Screen No Response but Occasional Response HELP - Touch GSM General

Hey I have an elf the T mobile version 64/128mb , phone has been working for 8 months now all of a sudden it wont respond but the call and end call buttons work fine the 4 way navigation key only work when lets say you go into the call records by pressing the green call button. You cannot do anything besides change time, answer calls and hang up. Please Help Tried hard reset soft reset, and the phone is unlocked to all networks using the network key method.

this looks a hardware problem may be the LCD or the digitizer

Is it fixable by software or maybe opening it up to fiddle ?

It is not the LCD, it is only the digitizer (the thing that is responsible for the 'touch') I recently had the same problem, until 1 week ago I purchased a new digitizer off eBay for $15.
Do not get LCD and Digitizer, just the digitizer to save money.
If there is no cracks or damage to the screen (bad cracks, pixel damage etc) you only need a digitizer.
I have a video I made of me changing mine which I'm editing atm. I do have photos.
This is the correct response. It is not software if it started to work occassionally and then stop, this is what happened to mine. 99% it is digitizer!

Thats cool please email me link [email protected] for your video I will order one now.

http://www.google.com/search?hl=en&...nge+digitizer+htc+touch+youtube&aq=f&oq=&aqi=
See the 3rd result.

Hey I read its going to ttake 14 days for my digitizer to come , in the mean time is there a way I can bypass the touch the screen alignment page when you first boot up?

you can get www.mymobiler.com
Cheers.

Tried it but requires you to accept the installation on the phone any other ideas?

Thats weird, mine doesnt.
it will auto install.

It says on the little status box installing mymobile to the phone then it dissappears saying not connect. this message comes up everytime you try and run it.

Sorry, I ran out of brain juice.
You have to stick with this for a while than, and bear the bitter pill.
MyMobiler should be able to install onto the phone itself.
But I really wonder why this doesnt work.

Hey thanks anyway found this whiel browsing aroudn on the internet fixed the problem it aligns the screen for you http://216.139.221.18/downloads/mobile_speak_pocket/release/MSP_RemoteAlignment.zip

varyjam said:
Hey thanks anyway found this whiel browsing aroudn on the internet fixed the problem it aligns the screen for you http://216.139.221.18/downloads/mobile_speak_pocket/release/MSP_RemoteAlignment.zip
Click to expand...
Click to collapse
and it does auto install its the part where it asks you to accept remote.exe and you have to tap yes or no for it to run on your device, havent bypassed that yet but atleast I can just accept calls and check texts but let me know if you have a solution for the whole remote.exe thing

varyjam said:
and it does auto install its the part where it asks you to accept remote.exe and you have to tap yes or no for it to run on your device, havent bypassed that yet but atleast I can just accept calls and check texts but let me know if you have a solution for the whole remote.exe thing
Click to expand...
Click to collapse
Can you use the d-pad to do that?

Thanks you guys just come back from florida fitted the new digitizer everything works super and the digitizer i bought came with a new screen attached to it. best £7 spent lol

jeremy89632 said:
Can you use the d-pad to do that?
Click to expand...
Click to collapse
tried but d pad just initiates what ever is highlighted on the today screen

^^ A digitizer is a screen Its the touch screen part with htc logo at the bottom... right? (with a little ribbon comin out).. this IS the digitizer! (screen included).

