tool, which is also availible via searching to CID and SIM unlock your device, and then you can put any ROM that you like onto it. I hope that helps somewhat!
If you can get it into bootloader mode, you can recover. If the phone is not unlocked, you will have to load the original service ROM for that phone.
You MIGHT get lucky by just flashing the IPL/SPL back though, now that I think about it...look at the "How to Remove HardSPL" thread for the most popular IPL/SPL sets. If this works, you won't have to put all of your custom settings and programs back on.
Myrddin Wyllt
Plz note all the IP/SPL posted in the thread 'How To Remove HardSPL' are for G4 devices and they are not meant to be flashed to a G3 device,if flashed will certainly 'Brick' the G3 device.
Whereas,here ,he has a G3 device with IPL/SPL 2.27,flashing those IPL/SPL (Bootloaders) means instant death of the phone.
koolariz
Simply,download the official stock rom of the carrier and flash it in Bootloader mode to recover back to its default status,than downgrade to IPL/SPL 1.xx to CID unlock the phone,how to CID unlock the phone, read and follow this guide carefully :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
zabardast_1 said:
koolariz
Simply,download the official stock rom of the carrier and flash it in Bootloader mode to recover back to its default status
Click to expand...
Click to collapse
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/
If it is truth....
koolariz said:
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/
Click to expand...
Click to collapse
If you have said the truth... you've got a G3 device cause your ipl spl are 2.27.
So try to install this original ROM... is for Tmobile WWE so try it.... http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html
Or search on tutorials tu unlock and upgrade the wizard Love ok?
Good luck men...
And please please please read and ask before do anything, BTW now the only you can do is to runn this ROMs cause you cant get your original carriers ROM.
If this dont works... please read the thread from upgrading forum in this wizard subforum that said something like Stuck on splash screen solution DYI or something the tuttorial DEV is called Drug_store.
zabardast_1 said:
Myrddin Wyllt
Plz note all the IP/SPL posted in the thread 'How To Remove HardSPL' are for G4 devices and they are not meant to be flashed to a G3 device,if flashed will certainly 'Brick' the G3 device.
Whereas,here ,he has a G3 device with IPL/SPL 2.27,flashing those IPL/SPL (Bootloaders) means instant death of the phone.
Click to expand...
Click to collapse
Good catch. Sorry about that!
Myrddin Wyllt said:
Good catch. Sorry about that!
Click to expand...
Click to collapse
Nah! buddy,you are doing fine,its just we sometime overlook the post,it happens to all of us,so no harm done !
koolariz said:
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/
Click to expand...
Click to collapse
YES ! you can try this rom or download the WWE (English) version of Orange SPV M3000 Official WM5 Rom from here :
http://www.megaupload.com/?d=5OZEILXK
zabardast_1 said:
YES ! you can try this rom or download the WWE (English) version of Orange SPV M3000 Official WM5 Rom from here :
http://www.megaupload.com/?d=5OZEILXK
Click to expand...
Click to collapse
10x a lot.. i hope it won't die on me..
LE:
i tried the O2 rom [12.18.3.103] u gave me. it doesn't start flashing.. 0% and then
quoting:ERROR "This NBF file cannot be used for your PDA phone. Please get newer NBF file."
ps: The orange one on the xda ftp server doesn't work .. it's archived and parts are missing..
Hmmm,ok,lets try this out,download 'Button's Rom 1.05' from the link posted below and check if this works out.
Otherwise,you'll have to look for official Stock Rom (Romanian),which was running on the phone before.
http://wiki.xda-developers.com/index...0for newbies
i'll try this one.. for now.. ps:your link is broken?
i just have another question.. i have a friend with the same wizard as mine, i mean in the same carrier.. is it possible cu get his rom? to dump it on SD card.. or something?
so that i may flash that rom?
LE:
i found another thing on a DIY
If you got IPL/SPL 1.xx go to G3.3. If you got 2.xx go to G3.4
G3.3 Download button rom and flash it to your device. Your device should startup again after doing this. Go to G3.5.
G3.4 Download wizard_love rom and flash it to your device. Your device should startup again after doing this. Go to G3.5.
Click to expand...
Click to collapse
should i try the wizard_love rom?
ok,download Button's Rom 1.05 from here:-
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
also try this one :-
xda_miniS_LaunchRom
http://rapidshare.com/files/43423464/Xda_MiniS_LaunchROM_v154102.exe
and yes! you can also try Wizard_Love _Rom.
