ok i have a mogul 6800 and have not used my hard buttons for some time now. the scroll wheel works, round nav. button and power button. nothing else works while normal use. but heres what i dont understand, i can still hard reset my phone, and also put it in bootloader mode. but under normal circumstances they do not work. can some one help. i have taken it completely apart to see if by some chance something come lose, but nothing. also have tried a stock rom, several custom roms,and still get the same out come. is there a hardware upgrade by chance that might restore button function .
anybody?
not even a little help? something?
Wish someone smarter than I could help us out on this because mine is doing the same exact thing.
At first, I thought maybe the chip that worked those buttons failed but they work...for some things?? An example is my camera button will not open the camera but when I hold it and the power button and press reset, it will go to bootloader. My softkeys do not select and start the assigned program but when I hold both softkeys and press reset, I will do a hard reset.
I have tried reflashing my DCD 3.2.6 ROM, as well as several other DCD ROMs and Ryan's ROMs but the problem persists.
Related
For a while now I've had problems where all the hardware buttons on my 8125 do not function properly. Specifically, the IE button doesn't start the browser, the messaging button doesn't start the messaging app, the phone buttons don't start the phone app, etc...
The camera button occasionally works to start the camera program but stops working after that first press. All the other buttons, including the slideout keyboard do not work at all, with the exception of the volume button, as noted below.
Another symptom is that the volume button, if I forget it's broken and push it by accident, will cause the volume app to popup and try to adjust itself up or down repeatedly. It's obviously thinking the button is stuck.
I know this has got to be a software problems since they all failed at the same time. Does anyone have any idea what might cause this problem and how I might go about troubleshooting it?
I have done a hard reset twice to no avail. The phone was literally 30 days out of warranty when I first reported it to Cingular/AT&T and they wouldn't cover it.
Re: Hardware buttons
Bump. Anyone got any ideas? I can't be the only person that's had this happen.
I just finished flashing the ROM so I went from 1.08 to 2.25 and still no joy.
Earl
Hi all,
This is my first thread after being around with the availble great roms for awhile, this morning I came across a weird problem, somehow when I try to hard reset my X1 ( 2 silver buttons, reset button with stylus ) it just reboots back, like a soft reset. So instead giving me the hard reset options, it just boots like normal with the SE logo etc.
This is the same when I try too enter the rainbow bootloader screen, device shut off, removed battery and reinserted. But when I press volume down and power button, is just reboots as normal.
The weird thing however is, that I am able to flash roms when I use the ruu tool, it just goes to rainbow screen by itself, I just cant do it myself with the hardware buttons, or do a hard reset! This always worked.. Any ideas ?
Edit : I reflashed hard-spl, did nothing to solve this.
Thanks!
To hard rest, it's the soft keys and the main power button, not the with the reset button.
Sfkn2 said:
To hard rest, it's the soft keys and the main power button, not the with the reset button.
Click to expand...
Click to collapse
no as long as your holding the two front soft keys when the phone powers on it should go into hard reset. but it only works properly for me when i use the reset button.
make sure your holding the two front keys until the HR screen comes up, again, don't just press them once, HOLD them until it says in blue writing on grey background, press r to reset then press the r on the keyboard to HReset
this is the same for entering bootloader, hold volume down (and make sure it is down not up) and power until you get the rainbow screen
Weird thing is, I know how to do these two tricks.
I did like 20 hard resets with the two soft buttons etc.
Same goes for bootloader, only that isnt a big problem cause
I found out I can use enterbotloader.exe in windows map. Maybe
theres a shortcut for the hard reset too? Thanks
js1987 said:
Hi all,
This is my first thread after being around with the availble great roms for awhile, this morning I came across a weird problem, somehow when I try to hard reset my X1 ( 2 silver buttons, reset button with stylus ) it just reboots back, like a soft reset. So instead giving me the hard reset options, it just boots like normal with the SE logo etc.
This is the same when I try too enter the rainbow bootloader screen, device shut off, removed battery and reinserted. But when I press volume down and power button, is just reboots as normal.
The weird thing however is, that I am able to flash roms when I use the ruu tool, it just goes to rainbow screen by itself, I just cant do it myself with the hardware buttons, or do a hard reset! This always worked.. Any ideas ?
Edit : I reflashed hard-spl, did nothing to solve this.
Thanks!
Click to expand...
Click to collapse
I have the exakt same problem I use smabergs latest rom, and I cant hard reset or enter tricolor screen, please anybody know how to solve this?
Hi Guys, first problem in years:
Just flashed a new rom to my HD2 (like i do every 2 days), and suddenly my send (green phone) and start (windows key) control the volume, so when i press the send key my volume goes down and when i press the windows/start menu key the volume goes up. i've tried several radios and tried several roms to see if the problem solves but the keys are still disfunctional.
http://forum.xda-developers.com/images/icons/icon6.gif
Anyone ever heard about this problem? Because google does not. (me neither)
I would be very helpfull for the one who can help me.
