Database Users

HTC Touch Cube, Flo, OS . . . ?

Hello,
I have seen videos on You Tube with Touch Flo interface running on HTC 8125 WM5. When I ask where do you find this interface they all refer to xda developers for the interface. I'm newbie and looked in the search area for a true Touch Flo interface. I have an HTC 8525 WM6 PRO 3.0 BLACK and running a Touch cube interface. This is nice but not like the actual Touch Flo that I see on HTC 8125. First do I have to downgradr back to WM5 in order to run interface. Secondly is there a thread/link to where this interface/OS is located. Sorry if I may have overlooked the answer in my search. Thank you in advance.

this has been talked about MANY times the hermes will never support the real touch flow sorry to say!

austinsnyc said:
this has been talked about MANY times the hermes will never support the real touch flow sorry to say!
Click to expand...
Click to collapse
This is not such a bad thing... its definitely not worth buying a Touch over. I'm testing one of the beta units now for CDMA and not having the keyboard kills me.

man points for first cube.

As said above.
I dont get why we were not given a cube, when it seems everone else has
Awell, anyone know if any other already made one's will work ?
My neighbour whos got one has managed to get a few apps installed already, ill try to post them later on.

Hi
it seems we were not given a cube primeraly because we have a bottom-end machine.
we have the same chipset as for instance the touch, yet we have no wifi and 3g (we do have GPS whichs kicks ass!) not that 3g and wifi is neccesary, i think 3g and wifi have been disabled in our device.
pls read this thread, and if you can help with the files that would be great!
http://forum.xda-developers.com/showthread.php?t=395475

pharos device running chip omap.I think possible port touch flo cube for pharos

Touch Cube woks on Pharos
I installed Touch Cube (ported from Polaris) into Pharos the other days. Work fine for me...only a bit slower than 'Elfin, Dual, Polaris' while operating. Need some more registry adjustment, I guess.

Screen is not flat
It works on Pharos, I have tried and finally removed.
BTW, I don't think running Cube in Pharos is good because the LCD screen is not flat like Elf/Elfin, Dual or Cruise.

suracha said:
It works on Pharos, I have tried and finally removed.
Click to expand...
Click to collapse
Which version did you try? and how did you get it to work?
BTW, I don't think running Cube in Pharos is good because the LCD screen is not flat like Elf/Elfin, Dual or Cruise.
Click to expand...
Click to collapse
It might not be, but it wasnt a good idea for the touch cruise either because they dont have the grapics driver ive heard complaints that its very slow on the polaris
I still want it .. because then i can choose whether to keep it or not... its mostly eye candy anyway. I find the htc home plugin works great too

Shame I didnt get a reply from suracha, bita would you like to share what you did to get the cube installed and working?
Here is where i am.
I have installed touch stettings v1.22 by Carlos(fatattitude.com)
I installed the Kokotas cabs quickdial and Biotouch.
Also I've put files in the windows dir: MediaHubMini.exe, APLauncher.exe,LaunchStartupApp.lst and startupbiotouch.exe
A guy that has the polaris has sent me his reg settings.. so now Im looking through those!
And it seems i miss some in the hklm\biotouch so Im gonna look some more and then change my settings maybe that will help!

[APP]HTC G-Sensor Calibrator [calibration not saved on some devices]

Here is HTC G-Sensor Calibrator extracted from HTC Raphael, works as well on Diamond.
[EDIT] G-Sensor can't be calibred on Diamond since original driver doesn't consider calibration data... We need to port Raphael driver.
Diamond users, I am preparing a big surprise for you...
Enjoy!

Wow, that's awesome !
Thank You

Doesn't seem to work for me. Installed it and ran the calibration.
However, it seemed that it didn't save the calibration for me?
Using bElite 0.95.

It doen't work for me, orginal duch rom.
Its say calibration completed but the bubbels are still not in the middle.

Unfortunately for me too. On Italian Original ROM 1.37 it returns 'Calibration Completed' but after that the left-right bubble turn back un-aligned.
...
What kind a big surprise Schaps, i'm getting so curious!!!

I had the impression it was working the first time I tried... Am I wrong?
Ok I will investigate to get it fully working, I think it should be possible.

