X1 Speaker intermitted stops working w/R3AA - XPERIA X1 General

I have the X1i with generic_uk R3AA010 and found that sometimes (about 5 times now since install) the speaker does not play a sound!
I fix that by turning the media player on and play a music and then after a short cracking it starts playing the sound again.
But if an alarm would sound or the phone would ring... no sound would be heard.
Anybody else experiencing this or might it be a hardware failure?
Almost sure that with the R2AA it did not do that!
PS
I think it happens after a Reminder Alarm went off....!

yes the same problem here, so annoying I was just ringtones off. I fixed it doing a hard reset ... I've had this trouble at least 4 times, and I think that it always happens next to charge it (not by computer), is it the same for you?

Do you have MS Voice Command installed??? I do!
So far I have isolated it to happen right after a Reminder Alarm went off.
I don't know if that is the reason alone or combined with the fact that I also have MS Voice Command installed. It could be that the phone does not know WHERE to play the Reminder Alarm and perhaps that messes up the speaker output...?
So it would be interesting if YOU too have voice command.

Related

My Trinity stopped ringing

In between testing Karmba and Schaps ROMs on my Trinity I realized that it was not ringing any more. Income calls get through, I can see the pop un in the screen but no audible ring. Music and every other audible notification is working fine.Last night I flashed back to Karmba a7.2 elias, and it started ringing, but this morning problem was there again. Any idea? Will be that soft or hard problem?
No ring
I have the same problem. I cannot get my phone to ring. I what WM6.1 and when you try and change the ring, it will revert back to "Ring-WindowsMob" and you can not exit the screen by hitting the "OK" button or the "OK" on the screen. Any help would be great.
Scott
I just have the same problem after a couple of moths using Faman 4.0 with no mayor issues, it stopped ringing, all other sounds or music are ok.
I had the same problem, because tha wma file format was associated to another player and not to the standard player...
http://www.freewarepocketpc.net/ppc-download-pmclean-v1-06.html
The Notification bug in Windows Mobile 2003 / WM 5.0 that causes slowdowns and alarm problems, i have resolved my problem with pmclean .
See also in main menu "Tools > Automatic Start"
sorry for my bad english,i'm italian people
Happened on my Xperia
I lost the incoming rings and the ability to change ringtone when I associated wma files with mortplayer.
I unchecked it in mortplayers settings and now everything is fine again.
Thanks speederi.
guys, it might be a 3rd party software that causes the issue. Did you guys install any other softwares that relates to audio before the problem occurs?
Like myself, i installed SRS WOW (and might did something wrong to it) - sounds were ok but after i turn off the device and wake it up, sounds are gone - actually it still plays, but very2 soft and you can hardly hear (even if i set the vol on max).
Doing an uninstall doesn't help at all. Luckily i had backup (using SPB) before installation, so i just restore back those data and got everything working back as normal.
Maybe more info would help for the rest to troubleshoots?

sound stops working!!

