Help Needed Htc 8XXX - P3400 General

Hey Guyz ..
i need help here ma phone is totally dead nuthing repond in it
i tried 2 setup an old WM5 source & after da installation finished ma ppc was dead & nuthing in it respond & it dont want 2 open
sooo if any1 can help i'll be pleased :X

try this
hi
i briked my phone a few days bak ie phone totally dead no screen action if this is ur problem try this
switch phone off take battery out hold power buttom for a few mins then put batt back holD camera button and then power on u will get tricolor screen use usb and flash new ROM or hold camera and do soft rest with stylus this will also give u try color boot screen ( also see my thread at gene upgrading it says hone dead )
goodluck
dallos said:
Hey Guyz ..
i need help here ma phone is totally dead nuthing repond in it
i tried 2 setup an old WM5 source & after da installation finished ma ppc was dead & nuthing in it respond & it dont want 2 open
sooo if any1 can help i'll be pleased :X
Click to expand...
Click to collapse

still nuthing happens ??? if u can tell me wht i should do in steps

1. Remove battery
2. Press and hold the power button for 5 seconds.
3. Replace battery
4. Press and hold the camera button & power button.
5. Poke "reset" with the stylus, you will get the tri color screen.
BTW flashing WM 5 was a bad idea . The gurus have suggested against it repeatedly.

u flashed ur SPL
what i knw from this is that u have flashed ur SPL using the WM5 ROM...try ti get tricolor screen as explained by Haree and see what SPL is showing on the screen....
after that we can see which ROM is suitable for u or how to flash new SPL on ur phone....
From the serial number it can be guessed (nor confirm) that ur is new gene...so read sticky's post of unbricking....
tell me wheher ur gene came with windows 6 preloaded?

the problem is i tried all this but i dont get to the boot screen
nuthing happened when i do this ... some ppl told me 2 try the JTAG method but i dunno how 2 do it ??

if Any1 could explain 2 me how 2 do the JTAG Method it'll be gr8 ....
ma mail is [email protected] ...
thx for ur help in advance