Now,its possible to back up the rom from your friend's phone,but it also have to be CID unlocked first and your device shud also be CID unlocked to flash it from the sdcard (MTTY) method.
pfff (
i've updated the rom with the Wizard_Love_2.26.10.2_WWE_Novii_CF2 and now i have a blue sci-fi splash screen with "AKU 2.3" in the top-right corner..
IPL 2.27
SPL 2.27
GSM 02.25.11
OS 2.26.10.2
same ****
won't boot up
and if i try to format, same error.. Format Failed.. so here i am again
hmmmm,try a Hard Reset,hope it works or try other roms I have posted above.
Do you have any sdcard inserted in the phone right now,take it out before flashing any rom.
koolariz said:
won't boot up
and if i try to format, same error.. Format Failed.. so here i am again
Click to expand...
Click to collapse
dude.. that's what i've been trying hard reseting it.. and i get the same error each time i try it "Format Failed"
no sd inserted.. i took it out a while ago.. cause i read on the forum to flash without it.
i begining to get desperate over here
i'll try other roms..
what else can i do than hope this works
Also take out if any sdcard or mini sd is inserted in the phone before flashing,it also causes this Format Failed problem.
Hi,
Artemis (not branded, CID locked), boots only to BootLoader.
Flashing official ROMs (either old or new one) from BL ends at 3% with errors #270 or #244.
Tried flashing _official_ ROMs from mSD card (2GB Sandisk, FAT32 formatted, ARTEIMG.nbh renamed, in root of the card) - "Checking SD contents" and straight to tri-color BL screen.
BL screen shows :
IPL 1.12.0001
SPL1.12.0000
Can connect with mtty, but I don't know what to do with it
Any help/ideas much appreciated, thanks.
t.
hey
maybe the rom you are trying to is not the one for it
try to get one from the the htc site it self
cuz you need to flash the rom with the original carrier and language as i think
and since you can inter to the boot loader maybe you can run the USPL
just an idea
trudny said:
Hi,
Artemis (not branded, CID locked), boots only to BootLoader.
Flashing official ROMs (either old or new one) from BL ends at 3% with errors #270 or #244.
Tried flashing _official_ ROMs from mSD card (2GB Sandisk, FAT32 formatted, ARTEIMG.nbh renamed, in root of the card) - "Checking SD contents" and straight to tri-color BL screen.
BL screen shows :
IPL 1.12.0001
SPL1.12.0000
Can connect with mtty, but I don't know what to do with it
Any help/ideas much appreciated, thanks.
t.
Click to expand...
Click to collapse
CID unlock first...
Your SPL must be 1.11.0000 for you to flash any ROM you like.
See here: http://forum.xda-developers.com/showthread.php?t=311403
Cheers
CID unlock first...
Click to expand...
Click to collapse
It boots ONLY to BL, doesn't start normally, so I can't USPL/CID unlock it (would need ActiveSync connection for this, unless there's some other method).
That's why I try to load an official, signed rom (from HTC site) - but for some reason Artemis does not like it, neither from card, neither from BL, even though it is the official "unlocked" ROM.
t.
But you said that your Artemis is not official, so that's a problem.
Being a official ROM doesn't mean that you can flash it in all Artemis.
For example, if the language is different, then it can't be flashed either.
By "not branded" I meant it's plain HTC, not Orange, O2 or other operator.
That's the problem - a HTC unit does not accept HTC ROM (but used to, without problems).
t.
Did u find a solution to this? i have the same isue
>Did u find a solution to this? i have the same isue
Nope. Spent several evenings searching for a hint, found nothing.
I hope somebody will find and share a way to unbrick it, but since Artemis is quite an old piece, and the gurus are busy with newer toys, I guess we need plenty of luck
imei-check.co.uk was mentioned few times, that they can provide rebuilt boot-data (?) to be flashed but there're no info about it on their www.
It seems that software version information is broken/lost in the device, so ANY attempt to flash ANY software into it will result in some kind of "wrong version" error.
br
I dropped the ROM on SD
Try that..and be patient..you should see upload status that way. I waited 30 minutes at the RGB Screen before rebooting. Also..make sure you unlock your phone 1st.
there is hundereds of %2 %3 cut off flashing artemis on earth. No solution even mtty and goldcard.
Worked???
