Related
Hi i have problem some times caller id show just number when someone call me sometimes(same number) show name from contacts how to fixit
Same thing here...
Sometimes it works, sometimes it does not... Actually it has only worked a couple of times...
At first I thought I was closing the ID Contact Monitor when I used an application close button (Battery Back from Omega One). But then I noticed that it still does not work even without the app closer.
Any clues?
I believe that this is probably down to the 32 process limitation of WM2003 on the XDAII 28 processes open automatically as you open programs the XDAII will close what it thinks isn't needed any more.
Can anyone confirm? :?
Hmmm... It could very well be that... :roll:
If you don't use the "permanent save" feature, then you can delete the 4 flashman files out of the \windows\startup folder.
this gives 4 more process slots. Making the number of running processes at startup more in line with a normal XDA.
wasting 4 process slots on 4 different programs that do the same thing to 4 different databases is rediculous. Having them running even when the feature is turned off is also rediculous.
..Chuck..
Yes, thanks... I deleted the task I don't use and now IACaller is working fine ever since...
Thanks!
I've upgraded to the new ROM, and only the lesser 19 processes now, meant to alleviate this problem.
In addition, it's a newer fix of Caller ID.
And even more, I removed the FOUR flashman/mem processes from startup too.
And even then, I find after just half a day of running apps and stuff, Caller ID no longer shows a photo, and requires a reboot to work properly.
Not happy at all, not in the slightest. Not in the least bit impressed, because i see little else that can be done to fix this, so no likliehood of a solution.
VERY poor to say the least.
Shadamehr,
Are you using an application closer like Pocket Plus or Wisbar?
If not, I suggest you use one. Remember that whithout an app closer you are consuming valuable resources and the X only minimizes them.
Best regards,
Rayan
I was using SideBarX.
What I find however, is that this is the WORSE thing to use, as it closes ALL apps, so if the Caller ID HAD happened to just recently update itself, it would close that too, so in effect, closing the very thing with any potential to fix things.
Alas, I find the only thing that works, is to do a soft reset twice or three times a day.
Not a great loss given how quick re-boot time is, but a bit of a stupid solution nonetheless.
Additionally, I find another slight issue, in that if I get an SMS, when I click the notification envelope on the top bar to open it (if I had left it, not catching it straight away, so the first pop up of it had already gone) then the 'speech bubble' that appears with the message in, is REALLY slow now after the new ROM update, taking a second or two to draw itself properly. I can see the outline of the bubble for a fair while before the bubble 'draws' on screen properly.
Sadly however, it even does this after a soft reset to speed things up, so I am very concerned about this aspect of things.
It worked a lot faster before the update.
The rest of the update has been a good thing for me, but I am a bit angry about the Caller ID problem still being here at least for me, but more worryingly, I am concerned at the apparent speed slow down for some things! Especially as I have read tales of others experiencing this too.
But overall, its nothing earth-shattering I guess.
Shadamehr,
As far as the CallerID problem, at first I was having the same problems but I managed to fix this by removing unwanted items on the startup folder (remember the 32 process limit?) and by using Pocket Plus, since it allows you to exclude CallerID from closing.
I also use ScaryBear Software's Check Notifications to remove duplicate events on my system's databases.
Good luck!
Rayan
Pocket Plus? Cheers mate - I'll go search now.
Here's hoping it works.
Also, the new ROM is only meant to have 19 things running. I have further removed the four flashman files from startup.
Do you know of anything else I can remove?
Cheers mate.
Can't find Pocket Plus mate (at least not as a free app).
Any link for me please?
I don't remember what things where in the Startup folder but this is the stuff I have now:
CheckAutoRun.lnk <--- No idea what this is for
ChgDfLnk.lnk <--- No idea what this is for
ClearTemp.lnk <--- I installed this
IA_Caller_ID.lnk
MMReg.lnk <--- No idea what this is for
Pocket Plus.lnk
Poutlook.lnk
Stk.lnk
VoiceCommand.lnk <--- Microsoft's Voice Command
Cheers and good luck!
Rayan
You can find it here http://www.handango.com/SearchRedirect.jsp?siteId=1&jid=2BD54724B6D87D58BA6CB6BA8BB79B81
Cheers!
