Hi,
I'm using Dutty's ROM V3.0 with the new WM6.1 start menu.
But I was a bit to fast with tweaking the programs menu.
I accidently removed the Settings button.
But you can't restore it, you can only add programs.
Does anybody know how I can restore the Settings button in the Start Menu.
Assume you're talking about the new program launcher and not the classic menu.
HKLM\Software\HTC\Manila\ProgramLauncher\3
Command: --switchtopage Manila://settings.page
DispName: [[IDS_SETTINGSTITLE]]
IconPath: \windows\HTC\Assets\Images\programlauncher\Program_icon\settings_88.qtc
IsReadOnly:1 (Hex) (so you will not be able to delete accidentally in the future)
Path: \Windows\manila.exe
That worked, I've got the settings option back!
Thank you very much!!
how do i get to link 'all settings' on the new manila start menu rather than pointing to the settings tab ? does anyone know the exact path or a lnk file?
Thanks, all works perfectly
Related
Hi Folks,
I have just upgraded the ROM using ROMKitchen (3.17.03 ENG O2-Euro). Now, the phone icon does not appear in the main window, tough it works when I go to Start--Phone--. Can someone please tell me how I can get this phone link back on the main menu.
Thanks a lot,
Frank
Why don´t press you the green "Phone" button? It starts the phone-application automaticly.
Or just edit the startmenu settings...
Start -> Settings -> Menus
select the phone application.
Regards
Stefan
20071130 HTC_CUBE_1.0_BY_LEO2016
Fixed Cube Settings "App Launcher tab" can't show any images
Fixed Add FTouchFloConfig_v0.9
Fixed Update to TFloCubeCtrl - v1.1.0
Fixed Add FTouchFloConfig Shortcut to Start Menu
Fixed Duplicate Start FtouchFlo Programs After softrest
Fixed Enable or Disable HTC_CUBE by useing FTouchFloConfig
Readme
1. Copy file to your ppc then install to main memory
2. Start --> Programs --> FTouchFloConfig
3. Selet General tab --> Checked Enable FTouchFLO
4. Done then exit this Programs
5. Softrest Your PPC
Enjoy~~~~~~~
Device Compatibility
MIO........A700.......WM5.........Work QuickDial.exe Dead
Asus.......535.........WM6.........Work QuickDial.exe Dead
Dopod.....P800W.....WM5.........Work QuickDial.exe Dead
MIO........A501.......WM5......... Work QuickDial.exe Dead
CHT........9100.......WM6..........Work
AT&T......8525.......WM6..........Work
HTC......TYTNII......WM6..........Work
Dell......Axim X51V..WM6..........Work
Site 1
http://blog.yam.com/leo2016/article/12801568
Site 2
http://blog.pixnet.net/leo2016/post/11375616
Can you please post device compatibility list or is this for a specific device only?
Regards,
Carty..
Thanks man I will try it
let me try it. thx
Mirror please!
here is the mirror.
hope it is useful. maybe u can put it in the 1st post to make it easier?
thanks.
http://w14.easy-share.com/11341771.html
I know it's probably covered somewhere, but with so many posts on the Cube and FTouchFlo, I can't find it.... How do I get the gesture system to work on HTCAlbum after installing FTouchFlo? It's in the list of exclusions properly, but the gestures no longer work; even if I disable FTouchFlo and soft-reset my Kaiser.
Sorry guys. Is the attached file corrupted or not complete?
leo2016 said:
20071130 HTC_CUBE_1.0_BY_LEO2016
Fixed Cube Settings "App Launcher tab" can't show any images
Fixed Add FTouchFloConfig_v0.9
Fixed Update to TFloCubeCtrl - v1.1.0
Fixed Add FTouchFloConfig Shortcut to Start Menu
Fixed Duplicate Start FtouchFlo Programs After softrest
Fixed Enable or Disable HTC_CUBE by useing FTouchFloConfig
Readme
1. Copy file to your ppc then install to main memory
2. Start --> Programs --> FTouchFloConfig
3. Selet General tab --> Checked Enable FTouchFLO
4. Done then exit this Programs
5. Softrest Your PPC
Enjoy~~~~~~~
Site 1
http://blog.yam.com/leo2016/article/12801568
Site 2
http://blog.pixnet.net/leo2016/post/11375616
Click to expand...
Click to collapse
Will this work on square screens (240x240)
Works really well, thank you!
I installed this cab and all icons and configuration screens are there, but the gestures don't work.
When I want to start touchflo manually it's says it's already running so I'm sure the gestures don't work.
Any suggestions?
I may have to try this once the results are in....
mauce said:
I installed this cab and all icons and configuration screens are there, but the gestures don't work.
When I want to start touchflo manually it's says it's already running so I'm sure the gestures don't work.
Any suggestions?
Click to expand...
Click to collapse
i think the same thing happen to me.
T3D0nG said:
I installed this cab and all icons and configuration screens are there, but the gestures don't work.
When I want to start touchflo manually it's says it's already running so I'm sure the gestures don't work.
Click to expand...