Related

Touch screen no longer working

I have the 8125 and tonight i go to answer a phone call. When i got off the phone mysteriously the touch part of the screen no longer works. I tried a soft reset, a hard reset, removing the battery.... I cannot get the touch part of the screen to work. You can see whats on screen but there is no touch functionality. Anyone have any ideas?
remote screen aligment
i had the same problem the touchscreen stopped working suddently. im assuming that you can get pass the touch the screen to set up you device so what i did i downloaded a program called "remote screen aligment" that the only way you are going to be able to pass the first screen. hope this helps. google it to find the program its free.
S1ug said:
I have the 8125 and tonight i go to answer a phone call. When i got off the phone mysteriously the touch part of the screen no longer works. I tried a soft reset, a hard reset, removing the battery.... I cannot get the touch part of the screen to work. You can see whats on screen but there is no touch functionality. Anyone have any ideas?
Click to expand...
Click to collapse
Same problem here, just started browsing around since I was travelling last week without computer access. I am goign to call warranty services with CIngular tomorrow if they are open. If not first thing Tuesday!
working?
did you get it working again?. It happed to me yesterday, drives me nuts
Nah, called CIngular and got a warranty replacement no problem.
Re: remote screen aligment
kurtslash said:
i had the same problem the touchscreen stopped working suddently. im assuming that you can get pass the touch the screen to set up you device so what i did i downloaded a program called "remote screen aligment" that the only way you are going to be able to pass the first screen. hope this helps. google it to find the program its free.
Click to expand...
Click to collapse
Mine did this when I was CID-unlocking and had mismatching IPL/SPL versions. I found that by drawing a circle around the alignment cursor with the stylus I was able to get past this screen.
Not working touch screen / broken replacement ...
Center of my XDA miniS touchscreen stopped to work almost 3 weeks ago...
I sent my (lovely) PDA to O2 UK two weeks ago and today I received FAULTY replacement!
(very good known and common issue - "stylus is very loose and keeps falling out")
I've just sent another e-mail to O2's Customer Services and I'm waiting for reply...
I'm so angry and disappointed!
Regards
anyone find a solution
My touch screen gave out yesterday...I am getting very good at using my 8125 without the touch screen but a few programs require it. If anyone has found a solution please let be know because it would be a very happy man. Thanks for reading!