Hi all,
I've the problem with with my XDA II and IA Caller ID. It works for one or two hours and then impossible to see a picture. The only thing to do is a soft reset.
I've checked the processes and I'm now with 16 processes (using PHM Task Manager to see the processes) and when the problem occurs, the IA_Caller_ID process is still active.
For information, I use WisBar advance to really close my programs and I kill ActiveSync every time I leave the XDA from the cradle.
Thanks for your help...
hello,
Do you put pictures in your SD Card ?
If yes, try with pictures in your phone memory.
I have the same problem with ringtone in my old Qtek (first generation SPV by Orange)
Sometimes, the sdcard is poweroff to preserve battery life...
test and come back ;-)
THe picture is in "/my documents" none on the SD card
Now it's new, sometimes the XDAII doesn't ring at all. The screen lights on but no ring and no information. :shock:
I have an XDA Wizard (obviously) with Slide2Unlock and Mortplayer. I want to be able to play my music with Mortplayer when the screen goes off, otherwise I have to keep tapping it.
Please can somebody help me and tell me what to do.
Thanks!
The response time is pretty bad o nthis forum, anywhere else I can post this? Its pretty important to me.
Are you sure Mortplayer doesn't have a background play mode or an "idle screen off" override?
Most music apps let you power off the screen but continue to play.
Try my VJEschaton to switch the screen off (I think).
V
There are a pile of options about energy and screensavers but none og it seems to work when the screen is actually off
Has anybody had experience with mortplayer?
EDIT: After a bit more messing around, I found that there is a screensaver thing which can be used.
Hello, I've just been thinking about using our devices in the car and have an idea, that I'm not sure has been developed, but I think would be useful for a lot of people on here:
It's nothing fancy, but I would like an application that allows programs to be made active by pressing a button. What I'm thinking is that if I'm driving I would like too have ready access to a handfull of applications (TomTom, MP3 player, FM Radio, G-Meter, Google maps, phone)
How this would work is that when the program is running a button press would move to the next application in a pre-defined list, and a second button would move to the previous application in the list. The 'next' and 'previous' app buttons should be configurable to take into account peoples devices and their preferences and the applications on the list and their order should be fully configurable.
As I said, the idea is to make using the device in-car a bit more practical, so I would like a couple of additional features, the application could be setup with a number of startup options, for example I would like to run the application and have it load up any of the listed applications that aren't already running and have a specific application as the default start position. I'd also like wi-fi to turn off if the phone isn't on charge and bluetooth to turn on and connect to my headset. Other options people might want are to turn the phone off, turn 3g off or close all other programs, or anything else to improve performance or battery life., such as turning off g-sensors, light sensors etc. it would be good if the notification preferences could be changed, so that for example emails don't pop up over TomTom, or a separate screen that shows the new message enlarged to full screen perhaps, then goes back to TomTom. Closing the application could also return everything to the way it was before hand. I'm sure you all have loads of ideas for in-car options as well.
I'm basically thinking, one screen press and the device becomes optimised for use in-car, close the application and it goes back the way it was.
Anyway, I'm just thinking out loud, I don't have the skills required to take something like this beyond the ideas stage as my programming skills don't extend beyond modifying other people's html, but I'm hoping someone will see this and think its a good enough idea to be worth putting into practice.
Cheers
Paul.
No one think this would be useful?
I like the idea, but to develop it could be a bit too much...
for use in car especially with tomtom i believe that task managers like dynamo, taskfacade or mortbuttons are very useful:
one button and you switch from apps to apps without stylus...
having already used it while driving, i think its very comfortable to use...
another existing app that can be useful is voicecommand... clik and speak to run the app, it works great if your car is not too noisy (so not in my case lol )
Oh ok, I'll have a look at those programs, see if I can make those work. The only thing I'm thinking is that it might be quite important to have two different setups for in-car and normal use.
