my on-screen keyboard's format has changed. for example, the "shift" missing and additional 1 row of number in the first row.
how to change back to default keyboard?
many thanks for the help.
probably your setting is on large keyboard.
try changing the this on option in the input method.
Hi all!
I bought the Touch Dual last week and since then have been doing tens of installs/uninstalls to check what apps are out there etc (AE Button Plus was one of them).
I remember when i got it I could enter both TEXT and numbers from the sliding out number pad. I used the *XT9 button to differentiate between ABC, abc, XT9 - text input methods.
Now pressing the *XT9 buttons doesnt do anything anywhere - all i can enter with my kaypad are corresponding numbers.
I must have removed/unchecked something in the settings, but what?
Thanks in advance!
callix
callix2 said:
Hi all!
I bought the Touch Dual last week and since then have been doing tens of installs/uninstalls to check what apps are out there etc (AE Button Plus was one of them).
I remember when i got it I could enter both TEXT and numbers from the sliding out number pad. I used the *XT9 button to differentiate between ABC, abc, XT9 - text input methods.
Now pressing the *XT9 buttons doesnt do anything anywhere - all i can enter with my kaypad are corresponding numbers.
I must have removed/unchecked something in the settings, but what?
Thanks in advance!
callix
Click to expand...
Click to collapse
Yes!! I too had that problem... It seems that after installing about 5 apps, this will happen. I hard-resetted about 5 times now and i still dont know what exactly causes this trouble
I have the same problem too.. I've posted it under this link
http://forum.xda-developers.com/showthread.php?t=384160
Does anyone know how to solve it?
Solved
Fixed it. The alphabetical input from the hardware 16-keyboard is back in SMS/Word Mobile/Texting programs!!
Just go to Start > Programs > PDA Settings > ROM Settings > Enable T9.
This makes the hardware *xT9 button allow to switch between ABC, abc, #12, T9.
PS: Im using this ROM (http://forum.xda-developers.com/showthread.php?t=364335). The problem occured after I was using the above ROM for a while, and it was fixed without reflashing anything.
Hope this helps!
Callix
is there like a registry fix for this problem instead of flashing an entire rom?
@sebastlim
there's no need to reflash anything. with my Niki Project 6.1 ROM, when the problem started, i just went to Just go to Start > Programs > PDA Settings > ROM Settings > Enable T9.
Callix
callix2 said:
@sebastlim
there's no need to reflash anything. with my Niki Project 6.1 ROM, when the problem started, i just went to Just go to Start > Programs > PDA Settings > ROM Settings > Enable T9.
Callix
Click to expand...
Click to collapse
Yes, but that options is only available on that rom, others dont have it
And even doing that doesnt change anything on my niki rom.
Until I turned it off and back on again. D'oh!
Problem with physical slide out keyboard and soft input panel keyboards
I have a 20 key version touch dual and had this problem as well - and unlike the other posts, I had not installed any additional apps. The WM 6.1 version CE OS 5.2.19716.1.1.0.
Here is what is happenening:
1. The slide out physical keyboard will type only the numbers when the numeric keys are pressed. The alphabet keys on the sides q/w, a/s, z/x, o/p, ,/l etc only input the first letter and dont cycle on to the second letter [eg only q comes up - you cannot bring on w] and the xt9 stops functioning. Pressing the alt or sym/*/xt9 key does nothing other than typing up *.
2. The two soft input panel keyboards (touch keyboard 20 and touch keypad 12) revert to a qwerty keyboard and dont switch to a xt9 mode.
3. I tried using the Start-->Programs-->PDA Settings-->>check T9 option. It works but erratically. Often, it reverts back when the PDA is turned off and on [not soft reset]. When I go back to PDA settings and look, the T9 option is checked and yet the behaviour was non T9. I checked off and checked on T9 -->> works again. Sliding out the physical keypad seems to preserve the xt9 most of the time. Erratic..
I will try to install the fix from HTC
the difinite solution
Check whether PCM keyboard is installed and if yes, uninstall it. The problem will be solved!
If you install the appropriate version of EzInput (found here: http://forum.xda-developers.com/showthread.php?t=426281 ) it should re-enable your hardware keys.
Good luck!
When you are creating a message or a note, and you use the touch keypad as the input (whether using the touch screen or hardware keypad while TOUCH KEYPAD is selected as the input type) the letters are highlighted when you create a message, but if you text fast, and press space, your previously inputted word will dissapear. Is there anyway to stop it from doing this?
Trying selecting the keyboad layout entry and use the hardware keypad, this does not appear.
Any help on this?
is ist possible to customize the touch input?
what i mean if you press and hold a character an additional bar is displayed where you can select special characters from.
i want to remove some of these special characters and change the order.
is it possible?
Does anyone have any ideas?
Hello, everyone!!
There is a key for "/" on the English keyboard of my TD2, but I don't see any key for "\". How can I type it?
with full qwerty keyboard tap 12# and then tap 1/2
Thank you!! I found it!!