Related
Hello to all of you,
I checked the thread and I did not find anybody with this kind of problem.
Until yesterday camera was working perfectly, then yesterday I tried to take a photo and all I could see in the screen were green, yellow, pink, etc. lines flickering. I dont know, is this a software or a hardware problem. I got my device two weeks ago so warranty should apply, but I hate to lose two week at least in repair.
I've tried soft reset and hard reset non of them works.
cheers
As you have hard reset, I'd say it's a hardware problem.
Mike
It is strange, because when I get my hand or anything near the lens (I mean very near) the screen is ok, but the moment I move my hand from the lens it starts again.
Makes me wonder if the auto light level adjustment is faulty. i.e. with something very close to the lens the light level will be very low. But regardless it still seems like a hardware issue.
Mike
Thanks for your help Mike. It looks I'll have to send it for repair.
Cheers
i had the same problem with my 8525 so i got it replaced and seem to have the same problem again. Seems when there is good lighting there is no problem once its kinda dark all the colors come back. Also mines fine untill i try to chnage from auto light to like indoor lighting.
Can anyone shed any light on why my buttons, just the ones on the unit itself, aren't producing their lovely orange glow anymore? The d-pad light still works, but the OK, Win & browser buttons are dark.
The only thing I could think of was that I installed SBSH, like everything because I'm fed up with Spb, so I uninstalled w/ several reboots. Still no go.
Maybe it's better that way. Less battery drain. It's not like I can't find them, but they were cute. My 3-year-old daughter loves the orange.
UPDATE:
I never did figure out what it was. Between booting up with PhoneAlarm, UltimateLaunch, MccMoblieFinder, LivePVR (which I'm not sure works) something crashed, so I hard reset.
I did figure out after my reset that the backlight doesn't actually go all the way off; when the buttons are off the screen is as dim as it's going to get (and now with rk-backlight, I am finally free of SPB - they lost thier robustitude with newer OSs and everyone else seems to have caught up with thier graphics, but with a smaller footprint.)
Does your backlight work? i always thought it was just the backlight shining through the buttons.
Well, no, actually I've never really thought about it.
Mine are off until the backlight comes on then they are on.
I noticed the other day that mine had gone off too, but a soft reset sorted it.
keyboard backlights!!!
Janis said:
Can anyone shed any light on why my buttons, just the ones on the unit itself, aren't producing their lovely orange glow anymore? The d-pad light still works, but the OK, Win & browser buttons are dark.
The only thing I could think of was that I installed SBSH, like everything because I'm fed up with Spb, so I uninstalled w/ several reboots. Still no go.
Maybe it's better that way. Less battery drain. It's not like I can't find them, but they were cute. My 3-year-old daughter loves the orange.
UPDATE:
I never did figure out what it was. Between booting up with PhoneAlarm, UltimateLaunch, MccMoblieFinder, LivePVR (which I'm not sure works) something crashed, so I hard reset.
I did figure out after my reset that the backlight doesn't actually go all the way off; when the buttons are off the screen is as dim as it's going to get (and now with rk-backlight, I am finally free of SPB - they lost thier robustitude with newer OSs and everyone else seems to have caught up with thier graphics, but with a smaller footprint.)
Click to expand...
Click to collapse
HI GUYS,
A late entry but tot u guys might b able to help a brother in need, my Ameo's keyboard back light never seems to come on EVER, & have check for setting or cab files but all to no success, can any1 help PLEASE either by just replying on here or PM me please :-(.
Umm, the ameo keyboard doesn't have a backlight???
Backlight off
there's rk-backlight.exe
http://forum.xda-developers.com/showthread.php?t=328114&highlight=backlight
check the Settings/system/backlight
The backlight on a working x7500/1 doesn't actually go all the way off, the screen does (standby), and the buttons do when it's in it's more-or-less "off" state (the buttons are off, and the system calls the state "off" but it's just really low.)
If you can see the screen, but there really is NO backlight, my suggestions in this order:
a soft reset
install a backlight contolling software like rk-backlight & set it
a hard reset
a flash of a new rom
send it in to ppctechs.com for repair
hi all,
i have Some problem with the proximity sensor.
when i lanch a call, first i put the phone near My head, the phone goes black,
but 2 seconds after, when It start tonning (ringing in the speaker) the phone wake up.
if i put It off and back It goes off.
but when the person answer, It's the same thing, the phone wake up. and i must put It off the head and back.
if i dont do this i cut All people 3 or 4 times.
if i receive a call, no problem.
i know some people have already post same problem with proximity sensor, but nobody explain it.
if someone can help me to fix it.
