Hello,
Since a week or two I am the proud owner of the HTC Touch Cruise II. I was trying to 'fix' TomTom to make it cappable of using 'free' maps on the internet (With help of the EasyUseTool). The preinstalled TomTom didnt allow this so I used another version I found on the internet (uninstall the old and install the new). I got TomTom working with Western and Central europe map but then NaviPanel didnt load TomTom anymore. So I edited the registry to make it connected to TomTom again (http://forum.xda-developers.com/showthread.php?p=3519228). But when I push Navigator now it will freeze with the turing windows thingy. Anyone got a solution?
summary:
HTC Touch Cruise II
TomTom 7.915.9169
Preinstalled TomTom deleted replaced for other TomTom. NaviPanel links do not work anymore. Fix with register -> freeze.
Thanks in advance!
Hey hey,
anyone got an answer on my question? I searched all over the internet. Thanks in advance.
Grtz,
Roben
The NaviPanel works only with the branded (original) TomTom, with PaPaGo, with CoPilot and NaviTel. Other solutions of navsoft not works with NaviPanel. I think, your installed TomTom is different from the original branded TomTom, so will NaviPanel hangs up.
Solution:
Unlock the hardware Buttons (looks here) and set up the navigation-button with your version of TomTom.
Greetz Mirko
Hey,
Thanks for trying to help but it is not that my hardware buttons don't work. I can perfectly start TomTom by pushing the navigation button (above the green horn). It is just that NaviPanel does not work completly. Before I was able to push "To home" (naar huis), "Adress" (adres), "Recent location" (recente bestemming) and "Navigation" navigatie. When I use one of those buttons now it will be stuck with the turning windows logo (after I did the reg key edit, before it didnt do anything at all).
In order words, all the navigation buttons of the NaviPanel do not work. The rest does.
Thanks in advance!
You have 4 dll-files in the "Windos" - directory.
(NaviSWMiddle_CoPilot.dll
NaviSWMiddle_NaviTel.dll
NaviSWMiddle_PaPaGo.dll
NaviSWMiddle_TomTom.dll)
These 4 dll-files makes the start of the navisoft in navipanel. Isn´t a link, its the dll. NaviSWMiddle_TomTom.dll - in this time - works only with the original branded TomTom.
In registry you can set up four other Navsoft:
CoPilot
NaviTel
PaPaGo
TomTom
(all original branded)
Greetings Mirko
So it is actually waiting for a guru who can edit the .dll? I tried to open the dll with a reshacker but I wasnt able to (I didnt try real hard). Is anyone able to make this compatible?
Grtz
mirko.prinz said:
You have 4 dll-files in the "Windos" - directory.
(NaviSWMiddle_CoPilot.dll
NaviSWMiddle_NaviTel.dll
NaviSWMiddle_PaPaGo.dll
NaviSWMiddle_TomTom.dll)
These 4 dll-files makes the start of the navisoft in navipanel. Isn´t a link, its the dll. NaviSWMiddle_TomTom.dll - in this time - works only with the original branded TomTom.
In registry you can set up four other Navsoft:
CoPilot
NaviTel
PaPaGo
TomTom
(all original branded)
Greetings Mirko
Click to expand...
Click to collapse
Hi,
I accident add in name under shell\key\name, how is it possible to remove this new key, looking forward to your help. tq
utrecth said:
Hi,
I accident add in name under shell\key\name, how is it possible to remove this new key, looking forward to your help. tq
Click to expand...
Click to collapse
\HKLM\Software\HTC\NaviSW
is the path, the entry is "middlelayerDLL"
Greetings Mirko
Hi Mirko,
Thanks, I think you missuderstand my question, actually i am trying to add button 2 in
HKLM\software\shell\key. I add in a name there and string. I manage to delete the string but just cant manage to delete the name key.
I follow the other post to disable papago as default navigator in NaviSW. and bmomail ask to allocate button 2 to set as garmin xt. Problem start from there. Hope this is give you better picture.
Garmin XT isn´t able to set it on the NavPanel, because isn´t a dll for garmin on the Iolite. You need a specific dll like NaviSWMiddle_TomTom.dll for this. The dll is not editable with ressource editors.