Related

gENE STUCK ON BOOT LOGGER WHILE WM 6.1 UPDATE

hi mithun, mUNS , ABEBRAKER , very sad man..! i was trying to update to WM6.1 now the phone is stuck in boot logger screen...! nothing else happeninig ..! any idea whT TO O....?
Gene stuck on boot logger , pics & video attached
This is how scary it becomes....
gene stuck
now it shows the colour screen after i press and hold power and camera keys...!but flashing gets interupted in 2 % saying image is corrupted ... i dont have the original rom....
bryangopan said:
now it shows the colour screen after i press and hold power and camera keys...!but flashing gets interupted in 2 % saying image is corrupted ... i dont have the original rom....
Click to expand...
Click to collapse
do some search before you open up a new thread brother. anyways, here's a possible solution (you may have to try it out coz i never found myself in this situation)
this thread (http://forum.xda-developers.com/showthread.php?t=366505) has one solution (http://forum.xda-developers.com/showpost.php?p=1915254&postcount=5) from orefkov which may help or this thread (http://forum.xda-developers.com/showthread.php?t=351234) from nirvana might help too
hope this helps in recovering your gene. also i suggest going further, you should get into flashing or cooking only if you know what you doing
gene boot issue
Man as you know i am already running wm6 by muns ...! so that means i have done it before... this is really strange ..! i was worried. I am stilll worried...let me go through ure links...i'll let you know..!
Thank you
Stuck from boot loader resolved
Man i called htc service centre here in bangalore , they gave me a simple solution for my problem...
We can hard reset the device just by pressing and holding both the " -" keys right above the answer and end keys and pressing the power button . It will run the ghost image and recover the device ...
note :
1) make sure your battery is more than 50 % charged .
2)you must do a power cycle in your device ( take out the battery , then press and hold the power button ) before you do a hard reset ...
My device is back to normal...
video is here
there you go http://www.youtube.com/watch?v=R53104JTgNI
Wow ! Now this is what i call "life saving medicine". Thanks for giving it !
I am referring to Ghost image.What exactly it is and is it safe even after flashing ? Finally what is power cycle(Is it complete discharge of backup battery).
Thanks again buddy
P.S. Can u give HTC Bangalore number. Thanks.
rex4u said:
Wow ! Now this is what i call "life saving medicine". Thanks for giving it !
I am referring to Ghost image.What exactly it is and is it safe even after flashing ? Finally what is power cycle(Is it complete discharge of backup battery).
Thanks again buddy
P.S. Can u give HTC Bangalore number. Thanks.
Click to expand...
Click to collapse
refer to my you tube video buddy , all info is given there ...
http://www.youtube.com/watch?v=R53104JTgNI
Thanks a lot buddy to take up so much of pain and posting this video.
Can I ask a little favour - plz post this video here so that I can download it and keep it.Embarassingly my net is extremely slow so I could not watch it smoothly.
Plz if u can.
Thanks once again bro'.
rex4u said:
Thanks a lot buddy to take up so much of pain and posting this video.
Can I ask a little favour - plz post this video here so that I can download it and keep it.Embarassingly my net is extremely slow so I could not watch it smoothly.
Plz if u can.
Thanks once again bro'.
Click to expand...
Click to collapse
will do that soon
Tnx
bryangopan said:
Man i called htc service centre here in bangalore , they gave me a simple solution for my problem...
We can hard reset the device just by pressing and holding both the " -" keys right above the answer and end keys and pressing the power button . It will run the ghost image and recover the device ...
note :
1) make sure your battery is more than 50 % charged .
2)you must do a power cycle in your device ( take out the battery , then press and hold the power button ) before you do a hard reset ...
My device is back to normal...
video is here
there you go http://www.youtube.com/watch?v=R53104JTgNI
Click to expand...
Click to collapse
TNX buddy for sharing this information ..I also face this problem today but as I already read ur post ..I knw wat to do ..tnx man
i faced error INVALID VENDER ID when flashing at 2%
i don't know how to upgrade please help me
i have the same err
snggwt said:
i don't know how to upgrade please help me
Click to expand...
Click to collapse
I guess your spl is giving you the trouble. search for olipro"s CID unlock file , you should be ok after this .
How can one make sure that the battery is more than 50% charged when the phone is showing the bootloader screen... If I keep it for charging in that state, does it get charged?
Please help
Start the phone in bootloader without connecting the cable. NOw press the powerbutton for a while to shutdown the phone completely. Then plugin the cable or charger, it will start charging without getting started. Charge it for sometime, or to be on the saferside, untill the light turns into gree from amber.
@bryabgopan just a road down memory lane for u
hi
i dont know if u remember long time when i sent a PM to u asking help to upgrade my 3400i u gave me a very rude reply and said its not rocket science and to look around but i see u asking for help
so its different when u need help and some one else asks u for the same im saying this because ur words then really hurt me its happened around 3-4 months back
so my humble request to u is if u cant or dont want to help just say it in a nice manner and not in a rude manner see u wanted help and u can see people trying to help u here
bryangopan said:
Man i called htc service centre here in bangalore , they gave me a simple solution for my problem...
We can hard reset the device just by pressing and holding both the " -" keys right above the answer and end keys and pressing the power button . It will run the ghost image and recover the device ...
note :
1) make sure your battery is more than 50 % charged .
2)you must do a power cycle in your device ( take out the battery , then press and hold the power button ) before you do a hard reset ...
My device is back to normal...
video is here
there you go http://www.youtube.com/watch?v=R53104JTgNI
Click to expand...
Click to collapse
krazy_about_technology said:
Start the phone in bootloader without connecting the cable. NOw press the powerbutton for a while to shutdown the phone completely. Then plugin the cable or charger, it will start charging without getting started. Charge it for sometime, or to be on the saferside, untill the light turns into gree from amber.
Click to expand...
Click to collapse
LOL you are even answering to pple posting in the wrong Section
Hard Reset not working HTC P3400
I have Hard Reset my HTC P3400,but it hangs on the boot screen.
It show on the screen as,
ONBL 1.07.0000
SPL 1.07.Oref
GSM 02.79.90
OS 1.9.1.1
I kept the mobile on battery for at leats 5 minutes but no success.
What do i do now ?
manisharma31 said:
I have Hard Reset my HTC P3400,but it hangs on the boot screen.
It show on the screen as,
ONBL 1.07.0000
SPL 1.07.Oref
GSM 02.79.90
OS 1.9.1.1
I kept the mobile on battery for at leats 5 minutes but no success.
What do i do now ?
Click to expand...
Click to collapse
hi
try this
if ur phone comes on connect the USB cable to phone and see if u get the USB words on the phone if so good try flashing any other rom from ur PC to ur phone
goodluck