Touch Screen Dies after 5mins of use

Hi all.
Just got a JasJam about 2 weeks ago.
I am have a problem with the touch screen.
After about 5 mins of use the touch screen slowly gets more and more unresponsive untill it stops working.
If i remove the battery and let the phone sit for a couple of minutes then restart it the touch screen would start working again. But for only 5 mins.
Is this what everyone is refering to as problems with Screen Allignment or do i have a bigger problem.
Does anyone have any suggestions on how to fix this problem.
Thanks
Travis
Personally i would do i hard reset and not install any additional software to see if you have the same problem. If yes, then its hardware problem and needs to be sent in for repair. If not, then install your programs back one by one to find the culprit.
S.K.
EDIT: Ensure you back up your data before performing a hard reset. You will lose all information stored on the phone.
Silent_Killa's advice is what I would do. Might try uninstalling apps one by one first??
This is NOT the screen alignment issue - I don't think. It depends if the screen responsiveness going off is actually at the point at which you tap the screen is not matching where the screen responds?? In other words it does respond but not at the location you tap. If this is happening then it is the SA issue, but if the screen does not respond in any way to taps then I doubt it's the SA problem - though could well be a digitizer issue.
I have not searched, but a week or two weeks ago an identical problem was posted by someone else.
If a hard reset does not cure this I would suggest a return as soon as possible.
Mike
Hey guys.
Yea i trided the whole hard rest thing and it still did the same problem.
The screen works fine but it is just the tapping part that gets screwed up.
All my hardware buttons work ok so i can still use the phone. I just can't use the touch screen.
Do you really thing an application could do this sort of thing.
The main ones i use are -
SPB Diary
SPB Pocket Plus
Spb Weather
Pocket Informant
Are these know to cause any problems.
I will try one more time and not install any apps.
Oh well 2 weeks old and it's off for repair.
Thanks for your help.
Saber_007 said:
Hey guys.
Yea i trided the whole hard rest thing and it still did the same problem.
The screen works fine but it is just the tapping part that gets screwed up.
All my hardware buttons work ok so i can still use the phone. I just can't use the touch screen.
Do you really thing an application could do this sort of thing.
The main ones i use are -
SPB Diary
SPB Pocket Plus
Spb Weather
Pocket Informant
Are these know to cause any problems.
I will try one more time and not install any apps.
Oh well 2 weeks old and it's off for repair.
Thanks for your help.
Click to expand...
Click to collapse
BUT surely you tried it for an hour or two before installing anything!!?? And if working then only one application at a time?
No I don't think any of those apps. are the cause of the problem.
You still have not given full details about whether the screen is completely unresponsive or misaligned.
Either way if it's under warranty and hard reset does not cure it, get it returned cos this is not some little software fault.
Mike
Touch screen do not respond
mikechannon said:
I have not searched but a week or two weeks ago an identical problem was posted by someone else. If a hard reset does not cure this I would suggest a return as soon as possible.
Click to expand...
Click to collapse
Yes, it was me (I think), I had this problem too. It was only when the keyboard was slided and locked opened. Button would respond but screen would freeze and the start menu, sometimes, would pop up as an extra.
I had to give it back ...
dam said:
Yes, it was me (I think), I had this problem too. It was only when the keyboard was slided and locked opened. Button would respond but screen would freeze and the start menu, sometimes, would pop up as an extra.
I had to give it back ...
Click to expand...
Click to collapse
Hope you get it back working this time so you can start to enjoy it!!
Mike
dam said:
Yes, it was me (I think), I had this problem too. It was only when the keyboard was slided and locked opened. Button would respond but screen would freeze and the start menu, sometimes, would pop up as an extra.
I had to give it back ...
Click to expand...
Click to collapse
YEP that is exactly what mine does sometimes. After i open the keyboard the start button would start to pop open and close.
How did you get on. Did they tell you what the problem was.
Cheers.
mikechannon said:
BUT surely you tried it for an hour or two before installing anything!!?? And if working then only one application at a time?
No I don't think any of those apps. are the cause of the problem.
You still have not given full details about whether the screen is completely unresponsive or misaligned.
Either way if it's under warranty and hard reset does not cure it, get it returned cos this is not some little software fault.
Mike
Click to expand...
Click to collapse
Sorry, about that.
Full Details-
Screen has no problems with SA. After about 5 mins the screen slowly becomes more unresponsibe. IE i would have to tap the start button several times for it to work. When it finially pops open it just closes again almost straight away.