(sorry for my English )
im sorry but I really need help
Hi ! I`m so sorry but I cant help you. The proximity sensor did act strange on me with no obvious reason and I was forced to hard reset ...
Cordialement ,
Sergiu
Even if i hard reset, there is no change.
If i call someone, on each step the phone switch on :
when start ringing ... and after when the person answer ...
is there a registry to edit, or maybe a ROM update ?? im in 1.43
But if i update the ROM i'll loose my orange tv player app
You may try to flash another ROM at your choice ...
I know this might sound a strange question, but do you have long hair?
I only ask as this issue has been raised by a few other people, and most of them have said it either happens with their girlfriends (who have long hair), or that they have long hair.
I have short hair and I literally couldn't be more impressed with the proximity sensor.
lol, no ...
i' ve short hair.
i tried with the finger hidding the proximity sensor, and i can see when the phone start ringing it wake up, and the same thing when the person answer, or answering machin.
so it's a software problem.
i tried to update the ROM, and it says it can't update
maybe because i'm on French Orange ROM .
i'm sure if i can update with RUU rom, it will work fine after
I have this problem occasionally. It seems the proximity sensor somehow cooperates with G-sensor, because last time I had this problem I was lying in bed while calling, and screen simply did not turn of. But when I turned the phone vertically, and back, it started to work. Very strange.
so i upload the ROM to an officialy 1.48 (i have no orange rom and app now)
but still the same problem.
the phone goes black, but wake up when start ringing, and same when the person answer the call
i need help, because each time i cut always the call if my hear touch "end call".
now to keep the call i put it back from my head and back to when start ringing, and i do the same 5 seconds later when the person answer.
and after its ok, the phone stay off
i love this phone, but i'm sad
I guess it's a bug HTC will have to fix at some time. I've read it can happen to all ROMs.
But for the meantime, there's a workaround. You can install S2U2, it's a nice program. and one of its features allows you to choose "blank screen on talk". Never fails. Try it. No more accidental button clicks.
Thx a lot i'll try it (try to find it before )
maybe someone can make a soft to have a slide to unlock while calling ??!!
but i'll try your soft and tell you
same problem with my hd2....despite I tryied several rom on several build.
just a hint: don't activate "sms wakeup" (BSB allows that), because if u receive a message during a call, display will activate again!
It's a big issue, coz I cut many calls or I push buttons during a call...
I need a cab to lock the screen during a call!
ok i try S2U2, but difficult to configure...
always the same thing.
i found that not all numbers bug !!
i try a friends and all is ok, but my wife or my mother or others it bug
i dont know why some work and other not
i some one can help me trying configure S2U2 ???
or a cab just maybe to slide unlock while calling, something like that.
are we only 2 with that bug ????
it's not about the number u call, it's about simple casistic! try to recall the same number once the black screen doesn't work...try and it's gonna work! it's how sensor application works....just when it wants!
everythin was right with the resistive screen, but the capacitive one needs to a different lock.
i test sevral times on the sames numbers.
always my friend number 1 work nice, and all others not
it's very strange !
after call, press windows key and then lock pad.... I am doing this now cause of occasional problems....
yep, its a way...
but it's so strange.
i see when i try to call a home phone all is ok.
and some operators just bug the proximity sensor !!??!!??
So strange.
i just try another rom (an english one) but the same thing
and i have some trouble to make a god configuration for S2U2
so still no solutions... thats too bad
Hi all,
I come back to you to explain the situation now.
I call the orange center for smartphone, and i explain my troubles, it was last thursday.
So they change my phone last friday.
I tried directly, and exactly the same problem.
i called them again, and explain again, then they change it an other time.
This morning they come change it for the 2nd time, i try directly again,
then the same thing. alwayes the same problem.
so i call them again, and they say someone call me in this week to talk about the trouble.
i try other orange sim card, and same problem.
so in all my contact list, i've only 2 numbers which there is no trouble.
For all others numbers, the phone wake up each time.
