I followed the dummies thread and hpsl path and it was all good.....now what do I do? tried downloading the 6.5 r8 file but it gets stuck at 0% total newbie here need some help! do I need to flash 1.59 rom? looking for follow up to the dummies thread but found nothing.... I want... no I need 6.5 on my HD.....please some one help me!
druksoth said:
I followed the dummies thread and hpsl path and it was all good.....now what do I do? tried downloading the 6.5 r8 file but it gets stuck at 0% total newbie here need some help! do I need to flash 1.59 rom? looking for follow up to the dummies thread but found nothing.... I want... no I need 6.5 on my HD.....please some one help me!
Click to expand...
Click to collapse
If you want HSPL download the HSPLWrapper_Blackstone_156OliNex.zip from the Dummies guide
Unzip it to desktop
Turn your phone off
Hold Volume down key and turn on phone at the same time (this is Bootloader Tricolour screen)
Plug in you USB cable, you should see serial change to usb on bottom of your phone
left click on the file you downloaded and follow the screen that comes up ...easy
After that its the same process with a new ROM
Get to that step and we will help from there
Related
Hi,
What is the RUU to run after the custom bootsplash (ftp://xda:[email protected]/Gene/1.10-Olipro.zip) ? Can we use any RUU?
I saw this on one of the posts by orefkov back in those dark days of not having a forum.Created everything up to gene_splash.nb. I dont know how to run a txt file as stated in the readme. Should it be saved as an exe in order to create the RUU signed.nbh?
You need start command prompt - (at WinXP Start -> Run -> cmd.exe -> Enter)
at command prompt change directory to dir with nbhgen.exe, sample.txt, gene_splas.nb:
cd c:\PathTo\Dirs\WithFiles
after type
nbhgen sample.txt
RUU - you need use RomUpdateUtility for GENE.
You can got it from official rom.
Or download from _http://4pda.ru/forum/attach/1241109/______WinRAR.rar
Still get an error message:
"F:\Documents and Settings\Xxxx>FlashBootSplash\nbhgen sample.txt
NBH Generator ver0.1 by bot
cannot open script file"
What am I doing wrong?
PS: When are they having an english version of the site?
do it step bu step
gene_splash.nb, nbhgen.exe and sample.txt from archive must be in same directory.
ok i'll try it too.
hey but wht i'll it do. give some details plz. i m a newbie
WWE Official ROM needed for Gene
Dear All,
Please provide the WWE official ROM WM5 require as I installed a ROM from "http://rs169.rapidshare.com/files/53225336/HTC_Rom_upgrade.exe" link but it has currupted file and my phone stucked on 100% in boot loader, do not go further. (Please Help)
Its been all this time still cant get this thing to work. Only get as far as 'gene_splash'.Did everything step by step more that twenty times, same error. Could somebody make me a RUU signed with this picture? Would it work if I simply stick it in the same folder?
Vukile said:
Its been all this time still cant get this thing to work. Only get as far as 'gene_splash'.Did everything step by step more that twenty times, same error. Could somebody make me a RUU signed with this picture? Would it work if I simply stick it in the same folder?
Click to expand...
Click to collapse
there you go brother... signed ruu created with ur boot splash image.... the ruu to flash can be used that is found here
http://forum.xda-developers.com/attachment.php?attachmentid=67272&d=1201220336
ababrekar said:
there you go brother... signed ruu created with ur boot splash image.... the ruu to flash can be used that is found here
http://forum.xda-developers.com/attachment.php?attachmentid=67272&d=1201220336
Click to expand...
Click to collapse
Like Frank Lucas would say: My man! Added this image to my startup too.I am reasonably pleased.
Gene100 htc P3400 Stuck
my htc P3400 Gene100 is stuck at Boot loader trycolour screen with ONBL 1.07.0000, SPL 1.07.0000, . I tried many roms but at the end a message is displayed "corrupt image" . Brother help me how to recover my Gene. I love it .....
Gulfraz said:
my htc P3400 Gene100 is stuck at Boot loader showing White screen with Monogram and ONBL 1.07.0000, SPL 1.07.0000, GSM 02.71.90 and OS 1.7.0.0 and then doesn't move further. It doesn't synchronize. Brother help me how to recover my Gene. I love it .....
Click to expand...