Not long after this the screen will become totally unresponsive, howver all hardware buttons will still work.
I am going to try a hard reset tonight.
I will let you konw.
Thanks again.
Well it is deffinitly my phone.
The screen wasn't working as per normal.
I hard reset my phone. When it rebooted and got to the "tap the screen to continue" bit. Guess what it didn't work.
I taped the screen several time but no go. The screen was dead.
I will have to send it back to the shop.
Cheers.
Travis
wiki update
I took the freedom to update the wiki on this issue :
http://wiki.xda-developers.com/index.php?pagename=Hermes_Problems
well, my device was a second hand but the seller was as so kind as to take it back... nothing for chirstmas this year .
still... happy new year to everybody !
Saber_007 said:
Well it is deffinitly my phone.
The screen wasn't working as per normal.
I hard reset my phone. When it rebooted and got to the "tap the screen to continue" bit. Guess what it didn't work.
I taped the screen several time but no go. The screen was dead.
I will have to send it back to the shop.
Cheers.
Travis
Click to expand...
Click to collapse
Fingers crossed you'll get a good one back. I think you were going to have to send this one back anyway.
Mike
JasJam screen responds to "ghost" taps!
The touch screen on my JasJam responds to continuous taps even when I don't tap it. When the keyboard is slid out, the start menu keeps on popping as if the start button on screen is being tapped. When keyboard is slid inside (device is closed), the device behaves as if the OK button (the "X" on top right) is being tapped continuously. Due to this, I can't open any program. (As soon as a program is opened, the "X" button on top right is automatically clicked and I reach Home screen again!
I uploaded a video about this mal-functioning of device:
http://www.youtube.com/watch?v=YWAyRLQ01oo
I have already:
1. Alligned screen
2. Hard reset device (Left and Right softkeys + Reset button)
3. Updated ROM and hard reset device
but of no use! Please help.
Read that
it's a hw issue, had to get a replacement ...
Same problem
I seem to be having the exact same problem. When I first got it, I was able to use the phone for a couple of weeks, then all of the sudden, the screen stoped responding, but all the buttons worked. I did a hard reset, and it worked for a little while, then when bad again. At first I thought it was related to ActiveSync because it would always go bad immediately after syncing. However, even when I don't sync after a hard reset it eventually goes bad again. Today I just got it back from manufacturer - they couldn't reproduce the problem. It worked all day. Then I synced. Stupid me. Its not responding again.
There's no way out. Get a replacement.
I'm hoping that my replaced device doesn't have same issue.
same problem
I have the same exact problem. I sent back the Phone to Cingular / HTC, and they "repaired" it under warranty. I got the phone bac, and after a day's use, it went back to its old state.
Since I got this on ebay (BIG mistake), even though it was new, its having this problem.
So far i am not at ALL impressed with the 8525. Seems to me like its laden with hardware issues.
Can someone please offer insight as to what I can do?
Sorry to hear that! I had actually purchased i-mate JasJAM from Dubai. i-mate has just one service center in USA (PocketPCTechs in CA). They provided amazingly great customer service and replaced the main board. So far the problem hasn't repeated.
shassouneh said:
I have the same exact problem. I sent back the Phone to Cingular / HTC, and they "repaired" it under warranty. I got the phone bac, and after a day's use, it went back to its old state.
Since I got this on ebay (BIG mistake), even though it was new, its having this problem.
So far i am not at ALL impressed with the 8525. Seems to me like its laden with hardware issues.
Can someone please offer insight as to what I can do?
Click to expand...
Click to collapse
Hey, I am having the same problem as well. Bought my phone on December 06 from eBay seller too. Big mistake as HTC will tell you sorry your warranty is void if you did not purchase the device from the carrier (even though it was new.) I am curious how you were able to get it repaired under warranty since you too bought yours from a third party.
I did the credit card trick and it worked flawlessly for about two months and just yesterday I am back to the same problem. After today doing the credit card trick numerous times I finally got the touch screen working now but who knows for how long this time.
BTW my serial number is in the HT642Fxxxxxx if anyone else that has this problem wants to compare and post theirs.
Facing the same problems...
... I've been thinking about repalcing the display and the touchscreen. But now, considering that it is a HW issue, I can only replace these two things. If the bug is in the module above the screen (statur leds and camera) or related to the wireing at the back of the screen, it won't get rid of the problem. On the other hand, if it is a problem with the screen getting too hot, then I'm on the right track...
Has anyone tried this yet?
I'll try to call HTC on monday, maybe they know where the bug is.