PS : the orange service has nobody instead of me who have this trouble
anyone have a solution ????
proximity problems
Hi,
i also have the proximity sensor problem (or rather wife has)
HTC HD2 on UK o2 operator ROM
as i said, wife has a problem of screen activating during calls, it has not happened to me yet ?
noticed she always holds the phone to her left ear (wont change sides she says), i hold it to the right ear !
really need a fix for this as she threw it at me tonight as she cut off a really important call ! !
After two weeks testing I found out that the original screen protector with the two holes for the sensor makes the problems!!!
thake the screen protector out or cut it and the proximity sensor will work perfect.
Kochavy
I have a problem with my Xperia X1i. With the latest ROMs i have build (23549 and 23559) after some time during the day it stops displaying a message that someone is calling me. When someone calls the screen lights, the LEDs blink but there is no sound and no message on screen. After soft reset everything works OK for sometime and the same happens again later. Has anyone experienced a similar problem? Could it be related to ThrottleLauncher that i use for Today Screen an not Windows?
mmm i never use throttle launcher but it could be.... why you dont try to build another rom without throttle just chome... then use it for a while and check if it makes you the same issue...
I keep having this problem with almost every build I try in my TMO HD2. When holding the phone, as soon as I make a call, the screen goes black. When I end the call using the hardware button, the keypad lights come on and the screen is non responsive until I plug in the charger. Solution?
I too have this problem but not that bad.After ending the call the screen stays black for 3-4 seconds, but it is still irritating.
Well mine stays black until I insert the charger which renders any of the builds with the issue completley unusable.
this is already known problem, especialy with DesireHD build it gets worst. there is no solution yet, as I understood, but several workarounds, for example discussed in this thread
http://forum.xda-developers.com/showthread.php?t=835127
I always say it but maybe trying a different build would work?
brinks said:
Well mine stays black until I insert the charger which renders any of the builds with the issue completley unusable.
Click to expand...
Click to collapse
Do you have BsB Tweaks installed? If so, this problem is caused by having the "Tap Time" tweak set to "on". I was having this issue and read about the fix somewhere (might have been here). I set "Tap Time" to "off" and.... immediate and permanent (so far, about a week) fix.
regards
noshad
brinks said:
I keep having this problem with almost every build I try in my TMO HD2. When holding the phone, as soon as I make a call, the screen goes black. When I end the call using the hardware button, the keypad lights come on and the screen is non responsive until I plug in the charger. Solution?
Click to expand...
Click to collapse
Do you have BsB Tweaks installed? If so, this problem is caused by having the "Tap Time" tweak set to "on". I was having this issue and read about the fix somewhere (might have been here). I set "Tap Time" to "off" and.... immediate and permanent (so far, about a week) fix.
regards
noshad
EndCall - black screen freez
same problem here... please help me !
i had installed on my hd2 DL.Desire.v4.31.44.12 and it's worked fine for a wile but now i tryed the last version of dl desire and a gingerbread build but the problem didn't disapear. I reinstalled radio that is version 2.15.50.14 but .. nothing seams to work
I need your help guys !
Sorry for my bad english.
I was curious to see if in wmo it is the same problem, but no... in wmo works fine.
it's strange that at first fresh install of dl.desire everything was ok, but now it isn't. I've reinstalled magldr but with the same results.
It doesen't work.
I think it is something with the proximity sensor, because when i turn on the speaker and the screen is on i can end the call with no problem and no freeze.
the only solution i have for now to unfreeze the screen is to plug in the charger cable in the device.
Problem Solved
I just cleaned the proximity sensor and it's working great. No freeze no black screen.
I have the same problem.
http://forum.xda-developers.com/showthread.php?t=1012396
If you have the original screen protector with the 2 holes from htc, try to clean the sensors with a soft microfiber.
I didn't had this problem untill i replaced my screen protector with the htc screen protector. (the 2 little holes are exposed to dust and dirt, and when you remove the phone from your ear the sensor doesn't respond because of dirt. I think in android the voltage for sensors is a little bit lower than wmo, and that makes the sensor less responsive)
Sorry for my english.
install from android market ADW launcher....make it default home screen...try this one too..
Solution
Everything difficult-is easier)
Just clean dust on the sreen,where sensor is situated.