Click to collapse
try flashing it again wid a correct rom....is ur gene an old one or the new one....
check these links:
http://forum.xda-developers.com/showthread.php?t=366505
http://forum.xda-developers.com/show...54&postcount=5
http://forum.xda-developers.com/showthread.php?t=351234
hope this helps
and yea...better use the search function nex time.....it saves time
Boot load problem
It is an old one. Can u help me to run it again. Please.....
download this rom or anyother roms available on this forum but be sure that you use roms which are cooked for old gene.
format your sd memory card with fat32 on a pc and paste the geneimg.nbh (Rename any firmware for the Gene of ruu_signed.nbh in GENEIMG.nbh) file from the rom folder into the memory card.
insert the memory card back into the gene...switch off the unit and press camera button + power button
bootloader runs,strips of different color on the screen
follow the instructions on the screen (Power button to confirm the update) and forward (I took 5-7 minutes, at the beginning)
the whole process wud take about 10-15 mins approxs
hope this helps u !
kooolchief said:
download this ...
hope this helps u !
Click to expand...
Click to collapse
Don't screw up the guy! Don't help if you are not sure.
This is not a forum for this stuff got to Gene Upgrading etc. forum.
The guy has not HardSPL his device, if he is succesful in following your method. He will brick his device and will have to take it to service center .
@Gulfraz: There is an excellent tutorial on "Gene Upgrading etc" section, go there and follow it step by step, you will be able to update your Gene.
Gulfraz said:
my htc P3400 Gene100 is stuck at Boot loader trycolour screen with ONBL 1.07.0000, SPL 1.07.0000, . I tried many roms but at the end a message is displayed "corrupt image" . Brother help me how to recover my Gene. I love it .....
Click to expand...
Click to collapse
Try this I am 100% sure This will solve your issue.
http://forum.xda-developers.com/showpost.php?p=2784291&postcount=66
@ bhushangahire
he has an old gene...and the link you provided works for new gene bricked by old gene_hspl
bhushangahire said:
Try this I am 100% sure This will solve your issue.
http://forum.xda-developers.com/showpost.php?p=2784291&postcount=66
Click to expand...
Click to collapse
@Addicted2xda
sorry mate...i missed that hard spl thing !
if ur problem is not solved
hi
is ur issue resloved if not go to the stiky by Krazy its the first in the section namly gene upgrading etc chek it out it has a clear tutorail and all tools to do the HSPL it is given for old and new gene pls read it do what it says and im sure ur problem will be solved
Gulfraz said:
my htc P3400 Gene100 is stuck at Boot loader trycolour screen with ONBL 1.07.0000, SPL 1.07.0000, . I tried many roms but at the end a message is displayed "corrupt image" . Brother help me how to recover my Gene. I love it .....
Click to expand...
Click to collapse
HI,
Thanks for POF and other forum members.
I upgraded my DOPOD C800 with WM6. Used POF HARD-SPL and Official HTC P4350 ROM.
Thanks
Jose
Can you mention the ipl and spl of your c800 before you had gone about with Hard-spl?
murali509 said:
Can you mention the ipl and spl of your c800 before you had gone about with Hard-spl?
Click to expand...
Click to collapse
Hi mine is- before upgrade
SPL 1.09.0001
IPL 1.09.0001
ROM 1.7.707.3 WWE
ROM Date 11/01/06
Radio 2.69.90
protocol 4.1.13.30
Ext rom 1.7.707.106
OS 1.7.0.0
I also have a Dopod C800 with the same ipl & spl. Can you direct me to the POF Hard-Spl files that you used? I have the HTC P4350 WWE WM6 RUU. Any help is greatly appreciated...scared to death I'll brick the phone!
How i upgraded My DOPOD C800
STEP I:
Download the following files
1) USPL --- Flah centre.rar file from
http://www.mediafire.com/?axtm5qlmbli
2) Official RUU -HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe
3) Make sure ur computer is always power on...not hibernated
Step II:
1) Create 2 folders eg:flash and rom.
2) Extract flash centre.rar in flash folder
3) Extract HTC_P4350.... ship.exe in rom folder .
( Use winrar or simply double click the file. It will start the upgrade window ,click next, then hold.Go to the temp folder, u will find all the extracted content there.Copy all the content to the new rom folder. After that cancel the upgrade window.)
4)After extracting the content in the rom folder ,*****delete the SPL.nbh file ****
Step III:
Connect your phone to the computer, make sure activesync is enabled (green icon)
Step IV
1)Open the flash folder --- follow the read me file in this folder
ie
2)Run herald-uspl.exe on your computer and follow the instructions on screen.
- it will run in command window and ask u to enter the values..follow the screen
After 2/3 steps if will ask u to chk the device-- the activesync green icon in ur computer will become grey and the screen of ur mobile will be blank-white.
!!! now u have sucessfully hard spl ur device!!!
**** dont touch or remove the connection or close any program****
3)After this it will start the RUU program ,follow the instruction ,click update ( u wont find any previous ROM installed),it may or will show ERROR [240] : FILE OPEN
clik finish/cancel and exit **this program only**.