The key, you will delete, try this with SK-Tools, this tool can delete entire regkeys. I hope, i has understand you now right.
Greetings!
Thanks for explanation. Does this mean if i am not using the papago, the navipanel hardware button will be useless for me?
utrecth said:
Thanks for explanation. Does this mean if i am not using the papago, the navipanel hardware button will be useless for me?
Click to expand...
Click to collapse
Yes, it is, the dll´s are only useable for the branded OEM-versions.
This topic is related:
http://forum.xda-developers.com/showthread.php?t=530034&page=2
So today I thought lets call HTC them self hoping they have got a solution. I called the service centre europe in the Netherlands. I explained that the phone freezes when starting up TomTom through navipanel. The guy was really trying to help but he had advices like "hard-reset the phone" and "install the original version". He also said that HTC worked together with company's like TomTom to test which PocketPC version is the best for the HTC Touch Cruise 09'. It does sound a bit like a cartel, doesn't it? You cant even choose your own navigation software because the phone doesn't support it. Actually it does support just a feature (=NaviPanel, the reason I bought the phone) doesn't. He advices to contact TomTom because HTC is not going to do anything about it. With other words... I am screwed untill some bright guy would like to do a favour for a lot of people ^^.
Related
I have flashed my device to Windows Mobile 6.1.
Then i installed TomTom and manually moved it to the storage Card.
My Problem is, that scrolling with the wheel on the left side of the device does not work.
If I'm in a textfield, scrolling up or down just generates the char '*'.
This is very annoying, if I try to handle the device one-handed.
Is this a configuration-issue which could be fixed?
regards,
Tobias
Does nobody have an idea for solving that problem.
I have recently upgraded to TomTom 7, but the problem remains :/
regards
Tobias
Twardon said:
Does nobody have an idea for solving that problem.
I have recently upgraded to TomTom 7, but the problem remains :/
regards
Tobias
Click to expand...
Click to collapse
Flash an other WM 6.1 perhaps 015 Tnyynt or something else.
Thanks for your answer.
This might fix the problem.
But as i've spent a lot of time finding the perfect image and customizing it - I don't want to re-configure everything...
Maybe someone else has a more spezific solution to the problem?
Check the configuration file in the touchflo folder (under device\programs).
If you edit it, probably you'll find tomtom.exe in the escluded programs.
Just delete the entry (only tomtom.exe).
regards
I don't mean the Touchflo Scrolling.
My Problem is scrolling with the jog-dial wheel on the left side of the device.
Touchflo scrolling in TomTom doesnt work anyway.
regards
Tobias
Problem solved.
It's a bug of tt7 7.450.9028 fixed in the new version of tomtom7 7.450.9030.
Search for it in the web and replace the tom tom navigator.exe file with the new one.
Perfectly working now on my Trinity
Blue version:
http://rapidshare.com/files/142143041/TT7.450.9030_PDA_qvga_blue.rar.html
Black version:
http://rapidshare.com/files/142267805/tomtom_navigator_7.450.9030.cab
jog dial wheel on Kaiser still doesn't work with 9030
donapalmas said:
Problem solved.
It's a bug of tt7 7.450.9028 fixed in the new version of tomtom7 7.450.9030.
Search for it in the web and replace the tom tom navigator.exe file with the new one.
Perfectly working now on my Trinity
Blue version:
http://rapidshare.com/files/142143041/TT7.450.9030_PDA_qvga_blue.rar.html
Black version:
http://rapidshare.com/files/142267805/tomtom_navigator_7.450.9030.cab
Click to expand...
