Hi folks,
I'm aware of the registry hack to change the RingTone settings (such as vibrate length, etc), but can this be done for the notification alert? When I get a notification the phone just vibrates for too long.
Any help appreciated.
PaulB
Hi,
Any help on this would be most appreciated, as the vibrate just goes on too long, and not only annoys me but everyone in my (quiet) office!
You can set the vibrate length in seconds for RingTone0 in the registry so there must be an equivalent for the notification alert?
PaulB
i second this request, the whole scripting thing for ringtone0 is simple but bizarre especially as there seems to be no equivalent settings for text/email notifications. There must be a way!
Change duration of notification vibration (hey I'm a poet!)
Sorry to bump this again, but as some time has passed I wondered if anyone had managed to find the reg settings for the notification alert?
I really need to shorten the vibration duration for notifications.
I second this, the message alert is way to long. Hope someone have a sollution to this.
Jarle
Fix for long vibration
I recently switched from the Sidekick 3 (I had the sidekick 1, sidekick 1 color, and sidekick 2 as well) to the 8525/TyTN and immediately found this vibration issue described above extremely annoying. The sidekick uses the sound file normally played to generate the vibration pattern, meaning if the sound file has two large amplitude alerts 1 second apart, if the phone is in vibrate mode, it would vibrate twice, with a 1 second spacing.... along with "the beat" of the audio.
Anyways, I discovered today that Windows Mobile does this as well to some extent. If the phone is set to vibrate mode, then it seems that all notifications vibrate as the long, 5 second or so, vibrate that you're all familiar with. HOWEVER, if the notification is set to vibrate and sound acoustically, it vibrates for the duration of the sound file. Strangely, this does not work when the phone is set to only vibrate. To get around this, what you need to do is set your notification (text message, e-mail, whatever) to both play a short sound and vibrate, then set your phone's audio to be on, but then turn the volume all the way down. In this setting, the phone does not play a sound, but does vibrate according to the length of the audio file.
I haven't tested this extensively, but it seems to work so far. This actually was one of my biggest complaints about the phone and i'm very glad i've found a simple work-around.
Let me know your experiences and/or if it doesn't work for you,
Todd
quite a great idea there, but was hoping someone has figured out a better solution?
what about going one step further with this and make a short wav file of pulsed noise, but at 20kHz. you won't here it!
All,
I have just joined this board searching for a solution to EXACTLY this problem. What is required please is a registry tweak that shortens the vibration alert for text messages, etc, when the phone is set ot vibrate only.
The ringtone fix to shorten the vibration alert works when a call comes in but NOT when a message comes in.
Any help on this would be very much appreciated.
Thanks
WB
Oh wow. I have the same annoyance with my phone. You send a text on vibrate and it goes nuts for an hour! Not really that long, but for just a text message notification it should be a little 1 second bitz.
This long vibration is really bad when you are in class and it goes for so long. My phone hits right against those plastic chairs through my pocket and resonates though out the whole room.
Unfortunately the Notification registry entries don't have a script option.
If you go into
HKEY_CURRENT_USER\ControlPanel\Notifications
the Default String tells you what the each directory is for.
The other keys are
AvailableOptions - What options you can pick from in the Sound/Notifactions screen in settings,
Duration - the length of time the light flashes (5,10,15,20,30,45,60min, 0=no limit)
Options - what sort of notifications you want
1=play sound
2=vibrate
3=play sound, vibrate
4=flash light
5=play sound, flash light
6=flash light, vibrate
7=play sound, flash for, vibrate
8=nothing
9=play sound, display message
10=nothing (can only pick play sound and vibrate)
11=play sound, display message, vibrate
12=Display message, Flash light
13=play sound, display message, flash light
14=display message, flash light, vibrate
15=play sound, display message, flash light, vibrate
senergy said:
Unfortunately the Notification registry entries don't have a script option.
Click to expand...
Click to collapse
So what you are saying is there is no way of making the vibration shorter? No way at all? Could you add an option for time? Is there some program?