4)Now without removing anything open the rom folder and clik the ROMUpdateUtility.exe file and follow the instruction.
thats it. ur mobile will be upgraded. dont get panic...it will take some time and the mobile will be white in colour.
Thanks
Jose
C800 upgrade success
Upgraded Dopod C800 with same IPL/SPL/RADIO parameters as mjose using his directions and it worked like a charm. Am WM6 with no issues now.
Thanks POF and mjose and everyone else on the forum for your help!
WHen using Herald-USPL - it is NOT permanently HARD-SPL!!!!
Please check the SPL now - and report....
if it doesn´t show 4.70.yang - then it is only USPL = temporarly CIDunlocked= NOT HARD-SPL
thx.
How much free memory did you get by upgrading to official HTC WM6? I got only 25mb free with no extended rom install!
C800 USPL vs Hard SPL
Poppamopps, you are quite correct. The update I performed was NOT Hard-SPL. I would prefer Hard-SPL but my understanding is that it should not be used on a device with IPL/SPL below 4.0. I am 1.9 both IPL/SPL.
Is there now a HARD-SPL that is safe to use on the Dopod C800 that is below 4.0 ?
billy-the-t said:
Poppamopps, you are quite correct. The update I performed was NOT Hard-SPL. I would prefer Hard-SPL but my understanding is that it should not be used on a device with IPL/SPL below 4.0. I am 1.9 both IPL/SPL.
Is there now a HARD-SPL that is safe to use on the Dopod C800 that is below 4.0 ?
Click to expand...
Click to collapse
nope. BUT try USP for falshing an official HTC rom with higher SPL and then HArd-SPL....
NICE! I successfully upgraded my C800 to wm6 using mjose instructions. Thanks to mjose and to all those involved.
Thanks to mjose, UPGRADED
Followed exactly what mjose said. Successfully upgraded. Thanks to everybody
Any idea how to install touch flo now?
C800
ROM: 4.17.405.2 WWE
need help please!
tried updating following mjose's listed method exactly, but failed after the screen went blank, and now my c800 seems to be dead (or bricked?!). can't even power on now. is there any way to revive it, or do i now have an expensive doorstop?
longj49 said:
need help please!
tried updating following mjose's listed method exactly, but failed after the screen went blank, and now my c800 seems to be dead (or bricked?!). can't even power on now. is there any way to revive it, or do i now have an expensive doorstop?
Click to expand...
Click to collapse
managed to do a hard reset but failed to restore, the screen now is green in color and showing:
IPL 1.09.0001
SPL 1.09.0001
then it's stuck there unless i remove the battery.
can anyone help please?
longj49 said:
managed to do a hard reset but failed to restore, the screen now is green in color and showing:
IPL 1.09.0001
SPL 1.09.0001
then it's stuck there unless i remove the battery.
can anyone help please?
Click to expand...
Click to collapse
i'm assuming nobody was awake. when you were posting....but i could be wrong.
i have no idea what a green screen means other than it's green hehe... and have never flashed a dopod.. but i'll pretend it's a herald?
can you put it in bootloader mode????
soft reset(put stylus in the hole)... and hold down the camera button..
you should get the tri-color screen..
mv3 said:
i'm assuming nobody was awake. when you were posting....but i could be wrong.
i have no idea what a green screen means other than it's green hehe... and have never flashed a dopod.. but i'll pretend it's a herald?
can you put it in bootloader mode????
soft reset(put stylus in the hole)... and hold down the camera button..
you should get the tri-color screen..
Click to expand...
Click to collapse
hey thanks! yes. i've got the asian herald. i got into bootloader mode as per your suggestion - is that the one with red/green/blue horizontal bands with a thinner white band at the bottom? ok what should i do next?
i was able to run the ROM Update utility after that, but got an error 300. checked the documentation and found out that i used the wrong version for my phone, which was RUU -HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe. would you know which one i should use?
i'm guessing your phone is not an English phone?
you need to find the native RUU for your phone.. Taiwanese Mandarin> HK Traditional? Japanese?.... if you can find it, then put your phone into bootloader and run the RUU file from your pc.
other than that, I don't know if anyone here has access to asian RUU's
doesn't look good, can't seem to find my region's wm6 rom anywhere. even tried to restore using the original wm5 rom from htc website, but still getting error 300. i think running herald-uspl.exe initially could have somehow caused some corruption.
well, i might have to visit dopod's service center soon.
thanks for your help, mv3, greatly appreciated.
did you try looking for official ruu from asia.htc.com
I suggest you load that before going to the repair centre
please am using a wp7 rom. Can anyone please tell me how i can flash the 2.10 radio and also provide me a link to that radio. thank you vry much....
