I'm going camping this coming weekend to a place in the mountains that tmobile has very poor coverage in. I was there last month and discovered my friends at&t phone had full service while my g1 showed service, just didn't show any bars and other times only showed one bar. Calls with my phone were flacky and dropped out, his worked perfectly. Is there a way to make my phone switch to roaming on at&t?
I have a national plan on T-Mobile.
I'm running Cyanogen 3.9.5
Thanks!
nickwinn said:
I'm going camping this coming weekend to a place in the mountains that tmobile has very poor coverage in. I was there last month and discovered my friends at&t phone had full service while my g1 showed service, just didn't show any bars and other times only showed one bar. Calls with my phone were flacky and dropped out, his worked perfectly. Is there a way to make my phone switch to roaming on at&t?
I have a national plan on T-Mobile.
I'm running Cyanogen 3.9.5
Thanks!
Click to expand...
Click to collapse
Should do it automatically. I saw my phone do this the other weekend when I was travelin. My phone showed ATT, Corr Wireless, and some other service and certain points.
The tmobile signal is just strong enough to keep it from roaming there. I was hoping it would switch automatically but it never did. I know the phone does have roaming ability, i've seen it switch to roam and work fine.
I would assume then just change your APN settings.
you can try manual operator selection, by going Settings > Wireless Controls > Mobile Network Settings > Network Operators > Search Networks then select whatever network you want to use
Hi.. I'm using CyanogenMod 3.6.8.1 on my HTC Dream and I've got the same issues with roaming. I've travelled to 3 countries last month and I had issues with connecting to GSM network.. There was error message that my sim card cannot work with specific networks.. I've tried to use auto connection and I've tried also to connect manually to specific networks, but with the same result. I've tried also rebooting and removing the battery... Problem disappeared after few hours... I had this issue in Austria, Hungary and Turkey so it's not operator/country specific. Problems doesn't exist on different cell phone (Nokia). Everything works fine after powering on the phone.
Related
Not sure if this is the correct forum but I want to be able to turn of roaming completely. I have a US G1 on the three UK network with the US RC33 installed and root. I have disabled data roaming. Here in the UK we're too small a country to want to roam! Coverage is usually good enough from a single network. However, I occasionally get the little 'R' symbol on the single strength icon and an annoying prompt saying I need to turn data roaming on because I lost connectivity. I have to go into the settings and manually select the "3" network again.
What I want is to either be connected to three UK or not connected to anything at all. Is there a config file I can edit to allow this? Would the UK RC8 firmware do this for me?
Thanks in advance for any help.
Doesn't a 3-UK SIM try to roam onto O2 though?
You could set the phone WCDMA only and NOT roam onto a GSM network.
Use AnyCut to shorcut Activity: Phone Info
From there under preferred Network Type; set to "WCDMA Only"
HELP!! Roaming signal won't go away
I have an unlocked G1, JF1.41 v 1.1 and i just updated to the RC33...but this also happened when i had RC30 , v 1.0...
I put in my canadian Fido sim card and everything works fine but i have that little "R" on top of my signal strength bar...
I think this means its data roaming? if this is the case...it should be okay (even though its going to bother me) because my service provider says my EDGE/Data is disabled (i do not have a data plan, NOR do i wish to incur any data charges.. i'm fine with my free WIFI ) .
However, if this means im roaming on another network, i dont want to be incuring any long distance charges on my phone EVEN when im using my own FIDO network..
I went to settings - about phone - status, and here are my specs (some of them):
Network: Fido
Network Type: EDGE
Service state: In service
Roaming: Roaming
Data Access: Disconnected
i'm pretty much just concerned about the ROAMING part of it... my other friends with G1's are with rogers, don't have that little R..
how do i get rid of that?? please and thanks!
Try manually changing the network in Settings>Wireless controls>Mobile networks>Operator selection
G1, like all GSM phones, will roam onto networks specified on the SIM if it can get a better signal. As long as the relevant operator has a roaming agreement in place, there's nothing to be concerned about, other than the R symbol in the status bar.
Mod: move this over to General discussion please.
I did change it and selected my Fido network (it's the only network available).
Thanks. I've set it to WCDMA only so I'll see how it goes.
Please help??? i still have that little R on top!
After I got home I found my phone had lost its connection. It didn't seem to be searching for the network. I had to go into settings, search for networks and then select three again. Is there any way to control if the phone does a search for networks automatically?
Looks like it reconnects to three on its own after a while. I still get the annoying popup about turning on data roaming though
footboydog said:
Looks like it reconnects to three on its own after a while. I still get the annoying popup about turning on data roaming though
Click to expand...
Click to collapse
As has been previously mentioned, Three will "roam" onto another network if it goes out of Three's own 3G network coverage because Three does not run its own 2G network.