Don't suppose you know any apps that can be used to turn on bluetooth and attach to my headset through on press of the screen do you?
ht buttoon sllows you to use one button for multiple applications, but i dunno about the task manager stuff.... basically you want a program from different profiles, kind of like airplane mode
Might not be exactly what you are looking for but what about using a launcher like Throttlelauncher and setting up a custom tab with only the application buttons you need to use in the car? At the moment I use TomTom and Audio Manager together and find it very easy to switch between the two while driving using Throttlelauncher.
Not sure about notifications off though - maybe a script?
Just my thoughts out loud too.
its too hard to develop i hope u r thinking motivate someone
Thanks for the replies, I'm playing around with Mortbuttons to see if it'll do what I want and will have a look at a few other things.
A couple of people have said it is too difficult to develop, I know I don't know very much about whats involved, but I would have thought it would be much easier than most of the applications that are developed on here. What I'm looking for is basically a script that when run will load a list of applications, then use two of the hardware buttons to 'scroll' from one app to the next. I did list other things that would be good additions, but the basic premise seems pretty straightforward and wouldn't have any graphical element, other than the configuration menu.
Anyway, if someone wants to have a go, I'm sure it would prove very popular with the drivers on here!
Cheers.
Just create your own theme using something like WAD2.
Hey there guys, just a quick one for ya.
Has anyone come across a problem with HTC Addicts cleanRAM?
when i click the the icon to clean it starts the process but then runs my email application(default HTC app) also.
It started doing this yesterday with no changes made to my registry or other device settings.
I've tried un-installing the program and then re-installing but i still get the same (annoying) result.
Has anyone else encountered this? and if so do you know of a fix?
Many Thanks
Sharingan
Well, for me, when I run the Level 3 purge, it takes me to the dial-pad screen for a few seconds. Never really bothered me though...
dial pad
level 3 takes me to dialpad also, wierd, but works ok,,
I also get this with Level 3.
...and for me as well.
This is just how it goes with cleanram. If you have done a customized process list than I would suppose thats why it's bringing up your email because it's purging anything in your list so if it's not running already it will bring it up to purge it to make sure it's not in the memory anymore.
Yea the thing is, i haven't ran a custom purge, i just do Level 3, and it doesn't just pop up, it keeps it open :s Thats why it was annoying for me, doesn't look like there is any kind of fix, just something we have to live with. Thanks for your input!
same here
I think I have the problem that after Cleanram, My Contacts and Programs wont open at all. Then calender says Error: Not enough program memory to start program...
This is a great tool but it keeps doing this to me...
I do a level one purge or 2, same thing happens..
any ideas?
feyt said:
I think I have the problem that after Cleanram, My Contacts and Programs wont open at all. Then calender says Error: Not enough program memory to start program...
This is a great tool but it keeps doing this to me...
I do a level one purge or 2, same thing happens..
any ideas?
Click to expand...
Click to collapse
Don't use Clean RAM, lol. It's not like you need to use it. I have 576Mbs enabled and I never use Clean RAM, most of the RAM used is just cache so your most commonly use programs will open faster if you don't use it.
I've never got any slow down from not using it.
Hello there,
I am an iPhone Jailbreak user, who has always been curious about the capabilities of an Android phone to see if it matches upto anything the Jailbroken iPhones can do in my own perspective. I've posted on other communities before to ask these questions but since I got no real good answer, I decided to buy an old Nexus 4 phone (running v5.1.1 i believe) to see what the Android can do myself.
Now, I've noticed that with these "Dual Screen Browsers", specifically the "Dual Screen Browser" and the "DualScreen" app has this capability of when you have a Flash Video playing, and if you go back to the Home screen, it continues to play the video in the background. My understanding was for Android, because it uses an OOM memory management system, playing videos as if it remained in the foreground should not be possible, but some how these two apps are able to do this.
I also realized the app "Floating Apps" also achieves a similar effect of playing any Flash videos in the background. although for this it seems like it leaves a tiny icon floating around the phone. which seems totally fine. i would assume this behavior can be made available to all apps with an option to disable this feature (including games)
Could anyone shed light to how these three apps works, and what allows them to do this? Can this behavior be mimic'd for things like a Game app?
Or could anyone point to a better forum to ask these questions?
Since I now have an Android phone I can actually try out whatever suggestions may pop up so this is exciting.
Thank you all in advance.