Click to collapse
It seems the link is dead, anyway I've download tomtom7 7.450.9030 from elsewhere to try on my kaiser, but unfortunately, it doesn't solve the issue with the jog dial wheel of the kaiser. It still doesn't work with this new version. Instead, still used for volume
First a thank you for all the support I found here. Tried to install TomTom 7 on the X1 (legit) with ttn7.cab and TT..repack3, none worked. It starts to install but on the end it shows "unsuccessful". You can open TT, even download also "unsuccessful" a free map, what I do not need. The maps I have are all from TT6, but none is recognzed by TT7. Calling TT does not help they do not support TT7. TT home 2.5 does not see the X1. SE has no idea. I also talked to Navigon in Europe but there is yet not a WM 6.1 compatible version available. Just want my navigation back and working. Can anyone direct me to get it done?
are you using a qvga or vga version of the cab file? i have tomtom7 installed very easy on my x1 and works perfect
also tt7 doesnt support tt6 maps as far as im aware,but tt7 maps everything installed really easy on wm6.1
if you need more help let me know
is it a new purchase? have you had it on a phone before?
patterns said:
are you using a qvga or vga version of the cab file? i have tomtom7 installed very easy on my x1 and works perfect
also tt7 doesnt support tt6 maps as far as im aware,but tt7 maps everything installed really easy on wm6.1
if you need more help let me know
is it a new purchase? have you had it on a phone before?
Click to expand...
Click to collapse
Don't mean to hijack your thread but.....
I would like to purchase the UK & Western Europe maps but not certain which ones to buy (Tom Tom site does not list X1) also I cannot get TT Home to recognize the X1 so not sure if I can install the maps even if got them.
Anyone done this yet?
I bought mine for cruise/diamond and it works fine
Thanks - how did you install it? Was it via TT Home or just download from tomtom.com to PC and manually transfer?
Thanks
1) Use the old TT Home version - 1.5 - this will work !
2) TT 7 works with 6.75 maps - earlier versions not !
Thanks Peter.
I have tried to find TT 1.5 but no luck so far. Any ideas?
Just Google TomTom 1.5 and you will find it - if not leave me a message and I email you the file
Hi Peter, will try what you say to get it done. I used TomTom before on my Ipaq. I must change the "device" in TomTom Home- how? Where can I find on my maps which version they are, they are paid and downloaded. Which version of TT7 are you using? Would be greatif you could help out, thanks anyway
Hey guys,
first post on this, what seems to be a great forum.
I recently bought the Jade and overall i'm very pleased with it.
Today I had some time to install gps software. I picked TomTom 7.450 because i like it more than Igo. The program itself is installed well but i just can't get the receiver activated.
I allready used several settings (disabled agps, 'built-in gps' or 'other nmea receiver' in tomtom, also with different baud rates) but it keeps saying i have a bad reception, it's waiting for a useable signal and it doesn't find any satellites.
I already installe the cab file i found here: http://forum.xda-developers.com/showpost.php?p=3031549&postcount=5 but that also doesn't seem to help anything.
Would someone be willing to give a step by step guide in how to get this thing fixed?
Secondly, can someone tell me what setting I should use in orde to still see the 'start button' when i'm using TomTom. With my last pda it remained there when TomTom was activated, so I could also use other programs but with the Jade i can't seem to find how to do this.
Sorry if there are some grammatical errors in this post, I'm from Belgium . Thanks in advance!
update:
i managed to get some signal and got a fix, but after about a minute it was lost again and it won't find it again.
Also I installed IgO8 but it won't start on my jade so I guess I'll have to do it with TomTom...
OK, let's try to find where is the problem .
First chceck your registry. Find out what is your settings in this path:
HKEY_LOCAL_MACHINE/Software/HTC/SUPL AGPS
Set GPSMode to 1
Set EnableAGPS to 0
If you already installed that CAB, it should be like this. This is going to make your GPS fix slower but more accurate and reliable (or it seems to do that ).
Second, download and install GPS Tuner from http://www.gpstuner.com/ . This is a great GPS software for offroad navigation which I use when testing GPS recievers.
Do not allow it to set your GPS receiver automatically. Set your GPS in GPS Tuner to COM 4, baud rate 4800 and Type 1. Go to "GPS Panel" and click green button "Start GPS". Do not leave this tab, because you can see how your receiver is getting fix. Be patient, especially if you do not have a good view of sky. The reason why I use this to test GPS is that you can see satelite signal even if you do not have a fix. Not all GPS applications do that.
If GPS Tuner is able to get fix in some time, there is something wrong with your TT settings. If it is not, there is something wrong with your GPS receiver or registry settings.
In the gps panel tab, the following results were given after pressing start gps (after about 2-3mins):
Lateral and longitudinal positions, altitude were correct
PDOP: 3,7 (good)
Fix: 3d fix
Furthermore it found 16 sats from which 7 were active.