HD2 touch screen doesn't work

Hi guys,
This evening something wring happened with my HD2. Suddenly without any visible reasons touch screen stopped working. Actualy screen itself is working but it doesn't react on any touches. I did hard reset - no luck, screen is working but touch surface isn't, so basically my phone is almost dead :-(
Have you seen this behaviour ? Is there any possible way to fix it ? The only thing that comes in my mind which could cause something like this is static electricity shock, but if it kills HD2 screen I want my money back.
I guess now I should use warranty and this is just after 1 month of usage....
Just a stupd question
Don't be offended by my question, I just want to rule out the obvious.
You're not wearing gloves due to the cold outside?
Greetings
chuelibrueder
No, I'm not using gloves with HD2 :-(
I have the same problem. I believe that the connectors under the screen became loose.
I have send an email to htc and they told me to contact the retailer to check if they can replace the device and if not to contact the service center in Cyprus.
There is another thread about this issue here
i`m sure that warranty will solve it.. just contact your retailer.. good luck
Hmmm,
Yet another one having to go back due to hardware problems....
WB
I loose the touch screen today and the hardware button exept Home i think, i had to remove the battery and i waited 30s put it back and everything went in place, the phone had called one contact when i had the bug.
The only thing that happened before screen doesn't work and buttons : i received an MMS strange, i'm not sure i can rely on my phone
I only installed the 1.48 rom and the 3 patches (audio, sms and sd card)
20mihalko said:
i`m sure that warranty will solve it.. just contact your retailer.. good luck
Click to expand...
Click to collapse
I contacted the service center in Cyprus and they offered to repair it but they don't have spare parts right now. I've also send an email to the retailer and wait for their answer.
Seems i have to wait after Christmas for a repair or exchange.
The good thing is that by pressing the screen with my palm or giving it a few solid taps it works for some time.
bBeware keyboard layout!
I had suffer bye used hadwritting layout sometime it cause screen doesn't responds
try change keyboard layout not hadwritting
Just had the same thing happen with mine, powers up but the screen wont respond anywhere i press. I have tried hard reset AND soft reset, nothing!
Have just restored factory ROM, and deleted hspdl and dropped off at vodaphone in town. Im gutted!!
really seems to be a production problem: i had to send my hd2 back to htc for screen replacement just 4 weeks ago... same fault as yours: the touchscreen wasn't responding to input anymore!
the last weeks i noticed that many people had this problem too...
wow.. keeping a close eye on this.. guess the same problem from the HD is creeping up to the HD2..
Well im hoping vodaphone dont turn around and say its not covered under warranty etc, I had to [like most ppl] sign up for two years to get this phone, i aint gonna be to happy if i have to spend the next 21 months of my contract without the handset i wanted!
Yikes , yesterday my screen didn't respond either (for the first time). Soft reset didn't work. After taking the battery out and leave it out for > minute it still didn't respond. I pressed the screen a little and then it worked again. Not sure if it was because of pressing the screen, but it did look that way. I hope this will be the last time this happens!
tnx!
dio62000 said:
Yikes , yesterday my screen didn't respond either (for the first time). Soft reset didn't work. After taking the battery out and leave it out for > minute it still didn't respond. I pressed the screen a little and then it worked again. Not sure if it was because of pressing the screen, but it did look that way. I hope this will be the last time this happens!
Click to expand...
Click to collapse
YESSS!!! thanx mate this worked like a charm!!
VlaJko79 said:
YESSS!!! thanx mate this worked like a charm!!
Click to expand...
Click to collapse
Well, it's been a few weeks now and I've had this problem several times again and worse, even after a hard reset; and almost each time I could fix it by pressing the screen/hardware buttons, but that shouldn't be the way, because I don't think it's good for the hardware, so I searched the forum and I think I found the two culprits (maybe a combination of the two):
1. The problem occured exactly the same day I began using my 16 GB card, class 2. It once happened that when I had the locked screen problem I took out the card and it immediately unlocked. But every now and then the phone still froze, even when I took out the SD card if the problem occured.
2. Then I have put off the automatic light adjustment settings and guess what; no more freezes!
It looks like a combination of power settings and use of SD card. I'm not very technical, but even when it looked like it was a hardware fault at first, it now seems it's a software fault after all.
Touchscreen doesnt work
Well F4CK my screen will not respond to touch at all anymore seems that this is a problem that is not well addressed tmobile is sending out a new one but the question is when will the touchscreen stop working on that "new" one.NOT happy at all.
Well this has now happened to me....no touch response but hardware buttons working, screen still displays-- off to JB HIFI as soon as I can to replace.
OOOKK I had this problem when i just flashed my phone with a costum rom. As far i remember my phone fall down once or twice but not something bad. I have the silicone cover and screen protector. If it was a hardware problem i believe that it shouldn't work at all even if you had to use the hardbuttons. Which that was how i would have to use to unlock the screen. I will go back to the factory rom and settings to see if there is any difference. My current rom is AthineOS 3.14 and Radio 2.15.50.14.
If for any reason you want to access your cellphone and you don't have time go through troubleshooting. I Suggest you download mymobiler which connects the phone and you can use it through your pc. Make sure you take the sd card before you connect. Here is the website www.mymobiler.com
In my case, my phone was RIP. The touch screen stopped working after installing a custom ROM. I installed the latest official ROM from T-Mobile and my phone and came back to life