in the past week i've found trhe sound in the music player will randomly stop working. the track keeps playing via the movement bar but there's no sound. i've checked the volume and this isnt a problem and there's no sound in coreplayer either when this happens.
the headphones are fine because unplugging them doenst bring the sound on either (via the speaker). the only way to get it working is to reset. it's strnage ebcause sometimes it goes for ages without a prob, soemtimes it happens after 5 minutes...
anyone got any ideas? I'm fairly certain it's a software issue as unplugging the headphone jack makes a noise
ok still dpont know the solution but i just left my phone alone for 30mins after it last stopped making sound and now it's making sound again (without resetting). is it a memory problem??
backup, hardreset, restore. it's the only way to be sure.
Hope you didn't do a hard reset yet as the post above me urged. Like you said once the TF3D mp3 player stops playing (the sound) coreplayer doesn't work either. Now, i'm guessing WM player doesn't work either, but oddly the radio does? One more question, are you running Gyrrator in the background? Let me know and i'll try and help you out promptly.
Svegetto said:
Hope you didn't do a hard reset yet as the post above me urged. Like you said once the TF3D mp3 player stops playing (the sound) coreplayer doesn't work either. Now, i'm guessing WM player doesn't work either, but oddly the radio does? One more question, are you running Gyrrator in the background? Let me know and i'll try and help you out promptly.
Click to expand...
Click to collapse
I'm having the same problem with the sound.
Yes, the radio works, but nothing else, after unplugging the headphones it takes a while for the headphone icon to disappear and when plugged in it takes it longer than usual to appear. Doesnt fix the sound though. I have Gyrator 2 on auto start but i usually close it. At the time of the sound's disappearing it was off.
Mine only does it after i've answered a call through the headset, after the call is finished, the song continues playing and after a while or when the next song comes up, the sound disappears and can only be fixed through a soft reset.
Also mine refuses to display the embedded album art for every song, just chooses one and goes with that cover. And there used to be more covers behing the one running, but now it's just the one.
Hope someone can help me with any of this.
Thanks.
Svegetto said:
Hope you didn't do a hard reset yet as the post above me urged. Like you said once the TF3D mp3 player stops playing (the sound) coreplayer doesn't work either. Now, i'm guessing WM player doesn't work either, but oddly the radio does? One more question, are you running Gyrrator in the background? Let me know and i'll try and help you out promptly.
Click to expand...
Click to collapse
yep spot on, gyrattor 2 is running in the bakground and i havent hard reset. havent actually tried using WMplayer or the radio as i dont use those functions but I'd also assume they prob wont work either
Ok, not guareenting anything, but this might/should fix it. I'm guessing you did this through Gyrrator (though u could have prolly done it via windows too somehow, but my money on Gyrrator). What's prolly happening is that in Gyrrator you have it set to "Suspend Device" for one of the events (to turn off the screen). Instead change this to "Turn Screen Off." Suspending the device causes u to loose sound in most apps (radio still works fine). When you hit the power button, this only turns the screen off and does not actually suspend the device while you're playing music. Let me know if it worked.
good luck
looked thropugh my events which are all the default ones and nothing was set to suspend
could it be something is S2U2? theres an option there which is worded "Dont suspend power" and mine is set to off. Do i need tio change it? (damn double negatives)
My Gyrator had a suspend device event, removed it and we'll see how it goes.
Insaneboy said:
My Gyrator had a suspend device event, removed it and we'll see how it goes.
Click to expand...
Click to collapse
yes that should fix it for you, but let us know just to make sure
Pierced Soul said:
looked thropugh my events which are all the default ones and nothing was set to suspend
could it be something is S2U2? theres an option there which is worded "Dont suspend power" and mine is set to off. Do i need tio change it? (damn double negatives)
Click to expand...
Click to collapse
yes, sounds like a double negative to me, so switch that to "on" so it won't suspend power. Let us know if it worked.
Svegetto said:
yes that should fix it for you, but let us know just to make sure
Click to expand...
Click to collapse
Nope, didn't.
Had the same problem today. Only happens after i receive a call via the headset.
Sound is completely stopped working!
The sound on my THD has completely stopped working. I've only had it for a few days, and suddenly when I was working on it, I realized there was no sound coming out of the speakers. It doesnt work in WMP, Coreplayer, the radio or the built in touchflo3dplayer. It does, however, work when I plug in the headset, but still no sound in the speakers though. I've tried soft reset, hard reset, and it doesn't even make a sound in the beginning when HTC logo comes on.
Any ideas about what's wrong, or do I just send it back for support?
i also got a problem with sounds, sometimes when i use youtubeclient, my sound stops working, and just the occasional tac in sound, then i have to reset my HD te get sound again, ive done 3 hard resets, and it even happenend when i booted youtube right after hard reset was done... does somebody know the problem?
renoadhd said:
The sound on my THD has completely stopped working. I've only had it for a few days, and suddenly when I was working on it, I realized there was no sound coming out of the speakers. It doesnt work in WMP, Coreplayer, the radio or the built in touchflo3dplayer. It does, however, work when I plug in the headset, but still no sound in the speakers though. I've tried soft reset, hard reset, and it doesn't even make a sound in the beginning when HTC logo comes on.
Any ideas about what's wrong, or do I just send it back for support?
Click to expand...
Click to collapse
Hi, I have the exact same problem. It was perfectly fine till I received an SMS and everything after that, sound from the loud speaker does not work
Same issue here. The problem is caused by S2U2. The audio driver crashes everytime S2U2 locked the phone while there is a high usage of audio (e.g. by the TF3D MP3player). With S2U2 disabled everything stays normal.
I guess it has something to do with the new 1.40 version of S2U2. I just posted a request into the S2U2 thread.
I got the problem, too.
Thanks you found the reason for this sound-problem.
I hope S2U2 will fix this in next version.
CWempe said:
I got the problem, too.
Thanks you found the reason for this sound-problem.
I hope S2U2 will fix this in next version.
Click to expand...
Click to collapse
I hope so too because there is no workaround. you cannot define the player as an exception because it is part of manila :-(
I also can confirm the problem with S2U2!
It also happen when you use the udio player. Once S2U2 locks the device the audio freezes.
Hi,
I have this same problem too, but haven't got S2U2 installed. I have found out what causes the problem. It only happens when I use the headset that came with the phone. When the button on the microphone to pick up a call is pressed for a longer time, the sound stops, while the mp3 (or other file) keeps on playing.
So that's the way to get the problem to appear... now a solution to make it go away. And not the answer, don't use that headset...
Up till now the only way I have found to make the sound come back is to do a soft-reset.