HELP with JasJar

hey guys weird thing has happnd to my JasJar firstly the screen is crashed so i cud barel seen anything in dark but thru sunlight i cud see things on my phone
later i installed a rom from here i dont remember wich one it dont get start up it just stucks up at imate screen (that blue color 1) it doesnt go further from that
and no response from my phone pls help as i dont have any mobile right now ... pls help me out guys.. cud i ever make my JasJar live again??? i wish if the phone was on to install the original rom from the webstie or any rom from here to make it work ......
thnks and hoping for a good reply.. fingers crossed...
drift_amit said:
thnks and hoping for a good reply.. fingers crossed...
Click to expand...
Click to collapse
First of all welcome to the forum... and it's not a big deal and for sure your JASJAR will be rocking... ok did you try to flash the rom in XP(it's more easier) did you follow all the steps properly ... if yes try docformat and install another rom... and see wiki for additional informations and instructions....
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
cheers
Rajiv
thnx dude.. but for this my JasJar must b detected by my pc... and i had used it in Xp earlier and now i have vista Installed (any big deal ??)
now while upgrading again wud make it in working???
Yes you can flash in vista
do a search and you´ll find the way!!
http://forum.xda-developers.com/showthread.php?t=313001&highlight=flashing+vista
sorry but my device just restarts( i mean just comes back to splash screen where i can see only imate and the rgd versions) when i try to enter the bootloader mode.. plss help me out guys
drift_amit said:
sorry but my device just restarts( i mean just comes back to splash screen where i can see only imate and the rgd versions) when i try to enter the bootloader mode.. plss help me out guys
Click to expand...
Click to collapse
Ok press the backlight button and power button.. and after that press reset button but still holding both buttons ( backlight & power)... try it few times and you'll succeed... and one more think press the backlight button only and power button only to check if they are working correctly or not ....
Cheers
Rajiv
ok.. now.. by reading other forums and formatting tips of Universal on Vista ... and all other wiki information the original imate rom from the website.. damn it is installing now.,.. and my fingers are crossed .. it is installing and am waiting to finish it

masters please help for gene 3400i

Hello masters.
I am very new for repair gene p3400i
Gene P4300i speaker on & off problem already I post this problem.
I am try for upgrade ROM . last day I run test SPL unable to run then I removed from mobile test spl. To day I connected gene to pc for battery charge I am verifying how to run gene_hspl_HT8x. not installed and not run. After some time I have seen mobile is dead only 3lights on glowing at power call key and end key. Then I removed battery put it back when power on 3lights are blinking. I tried to put boot mode by press camera and power no boot mode .
Please kindly know me the problem and solution.
have u tried to get in bootloader ??????
yes i tried to get bootloder ,press & hold camera key and power . but not gets bootloder.
first thing are u sure that ur battery is charged enough to boot ?? then
remove battery and then press on button for few seconeds then put battery back and then hold camera button and then press on button . if u get into boot loader then tell waht it shows on screen .
if not then tell again.
after wash and dry mother bord now working . but problem hands free on . if off mode also.
i think its a hardware related problem not a software problem.