display turned white

hi all
my htc touch elf (P3450) display turned to white with black patch at one place & some lines all of a sudden. it was working all fine. i was charging when a call came. i disconnected recieved the call. after that the screen turned white
Tried restarting but no result.
I can hear the notification of a message coming. but no ringing tone when i tried calling from other number
Please bail me out.
regards
Hardreset could be the solution
not resolved
i cannot see anything on the screen except white screen with black patch.
i tried hard reset with imaginary screen but not resolved
i see no visible screen cracks
how to check if screen is crack?
It may be that the LCD is cracked, thats what it sounds like to me, anyways. Check the connector as well though to make sure it is all connected correctly.
The white with black patch does sound broken to me though (Sorry!)
Stu
Hi Stu, I just received my friend's ELF. His display turn white, but the device still be able to receive phone call. trying to enter bootloader, all I get is white screen with some black-horizontal-thin lines. Tried to hard reset, now it seems the device is on phone setup position so I can not get anything.
Is this LCD issue? Could it be broken? FYI, before this happen, there's already one dead pixel on the screen.
BTW...is it possible that upgrading to cooked ROM can bring LCD broken? may be, unsuitable ROM?
regards,
Bom81
Not sure if flashing a cooked rom would kill the screen - although I would say thats very unlikey.
It does sound like the sceen is broken, theres one way to find out - If you don't mind giving it a go - you could always try your screen quickly in his phone - I'd imagine you're fairly familiar with the internals by now
(I do have a spare screen laying around now - JTAG is no longer able to pick up my bricked elf at all - full battery etc how I was doing it no longer works - guess it is dead for sure now!)
captainstu72 said:
It does sound like the sceen is broken, theres one way to find out - If you don't mind giving it a go - you could always try your screen quickly in his phone - I'd imagine you're fairly familiar with the internals by now
(I do have a spare screen laying around now - JTAG is no longer able to pick up my bricked elf at all - full battery etc how I was doing it no longer works - guess it is dead for sure now!)
Click to expand...
Click to collapse
Hahaha..LOL, Today I did want to put my LCD on my friend's elf. but I forgot to bring the opening tools to my office. guess I'll do it tomorrow and see how it goes. I'll let you know after my experiment with this thing.
A little bit Of Topic on this thread, I think so, your device has problem
so even the JTAG method will not be able to connect to the processor. Too bad you're in england, otherwise, the spare screen could be very useful here. LOL
UPDATE
ok..confirm the LCD is broken. I've changed the LCD with mine, and the device is working fine. i guess the dead pixel is the cause of the problem.
Should be able to find one cheap enough on ebay - I do seem to find it cheaper to buy another faulty one (maybe even bricked) as long as the screen is working
Need help on my HTC Touch
Hi Guys,
I really need your help badly. I have an HTC Touch (Elfin), I presume (128/256MB). The problem is i have downloaded the official windows mobile 6.1 rom and extracted the .exe file using Winrar. After which, i copied all the files to the sd card and renamed the .nbh file to ELF0IMG as instructed in the forum.
I put back the sd card and pressed the camera button and the power button at the same time. When it booted up it says reading from SD card and I can see that it is extracting the roms and ext roms. Afterwhich, there was a progress bar and then soon after a while screen turned to blue and then white. Currently now, as I am tying this the screen is still white. Please advise me asap in what to do? Thank you very much.
kss1 said:
hi all
my htc touch elf (P3450) display turned to white with black patch at one place & some lines all of a sudden. it was working all fine. i was charging when a call came. i disconnected recieved the call. after that the screen turned white
Tried restarting but no result.
I can hear the notification of a message coming. but no ringing tone when i tried calling from other number
Please bail me out.
regards
Click to expand...
Click to collapse
Ur display screen has been broke as simple as that..
Ok. Here is the thing.
I've droped my phone down, straight on the screen, no problems. 5 minutes later, when my brother was trying to play on it the screen turned white, with no stripes.
After 1 month i even forgot i had an htc, found it in my office drawer, and i thought of reinstalling the rom. But before that i pushed very hard on the screen, i took the battery out, pushed it in the battery space and after i started it worked like a charm.

Digitizer gone - but not completely dead... Any advice? [VIDEO]