HELP NEEDED!!! No Sound whatsoever

Hello,
i seriously need help.
Until this morning, my X1 worked. Over the last few days I was playing around a bit with various TF3D options, etc. I should note that I did not touch the ROM.
Then suddenly my phone gave no sound anymore.
No audible resonse to a stilus click on the screen.
No sound from FM radio.
No sound from phone (neither ring nor can I hear the caller).
(Vibra alarm works when activated though)
When switching to speakerphone I hear a very soft static crackle when doing the switch. Just as if the speaker is turned on. But then - no sound at all.
No microphone function on phone (caller cannot hear me).
No sound via headphones on phone.
No sound via headphones on MP3 playback.
Everything else appart from sound works. Even the phone can make a connection when calling - you just hear nothing.
I tried a soft reset. Nothing - still no sound.
Then I tried a hard reset:
Obviously the hardware of my speaker is ok. Because when I make a hard reset, there is the "pling" sound to inform me, that I should calibrate my screen.
Then there is another "pling" when the message appear, asking if I want to get the automatic provider settings updated.
But afterwards - no sound at all in the whole phone.
Then I went to update the ROM, thinking I might have (no idea how, but you never know) done something to audio drivers. I replaced my German T-Mobile ROM with the prepared German ROM without branding from this thread:
http://forum.xda-developers.com/showthread.php?t=446070
But still - same result as above.
Anyone got any idea?
Really nobody having any helpful comment?
did you try to change the radio??
I flashed a whole new ROM - same problem persists.
Besides: It´s not a Radio problem because system sounds and MP3 playback don't have any sound either.
Stating the obvious
Sorry to state the obvious but it sounds like the connection or the speaker module has gone. Have you recently tried the head phones on the X1? please see below link for a possible reason.
http://forum.xda-developers.com/showthread.php?t=282553
excersise your right to return
Regards,
Creamy-Goodness
Hello Creamy-Goodness,
thanks for you input.
If there was somewhere a hardware switch for sound output to speaker or headphones (which I doubt) that is stuck, it would not explain why I have neither sound in speaker NOR headphones. (One would assume that depending on the position of the switch at least one of the two should work.)
Apart from that I only tried the headphones to troubleshoot the problem after I found out there was no sound.
Nevertheless interesting, that this happens to other devices.
Speaker module cannot have gone either. There is an audible system sound from speaker right after hard reset to inform me that I need to calibrate the screen - but no sound anymore afterwards.
I will try to have the device swapped next week.
reg. sound issue
I'm suffering from the same problem here.
it only freggin vibrates.
TheMobilist said:
I flashed a whole new ROM - same problem persists.
Click to expand...
Click to collapse
Usually there is a simple fix which involves replacing a DLL, but not in this case of course - unless that ROM includes the bad DLL. I seem to remember it was a problem which occured after installing TF3D, but I couldn't find anything when searching just now.
It might be worth you checking the ear-speaker sound (make a phone call), as there is always the possibility that sound is being re-directed or intercepted (by something like Troca2). Check what programs and services are running.
Tests should be done with a known-to-work-fine-ROM of course.
Okay, I finally got the original ROM to flash the X1 back.
And strangely - when after one week of not using it I turned it on again to flash the phone, I got my sound back.
I have absolutely no idea what happened and why, but I am glad that I do not have to send it back.
@k_ash82
What I did is:
Turned my X1 off (not just stand-by), really off.
Waited one week.
Switched it on again.
I had my sound back.
No idea why, but maybe that works for you as well?
Just try it and please post your experience.
It would be very kind of you to share the german t-mobile stock rom with the community . Perhaps it could be added to "Xperia ROM and Guides" Thread, too.
I have no sound sometimes with this rom
http://forum.xda-developers.com/showthread.php?t=460190.
After switch off and turn on the phone again the sound is back.
Karsten
i have original sony rom (no branding) and also the same problems
no sound after a while (sometimes when phone goes in standby, sometimes just without a reason)
cannot play any sound in no application (media player,core player,etc) also the phone ringing or sms sound is off.
but the most annoying thing is, i can make a call, the call goes through, but I can hear nothing from the called person.
sometimes it works when i switch of the phone and restart, but sometimes I have to do 4 or 5 restarts.
the phone is now 1 week old, an I haven't installed Touch3D or anything like that, because I made hardreset and left the original configuration on factory settings, just to make sure, that it's no software error.
anyone got a solve for this problem actually?
if I ask google, there are many people with this problem, but no solve found till now
i have an issue with the speaker too but not exactly the same as the one described above.
my speaker still plays sound but it is about 10% of the original volume when it is already set to loudest (you have to put your ear right next to the speaker to hear the sound)
after i re-flashed the rom, it worked normally for about half a day until the problem returned
can anyone please help??
i keep missing my calls ><
thanks
this is a well known issue on some X1 phones ! you cant fix this with any software-update because it is hardware related. some x1 phones have it like every 2 weeks, others 3-4 times a day. most of the time you can just reset your phone but this is not a solution.
you have to send it back to SE in exchange for a new one.
i called my provider (o2) and they delivered a new x1 _on the next day_ in exchange (they have a 48 hrs delivery/pickup/return service).
the new phone works just fine !
- QuadWord

