HI all,
While receiving a call, the Canvas always comes with the curtain which could slide down to have all options, can change registry to disable this? Quite troublesome for this function...
Any News on this issue?
I'm also intressted in this
that comes as an improvement from TD1 as users complained that when speaking, they'd navigate with the ear. Bear this in mind when you disable it
I'm looking for this too... But didn't find anything :-( not in the registry...
I'm also interested in this... been searching far and wide for a solution.
I have the problem the other way round. It's gone on my phone and I want it back
But I guess if somebody finds a way to disable it, it will also solve my case.
Any solution on this?
Dialer Curtain
Install Rhodium Dialer and you will get rid of the curtain.
do a search on Rhodium dialer and you'll find it.
Related
I am using the Jaguar 3.1 WM6 custom rom. I think there is a hack that re-enables T9 predicitve text, because every time I go and disable it in Settings/Input, it somehow re-enables itself.
I really, really HATE predictive text. It pisses me off. It is annoying. PLEASE, I have read the wiki's, searched the forums, googled...I am pretty sure there is a reg entry to permanantly disable this bane of my texting existence. I just cannot find it.
If anyone knows of a hack to disable or even delete T9 texting, please, I would appreciate knowing what it is. As always, thanks in advance for your time and input.
A little action makes for a happy woman
Cue the stripper music...
gyrate, wiggle, bounce, and...
BUMP
anyone find a cure to my T9 woes yet??? If there is a fix anywhere, I'd love to know about it. Again...thanks.
--->BUMP<---
Folks, still looking for a registry hack to PERMANENTLY DISABLE predictive text (T9 sucks). I want to go beyond Settings/input/etc...I want the damned thing off for good, never to return!!
Can anyone point me in the right direction?
Please?
I have seen threads in other device sections, but none for the Wiz. Also there is a cab in the "Black Diamond" thread that says it disables T9, but it would not work...it is perhaps sensitive to that rom. After 2 months, I still have not found where to look for T9 in the reg settings and purge this f**king thing for good...or at least disable it.
No replies? Maybe you're not asking the right people...
Can't even FIND T9 as a feature/option on my Wizard. Are you sure you're even in the right thread, here? Seems like you should post this to the Wizard WM6 thread, not the standard Wiz thread...
Myrddin Wyllt said:
Can't even FIND T9 as a feature/option on my Wizard. Are you sure you're even in the right thread, here? Seems like you should post this to the Wizard WM6 thread, not the standard Wiz thread...
Click to expand...
Click to collapse
T9 is an option via settings/input. I had it on WM5 and it is still on WM6...I don't know if it is called specifically T9...but it is listed as word completion. I do not want to make a duplicate thread, so I won't re-post in WM6. I would like to permanently disable the WORD COMPLETION feature. It will often re-engage after a reboot, then I have to go in and untick everything. I don't want to even have to worry about that...I want it dead. Reboot or not, I want it to be set as keyboard WITHOUT any word completion settings...ever. I thought perhaps in the registry under HKCU/ControlPanel/Sip...but from there, I am unsure which action would kill the T9 feature.
If anyone has any ideas to help me out, I'd really appreciate the direction to go, so that I can disable word completion...for good.
Thanks.
Ok...so going into my reg entries...I modified the sip to be "0" from previously being "4". I powered off, not soft reset...but on power up, it restored to "4" again. When I go into Settings/input/word suggest and untick, it changes from "4" to "0". So what I am wondering is this...
Is there perhaps a different number modification I need to enter to permanently disable this, or can I just flat out delete this sip entry?? And if I delete it, will it just come back on the next reboot, or conversely, would deletion harm my device?
HKCU/ControlPanel/Sip/SuggWords = 0x0 (0) (when unticked...also via physical modding of registry) I would like this HKCU/ControlPanel/Sip/SuggWords = 0x0 (0) entry to remain permanent despite resets.
Help...please. I'm getting frustrated.
Hi... I have a similar problem.
I want to disable the predictive text functionality but I can't seem to find a way to do it. Even when I disable on the settings it still keeps prompting the words, this is really annoying when typing on IM.