So i presume it's not the gps unit itself but the TT settings? Registry settings are ok i think.
Many thanks allready!
Use latest version of TT
Try to install the latest version (v7.9) of TomTom. This one works ok on the Jade and you can also use the latest maps.
jgeerts said:
Try to install the latest version (v7.9) of TomTom. This one works ok on the Jade and you can also use the latest maps.
Click to expand...
Click to collapse
Right! And normaly there is no need to change any gps settings...
I just installed the latest TomTom and everything works fine.
Hey,
i got the 7.450 version to work and it's working brilliantly. Thanks for the link to the 7.9 version Jgeerts, but i'm going to stick with the 7.450 version now it's working .
Heb trouwens even even op je link rondgesnuffeld en de flitspalen zullen erg goed van pas komen! Waarvoor dank natuurlijk.
TT version 7.9 versus v7.4
rubain013 said:
Hey,
i got the 7.450 version to work and it's working brilliantly. Thanks for the link to the 7.9 version Jgeerts, but i'm going to stick with the 7.450 version now it's working .
Heb trouwens even even op je link rondgesnuffeld en de flitspalen zullen erg goed van pas komen! Waarvoor dank natuurlijk.
Click to expand...
Click to collapse
Yes, but version 7.9 gives correct status for the sattelite reception and it also supports the latest v8.15 (and higher) maps. Version 7.450 does not support the v8 maps.
To be very honest. The file you linked me to (http://www.4shared.com/account/dir/8910078/74070269/sharing.html) gives me an ttsystem file after unpacking without an extension (no .cab, no .exe) and i actually don't have a clue how to use it
edit:
ok, got it to work, i installed the TomTom_7.910.9185 QVGA Black. I hope this one's ok?
Correct version.
rubain013 said:
To be very honest. The file you linked me to (http://www.4shared.com/account/dir/8910078/74070269/sharing.html) gives me an ttsystem file after unpacking without an extension (no .cab, no .exe) and i actually don't have a clue how to use it
edit:
ok, got it to work, i installed the TomTom_7.910.9185 QVGA Black. I hope this one's ok?
Click to expand...
Click to collapse
Yep, that's the one you need.
rubain013 said:
To be very honest. The file you linked me to (http://www.4shared.com/account/dir/8910078/74070269/sharing.html) gives me an ttsystem file after unpacking without an extension (no .cab, no .exe) and i actually don't have a clue how to use it
edit:
ok, got it to work, i installed the TomTom_7.910.9185 QVGA Black. I hope this one's ok?
Click to expand...
Click to collapse
hi i have the same problem i can not install the tt file 7.9 what must i do
help needit
Hello, i have the version 7.450, no install possible. How you got the version work?
jgeerts said:
Yep, that's the one you need.
Click to expand...
Click to collapse
@ jgeerts -- thanks very much for linking it. Is it the exe file in the 'tomtom pda' folder that I should download? (TomTom Navigator 7.910.9185 qvga black.exe)? Or is it TTN_7.910.9185_Cracked.rar?
jgeerts said:
Try to install the latest version (v7.9) of TomTom. This one works ok on the Jade and you can also use the latest maps.
Click to expand...
Click to collapse
Tried it on Touch3G, with v7 maps and it's all working now!
Also tried new version and your v8 maps on diamond and also working like a charm! Thanks!
jgeerts said:
Yes, but version 7.9 gives correct status for the sattelite reception and it also supports the latest v8.15 (and higher) maps. Version 7.450 does not support the v8 maps.
Click to expand...
Click to collapse
Wrong, I'am using 7.450 and v8.15 maps, works perfect!!!
To use v8 maps on TT7.450 use keygen v7
To use v8 maps on TT7.910 use keygen v8
That's all ;-)
hengst said:
hi i have the same problem i can not install the tt file 7.9 what must i do
help needit
Click to expand...
Click to collapse
I also have TTN_7.910 9185 QVGA Black.cab and when i trie to install it on my HTC Touch 3G NL i'am getting a errormessage: Installation of TTN_7.910 9185 QVGA Black.cab failed.