However, it isn't O2 anymore, it is Orange as of late 2006/2007. I *believe* that you won't be charged any more if you use data whilst "roaming" on Orange, so whilst you are in the UK it is quite safe to allow data roaming, but I would be inclined to check this with Three.
Regards,
Dave
Good evening all,
Hopefully someone can answer my question.
Sunday I took a road trip. I noticed that my phone had no service. In the past when I left the t-mobile area my g1 would automatically connect to whatever network was available and the roam indicator would show up.
I tried to manually connect to at&t through the network operators menu. My phone said "Your sim card does not allow a connection to this network.".
I have a rooted g1 running the official t-mobile 1.6 rom. Is this a problem with my rom or my phone or the network. I've tried searching and I haven't found much of a solution yet.
I am in the usa. A lot of the google search results I got were from Europe.
might not have been a ROM issue; just a bug...
Did you reboot or force radio off then back on?
I have the same problem and yet no luck to resolve this.
NPS_CA said:
might not have been a ROM issue; just a bug...
Did you reboot or force radio off then back on?
Click to expand...
Click to collapse
I did reboot and enable/disable airplane mode.
Today I switched to the Cyanogen Rom. I'll see if that fixes the problem. I tried to manually switch to at&t, but it still says that the sim card does not allow that. I am in the t-mobile coverage area; t-mobile probably does not allow the use of a different network when their network is available. I'd like to test it out to see if roaming works now, but I'm not taking a drive out to the countryside just to see how my phone works.
I guess this one might be hard for me to test because I am rarely out the the t-mobile coverage area.
Hi guys,
I have an unlocked Vibrant from TMobile, using it on WIND in Canada. On the first day with a WIND SIM, I was able to see the WIND network, and use data as expected. Then I went to school (outside coverage) and the phone roamed to the "WIND Away" (ie: Rogers) network, as expected. However, when I re-entered the coverage area, I could no longer see the WIND Home network! I've been stuck on roaming for a few days now, and I just can't see the home network. I've scanned the for Network Operators a million times - all I see is WIND Away!
My girlfriend has the same phone, and we got her unlock code yesterday. After unlocking, she was immediately on WIND Away, too. I don't see others complaining on the WIND site, so their network must be up. What could cause this? Does Android cache the network operator list, or do some sort of automatic filtering that I can disable? This is getting pretty frustrating.
Thanks!
edit: Oh, I've tried power cycling and removing the battery.
Bump?
Also tried a factory reset... What could cause the phone to simply not see a network that I know is present and that it used to see? I live less than a block from a tower.
I don't know if I'm having issues with my phone or T-Mobile's network but I can't get any mobile data functionality. The 3G / H icon displays but any attempt to get any data sees the upload indicator active with no download activity. I've tried WiFi which works fine so it's either a problem with the radio or T-Mobile. Any UK owners on T-Mobile tonight that can tell me if there are issues? Thanks
no issues for me in se london/n kent area
That's what I thought, thanks. I had this a month or so ago where all data downloading would fail but the upload arrow would constantly be there like it was sending requests and getting nothing back. I never did find the problem and it started working a few hours later so it's likely a local issue. I'm in the North East.
i have no issues, in the east midlands
3290 kbps! that's rather fast, I live in the east midlands and don't get anywhere near that
Dyonas said:
I don't know if I'm having issues with my phone or T-Mobile's network but I can't get any mobile data functionality. The 3G / H icon displays but any attempt to get any data sees the upload indicator active with no download activity. I've tried WiFi which works fine so it's either a problem with the radio or T-Mobile. Any UK owners on T-Mobile tonight that can tell me if there are issues? Thanks
Click to expand...
Click to collapse
switch off your data with the widget and then restart your phone and switch on the data after the restart
see if that works
otherwise no problem on tmobile in north london/west london... been traving and surfing to make sure my team werent losing. i shouldn't have botherd
It's been fine in the Durham area for me, probably pulled a couple of hundred MB down today...
I hate this stuff sometimes.. I had no 3G from about 7pm last night but 2G worked fine when I finally thought to check it. I tried an hour or so ago and now 3G is back up and running. I know it wasn't the phone because it put the SIM in my Milestone and had the same problem, stupid networks!
Problem has been resolved. See my final post in this thread.
Long time lurker. First time poster.
I am having problems getting 3G data on my new phone.
Last week I activated a new Moto X Pure Edition on the Sprint network via MVNO Ting. The phone appeared to activate just fine. Voice, text, LTE, Wi-Fi, and 1x data are all working without any obvious issues. Phone is pure stock.
3G data is not working. If I set Preferred Network Type to "LTE (recommended)", mobile data works on LTE but if I travel to an area that has not yet been upgraded to LTE, it will not drop back to 3G. Further, if I choose 3G as the Preferred Network Type regardless of whether the phone is connected to an LTE tower or a non-LTE tower, I get no data connection. Same for Global - no 3G connection.