Gene Dead

My htc gene is bricked.I have tried all the methods. I am unable to recover using Orefkov's method. When I try to press power key or soft reset button , onlr red and green light blinks. Nothing else happens. no charging indecator when i connect it to wall charger. I am even not getting the tri color screen.
please help me. to at least get into bootloader.
I have tried to connect using MTTY also but it is not detected using usb. help less now with no bootloader.
pravin.kamdi said:
My htc gene is bricked.I have tried all the methods. I am unable to recover using Orefkov's method. When I try to press power key or soft reset button , onlr red and green light blinks. Nothing else happens. no charging indecator when i connect it to wall charger. I am even not getting the tri color screen.
please help me. to at least get into bootloader.
I have tried to connect using MTTY also but it is not detected using usb. help less now with no bootloader.
Click to expand...
Click to collapse
don't panic
to enter boot loader just on device
press and hold camera button and press soft reset button .
deepv84 said:
don't panic
to enter boot loader just on device
press and hold camera button and press soft reset button .
Click to expand...
Click to collapse
No luck. I have tried to go to bootloader using press and hold camera button and press soft reset button
pravin.kamdi said:
No luck. I have tried to go to bootloader using press and hold camera button and press soft reset button
Click to expand...
Click to collapse
remove battery and then hold power button for 20 seconds (this will remove stored power from device )
then insert battery
press and hold camera button then press power to bootloader
hope this will work
Pravin,
What happened??
Did it work?
no bro i have tried power cycling also nothing is working.
ok dude did it worked?
if not tell me i'll help you via team vewer to unbrick it
dont worry just dont panic i've unbricked mine too
what happen
hey bro ,,
what happen, r u able u restore u r set...... if not tell us ...
bye
My Gene also dead
Please help me,,
i try to update rom but it fail,
now when i start my gene it show color screen...
please help me what i do
my yahoo chat id [email protected]
added you on yahoo
hey amit ,,
can u explain more in detail what u do exactly with u r handset..
.......
When i try to update my rom, i don`t know what happan but now, my phone not start when i try to start only blue and red light flash. nothing.
when i press reset with camera button i saw three color screen.
Tell me what i do..............
hello gurusingh,
I was update my htc p3400i ROM, after completion. Phone turn off but not restart, if I try camera button and reset button only green and red right blink not any indication shown on screen,…please help me.
I shall very thankful, if you solve my problem
Sanmukh singh
MSL, Mumbai.
hi gurusinghbrar,
My Htc p3400, can not start......
i was updating this rom "RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship" after 100% complete it turns off , but not start only Green and red light flash during press reset button...
i was try all methods,#remove batery 20 sec and then start with camer button & both camera and voice button. but result is same...
#No indication during Charging.,no usb detected in PC.
please help how i can recover my device.....
sanmukh singh
[email protected]
HTC P3400i GENE100 Dead
I have a HTC P3400i GENE100. I successfully installed orefkov SPL and then upgraded my original ROM WM 6.0 to cooked wm 6.5. After installation my device was too slow than before hence I flashed it with RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79 .90_Ship.exe. After flashing it 100 % my New Gene restarted, but didnt boot to booting screen. Its not going into bootloader mode also. It shows blank screen i.e. black. I tried several combinations of keys (Camera + Power button or Camera + Reset or by pressing both "-" button + Reset) for going it to bootloader mode. But none of them working. When I plug in charger the green & red light blinks once and nothing else. Same if I press reset with stylus, the green & red light blinks once and nothing else happens. I know that I have bricked my New Gene, when I flashed the ROM, which was meant for Old Gene, which I came to know after reading the posts in this forum. I have to use JTAG Method for recovering my Gene. Hence I have read many posts about it in this forum. But can any one of the great masters here, help me with a proper guide that can help me recover my Gene 100%.
Thank you for spending your valuable time in reading this post.
Regards
Parag Gawali
prgawali said:
I have a HTC P3400i GENE100. I successfully installed orefkov SPL and then upgraded my original ROM WM 6.0 to cooked wm 6.5. After installation my device was too slow than before hence I flashed it with RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79 .90_Ship.exe. After flashing it 100 % my New Gene restarted, but didnt boot to booting screen. Its not going into bootloader mode also. It shows blank screen i.e. black. I tried several combinations of keys (Camera + Power button or Camera + Reset or by pressing both "-" button + Reset) for going it to bootloader mode. But none of them working. When I plug in charger the green & red light blinks once and nothing else. Same if I press reset with stylus, the green & red light blinks once and nothing else happens. I know that I have bricked my New Gene, when I flashed the ROM, which was meant for Old Gene, which I came to know after reading the posts in this forum. I have to use JTAG Method for recovering my Gene. Hence I have read many posts about it in this forum. But can any one of the great masters here, help me with a proper guide that can help me recover my Gene 100%.
Thank you for spending your valuable time in reading this post.
Regards
Parag Gawali
Click to expand...
Click to collapse
check ur mail
Gene back to life
Thanks to Sumeet...
I got my HTC P-3400i New Gene back to life. It works better too. Sumeet is the man, who has given life to my entirely dead gene. I thank to him and suggest needy to contact him in their cases.
Thanks to XDA-developers Forum too...
Regards
Parag Gawali
same problem i had pls help me
Fido/Sumeet, please help me my gene got bricked when i was downgrading my gene from 6.1 to stock rom. after successful rom update my gene doesnt got restarted i'm getting black blank screen.
pleaseeeeeeeeeeee guys help me.....