I get the same thing. The Horizontal bubble is spot on but the vertical is a tiny bit out.
When you correct it, it says its calibrated then the Vertical bubble goes back to where it was?
Strange.
Nice find tho.
Im using a standard Stock HTC Rom 1.37.405.1 WWE. Not a cooked Rom.

GalliKO said:
What kind a big surprise Schaps, i'm getting so curious!!!
Click to expand...
Click to collapse
You will know more this week-end...

schaps said:
You will know more this week-end...
Click to expand...
Click to collapse
Great, i love suprises! Thanks schaps for all your hardwork and discoveries. I speak for all the Diamond users on here im sure!

guys..how can we really make sure the phone is flat? i tried with my diamond cover off, but if u touch the edge of the phone, you still can feel actually its not firmly flatten right?
BTW..i tried out the calibration tool as well...after re-enter the calibration tool with 1st calibration done, the reading is out again

For me, it does calibrate my G-Sensor, but if i soft reset the device, it come back to the same setting

Schaps, it works flawless in my ATHENA using the X7510/Diamond ROM

Very impressive
Dear,
I try it on my HTC original 1.37.406.1 French the soft is beautiful but can't calibrabe. Hope it did in a few time because it seems to be usefull.
Thank you.

Sorry but no calibation on my german o2 XDA Diamond with the orginal Rom! But i´m sure you guys will solve the problem!

sergiopi said:
Schaps, it works flawless in my ATHENA using the X7510/Diamond ROM
Click to expand...
Click to collapse
The Athena has a LIS302DL G-sensor whereas the Diamond (and Raphael?) has a Kionix KXSD9.
This utility runs on my Diamond, but does not calibrate the sensor. Maybe this utility is only intended for a specific chip?

Will try it! Thanks

Hi schaps, since you are looking at the g sensor and the Raphael, is there any chance do you think of it being possible to get VueFlo working on the Diamond, or would it even be worth having? Looking forward to your surprise, I hope it's a rom! Thanks for your hard work.

Ok,
the software works for sure because it changes some registry keys under :
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\GSensor
It changes the "calibrateX-Y" keys that were all set at 0 before. I've spot it writes a very strange value for key Calibrate3-2, and I guess that's why the Gsensor driver does set them back to default values. I am trying to understand how it works right now.
EDIT: Noway!! The data in regsitry are always set to default on reset, the strange value could be a negative number in an unsigned rappresentation. The good news is that the calibration work 'til reset.
P.S.: Some of the masters could please be so gentle to advice me on what disassembler to use for ppc software ? I searched this forum but I got confused. Thanks a lot.

Calibration works but Diamond driver doesn't consider calibration data, so there is no way to calibrate Diamond G-sensor using original driver. We need Raphael driver since it will use calibration data stored in registry. I have tried to port this driver to Diamond since it has exactly the same accelerometer hardware, but it doesn't work... It may be because Diamond doesn't have keyboard (G-Sensor should be automatically stopped on Touch Pro when keyboard is out or when device is in low power mode).

uniqueboy said:
Hi schaps, since you are looking at the g sensor and the Raphael, is there any chance do you think of it being possible to get VueFlo working on the Diamond, or would it even be worth having? Looking forward to your surprise, I hope it's a rom! Thanks for your hard work.
Click to expand...
Click to collapse
VueFLO is part of my surprise
It works on few apps at the moment but I plan to support most of apps in the future (including IE and Opera of course).

Manila 3d on Touch?

Hi folks,
i saw some threads in the development section for manila 2d (which really looks cool). I'm wondering if this works on my HTC Touch!? I'm also not sure if there is a cab install version available - or is a rom flash needed (don't want to do that again...)
has anybody already some experiance with manila 2d?
thanks for any information!

you'll notice that there's a thread a few posts down with the Title "touchFLO 2D on ELF" this is the same thing as Manila 2D. It's a simple cab install and works just fine.

Just try it you will love it.

Looks good, but it doesn't work as it should. On my Elfin Audio Mgr 2 doesn't start, system runs veeery slowly even after uninstalling TF2D (hard reset helps) and cable is causing system freeze :/

just tried it and it really looks cool! It works without any problems...
Sad thing is, that its not working together with any other today plugins...