Did it worked anyway? I have same issue..So Im just wondering if I have brick or I have to triyed to fix it
just flash it
i think u just flash it with the original rom.
this for dopod M700 official rom.
http://www.4shared.com/file/1337563...Ngsm411330_026990_Cmp_Ship_R.html?err=no-sess
what type of artemis do u have?
just go to the official web.
www.htc.com
but u need to insert SN number to download it.
just run the exe file to upgrade.
Hi, guys.
I have real problems with my Trophy. My English is not so good, but i try to explain my problem:
1. I had HTC_Trophy with Spanish vodaphone(vodaphone logo when system starting), but it seems unlocked, because i can use it in Uzbekistan.
2. Bootloader version was 5.12.xx, and i wanted to downgrade it. I wanted to install on my phone DFT v4.
3. I done it by GoldCARD, and i got message radio update failed , update failed (in red).
After this problem i can't install any ROM's, even original SPAIN. It give me error 226: Flash Write Error on 10%. Only DFT Roms installing fully, but after rebooting device i get 7 vibro signals(anybody know what means this error 226, and 7 vibro signals).
Than my friend installed in my device Full Flash (Model ID: SPAR1000, i have Model IDC401000) by Riff Box J-tag. And my device turned ON. But camera still not working, i think that it cause wrong Model id.
And one thing else, when i wanted to install Radio separately by RUU, i've got the same Error: 226 on 98%. Well i think that something wrong with my Radio module.
Any IDEAS???
P.S. Anybody, please give me FULL FLASH for my trophy, with Model IDC401000, for Riff Box J-Tag. I really need it.
P.S.S. Languages I understand: Русский, English, Türkçe, Uzbekcha.
Thx!!!
HTC_Trophy said:
Hi, guys.
I have real problems with my Trophy. My English is not so good, but i try to explain my problem:
...........................................
Any IDEAS???
P.S. Anybody, please give me FULL FLASH for my trophy, with Model IDC401000, for Riff Box J-Tag. I really need it.
P.S.S. Languages I understand: Русский, English, Türkçe, Uzbekcha.
Thx!!!
Click to expand...
Click to collapse
Probably you have the wrong rom ....
See here how to find the rom for your trophy
http://forum.xda-developers.com/showthread.php?t=924333
What i had:
Firmware revision number: 2250.21.51201.164
Bootloader version: 5.12.2250.1
164 - Vodafone_SPA operator, with CID VODAP304
I've tried to install this version, but it failed: ERROR 226: Flash Write Error.
Try building a GoldCard, and then install the Euro Spark rom into your phone using GoldCard method. This will also change its CID at the same time, and make it possible to downgrade SPL and install HSPL (custom roms).
Dear TheXev, thx for answer!!! Could you post the link for Euro Spar rom that i have to install in my device. P.S. THX!!!
HTC_Trophy said:
Dear TheXev, thx for answer!!! Could you post the link for Euro Spar rom that i have to install in my device. P.S. THX!!!
Click to expand...
Click to collapse
RUU_Spark_HTC_Europe_1.10.401.04_Spark_5.52.09_RELEASE.exe is the name of the rom, it can be found in football's Spark/SparkW rom thread. Remember, this rom might not have the launage pack you want, but you can use it as a path to installing HSPL, and then a custom rom with the language you want!
Dear TheXev, after pluging in the gold card, my device have freezed on Checking mode after Loading.??? And any ROMs - result the same.??? THX.
HTC_Trophy said:
Dear TheXev, after pluging in the gold card, my device have freezed on Checking mode after Loading.??? And any ROMs - result the same.??? THX.
Click to expand...
Click to collapse
First rename rom on sdcard, THEN install goldcard bootloader. It seems that if you don't have the file name ready before installing the bootloader, it doesn't work right. I never had this issue, but I'm also sure I put the image on before I installed the goldcard bootloader to the SD card.
Remember, this image may not have your language pack, but you can install a custom rom after doing this.
So long as the GoldCard screen tells you it is checking the image, it should be okay. Flashing with GoldCard can take 20mins to a half-hour.
Even though I have done GoldCard on SparkW (not Spark like you), i named my image with all capital letters. SPARIMG.NBH is what I would try.
Also, maybe RUU_Spark_Vodafone_SPA_1.10.164.01_Radio_5.51.09.2 9_22.32.50.10U_by_ansar (from that ansar thread someone linked you too earlier) would be a better image to try for the downgrade.