[Q] dead device

Hi
Plssssss Help me. i'm using HTC touch 3450 and i have upgraded my device with wm6.1
NOW THE PROBLEM IS...
1. MY DEVICE BUTTONS(HARD KEYS) NOT WORKING BUT I CAN MAKE THE DEVICE IN BOOTLOADER (TRICOLOR) MODE BY PRESSING CAMERA + POWER BUTTON.
2. AFTER INSTALLING A ROM WHENEVER MY DEVICE STARTS IT SHOWS THE HARD RESET SCREEN (BLACK SCREEN........... ALL THE DATA ...BLAH BLAB......)
I HAVE TO REMOVE THE BATTERY AND START THE DEVICE AFTER 30 MINS.) PLEASE NEED THE SOLUTION ......
3. I AM TRAYING THIS FOR A MONTH BUT NOTHING HAPPENS
PLZ GUYS HELP MEEEEEEEEEEEE OTHERWISE I'LL BE CRAZY!!!!!
rupesh baviskar said:
Hi
Plssssss Help me. i'm using HTC touch 3450 and i have upgraded my device with wm6.1
NOW THE PROBLEM IS...
1. MY DEVICE BUTTONS(HARD KEYS) NOT WORKING BUT I CAN MAKE THE DEVICE IN BOOTLOADER (TRICOLOR) MODE BY PRESSING CAMERA + POWER BUTTON.
2. AFTER INSTALLING A ROM WHENEVER MY DEVICE STARTS IT SHOWS THE HARD RESET SCREEN (BLACK SCREEN........... ALL THE DATA ...BLAH BLAB......)
I HAVE TO REMOVE THE BATTERY AND START THE DEVICE AFTER 30 MINS.) PLEASE NEED THE SOLUTION ......
3. I AM TRAYING THIS FOR A MONTH BUT NOTHING HAPPENS
PLZ GUYS HELP MEEEEEEEEEEEE OTHERWISE I'LL BE CRAZY!!!!!
Click to expand...
Click to collapse
hi
if u can get ur tricolor screen then try this
connect the usb cable to pc and see if u get the USB words on the phone tricolor screen if so good try flashing any official ROM the same happened to my phone long back did the above got my phone back asuming u have done HSPL for ur phone if u have not done that then the only way is to take it to service
hope it helps good luck
thanks
hari
Wrong forum.. Touch P3450 is not a touch 3g , its the original touch (ELF version)
but i will try and help as i have owned both.
if your hardware buttons are not working it could be possible that your send and end keys are stuck down as this key combo brings up the hard reset you are talking about.
think you are going to have to open it as it sounds like a hardware fault, and if you cannot get into bootloader you cannot flash
if it was working alright before this is not the case, but either way you will have to fix your camera button and get into bootloader

Categories

Resources