Hey my lovely XDA-ers, I'm really hoping for some magic here...
Yesterday my HD2 digitizer just stopped working... the Touchscreen will not respond to any inputs. It was bitterly cold outside so I was half hoping that an overnight stay in a warm room would help, but no avail...
The thing is, on one in every 5 restarts, I get a small amount of life from it. One one in 15 restarts, I get full use. So there's still life in there.
I could understand if it broke because I dropped the phone/squashed it, but at the time I was just playing Robo Defence, completely normal use, when all of a sudden it stopped responding.
I've uploaded a video, which shows how, occasionally, the bottom fifth of the screen works. However, as shown, when I'm using the top half of the screen, the digitizer appears to be receiving input from the bottom of the screen, as though I'm trying to perform a multi-touch action. For this reason I'm hoping there still be some way to rescue the phone without an expensive repair job. I bought it in March from XDA Marketplace, and it's served me faithfully since, but because of that I do not think I have the manufacturer's guarentee, or insurance
I've hard-reset, I've reflashed my ROM, I've tried in both WM and Android (my usual OS at the moment), I've reflashed over WM ROMs, and the problem stays the same... (also read all related threads!)
Sorry for inverted nature of vid!
So does anyone have any suggestions to try? Otherwise I might go through a £130 repair service on htcrepairs.co.uk - they do not show up on a forum search so I was wondering if anyone had used their service before?
Thanks all, appreciate any ideas.
Edd
Very odd indeed. I don't have a solution for your problem, but a suggestion. It is a long shot, but might help.
Whenever i had similar problems with my Wizard (i know, kind of old but one of the best older devices every made by HTC), i opened it and cleaned it from the inside and checked all the connections of keyboard, touchscreen, etc. to the mainboard. Sometimes it helped...
In the end, if you buy the replacement kit, you anyway have to open the HD2, so why not try this in prior to buying the kit...
A lot of people seem to have this problem. There's a lot of information on it here. Do a search. But the short answer is its a hardware problem. If your phone is still under warranty send it back. I think HTC will fix it for free if It's less than a year old. But try your carrier first.
Sent from my HTC HD2 using XDA App
BAD NEWS...
i had EXACTLY this happen to me. eventually it totally stopped responding. Only option is to replace the digitizer.
GOOD NEWS..
After a month of searching, I found a really good guy to do it. www.iexpertstudio.com . The owner is VINCE. you can email him on his site. He charged $110 including mailing it back to me. He replaced the LCD and digitizer and sent it back. All works perfectly now.
I see you are in the UK so dont know if it makes sense to send it to the US. Alternative is to go on ebay and buy the screen/digitizer and replace it yourself.
(BTW normally i would have chucked the device, but even after 1 year I still dont think there is as versatile a device as the HD2. Had the DHD been 3G useable in the US I would have bought one.)
Thanks for the feedback guys, I've been doing some investigation my end (and you're right, there are similar threads on here, but none which had a "half-screen working" problem.)
I've narrowed the culprit down to my "Back" button. It's somehow exerting pressure on the screen, leading to either a non-responsive digitizer or an input at the bottom of the screen.
I might add this to an entry in the "ANDROID KILLS YOUR BUTTONS" thread
My choice is to live manually with it, or get the company mentioned in the first post to give it a good clean, but whether it's worth £80 just yet is a question for me.
Anyway, thanks for your input, guess this thread will close, but to any readers in future, if your screen seems to die, see if it's pressure on the screen caused by the buttons!
I can totally support your reasoning.
I haven't had any problems whatsoever with the touchscreen in almost a year of honoured career of this phone, while this morning I was trying to unlock it with no success (nothing special happened, I even used it 10 minutes this morning already). At first I thought it was the usual "sleepy" behaviour of the screen right after waking up, butafter sliding down the hdmini style unlocker at least 10 times with no effect I really started freaking out :O
I have longpress endkey set on instant reboot, and after that it seemed working... just not for too long.
To cut to the chase, what in my opinion supports your idea of hardware buttons interfering is:
sometimes, as I have LMT installed, with the tap&hold option enabled, swiping with just one finger triggered double swype instead (as if the screen detected a second, firm press on the screen elsewhere even if I sure as heck was swyping with one finger)
using mymobiler didn't work as well; if it was a hardware touchscreen problem, mymobiler should work, as it simulates touches, so it will just do its job even if the touchscreen is totally dead... while, IF the hardware touchscreen detected a firm press somewhere, mymobiler wasn't able to actively simulate another press
repeatedly pressing on the end key (which seems to be the culprit in my case) apparently solves the problem, as I can use the touchscreen again; also, a prolonged cycle of hibernating with end key, waking with end key, swyping down the hdmini lock (repeat at libitum) seemed to work, as if I dislodged something by activating the button so often
What I don't understand anyway is: HOW can a button pressing on the digitizer be exerting a touch action? If this was a resistive screen, I'd understand, but it's capacitive, and not even capacitive pens are so good as fingers in activating the touch. The buttons are just plastic with a metal contact underneath, and this metal contact shoudl by no means be anywhere near the digitizer.
Bah.
I know I have 2 years warranty on this device, but being far from my phone during the warranty processing gives me the creeps, so I'll just go on using it and pray this to be the defaillance of one sunday morning not to be seen again... after several soft resets (and fantasizing about a new rom flash, which I need anyway for other reasons) the problem seems to have settled by delicately bashing on the end key. The unlock slider is responsive after every wake up now... FOR now.