This file is okay, i had it installed on my HP iPaq hx2110 with WM5.
Anyone any idea?
TTN7.910 works now, read below how i managed it:
It allready had TTN_7.450.9028 VGA.cab installed on my HTC Touch 3G NL, although the Touch 3G is a QVGA device it worked (some textlines are to big for the screen).
On this thread i found following link: (http://www.4shared.com/account/dir/8...9/sharing.html).
There you can find: TT7_v7.910.9185_vga_via_update_van_7450.9028.rar in the tomtom pda folder.
In this download you wil find TomTom_7.450.9028.cab and 2 versions of TT7_v7.910.9185, black and blue incl. data.chk
After installing TomTom_7.450.9028.cab (or in my case TTN_7.450.9028 VGA.cab) all you have to do is copy the preffered version, black or blue of TomTom Navigator.exe and Data.chk to your device: in the folder (phone or storage memory)\Programmabestanden\Navigator.
Since i have a Dutch device the folder is called Programmabestanden, i don't know how it's called in English.
On my device there is also a folder Program Files, where in my case TT is not installed.
But i think most of you can figure it out yourselfs by know how it works, otherwise your not worthy a PDA.
With TTN 7.450 my HTC could find satellites but it was unable to show me how many it found. GPS receiption was good although. With A-GPS turned OFF.
With TTN 7.910 the problem above is solved, my HTC stil finds satellites and now i can see how many of them there are out there in the sky.
Another nice thing is that now although i installed VGA TT7.450 and replaced it with VGA TT7.910 i can read all text on the screen.
The text is smaller so it fits the screen but still very good readable.
Sincelry,
a big fan of TomTom.
Final solution to this problem !
Disabling AGPS is the cause of the issue we have here.
I've done some testing with AGPS enabled and GPSMode set to 1 and the results are good (quick fix and almost no lag).
Please read my reply on another topic http://forum.xda-developers.com/showpost.php?p=3143383&postcount=17
A cab is attached to it to make the registry changes.
Kind regards.
boring GPS fix lag...
I wonder if all Jade owners are happy w/ their GPS performance..
Despite experiencing many tweaks, it still lags too much..
Any suggestion from the guys are happy w/ it..??
sas_sas said:
I wonder if all Jade owners are happy w/ their GPS performance..
Despite experiencing many tweaks, it still lags too much..
Any suggestion from the guys are happy w/ it..??
Click to expand...
Click to collapse
I am quite happy with my GPS performance. However i am using Garmin XT. There is lag, of course but probably by a few ms (a few feet) but it does not make me miss a turn or a junction.
jgeerts said:
Yes, but version 7.9 gives correct status for the sattelite reception and it also supports the latest v8.15 (and higher) maps. Version 7.450 does not support the v8 maps.
Click to expand...
Click to collapse
Wrong, 7.450 does support v8.15 maps, but only with keygen v7. don't ask me why, the answer is: because!
7.910 needs keygen v8 for v8.15 maps.
Hi all,
I have been using TOMTOM 7 so far which works well on my Iolite. I saw iGO8 working and it looked quite good, so attempted to install it on mine too. After installation, I have been trying to get it working since yesterday
The installation is always successful. But when I try to launch the application, the curser changes as if the phone is doing something / about to launch the application, but then nothing happens.
I dug out other threads which are about other phones having trouble with iGO8 but did not find a thread about Iolite.
Has any one tried to install iGO on their Iolite / XDA Guide / Touch cruise 09 so far (successfully or unsuccessfully) ??
I would be very grateful if I can get help on this issue please
gamezbond said:
Hi all,
I have been using TOMTOM 7 so far which works well on my Iolite. I saw iGO8 working and it looked quite good, so attempted to install it on mine too. After installation, I have been trying to get it working since yesterday
The installation is always successful. But when I try to launch the application, the curser changes as if the phone is doing something / about to launch the application, but then nothing happens.
I dug out other threads which are about other phones having trouble with iGO8 but did not find a thread about Iolite.
Has any one tried to install iGO on their Iolite / XDA Guide / Touch cruise 09 so far (successfully or unsuccessfully) ??
I would be very grateful if I can get help on this issue please
Click to expand...