If I choose "1x" as the Preferred Network Type (whether in an LTE area or not) then the phone will establish a data connection. The phone reports this connection as 3G in the status bar but the speed is so unusable that I doubt it can be a 3G connection.
I've done a carrier wipe, updated the device config (profile) and updated the PRL, all several times. Nothing changed. I've also done a factory reset which also did not help. I did not have any issues with my Nexus 5 which the MXPE replaced. I have since reactivated the Nexus 5 with a new number while troubleshooting this problem and it reactivated just fine. No issues at all.
Questions:
1) SignalCheck Pro reports that mobile data is "unregistered" when trying to get 3G data. Is registration of 3G data tied to the SIM card or to the MEID of the phone? Trying to determine if the registration problem lies with the SIM, the phone, or the network.
2) Why would I be able to get a 1x data connection but not 3G?
3) Ting is suggesting network problems may be playing a part but I'm not sure as the problem has persisted through several cities around west Texas and eastern New Mexico and throughout Lubbock TX which has many cell towers. Is there any way this could be a network issue?
4) Is the SIM for the MXPE compatible with my old Nexus 5? I'm wondering if swapping the SIM into my N5 will help to diagnose the problem.
5) Is anyone else with a MXPE having issues with 3G data?
This one is puzzling and I need some help from the gurus. Thanks much.
DC
Bump.
Swapped SIMS with one sent by Ting to verify the problem wasn't with the SIM. Still no 3G.
DC
DC73 said:
Long time lurker. First time poster.
I am having problems getting 3G data on my new phone.
Last week I activated a new Moto X Pure Edition on the Sprint network via MVNO Ting. The phone appeared to activate just fine. Voice, text, LTE, Wi-Fi, and 1x data are all working without any obvious issues. Phone is pure stock.
3G data is not working. If I set Preferred Network Type to "LTE (recommended)", mobile data works on LTE but if I travel to an area that has not yet been upgraded to LTE, it will not drop back to 3G. Further, if I choose 3G as the Preferred Network Type regardless of whether the phone is connected to an LTE tower or a non-LTE tower, I get no data connection. Same for Global - no 3G connection.
If I choose "1x" as the Preferred Network Type (whether in an LTE area or not) then the phone will establish a data connection. The phone reports this connection as 3G in the status bar but the speed is so unusable that I doubt it can be a 3G connection.
I've done a carrier wipe, updated the device config (profile) and updated the PRL, all several times. Nothing changed. I've also done a factory reset which also did not help. I did not have any issues with my Nexus 5 which the MXPE replaced. I have since reactivated the Nexus 5 with a new number while troubleshooting this problem and it reactivated just fine. No issues at all.
Questions:
1) SignalCheck Pro reports that mobile data is "unregistered" when trying to get 3G data. Is registration of 3G data tied to the SIM card or to the MEID of the phone? Trying to determine if the registration problem lies with the SIM, the phone, or the network.
2) Why would I be able to get a 1x data connection but not 3G?
3) Ting is suggesting network problems may be playing a part but I'm not sure as the problem has persisted through several cities around west Texas and eastern New Mexico and throughout Lubbock TX which has many cell towers. Is there any way this could be a network issue?
4) Is the SIM for the MXPE compatible with my old Nexus 5? I'm wondering if swapping the SIM into my N5 will help to diagnose the problem.
5) Is anyone else with a MXPE having issues with 3G data?
This one is puzzling and I need some help from the gurus. Thanks much.
DC
Click to expand...
Click to collapse
Yes..i am having the same issue..with vodafone in india
Update. After two Moto X PE phones, numerous factory resets, much research and testing, there is now a work around to this problem. The problem does not appear to impact any phones on the big 4 networks. It only impacts phones on a Sprint MVNO.
There are now known eHRPD issues with Sprint and their MVNOs. The work around solution is to disable eHRPD. Sprint is working on changes to eHRPD that may resolve the issue permanently. Thanks to Ting for their persistence in helping get to the bottom of this problem.
DC
Final update. Earlier this month Sprint released some changes to the way eHRPD handoffs are handled and that resolved my issue. My Moto X PE now works as it should with no workarounds necessary to get 3G data.
DC
DC73 said:
Final update. Earlier this month Sprint released some changes to the way eHRPD handoffs are handled and that resolved my issue. My Moto X PE now works as it should with no workarounds necessary to get 3G data.
DC
Click to expand...
Click to collapse
How to get this update?
Sekasniy said:
How to get this update?
Click to expand...
Click to collapse
There was no update pushed to the phone and no changes to the phone. The fix was on the network side.
DC
DC73 said:
There was no update pushed to the phone and no changes to the phone. The fix was on the network side.
DC
Click to expand...
Click to collapse
So why not work 3g? Is the problem in cell operator?
^^Sprint had some issues with 3g (ehrpd) on mvno's. It would work if forced to evdo, but not ehrpd. Sprint made some changes to their network so this now works correctly. It was a network side issue.