Praying...
My screen also died. So the only thing I have to do is press on the end key for a couple of times to make it work again?
lol, that's ONE possibility.
Just saying, in my case it worked, and still does since it happened once more this evening, so it's definitely got something to do with the hardware keys messing around (and hopefully dislodging themself for good, or I'll have to send it back for servicing), anyway in your case it could also be a dead digitizer, so no go
let's put all this about touch screen in 1 sticky thread pls.
I've been living for the problem for about three weeks now. It's never got worse, but never got better. It's a livable situation so for the moment I'll deal with it. I might check with HT about warranty, but it's not yet bothersom enough to make me want to flash back to stock, send it off etc. etc.
smeddy said:
I've been living for the problem for about three weeks now. It's never got worse, but never got better. It's a livable situation so for the moment I'll deal with it. I might check with HT about warranty, but it's not yet bothersom enough to make me want to flash back to stock, send it off etc. etc.
Click to expand...
Click to collapse
ditto.
Actually, I don't like having paid good money for a defective phone, but being without HD2 for up to a couple of weeks to one month (maybe? have no idea how fast HTC servicing is) is troublesome. I may buy for a deal a blue angel as a spare, yet, no GPS...
The most problematic event is if you get the "stuck" screen during a call.
In my case, it's the end key that messes it up; if the screen's dead, pressing twice the end key, firmly enough (once for screen off, then again for screen back on) wakes up the screen, and apparently, during a ringing incoming call, you can press the hardware end key without rejecting it, so it's a viable option (not taking into consideration the fact that trying to wake up the screen takes time, and the caller may give up after a while if you're not fast enough).
But if for any reason the screen gets stuck while the call is connected, I am stuck too, as to wake it up I should press the end key thus hanging on the other party.
Sad story.
EDIT: forget what I wrote, pressing end key while phone is ringing WILL reject the call. I tried it before during a real incoming call and apparently it didn't do it, but now it just did.
I also have a HD with a dead screen....
Only thing here is I have sent it back twice already to TelSuck here in Australia only to have it returned after the tech has wiped it over and reflashed it for me... What helpful little imps they are!
Code:
http://www.youtube.com/v/T6ssqmpRIB0
Its drivin me nuts sending it away for 3 weeks at a time to have someone with just enough grey matter to be able to wield a screwdriver tell me nothing is wrong.
Happy to try any suggestions!
@insinr8
this thread is just for half-dead screens where the screen sometimes actually works. Unless you can resurrect it by firmly pressing on the hardware keys, but if it's dead on a regular basis, then it's not our same problem I'm afraid :-(
@OP
while having an "attack", did you try plugging out the microsd to see if it magically solved the problem?
I mean, if it did, it would still be a hardware problem related to the microsd slot, since there is no point for a faulty microsd to mess up the touchscreen, and let it work from time to time
ephestione said:
@insinr8
this thread is just for half-dead screens where the screen sometimes actually works. Unless you can resurrect it by firmly pressing on the hardware keys, but if it's dead on a regular basis, then it's not our same problem I'm afraid :-(
@OP
while having an "attack", did you try plugging out the microsd to see if it magically solved the problem?
I mean, if it did, it would still be a hardware problem related to the microsd slot, since there is no point for a faulty microsd to mess up the touchscreen, and let it work from time to time
Click to expand...
Click to collapse
I will try that - it seems to happen more frequently when plugged in and charging, and now more buttons seem to be the cause/fix (e.g. now the home-button, or when I am on home-screens the phone will swipe "left", whereas before it would swipe "right". I'll keep playing.
I may check out HTC as I reckon my warranty, if I have one, will run out soon... Will still wait til after Xmas as I need my toy for the boring bits of Xmas!
I'm having same trouble now whit my phone except problems started mouth ago. After some period I again power up my phone and suddenly everything worked perfectly. Unfortunately this last only for two days and then exactly same problems happened, partially function screen.
As far as I know only good solution is replacing digitizer... I already ordered one for me.
exactly the same problem for me.. I sent it back with warranty yesterday
smeddy said:
I may check out HTC as I reckon my warranty, if I have one, will run out soon... Will still wait til after Xmas as I need my toy for the boring bits of Xmas!
Click to expand...
Click to collapse
Ditto.
Actually, my warranty lasts two years, which means until 2012, anyway I cannot stand risking to lose calls because the screen dies on me in the wrong moment, and the only way to wake it up is pressing the endkey (which by the way is the only "cure", and apparently never the cause).
I will be uploading a video on youtube regarding this, also to show it to the guys at the HTC support who will be asking me to hard reset and reflash until annoyed to death (as if that will solve anything)
Bump
This is the video that I just uploaded to youtube:
http://www.youtube.com/watch?v=C3-PNYwpYeI
EDIT: One day after, the problem has become way more frequent, 1 out of three times I wake up the phone, diugitizer is dead and I need the " on the end key to make it work
Uploaded another video on youtube with problem showing on vanilla lockscreen so HTC support doesn't try and tell me it's CHT lockscreen's fault
Last bump.
Screen has ben promoted from "hardware key problem" to "permanent death".
Now I can use the phone with mymobiler, but I can't anymore with touch, I seem to not be able even to wake it up even by pressing on end key
Re-flashing last official rom upgrade now to see if anything changes... yeah,sure
Ouch - good luck, hope mine doesn't go that way...

Categories

Resources