Click to collapse
Try this: edit your sys.txt and compare.
My sys.txt:
[project]
name="igo8_pda"
[folders]
app="%SDCARD%/iGO8"
[interface]
maxzoom2d=6000000
show_exit=1
remember, you have 2 sys.txt, on the SD-Card in "IGO8", and in "\Programs\IGO8". booth must be the same.
Greetings!
Many thanks mirko.prinz,
I will try that.
Is that from an Iolite or a different phone?
I've noticed that Iolite is not in the supported list on iGO website but iGO actually looked so good that I am still determined to get it working.
I will report how it goes later.
Thanks
My current sys.txt says:
[folders]
app="%SDCARD%/iGO8"
[interface]
maxzoom2d=6000000
show_exit=1
I am about to try your version and will let you know how it goes.
OK, I tried that, still the same. Seems as if its about to do something, and then nothing
Anything else I should try ?
Many thanks for your help.
gamezbond said:
OK, I tried that, still the same. Seems as if its about to do something, and then nothing
Anything else I should try ?
Many thanks for your help.
Click to expand...
Click to collapse
Maybe, you have the wrong version? They are PDA and PNA-Versions. What you was buying? What is the version-number?
Mine is iGO 8. Or do you need the exact version number like 8.0.0.335 etc ?
I can check the exact version when I get home, unless you know how to check it in my phone? I have the iGO8 directory and the included files in my phone and can check it now if you can tel lme where to check please?
Thanks.
On the phone only, when it runs. Look at home. Maybe, some versions not running on iolite. My version is 8.3.2.97313 They makes trouble with EZInput 2.1 (makes self many characters "Ä" in the input-line)
OK, try this: backup your IGO-files, then change data.zip and branding.zip from here
http://www.4shared.com/file/153951601/9e4f5553/BRANDING.html
http://www.4shared.com/file/153952106/17d1799b/DATA.html
When it not helps, uninstall IGO, take the files from the unpacked IGO8-fix.zip,
(http://www.4shared.com/file/153952792/c5f37a79/IGO8-fix.html)
put it in your folder named iGO8 of the SD-Card and then reinstall it (autorun from the folder 2577)
Don´t forget, backup your files befor!
Greetings!
Thanks, I wil ltry these fixes when I get home this eve and will report back.
regards,
GB
Last night I started to try the changes but got side tracked by the following circumstances !
Firstly I thought I should check the version I have been trying on my Wife’s phone (XDA Orbit 2 / Polaris). So I installed the program, and then added the maps etc. Started the program and it worked flawlessly.
Now the wife was happy and that means I was too. Apart from that I knew that the installation and the maps etc itself have no problems. So it must be that this iGO is just not compatible with Iolite.
Then, I thought I will re-install the program clean, before trying your changes. But this time I tried a different version which is iGo 8.3.4.102680 .
Seems like this is quite different from the other iGO8 version I was trying previously. Unfortunately I never got that version to ever start or even display the splash screen so I don’t know exactly what version it was.
But after installing iGo 8.3.4.102680 on my Iolite, I was nicely surprised when the program actually displayed the initial splash `screen ( as this is the first time I have seen it working on an Iolite). I waited and the program actually started
The problem is, that because I had the old maps from the other version, iGO says that the maps are out of date and need updating.
So for the benefit of others, at least now we (Iolite owners) know that version 8.3.4.102680 definitely works on Iolites (even though the iGO website does not include Iolite in the supported devices).
Unfortunately I don’t have the maps for iGO 8.3.4.102680
mirko.prinz.... If no other development tonight, I will re-install the old version tonight and go through your fixes you mentioned above. Sorri didn’t get a chance last night due to seeing (some) light at the end of a (different) tunnel if you know what I mean
So now I have two versions, one with maps (that doesn’t work on Iolite) and one that works with Iolite (but doesn’t have the maps) !!
So I would be very grateful if someone here could donate the UK maps for testing this version pleeeeez ??????
Unless someone also knows how to use the old maps with the new iGO versions?
When you a little bit understand german, you should look at here
Greetings!
gamezbond said:
Last night I started to try the changes but got side tracked by the following circumstances !
