Database Users

Removing eten dialer skin

Im having a problem with the eten dialer skin freezing my picture album. So i'm curious as how i can go about uninstalling it without hard resetting, while getting all orignal functions back. I would greatly appreciate replies. This is starting to get a tad bit annoying.

hey mate, sorry to hear you're having issues with it.
assuming you installed this via activesync or a cab file....what you do is go to your settings->system->remove programs and uninstall the dialer. once done do a soft reset and the original dialer should appear.
hope that helps
rob

i had that problem but i dont know if it was because of the eten dialer. i actually love the eten dialer. just had to remember not use the phone when in landscape mode. ha. hard reset it and then add it again. it should work for you. i have an 8125 so maybe it can be the software bro.

Updated: Combo HTC 3G Dialer and SmartDial (3 April 2009)

Have you been getting frustrated with some of the dialers that after you install, either the screen will look funny (see first picture) or smartdial menu is not appearing?
Well, after many testing, I have managed to find the solution to make it work. The skins I used for this 3G combo dialer comes from bluemetalaxe and sakajati. Special thanks to both of them for their skins.
I only have a Kaiser, so not too sure if it will work for other phones. Do let me know if it works for other phones. Note that the new skins is only for portrait, not landscape. For landscape, it is the default from HTC. Hopefully, I can get some skins for landscape to add into the cabs.
Enjoy:
Steps to make it work:
1. SR your device.
2. Use a registry editor to delete the following registry. Note that some of the registry keys cannot be deleted the first time round, so after you have finished the list, do a SR and repeat the deleting of registry keys.
3. Do another SR and install the smartdial cab. Next install the 3G dialer cab.
4. Copy the white background video buttons from this link (http://forum.xda-developers.com/showpost.php?p=3486541&postcount=36) to \Windows. (New screen capture had been added).
5. SR and you should have a working 3G dialer.
Registry Keys List:
HKCU:
HKCU\ControlPanel\Phone
HKCU\ControlPanel\Sounds\VTAlerting
HKLM:
HKLM\Security\Phone
HKLM\Security\ResOver
HKLM\Software\HTC\3GVTEngine
HKLM\Software\HTC\ConcurrenceMgr
HKLM\Software\HTC\HTCSDKVTCodec
HKLM\Software\HTC\Phone
HKLM\Software\HTC\PhoneCanvas
HKLM\Software\HTC\SmartDialing
HKLM\Software\Microsoft\DialParser
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\AppView
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Contacts
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Phone
HKLM\OEM\MASD\Phone_Canvas
HKLM\OEM\MASD\VideoTelephony
HKLM\OEM\MASD\Smartdialing

Reserved for future needs

great work look nice
congratulation for your dialer

great work, i've been searching for this for long timee.. thx dude

I Like you dialer
SmartDialer work fine
I didn't have 3g connection right now, so I don't know it's work or not.
I didn't edit any registry because it's say cannot access.
so, I try to install smartdialer first and then 3G dialer.
It's have a some error on installing 3G dialer. It's say you have to remove SmartDialer version first.
I accept and again error tell me that cannot remove SmartDialer version.
Anyway, after that error it can continue install 3G dialer and finish. SR again.
Now, It's work fine and look nice.
Thanks for your work.
My Phone is Dopod 810 or Trinity

nice work but don t work on my ks20 wm6
The dialer didn t wanted to be installed the cab doesn t work

it ALMOST works perfectly on my polaris. has a few tiny visual bugs.. including one with which i can't see the smart dialing numbers. but everything works.. in general.
great work.

bigsilly said:
I Like you dialer
SmartDialer work fine
I didn't have 3g connection right now, so I don't know it's work or not.
I didn't edit any registry because it's say cannot access.
so, I try to install smartdialer first and then 3G dialer.
It's have a some error on installing 3G dialer. It's say you have to remove SmartDialer version first.
I accept and again error tell me that cannot remove SmartDialer version.
Anyway, after that error it can continue install 3G dialer and finish. SR again.
Now, It's work fine and look nice.
View attachment 112863
Thanks for your work.
My Phone is Dopod 810 or Trinity
Click to expand...
Click to collapse
Glad it works for you and thanks for using it.

nir36 said:
it ALMOST works perfectly on my polaris. has a few tiny visual bugs.. including one with which i can't see the smart dialing numbers. but everything works.. in general.
great work.
Click to expand...
Click to collapse
Glad it works almost perfect for you and thanks for using it.

thorfr said:
nice work but don t work on my ks20 wm6
The dialer didn t wanted to be installed the cab doesn t work
Click to expand...
Click to collapse
Thanks for the feedback that it won't work for ks20.

great dialer! works perfect on my hermes with WM6.1 V24 from Dvha79_ddt! i had only to install the two cab, no problems for now, i can do videocall and using smart dialing.... i'm glad to have found your dialer, is one of the best i've ever seen on my device thanks again!

mimmo_kallon said:
great dialer! works perfect on my hermes with WM6.1 V24 from Dvha79_ddt! i had only to install the two cab, no problems for now, i can do videocall and using smart dialing.... i'm glad to have found your dialer, is one of the best i've ever seen on my device thanks again!
Click to expand...
Click to collapse
Glad it works for you too! Thanks for the feedback.