Any clue to fixing this??
Were you able to find a solution for your case?
txs
I did a hard reset yesterday and now i can't see the bluetooth notification icon in the menubar, so now i can't see if my bluetooth is on or off. Does anyone have a solution for this?
You sbould be able to go into start-->settings-->connections-->comm manager and take a look. It'll show you if bluetooth is on or off.
Yes I now. But before the reset i had the icon in the titlebar. In that way i could easily see in my homescreen if my bluetooth was on or off. It was also very handy because i used to set btIO-mini (which is a bluetooth toggle) to a hardware key for easy and quick switching.
problem solved. I removed my dialer skin (mrincredible 3d) and the icon came back.
Just for your information: I tried another skin (Poorlyducks) for my dialer and had the same problem. The bluetooth notificationicon would'n apear. I removed the dialerskin and it came back. Will try some other skins in the near future but it seems that skins installed on my Jade make the bluetoothicon disapear, so be aware if you try some skins!
If you manage to find a nice skin (just for the dialer!) which doesn't make the bticon disapear let me know please.
There's plenty of dialers on here that you can isntall. Just do a search and you'll find them. Not sure about the disappearing icons though....never encountered that kinda problem. I'm using the SPB black47 dialer skin on my Touch. Looks great.
I posted a question in another thread and got no answers, so here it is in its own:
i've got a stock usTmo tp2. If I disable skin of phone dialer (HKEY_LOCAL_MACHINE / Security / Phone / Skin change the value of 'Enabled' from 1 to 0) creates problems dialing out through contacts/callHistory. Selecting the phone number in contacs/callHistory will not dial out, as if it lost the link to the dialer. searched here for TP2 tf3d dial call proglems, got nothing, even though I suspect is is something simple that I overlooked. I know a flash junkie's answer to any question is to do a hard reset, but I see this question might have a simple solution that I can't figure out.
I like the oem htc dialer, not the Tmo one, and disabling the skin in my tp1 has no problems at all. Tmo tp2 tf3d is version2.1.38165.1 Is there a way to disable the dialer skin and still be able to use contacts?
bump
... bump ...
Any solution to this problem?
I like the clean oem WM dialer (HKLM/Security/Phone/Skin change the value of 'Enabled' from 1 to 0) , but it creates problems dialing out through contacts/callHistory. Disabling TF3D brings back the ability to dial out from CallHistory/Contacts, which is what I want, but the OEM WM dialer by itself still lacks the autosearch function.
again, SEARCH did not find any useful results. is everyone with usTMO TP2 using the stock TMO dialer?
i am havin the same problems.
Hi there ... for a while now I`m using Duttys ROMs, but I have a problem with the sensor that turns off the screen during call ... sometimes it doesn`t work properly and I keep pressing screen buttons with my cheek. I remember having an incall slide curtain on 1.43 original ROM that helped for this bug, but it`s never included in any latest ROM ....
So I`m asking for the folowing : is there a way to install just the curtain cover, or change the registry somehow in order to bring back the curtain, or it must be implemented in the ROM itself ?
Here`s a screenshot of what I mean ....
P.S. Thanks to anybody that can help me !!!
i have the same problem and it's driving me nuts . also, the "tap with two fingers to shut off the screen" trick does not work with my device. windows button --> lock helps but is not reliable. maybe someone can make a custom made lock screen?
i'm looking for that too... it would be easier to have the proximity sensor issue fixed thand that (battery wise)...
Anybody
making the curtain show or not is an option that you can set, and heck knows if I can remember where!
I actually want to have all those buttons always accessible (that is, I disabled the curtain) because I've never had problems with proximity on my ear and accessing all the options immediately is easier, but I uderstand it's not the same with everyone.
i can't find it in settings
It depends on the Rom you`re using ... when there is a ROM with curtain Enabled by default , there are programs like BSB Tweaks that can remove the curtain ... but where the curtain is not presented at all, there is no way to enable it .... that`s what I`m asking ... isnt there a way to just flash the phone canvas, or a .cab or something to bring back the curtain on cooked ROMs ?
c0rp1 said:
It depends on the Rom you`re using ... when there is a ROM with curtain Enabled by default , there are programs like BSB Tweaks that can remove the curtain ... but where the curtain is not presented at all, there is no way to enable it .... that`s what I`m asking ... isnt there a way to just flash the phone canvas, or a .cab or something to bring back the curtain on cooked ROMs ?
