Database Users

Please help me installing a new ROM

Hi All,
I have a Tmobile PPC Phone Edition (Wallaby) it was upgraded to WM2003 and was working fine and suddenly stop responding after Activesync and I had to hard reset it to make it work again.
I tried to install the XDA developers edition without luck since the program couldnt detect the USB connection. I then backed up in my SD card the oroginal OS ROM (Wm2003) and reinstalled it but after I did so I lost my Phone capabilities (does not give phone settings or the signal bar appears on the screen) and what is worst I can not do Activesync since it appears connected but is not.
Can anyone please help me? Maybe guiding me on how can I put a good ROM on my SD card and install from there? Porbably the XDA Devleoper Edition?
Thanks to all and merry Xmas and a Great 2005.

May be you can try to search on this website rather than setting up a new topic. I have seen and gone through your situation before.

Big problem

Hi
I am new here and i have problem
When i turn on my qtek9000, i recieve message Serial V.100.
If i connect USB cable it displays USB instead of Serial.
This happened when i tried to do radio upgrade (through usb hub, sim and sd were also in phone...).
I have 1gb SD card and also card reader mounted in laptop, so transfering files should not be problem.
Can someone help me with step-by-step procedure how to make my qtek work back. I used a lot of search but i am even more confused....
I just remember that when qtek worked Radio was something like 1.0.3.1 and also WWE was writen somewhere....
Probably i should put rom to sd with ntrw (which wersion of both),.......
please help....

might be a dumb question on my part - but have you tried a reset (initially a soft one but then a hard one of course, if nothing else works...) ???
I mean you will at least be able to revert back to the condition 'out of the package'...
Hope everything works out!

jup.both things NOT HELPED

looks like you're stuck in the bootloader mode....
try flashing the rom & the radio rom once again by connecting it to your laptop's usb...
i guess something screwed up while you were upgraging your radio rom...and you'd need to redo it!
Best,
San

can you please write me a procedure?

You might want to check the following thread. Everything is well described.
Cheers
hrb
http://forum.xda-developers.com/viewtopic.php?t=32725

i am trying to download files but i get permission denied all the time

You mean you get an error when clicking this link ?
ftp://xdaupload:[email protected]/Universal
I don't understand that, it works perfectly well for me
Cheers
hrb

I have solved problem with Radio upgrade. I am in much better mood now. 8)
Anyway i have 4 more questions.
1.) I am using bluetooth car-instalation Parrot CK3100. I am wondering if is possible to transfer any other sound except telephone conversations to that device. When i had Nokia 9500 i was able to hear every single click,tone,...i made on phone also on car-instalation. I also heard nokia ringtone in car instalation.With qtek i am getting generic car-instalation ringing tone instead of phone ringing. Otherwise primary intention (hands free talking) works fine. I would like to have that to be able to hear voices from various GPS software.
2.) Since QTEK9000 is PDA and phone in single unit I would like to have in car GPS application "always on top". Like previously mentioned i can easily manage my calls with car-instalation. Therefore i would like to run Phone section in background or GPS applications on top.I hope you will understand what i would like to say
3.) I also need in-car holder for qtek. Do you have any reccomendations?
4.)
My settings:
R: 1.04.02
G: 42.37.P8
D: 1.13.64.WWE
Is that ok or should i upgrade?

Stuck in bootloader mode
Hi guys,
Got stuck in bootloader mode following an upgrade attempt. Tried to reflash radio using the files from the pload folder only to get an error saying it's for the wrong device - tried this several times with the same result.
any ideas?
Is there a binary and a tool I can just do a straight upload?
thanks

Re: Stuck in bootloader mode
Bauser_uk said:
Hi guys,
Got stuck in bootloader mode following an upgrade attempt. Tried to reflash radio using the files from the pload folder only to get an error saying it's for the wrong device - tried this several times with the same result.
any ideas?
Is there a binary and a tool I can just do a straight upload?
thanks
Click to expand...
Click to collapse
try it with this file -
1. put radio.nbf and the file attached below in the same folder and run the exe with ur device connected to usb in bootloader mode...
2. hope it flashes it
S

Thanks DreamTheater
Thanks for your help - unfortunately I got the same message, ie this rom is not meant for this device etc...
Will see O2 can do anything (who's that laughing...???) - was going to buy a new xda mini anyway...!

1. REMOVE your SD/MMC card.
2. Soft/hard reset.
3. Run the upgarde again.
Step 1 above solved my problem.

PLEASE Help! Activesync won't connect and didn't back-up

Hi all -
Newbie here, so I'll apologize upfront for any errors. I've been searching for the last 6 hours and have learned a lot, but still can't fix my problem.
I tried to upgrade the radio only, but after that there is no radio version, no phone or internet, system on MDA is VERY slow, and I can't connect to active sync. I can get bootloader up, but when I try to install the factory rom I downloaded from this site, it says "no device connected." I've tried to copy it to an sd card and install from there, but that doesn't work either.
Every suggestion seems to need activesync, which I don't have. Is there a way to download and copy something to an SD card and install rom from there?
Please help. I'm out of town and without a phone.
Any help would be MUCH appreciated.
Thanks in advance!!

I have same problem
No phone, everything slow, activesync not working...
How can i install everything again if it doesnt recognize PC???
Pls help

Unable to Syn with PC

Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.

You may still be able to reflash the ROM using an SD card- look for instructions in the WiKi (you may need to look in the Hermes section, but the procedure is the same)

already re flash another rom "PDAVIET" but the problem is still unsolved!
what is possible wrongs?

Newbie wants WM6

Hello there,
Ive been running around this forum since yesterday night trying to change my qtek2020 from wm2003 to wm6. But there's a lot of dust in the air... to much information, most of it very old, so... here's where i am right now.
1-I've downloaded a rom ( a nb.nbf file)
2- donwloaded a program called HimaUpgradeUt_noID.exe, that I know it's used to install the roms.
But now, I connect the ppc to the usb cable (in vista) and run humaUpgradeUt_noID.exe, select the .nbf file and "next" it, but it always to no success.
I've tryed booting the qtek in "bootloader mode" but all I see is a "Serial v1.03" screen and nothing happens, even when connected.
So, can anyone give me a turorial on how to do this?
Thanx

the rom packets should include a readme.txt which should give a step by step guide

Thanx for your reply.
The problem is that I can't connect to my laptop on bootloader mode.
When turned on, it can connect to my laptop, but in bootloader mode it doesnt, the pocket stays in the "serial v1.03" screen.

Nevermind... solved,
As simple as... removing the SD card... LOL

The SD card is never the reason in upgrading the device using vista.
Look at this forum: http://forum.xda-developers.com/forumdisplay.php?f=387