I tryed it but video call dont work on my Trinity with French Rom (Netdrg 3.5L)
Apprearence is OK except in the "menu" which shows some trouble. I think it's due to smartdialling.dll.0409.mui and phcanrc.dll.0409.mui that are in english (0409) and not in French (040C).
Any Idea ?

Francois57 said:
I tryed it but video call dont work on my Trinity with French Rom (Netdrg 3.5L)
Apprearence is OK except in the "menu" which shows some trouble. I think it's due to smartdialling.dll.0409.mui and phcanrc.dll.0409.mui that are in english (0409) and not in French (040C).
Any Idea ?
Click to expand...
Click to collapse
Sorry, not too sure but if you think it is due to the two files, and if you have the right French files, pm me and let me know. I can change the two files for you and make a new cab.

Thank you for the proposal. I need first to find the 2 files.

zard said:
Have you been getting frustrated with some of the dialers that after you install, either the screen will look funny (see first picture) or smartdial menu is not appearing?
Well, after many testing, I have managed to find the solution to make it work. The skins I used for this 3G combo dialer comes from bluemetalaxe and sakajati. Special thanks to both of them for their skins.
I only have a Kaiser, so not too sure if it will work for other phones. Do let me know if it works for other phones. Note that the new skins is only for portrait, not landscape. For landscape, it is the default from HTC. Hopefully, I can get some skins for landscape to add into the cabs.
Enjoy:
Steps to make it work:
1. SR your device.
2. Use a registry editor to delete the following registry. Note that some of the registry keys cannot be deleted the first time round, so after you have finished the list, do a SR and repeat the deleting of registry keys.
3. Do another SR and install the smartdial cab. Next install the 3G dialer cab. SR and you should have a working 3G dialer.
Registry Keys List:
HKCU:
HKCU\ControlPanel\Phone
HKCU\ControlPanel\Sounds\VTAlerting
HKLM:
HKLM\Security\Phone
HKLM\Security\ResOver
HKLM\Software\HTC\3GVTEngine
HKLM\Software\HTC\ConcurrenceMgr
HKLM\Software\HTC\HTCSDKVTCodec
HKLM\Software\HTC\Phone
HKLM\Software\HTC\PhoneCanvas
HKLM\Software\HTC\SmartDialing
HKLM\Software\Microsoft\DialParser
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\AppView
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Contacts
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Phone
HKLM\OEM\MASD\Phone_Canvas
HKLM\OEM\MASD\VideoTelephony
HKLM\OEM\MASD\Smartdialing
Click to expand...
Click to collapse
congratulation to your work, looks fine.
i did install your dialer in my rom - no troubles .. but now everytime i switch it on, the dialer starts itself. if i switch the phone on from standby and also when i do a softreset
any ideas? i didn't cook it in yet, but i will do so tomorrow or so..

nosedive said:
congratulation to your work, looks fine.
i did install your dialer in my rom - no troubles .. but now everytime i switch it on, the dialer starts itself. if i switch the phone on from standby and also when i do a softreset
any ideas? i didn't cook it in yet, but i will do so tomorrow or so..
Click to expand...
Click to collapse
Did you follow the steps I mentioned to delete those registries in between SR?
I've not experienced what you had mentioned. Tried on many Kaiser roms and works all the time without the problems you highlighted.

zard said:
Did you follow the steps I mentioned to delete those registries in between SR?
I've not experienced what you had mentioned. Tried on many Kaiser roms and works all the time without the problems you highlighted.
Click to expand...
Click to collapse
yes i did ... i actually did remove the entries from my rgus from rom kitchen and did then cook it in, but still the same issue
i guess it has something to do with that reg-key HKLM\SOFTWARE\HTC\PHONE\NikeOptionOnOff .. i did set this to 0 and the phone did actually not dial after softreset - but still "auto-dial" when switching on from standby

I installed Smartdial and 3G dialer and everything works perfect without any problems.
The only thing that changed and didn't wanted it to, is that the icons on the taskbar have changed, even the battery icon.

kostas-k said:
I installed Smartdial and 3G dialer and everything works perfect without any problems.
The only thing that changed and didn't wanted it to, is that the icons on the taskbar have changed, even the battery icon.
Click to expand...
Click to collapse
Can you do a screen capture of the icons on the taskbar before and after you installed the dialer?
Thanks.