Click to collapse
Readme
# Please Remove Any VER FtouchFlo、FTouchFloConfig
# Please Install HTC HOME
1. Copy file to your ppc then install to main memory
2. Start --> Programs --> FTouchFloConfig
3. Selet General tab --> Checked Enable FTouchFLO
4. Done then exit this Programs
5. Softrest Your PPC
WM5
Does this work with wm5 standard oem rom devices?
Is it the original Cube?
Is the media player interactive?
Will have efrosts touchflo installed affect it?
Thanks
It works! I followed all of the instructions in the readme file: Removed the touchflo that I already had on the device (For removing previous touchflo versions: I had my old touchflo in the start up menu in windows, and was having trouble getting rid of it since it was already running. So I cut and pasted touchflo to a different folder, soft reset, and was able to delete it so it wasn't running at start up anymore), already had HTC Home on there, installed the cab installer, went into the touchflo config file and enabled touchflo, did a soft reset, and it works perfectly.
...only thing is the "New E-Mail" and "SMS/MMS" tab seems dead, but it still works from HTC Home.
The "contact" side takes a couple of seconds to come up but thats expected. Everything else works like a charm. Easily the best one-stop .cab installer of the Touch Cube that I've tried so far.
Thanks for the post.
...sorry....I forgot:
It works fine on my AT&T 8525, WM6 offical AT&T Rom. Thanks again!
If you had FtouchFlo installed previously, make sure you delete the exe file from /Windows/Startup and leave the one from the cab installation. My cube worked after that.
ADD Device Compatibility
Works great here. I'm using a Blue Angel running xplode's latest WM6 ROM.
Thanks for the great work!
hi all !
in start menu the settings link disappear !
i don t want to hard reset, so can you explain me how to get it back ?
maybe some registry key or a shortcut is dead....
thanx !
picolo5 said:
hi all !
in start menu the settings link disappear !
i don t want to hard reset, so can you explain me how to get it back ?
maybe some registry key or a shortcut is dead....
thanx !
Click to expand...
Click to collapse
Do you have the settings folder in windows/start menu? If not, tap menu at bottom, create new folder, name the new folder "Settings", soft reset. If this don't fix it, you'll need to hard reset.
in order to sort the icons in the program tab (pressing the windows symbol under manila) i deleted a few of the icons, eg. 'settings'. now i can not add them anymore since they are not shown if i choose add..
how can this be done?
thanks.
gr8 said:
in order to sort the icons in the program tab (pressing the windows symbol under manila) i deleted a few of the icons, eg. 'settings'. now i can not add them anymore since they are not shown if i choose add..
how can this be done?
thanks.
Click to expand...
Click to collapse
..do a hard reset..
Re-install the missing programs.
both answers are wrong.
i found the solution, just install the following cab and the start-program display is set back to standard!
does this cab do anything else but repairing the start-display? I don't want to mess up any other settings of my system which is a 1.40.162.2 (49069) GER Vodafone
gr8 said:
both answers are wrong.
i found the solution, just install the following cab and the start-program display is set back to standard!
Click to expand...
Click to collapse
Hi all,
I have downloaded few tweaks & was trying those. I found that the phone is quite fast. But when I found that there is no SETTINGS menu available I was frustrated. I dunno exactly when it got deleted. How can I get it back to start menu? Can anyone let me know if any registry values to be entered to enabling it again? I believe that people here will help me out definitely. Is there any other way which from which i can restore the settings in start menu?
Thanks to you all in advance...
Waiting reply..... Please help me to get rid of this problem...
Mandar M. Oke.
Are we speaking about "cooking development" or simply you installed some tweaks in a downloaded custom rom?
Some minimum informations are required such:
_WM build
_which kind of tweaks did you make.
_a build log
Maybe u changed thé Hidesettings value to 1 instead of 0 if u use Manila ...
settings menu for >= WM5 <= WM 6.1
settings menu for >= WM5 <= WM 6.1
View Program Files; folderview.exe Unzip and put this file in you programs folder and you will be able to add it to htc home
View Settings; htcSettings.exe Unzip and put the file in you programs folder and you will be able to add it to htc home
WM6.5+ Settings Menu back via;
[APP] MySettings - easy access to ctrpnl items (old settings panel)
Have a nice day,
hi Friends,
Thanks for the help first of all... I have done few changes through SK Tools... n found this problem... I have WM6.1 build... The registry value is 0 only i have checked the same already... there is no htcsettings.exe available on my phone... also I have tried copying below given htcsettings.exe to program files, it didn't work.. i put it in windows folder too... but still unable to view settings in start menu....
Pls help
Though meant for WM6.5 it is also for previous phones
Though meant for WM6.5 it is also for previous phones with hidden system settings;
MySettings - easy access to control panel items (old settings panel)
http://forum.xda-developers.com/showthread.php?t=737689&highlight=mysettings
Did you check this link?
AND
My previous message contains both executables (both in their *.zip files);
folderview - http://forum.xda-developers.com/attachment.php?attachmentid=72770&d=1204003237
htcSettings - http://forum.xda-developers.com/attachment.php?attachmentid=102462&d=1217285749