Click to expand...
Click to collapse
ouch right... that was the one, I used bsbtweaks to disable the curtain Sorry I couldn't be of any help
the s2u2 lockscreen has got the ability to lock ure phone when the connection is established.
but what about the secconds it takes until it connects?
how reinstalling incall cover slide ?
I'm french and i'm sorry for my awful english...
i've a great netdrg rom (2.5j FRE) on my HD2 but neither bsb tweaks, hd tweak, nor S2U2
however i don't have this so usefull incall cover slide. I searched everywhere to get a cab or files needed to get back it...
if you have any solution, you'll have all my thanks and respect !!!
I already enjoy your next answers !
thanks to all
Hey, I have a hopefully quick question, but haven't been able to find the answer I'm looking for yet.
I have a Touch Pro 2 and am really starting to like the simplistic view of the Today screen without TF3D or the Windows Default views.
Unfortunately if you don't use TF3D or Windows Default, the Today screen doesn't display missed calls or voicemail notifications. Is there a simple plugin that will do this? I've done quite a bit of research and the only real solution I've been finding is PhoneAlarm which sounds good, but I am looking for a free solution.
Anybody have any ideas? I find it hard to believe there isn't a simple (free) plugin that will do this functionality...
Thanks in advance for your help.
fighterace359 said:
Hey, I have a hopefully quick question, but haven't been able to find the answer I'm looking for yet.
I have a Touch Pro 2 and am really starting to like the simplistic view of the Today screen without TF3D or the Windows Default views.
Unfortunately if you don't use TF3D or Windows Default, the Today screen doesn't display missed calls or voicemail notifications. Is there a simple plugin that will do this? I've done quite a bit of research and the only real solution I've been finding is PhoneAlarm which sounds good, but I am looking for a free solution.
Anybody have any ideas? I find it hard to believe there isn't a simple (free) plugin that will do this functionality...
Thanks in advance for your help.
Click to expand...
Click to collapse
If you're going for the simplistic view, then why not use the LED notifications for when you have a missed call/voicemail/text/email? Also, even on the today screen, when you have a missed call or voicemail or text or whatever it should display an icon in the taskbar. Beyond that, you're right I have no idea of a free solution to this unless you enable Sense or Titanium. Maybe other people will know more, just thought I'd suggest the LED thing
Try HomeScreen PlusPlus here http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_im_cs.htm
Thanks for your suggestions.
I'm looking for something a bit more advanced than a flashing indicator on the phone I want to duplicate the functionality of the Home screen on Sense (that shows the voicemail and missed calls notification and allows you to directly call you voicemail and see the list of missed calls.)
I tried the HomeScreen PlusPlus, but it appears to only track outgoing calls/texts and not the missed calls and new voicemails...
fighterace359 said:
Thanks for your suggestions.
I'm looking for something a bit more advanced than a flashing indicator on the phone I want to duplicate the functionality of the Home screen on Sense (that shows the voicemail and missed calls notification and allows you to directly call you voicemail and see the list of missed calls.)
I tried the HomeScreen PlusPlus, but it appears to only track outgoing calls/texts and not the missed calls and new voicemails...
Click to expand...
Click to collapse
HomeScreen PlusPlus can do just that, but you need to write your own MortScripts or modify existing ones. The DigiClock skin provides these functions, but I think the graphics it comes with are for QVGA screens, so if you used VGA graphics with the skin you'd get your functionality. I may have MortScripts I modified that does exactly what your looking for as well, before I moved to Pointui Home2. Let me know if you want them and I can post them for you...
That would be great if you could post them - I'd love to try them out.
Thanks!