Senergy,
Many thanks for your response. Disappointing news as this is a serious nuisance.
I have lost count of the number of times I have been in meetings where the phone has gone off in vibrate mode only for the whole world to know I have had a message. Many a time I simply turn all alerts off which defeats the objective of having a discrete vibrate system.
I rang HTC's support team in the UK and got nowhere.
I wonder if a written query into them might get a more productive response?
WB
Anyone heard of any solutions yet? I've been searching google, forums, etc for days with no luck yet.
DRChrysler,
No but see thread link below. Shantz may yet be able to help us out here.
Cheers
WB
http://forum.xda-developers.com/showthread.php?t=311838
How can I change the alarm tone and whether it should vibrate or not? Previously had the wizard, and could have sworn that the function is in settings, sounds and notifications. But when I go there there is no alarm option in the drop down menu?! At the moment it's a loud, annoying t-mobile tone and it vibrates, which sounds awful first thing in the morning...
found it...
I had the same issue when I had a Tytn II last year.
My issue is that when the phone rings while in normal mode, it is one constant vibration, which I dont like.
Also when i receive a text message in normal mode, the vibration is constant and lasts for about 4 seconds.
BUT
when the phone is in vibrate mode, the vibration for calls is a on/off vibration which I like, and for texts is 3 sharp vibrations which is a lot more useful in distinguishing whether it is a phone call or text that i am receiving when the phone is in my pocket.
Is there anything I can do to make the HD behave the way it does in vibrate mode for all calls?
There must be some sort of registry setting that can be tweaked.
Thanks in advance for any replies..
anyone?
Try this, It could be what your looking for.
http://forum.xda-developers.com/showthread.php?t=437279&highlight=Valert
Would also be interested.
i remember back in the day, my Nokia 6310i (yeah not even color phone) would vibrate to the ring tone.
valert is cool, but on the HD has a bug that disables volume keys
I've installed VAlert but cant find it anywhere?
Try the attached utility. It's conf is under system settings.
nezz, the app has cyrillic interface: any chance to have it in latin (or at least a translation of what the 3 checkboxes mean?)
thanks
Is there a reg tweak for this? When you turn the phone on it does 2 short vibrations. i would like to use this as the sms vibrate alert. Is that possible?
Thanks!
Today I experienced a strange issue with my Leo. The ring volume autosets itself to silent. I manually increase it to max (both ring and system) using the volume keys but immediately after exiting the volume control window it sets itself to silent. I tried to set it to vibrate only but - same thing, it goes to silent again. The sound icon in the taskbar shows normal volume (i.e. not silent). When I receive a call it does not ring nor it vibrates. Its silent. The device plays music and sounds normally. I believe there must be a registry key that somehow was changed but I'm not sure which program might have caused that.
I use Phonegate call filtering app and Iconsoft PhoneX but cannot find anything in their settings that would cause it. Also tried removing them - no effect. Soft reset - many times
HR may be?
are you sure it is setting to silent? it could be that the chosen ringtone doesn't exist anymore? Try changing to a different ringtone and back again.
Tried that but still with no success
hmm, could it be that you have an appointment set, and the phone set to go silent during appointments?
Stupid me! In the windows sounds and notification settings, Notifications tab I found that for the Incoming call event the ring type was mysteriously changed to NONE when it should be set to RING. I don't know how could this happen by itself... But thank you, samsamuel for your logical suggestions and sorry for posting before thoroughly check my device.
hehe no worries, it generally turns out to be something simple.
I've searched for this functionality and not found any good way off doing it.
I leave my phone on loud at night so certain notifications will wake me in case of something important. To wake me some of these notifications are loud and extremely annoying. I would like for my phone to vibrate first, then have a delay of over 30 seconds before the notification tone. I would like the notification tone to not play if I use the phone between vibration and sound.
Can anyone point me in the direction of an app or mod and that would let me do this? Google has failed me so far.
I don't want to create sound files with 30 seconds of silence at the start as this requires me to mute my phone and then I may forget to turn the volume up again.