Firstly I thought I should check the version I have been trying on my Wife’s phone (XDA Orbit 2 / Polaris). So I installed the program, and then added the maps etc. Started the program and it worked flawlessly.
Now the wife was happy and that means I was too. Apart from that I knew that the installation and the maps etc itself have no problems. So it must be that this iGO is just not compatible with Iolite.
Then, I thought I will re-install the program clean, before trying your changes. But this time I tried a different version which is iGo 8.3.4.102680 .
Seems like this is quite different from the other iGO8 version I was trying previously. Unfortunately I never got that version to ever start or even display the splash screen so I don’t know exactly what version it was.
But after installing iGo 8.3.4.102680 on my Iolite, I was nicely surprised when the program actually displayed the initial splash `screen ( as this is the first time I have seen it working on an Iolite). I waited and the program actually started
The problem is, that because I had the old maps from the other version, iGO says that the maps are out of date and need updating.
So for the benefit of others, at least now we (Iolite owners) know that version 8.3.4.102680 definitely works on Iolites (even though the iGO website does not include Iolite in the supported devices).
Unfortunately I don’t have the maps for iGO 8.3.4.102680
mirko.prinz.... If no other development tonight, I will re-install the old version tonight and go through your fixes you mentioned above. Sorri didn’t get a chance last night due to seeing (some) light at the end of a (different) tunnel if you know what I mean
So now I have two versions, one with maps (that doesn’t work on Iolite) and one that works with Iolite (but doesn’t have the maps) !!
So I would be very grateful if someone here could donate the UK maps for testing this version pleeeeez ??????
Unless someone also knows how to use the old maps with the new iGO versions?
Click to expand...
Click to collapse
http://www.rapidspread.com/file.jsp?id=6ixndwsrsu
http://www.rapidspread.com/file.jsp?id=yx02icf0lq
Many thanks mirko.prinz and stdk,
I will check out all your links tonight and will report on how it goes.
Regards,
GB
Hi mirko.prinz and stdk,
Once again thanks for the files and solutions.
I installed the maps to test, and turns out that some how the maps I have are not compatible. After installing the UK maps from stdk (thanks again) the country changed from HUNGARY to the UK (initially I could only see Hungary with my own maps and thats how far it got before I replaced the maps with the above given links).
So finally its all wrking. Thanks to both of you, hopefully I wont get lost again
Next step will be to find out how to back up my own original ROM, so I can test some of the better ones from here
Thank you.
GB
keyboard problem
Dear all,
You are all treating the issue of "Ä" typing characters as you have a workaround for that. I've tried changing the keyboard to the default keyboard of Win 6.1 and had the surprise of being capable of introducing street name, country etc, but when I got back into writing emails I had the ezinput 2.1 keyboard again as default. Opened Igo and started having the same problems with the "Ä" character.
Any other workaround? It's hard to get into registry and change the keyboard each time you want to use Igo instead of SMS or emails, not to mention is not ergonomically to have to switch from one keyboard to another. Is there any other keyboard which works ok both with Igo and any other applications in which occurs writing?
Thanks,
Alex
mirko.prinz said:
On the phone only, when it runs. Look at home. Maybe, some versions not running on iolite. My version is 8.3.2.97313 They makes trouble with EZInput 2.1 (makes self many characters "Ä" in the input-line)
Click to expand...
Click to collapse
I think, I was reading anywhere about a programm, that changes input-methods. It is a while ago. Must use google.
Greetings!
alexman1982 said:
Dear all,
You are all treating the issue of "Ä" typing characters as you have a workaround for that. I've tried changing the keyboard to the default keyboard of Win 6.1 and had the surprise of being capable of introducing street name, country etc, but when I got back into writing emails I had the ezinput 2.1 keyboard again as default. Opened Igo and started having the same problems with the "Ä" character.
Any other workaround? It's hard to get into registry and change the keyboard each time you want to use Igo instead of SMS or emails, not to mention is not ergonomically to have to switch from one keyboard to another. Is there any other keyboard which works ok both with Igo and any other applications in which occurs writing?
Thanks,
Alex
Click to expand...
Click to collapse
You can try fingerkeyboard 2.1, i find it a good compromise. It works in igo 8, and is finger friendly...