Thanks in advance,
Greetz Robin030
I don't know the answer but if you can
reverse engineer it and figure out how the keys got remapped you would be hailed as a genius, as it does not seem that anybody else can remap them correctly. Does your original volume keys still function correctly? What does your buttons app in settings say for how they are mapped?
Yes
johnboatcat said:
reverse engineer it and figure out how the keys got remapped you would be hailed as a genius, as it does not seem that anybody else can remap them correctly. Does your original volume keys still function correctly? What does your buttons app in settings say for how they are mapped?
Click to expand...
Click to collapse
Thank you for your reply, yes my real volume keys still function correctly. My button app in settings say that only the send key is mapped (this does work when i long press the send key).
I tried everything but it just doesnt go away, is this rom or radio? Because i reset them both, also used mtty.
Thanks in advance,
Robin030
Anybody?
Did you run a Task 29 before
trying the new Roms and Radio's? Clean her out good! You might need to take it back to the original standard official SPL, Rom and Radio and see if the problem persists. Needs to be there anyway to return for warrenty.
johnboatcat said:
trying the new Roms and Radio's? Clean her out good! You might need to take it back to the original standard official SPL, Rom and Radio and see if the problem persists. Needs to be there anyway to return for warrenty.
Click to expand...
Click to collapse
HI,
I tried task 29 several times, i took it back to official SPL, rom and Radio but the problem persists. I just returned it to the provider's service point. So this thread could be closed, but i still would like to know the problem; but i think nobody could get me one (am i the only one with this problem?).
Thanks!
I had an energy rom on my hd 2 until the weekend,
The phone was off so when I powerd it up the screen went straight to volume up, (like the up volume button was stuck.)
I tried doing a hard reset but couldnt get it to work, like the buttons werent working, so I reflashed with a stock rom.
Now the volume buttons , phone button and back button dont work anymore.
Even tried to put phone into bootloader mode but no joy there either.
Anyone one think this is hardware, or is it software.
Thanks for any help.
Hi,
I have a similar problem describe here. My problem seems to be a software issue cause my volume buttons work perfect on software but they don't work during startup.
I just bought and installed this unit in my 2010 Prius from a seller on Ali Express
I want to install a custom ROM on it but first I want to make sure I can successfully boot into recovery in case something goes horribly wrong. The seller REALLY doesn't want to share that information with me, so I was wondering if someone here might know how this is done.
If you have a reset button...
Press it (with toothpick) and hold it pressed until you see blinking the lights of buttons...then release and press it again until you see the lollipop logo. Release it and you will be on recovery menu.
You can move on different options from recovery by pressing quickly the reset button and choose an option by holding pressed the reset
if I did help you, please hit "thanks" button
ikerg said:
If you have a reset button...
Press it (with toothpick) and hold it pressed until you see blinking the lights of buttons...then release and press it again until you see the lollipop logo. Release it and you will be on recovery menu.
You can move on different options from recovery by pressing quickly the reset button and choose an option by holding pressed the reset
if I did help you, please hit "thanks" button
Click to expand...
Click to collapse
So I tried that, but on my unit when you press the reset button all the light go out and stay out until the button is released. The only time I can get the lights around the buttons to flash three times is when I release the reset button and hold down the power button. But when I release the power button and hold it down again after the flashes it just repeats the three flashes again like the first time. If I release the power button at any time it just loads up like normal. If I hold it down again when the lollipop logo comes on it just goes blank and repeats the three flashes again. If I press the reset button it just resets the unit again, if I hold it down it does nothing until I let go, then it resets the unit again like normal.
The three flashes seem like they mean something but I can't figure out how to get to the next step of actually starting the recovery. I want to flash a custom rom but I am afraid to do it without the safety net of being able to get into recovery if I need to, you know?
any update
I also want to buy this unit, but I'm just not sure:
Does it connect to all the functions of the Prius 3? Camera? Microphone? Steeringwheel buttons? Other?
Or do you need extra modules? Which?
Are you enabled to edit the basic car functions from it at least?
Found the thread on google, waiting for someone custom rom it, its good, everything works excepts its buggy, sometimes camera dont work etc that is why i also want a simlle custom rom on it
Edit: solved here : https://forum.xda-developers.com/an...pment/mtcd-intel-sofia-units-wifi-3g-t3533154
Could you explain me how? I have same screen but I don't even get those 3 lights pushing both reset + power at same time. Thanks
Hey guys, so I have this media and my camera doesnt work, I just bought this car and when i put to reverse just yellow triangle appears, i found on google that they might be a solution in my factory settings, but I dont know the password, so do any of you know it, i would apreciate any kind of help, thanks.