Install SecondToday:
http://www.chi-tai.info/cs_wm_tools_im_cs.htm

nuke1 said:
Install SecondToday:
http://www.chi-tai.info/cs_wm_tools_im_cs.htm
Click to expand...
Click to collapse
yeah thats really cool! I have mapped the app to my camera button and so i can switch very fast - perfekt

Touchflow 3D
I also have some problems with this panel, after I installed it to my Xperia I have serious problems, it's look great but it's very slow and after open a few other panels my phone just block, I've to reset the Xperia and then I can go on, so I deside to uninstall it but now way it stay's, and after looking in my installed programms it is gone??? I can't uninstall it and I suppose that the only sollution could be a factory restore. I'ts a pitty it don't work like it should be cause I find it a great interface so if anyone could give us some advise they're welcome. I did install the second little program tf3d_panel but even that bring it to full speed and error free

manila on htc touch hd
As the title says, i run on my htc touch hd. where can i find a tutorial on how to install manila on this kind of phone step-by-step ? (tutorial for noobs as you may say) I am totally away from this phone technology and i've found a lot of posts but for htc touch and not touch hd. i want to know which files i must install, where i find them and how can i change the theme. Please, help a noob

Atharia said:
As the title says, i run on my htc touch hd. where can i find a tutorial on how to install manila on this kind of phone step-by-step ? (tutorial for noobs as you may say) I am totally away from this phone technology and i've found a lot of posts but for htc touch and not touch hd. i want to know which files i must install, where i find them and how can i change the theme. Please, help a noob
Click to expand...
Click to collapse
Atharia,
Just as nobody has replied and I don't want you to be left in the dark
Have you checked anything in the blackstone forum? That would be a more appropriate place for you to be searching. I understand you may have search for HTC Touch, and that would probabaly be why you came here.
On the other hand though, I think you're phone may actually come with what had been ported to this phone - don't quote me on that but I am sure that it had touchflo as standard?
Stu

HTC Touch2 (Mega) - does it have gsensor?

Hi.
I try to determine are my HTC Touch2 have GSensor.
I run some app using g sensor and it seams that part of them not work and part of them run but do not react on phone move.
I'm afraid that this phone don't have this sensor

definetly no, it dosn't have g sensor

I've got the AT&T Touch2 and mine's showing it has a G-Sensor. Oh snap!

Looking at specs on HTC site, shows a g sensor
Additional Features
- Motion G-Sensor
- Ambient Light Sensor
- FM Radio
http://www.htc.com/us/product/attpure/specification.html

Wrong specifications, diffrent phone.
This is the Touch 2, and except for the AT&T version that might have a G-sensor, the other verions do not have a G-sensor.

Hey! It is NOT same device. Lot of the differents between Touch2 and AT&T Pure. Like Camera resolution, sensors, etc.

yep, Touch2 doesn't have gsensor

G-sensor is hidden in the bottom of 3.5 phone socket...
HTC didn't equip it to all models, therefore it lacks in most of specifications.
To verify how it works go here:
HKLM\Software\HTC\HTCsensor\Gsensor
Change default value and try it

Andrew_KYIV said:
HKLM\Software\HTC\HTCsensor\Gsensor
Change default value and try it
Click to expand...
Click to collapse
What key to insert and which value to change? Be a little more precise, please...

g sensor
how can i go there ??

I dont even have the setting

What key and value shall be used here??? Mine shows blank...

I'm confused. So HTC Touch 2 (not the AT&T ver.) does or doesn't have the G-Sensor?
I'm about to buy it, so it'd be nice to know.

Default , T3333 / MEGA / Touch2 DOES NOT HAVE G-SENSOR !

Please use SEARCH
it is more simple to search for an issue then to ask it all over again, so please try to search first !!!!

raulg said:
it is more simple to search for an issue then to ask it all over again, so please try to search first !!!!
Click to expand...
Click to collapse
Cant agree more, there is a description all over the internet, NO G-SENSOR
Thread Closed

In fact it was joke prepared to 1APR
HTC Mega was assuming to have G-sensor but HTC decided to spare on Touches.
Mega has no G sensor. Quoted registry entry is supposed to be present at any WM phone.