But ezinput still keeps resetting itself as default!
Blubster said:
You can try fingerkeyboard 2.1, i find it a good compromise. It works in igo 8, and is finger friendly...
But ezinput still keeps resetting itself as default!
Click to expand...
Click to collapse
That U can change with SKTOOLS.
Greetings!
Sorry if this has been covered elsewhere, but I couldn't dig it out.
I have fully licensed Navigator 6 software, and TT has promised be a new activation code after I have transferred to my HD2 from my TyTn II.
I can get the TT6 cabs onto my HD2 and get the HD2 recognized by TT Home 1.5. But when TT installs, it throws up a configuration screen that is obviously in the wrong screen resolution and conflicts with the HTC operating system overlay.
Can anyone offer an work around, since I see that some have obviously overcome the problem already?
Stephen
My researches continue. It seems no-one has ever successfully run TTN6 on the HD2. It would in theory be possible if the apps to lower the screen resolution would work with WM 6.5; but they don't
Meanwhile TomTom has discontinued sale of TTN7 Windows, although it remains available for the iPhone.
S
Stephen Selby said:
My researches continue. It seems no-one has ever successfully run TTN6 on the HD2. S
Click to expand...
Click to collapse
sorry mate if you are referring to tomtom version 6.000, i have it on my HD2 nd it is working perfectly, i had it on my HTC Diamond and Diamond2. I have it installed on my sd card
Is the screen resolution ok? I can't get the set-up screen in the correct resolution after firing up the cab and installing successfully off the SD card. Did you just put the old SD card from the Diamond 2 into the HD2?
Stephen Selby said:
Is the screen resolution ok? I can't get the set-up screen in the correct resolution after firing up the cab and installing successfully off the SD card. Did you just put the old SD card from the Diamond 2 into the HD2?
Click to expand...
Click to collapse
all working good...did not have to do anything...just installed the cab on the sd card and opened the application and located the maps et voila
NB: I used the same micro sd that i used to have in my Diamond 2 and the cab was on it
you have a private message...check it out
Stephen, I have exactly the same problem. If you get this to work please let me know how
Thanks
gdayhtc was able to resolve the problem for me. It is obviously a question of some cabs working and some not. The cabs on my TomTom DVD did not. I have tested TT6 today: it worked fine. Will go to landscape when the HD2 is tilted (after a tweak) and does not interfere with bluetooth.
Could you post the cab you are using now?
Please pass your request to ericjennings.
Hi, i am also having the same issue, can i share the same request? thanks.
tom tom navigator 6
I've noticed that it only works if you run it if your system in landscape mode before you launch the program. it wont run in portrait mode.
ImperfectTreo said:
Hi, i am also having the same issue, can i share the same request? thanks.
Click to expand...
Click to collapse
I am also in same boat, can someone pls share the working cab?
Thanks.
Same issue here.
gdayhtc. I understand you have the cab that will work. I would greatly appreciate it if you could send it to me. Thanks in advanced.
AC
Obsolete
Hello, I see you have found a way to get TomTom 6 to work with WM 6.5. I'd like to get it to run properly on my lg expo. It runs in landscape with the keyboard out but I have 3 panels side by side of the same screen. Forget about it in portrait—the screen is a garbled and smushed at the top of the lg screen. I've tried both cabs ttn.cab & ttn2003.cab found on my original dvd. Please help. Thanks
Philip S.
TTN 6 CAB file
Hi,
i cant see any links for the Tomtom Navigator 6 cab file so im assuming its being sent directly to folks.
i have lost my sd card i used on my qtek 9100 but still have the box including my product code for the ttn6. could anyone help me out by telling me where i will find a working cab file for ttn 6?
Many thanks in advance.
i have a gps tomtom v6 , cracked ***Mod Edit - Read and understand this link if you want to continue to post on XDA..http://forum.xda-developers.com/announcement.php?a=81)
You need to install WVGAFIX4 in your window mobile 6.5 device. Check out the forum http://forum.xda-developers.com/showthread.php?t=455974 .
Once installed then install the TTN 6 as normal BUT run the WVGAFIX4 before running the TTN 6 in your mobile.