Sense music player problem

When I am playing music using HTC's sense music player, if I press the end call button to lock the phone, the music stops. This problem has only started happening last night, before it was working fine. The only new programme I have installed is SPB Travellers Demo. Any suggestions to fix this?
PS: if I manually lock the phone, it keeps playing.
It shouldnt happen if your using headphones, if your listening through the speaker then you just have to let the screen turn off on its own, just set it to time out after 30 secs........ its annoying i know.....
havent noticed a fix for this anywhere though.........
I havent really looked for one though to be honest, there probably is one.......
Thanks but I'm sure it used to work before ...
SeaViper said:
Thanks but I'm sure it used to work before ...
Click to expand...
Click to collapse
Now that you mention it I only noticed this recently and like you I dont remember it having happened before but because I rarely listen through the speaker I just thought I was imagining things and it had always done that...........
Now I'm really confused........
I know, does anyone know what might have caused this problem or any solutions?
sorry i dont know what causes this but it happens when i use headphones sometimes to - i find if i press the end call button straight after pressing play it stops but if you let it play for a few seconds then press it its ok?
Might be obvious but have you installed the official music stability update?
Yep, as I say, it appeared to be working fine until last night. The only programme I have recently installed is SPB Travellers Demo.

Alarm sound not functioning properly help!

Hey,
Since I've had this phone I've overslept way too much, when the alarm goes off the sound is quiet although my alarm volume is turned all the way up. Now when the alarm is going off and I unlock my phone the sound instantly shoots up. I tried to disable v4a, but the issue still continues. I stream spotify to my Bluetooth speaker overnight. And the alarm goes through that and my phone speaker at the same time..? I used to have a z5 and when the alarm would go off the Bluetooth music would cut out and the alarm would only come through my phone speaker.
It's a serious issue, I don't know how to possibly fix this.
Its been like this since out of the box, had like 3 factory resets since, for unlocking bootloader and such so that won't help

Categories

Resources