Hi!
Link - Just look in the WM 6.5 forum for the HD2 There you will find the master radio thread with everything you need!
As far as flashing goes its fairly simple:
1. Boot phone in tri-color bootloader (hold down vol down while turning on the phone)
2. Run the extracted .exe you found in the master radio thread
3. Unplug phone when download complete and boot normally
That's it!
/Anders
alright
thank u very much.it really helped.
Well i got my friends Surround to jailbreak
And i am new to all this Windows stuff
o.s verdion 7.0.7390.0
The first step is to Use chevron
But as i have read somewhere it seems that i need to downgrade
SO can i please please get a link to the appropriate firmware to be downgraded to ??
Step 2: I need to use http://forum.xda-developers.com/showthread.php?t=1195647
Ill get that right
And then i will have to flash this ROM ?
http://forum.xda-developers.com/showthread.php?t=1489953
Please do help me
Anyone please ????
I tried installing the Pre Nodo update
But it gets stuck at 10%
Downgrade OSPL Tutorial For Surround
Qwerty123 \m/ said:
Anyone please ????
I tried installing the Pre Nodo update
But it gets stuck at 10%
Click to expand...
Click to collapse
Download Attached ansar's_Custom_RUUextract the contents of *.zip
download Mondrian Cingular 1.xx Radios From Here
extract the contents of *.7z
copy SPL_Signed.nbh from stock folder to same folder as RUU
bring your Mondrian into Bootloader (Tri-Color Screen) By Pressing Sound Down Key and Power on key
connect your Mondrian via USB to your computer
execute ROMUpdateUtility.exe
follow on-screen instructions
And Then Try http://forum.xda-developers.com/showthread.php?t=1195647
The Procedure Shown By Dft Using DFT_XSPL_WP7FG1.rar
hy people i have problem with my htc blackstone. Now he is on nand android and how i back to windows mobile
please help or links thnx in advice
mladjo
mladjo976 said:
hy people i have problem with my htc blackstone. Now he is on nand android and how i back to windows mobile
please help or links thnx in advice
mladjo
Click to expand...
Click to collapse
Read more about Flashing and the WM ROM files in the ROM development threads to be comfortable before trying.
1. Flash HSPL 1.56 Olinex. Instructions here:
http://forum.xda-developers.com/showthread.php?t=505377
2. Download WM6x ROM. One of the better examples in this thread:
http://forum.xda-developers.com/showthread.php?t=1719627
3. Copy ROM file (RUU_Signed.NBH) to the root of your microSD.
Rename the file to BLACIMG.NBH.
4. Switch off Blackstone and insert microSD with BLACIMG.NBH file.
5. Hold VolumeDown + Power keys until Blackstone shows 3-color screen.
6. 3-color screen will go to white screen to ask you whether or not to go ahead with ROM update.
Press Power key to proceed with update. It will take 4-5 mins.
7. When Blackstone screen show "Update Successful", it means flashing is completed.
a. Remove and re-insert battery
b. Power On.
Blackstone will proceed with the installation of the operating system files. It will take about 4-5 minutes.
When the progress bar is completed, Blackstone will restart itself WM6x the first time. Just customise and use.
HSPLWrapper sits at 0% and gets error 262
chan.sk said:
1. Flash HSPL 1.56 Olinex.
Click to expand...
Click to collapse
i have:
SPL-1.54.0000
running: FagyiDROID-V1
all the other stuff from this thread: http://forum.xda-developers.com/showthread.php?t=1914723
i have the problem that the HSPLWrapper_Blackstone_156OliNex.exe sits at 0%. The status bar is also displayed on he phone but sits at 0% also. after a minute or so i get an ERROR 262, the recovery doesn't work, phone still boots into android afterwards. when i manually boot into bootloader while recovering the HSPLWrapper continues updating but stays at 0% and i get the same error again. the bootloader still displays SPL_1.54.0000
what can i do?
You can still flash back to WM while on SPL 1.54.
Just bypass the HSPL process and carry on with Step 2 onwards.
After installing WM6.5, you can still do a separate upgrade to SPL 1.56 Olinex at a later time. The upgrade of SPL is a separate process, and does not affect the WM 6.5 on the phone. I had done this before - install WM 6.5 with SPL 1.54, then flashed HSPL 1.56 Olinex - no problems, no need to re-install WM.
For upgrade SPL to HSPL 1.56 Olinex, if you still encounter error with SPLWrapper_Blackstone_156OliNex.exe, go to the Tutorial for flashing
http://forum.xda-developers.com/showthread.php?t=505377
Post #2
Carry out the instructions according to the Troubleshooting - manual SSPL section. I had guided some other folks who got Error 262, and it worked.