auto contact listing during sms

hihi,
recently installed a few apps and run into this problem.
before install apps, during NEW SMS, under TO:, i type the name of the recipient and the related listing will appear, (much like the contact search). however, after installing the apps, this function does not work.
anyone encounter the same prob? or could it be the update? i'm not exactly sure when the change happened.
i have
SK tools
HTC EZ Input T9
HTC Enlarge start menu
sony ericsson facebook panel
clifford's XperiaTweak
Zenyee X1i Youtube
Mole Youtube
SE growing panel
smaberg power button X1 12 icons
S2U2
S2v
anyone??
TIA!!

i´m not sure but i think this problem is coursed through the htc t9...
i had the same problem by installing the virtual htc tastatur
just find out by deinstalling which app is the bad one

man i removed htc t9 but problem still persist. a little time consuming to remove everything and try again. but maybe i'll try when i have the time.
thanks anyway.

I have the same problem since installing htc dialer. So I think this is the problem.

i find it comes up when using the on screen keyboards, rather than the hardware keyword.

it doesn't work with onscreen keyboard for mine.
i just realise how good the HTC Enlarge start menu is. cause the stuff is kinda small now.
i'll update you guys what causes the prob. i'm removing all stuff now.

i went to do a hard reset and install one app after another and check. finally got the answer. it is the HTC EZ Input T9 !!!

gothicia said:
hihi,
recently installed a few apps and run into this problem.
before install apps, during NEW SMS, under TO:, i type the name of the recipient and the related listing will appear, (much like the contact search). however, after installing the apps, this function does not work.
Click to expand...
Click to collapse
Just press-in the optical touch pad, under TO:, and it takes you to you're contacts.

yeah. but i don't want to scroll for the contacts. i don't like that method.
thanks anyway. but problem solved! very happy now.

Uninstalling HTC Dialer or whatever it is

Hello! I'm using Inesoft Dialer & Stuff on my phone. However, it would appear that it's just a kinf of overlay for the original software on the X1. When I miss calls it ****s up and I get multiple screens, the old call list flashes up for a short moment. How can I fully uninstall that old Dialer? Will it interfere with CommManager?

I couldn't uninstall HTC Dialer .. but it's some time ago. It simply didn't remove all the files. Hard reset is only solution I know.

Dr.Sid said:
I couldn't uninstall HTC Dialer .. but it's some time ago. It simply didn't remove all the files. Hard reset is only solution I know.
Click to expand...
Click to collapse
Hardreset gets you back to the defaults including the default dialer. Did you manage with Hardreset? If so, explain.

Oh I see .. by HTC dialer you mean original Xperia dialer ? I understood you mean dialer from TouchFlo (which is in fact very very similar).
No idea then. Sorry.

Dr.Sid said:
Oh I see .. by HTC dialer you mean original Xperia dialer ? I understood you mean dialer from TouchFlo (which is in fact very very similar).
No idea then. Sorry.
Click to expand...
Click to collapse
Yes I mean the original dialer. I think it's HTC? Anyway I need to get rid of it...

how to switch from htc dialer to ms or another one?

hello to everybody.
I am experiencing a big slowdown using htc dialer: sometimes it freezes, sometimes the buttons are not functioning even if I press them...and of course when I am phoning...for example I have troubles in pressing the keypad softkey to use the dialer...or to turn on the speaker...
I use the rom in my signature and S2u2 2.34.... no special registry tweaks or strange apps... if I hard reset it works for some hours and after that it starts freezing... I read somewhere it is a know bug of htc dialer... How can I replace it? maybe with another app? using ms dialer? and in this case, how to switch to microsofts' one smoothly?
thanks in advance
all the best

http://www.iconsoft.com/?language=en&menu=62e094db10fc83b1

thanks for the tip.
but does it overwrite completely htc software for calls?

I installed inesoft phone trial software just to check...
I have the same issues, so for sure it is a problem related to WM.
Both htc dialer software and inesoft for sure use the same layer....
ahhhh, wtf....

I'm about 99% sure it has to be something specific to what 3rd party software you've installed, because on the same ROM, I didn't experience this, but I did not use S2u2, so if I had to guess, this would be my first place to look. Have you tried uninstalling S2u2 2.34?

yes, I do mtty everytime I flash, and I flashed so many times I stopped counting.
if this is real (3rd party software in conflict) it's a big problem...
which one? I always installed more or less the same software and if I start to check it manually well, I need 1 week...
thanks for the reply anyway.
I am trying S2u2 now... I will post here news

it seems not to be s2u2 or the colored taskbar I use...
I will try hard reset and then one apps at a time... but when I'll have time.
for now, I can live with it...
I am using hard key for ending call... keypad sometimes works, sometimes not...
uff...