Database Users

Case for the Mugen 3000mAh battery?

I'm listening to shoutcast a lot by using HSDPA (though not actually using HSDPA speeds) with Pocket player but I'm having power problems. The battery usually only lasts the trip to work (1hour) and then maybe 2 hours more. I'm very mobile in my work (furnishing carpenter) and I want my phone on me while I work. That's why I can't let it be connected to the power outlet while at work. I currently have the Seidio 1600mAh battery and the PDAir hardcase.
That's why I've been looking at the Mugen 3000mAh battery and rubberized case which let's you slide the phone without removing, from a store on eBay.
Case: http://cgi.ebay.com/NEW-BLACK-HARD-...photoQQcmdZViewItemQQ_trksidZp1742.m153.l1262
Battery: http://cgi.ebay.com/NEW-EXTENDED-BA...photoQQcmdZViewItemQQ_trksidZp1742.m153.l1262
Will this work?
Thanks.

The 3000mAh battery requires an extended battery cover, which makes the phone thicker. So that case will not work with the rubberized battery; at least the back of it won't. The front probably would still fit.

Yes I was expecting that but I thought that at lower part of the case would cover half of the lower part of the phone. In that case at least most of the phone is covered. But is there no case that will perfectly fit together with the 3000mAh battery with a belt clip preferably a hard or rubberized case?
edit: What are my options really for a better battery life? Portable charger?

i've got the seidio and unfortunately it seems these type of cases 'snap on' to the phone through tabs. so they must be deep enough or it just won't stay on.
i also have a capdase leather case, which has some sort of shallow tray that fits tightly around the bottom of the stock phone (no plastic). i had hoped to use this with the mugen, but the mugen's replacement case tapers in so it won't fit in the capdase case.... so right now if i use the mugen 3000mah, i just take the phone around 'naked'.
i've been pondering the possibility of one of those cases with the half plastic thing that goes over the keyboard will work... the mugen case makes the phone about 1-2mm thicker. but then again, i'm not keen to buy yet another case for the thing.

That's interesting. 1-2mm thicker isn't that much really. But looking at the Capdase leather and the Nakedcellphone's plastic case pictures it seems It was specially made for the standard hatch+battery. I guess the same applies for the Seidio one.
I have an old Axim X50V with an extended battery and a PDAir alu hard case so it shouldn't be impossible to make one for the Kaiser.
Have you checked if the phone with the Mugen battery works with the OEM leather case?
Thanks.
edit: I think I meant the standard leather case.

so far ??? only one will do with the Mugen 3000mAh ...
Kaiser stock case
http://forum.xda-developers.com/showpost.php?p=1853879&postcount=28
~~~

Unfortunately, the at&t version doesn't come with a case at all. Where can I find the Kaiser stock case? I couldn't find anything on HTC's website.
Thanks,

UnicornKaz said:
so far ??? only one will do with the Mugen 3000mAh ...
Kaiser stock case
http://forum.xda-developers.com/showpost.php?p=1853879&postcount=28
~~~
Click to expand...
Click to collapse
If we are thinking about the same Kaiser stock case (the horizontal one in leather) then I have tried this one and it isn't optimal. The phone is simply to tightly squeezed inside the case.
Actually I bought a case from the same shop on Ebay that sold the Mugen battery (Nakedcellphone) and it fits perfectly with enough room for ventilation but the sides of the clip are starting to fall off for some reason so I've put that one away. The best option for me would be a hard case probably by PDAir but I can't find one. The problem with these belt cases is that whenever you want to use your phone It's unprotected.
At the moment I'm simply using a thick textile bag for it. I also have the phone around the neck with a necklace. It works ok but I would really like a rubberized or a hard case.

kcrumbley said:
Unfortunately, the at&t version doesn't come with a case at all. Where can I find the Kaiser stock case? I couldn't find anything on HTC's website.
Thanks,
Click to expand...
Click to collapse
I seem to remember seeing it on bestbuy business. Otherwise try ebay.
I think this is one actually. Looks like this but with HTC logo on the front.
http://www.puremobile.com/HTC/HTC-TyTN/TyTN-II-Leather-Case-Retail-Packaging/

Best Pouch for the Tilt/Kaiser

Hi all,
I have a case question for you. And it deals with a specific type of case, so that's why I didn't use one of the other threads. I'm looking for a pouch for my Tilt. Like the Krussell Vertica. What I'm after is a vertical leather pouch, that is made just for the tilt only. I can find all kinds of universal ones out there, but they all too big since they fit the HTC apache (6700) I'm after something that fits the tilt snugly. Here's a couple I've found so far:
http://www.tiltdepot.com/krusell-vertica-multidapt-s-wide/4A25A1414A2.htm
http://cgi.ebay.com/MONACO-BLACK-LE...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I've looked at the sensa pouch cases as well. Can anyone recommend a good one that isn't made for all kinds of phones? any ideas? Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Someone has pointed this one out in another thread, it looks nice but they said they could find it for like $15... which I havent been able to do...
http://store.mobilitytoday.com/content/accessories/4-120--3196.htm

tfdeere said:
Hi all,
I have a case question for you. And it deals with a specific type of case, so that's why I didn't use one of the other threads. I'm looking for a pouch for my Tilt. Like the Krussell Vertica. What I'm after is a vertical leather pouch, that is made just for the tilt only. I can find all kinds of universal ones out there, but they all too big since they fit the HTC apache (6700) I'm after something that fits the tilt snugly. Here's a couple I've found so far:
http://www.tiltdepot.com/krusell-vertica-multidapt-s-wide/4A25A1414A2.htm
http://cgi.ebay.com/MONACO-BLACK-LE...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I've looked at the sensa pouch cases as well. Can anyone recommend a good one that isn't made for all kinds of phones? any ideas? Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
A friend of mine has his Tilt in a case like you are describing... I think he said it was actually a Treo 750 case, but his Tilt fit perfectly.
-Jay

I have posted this in this forum before. The Treo 680/750 is within a mm of the dimensions of the Tilt. Any Treo pouch fits like a glove on the Tilt. I am currently using a fitted Treo pouch as my main phone holder.

You can get that Cellet case for less than $11.00 on Amazon.com. I bought one today.
http://www.amazon.com/exec/obidos/t..._shr?_encoding=UTF8&m=A3UW6FFMODPQYZ&v=glance

Thanks Gaby... I was looking for one that said Tilt... didnt know the Treo one would work... I likey the price... I wonder what the clearances would need to be if you have the rubberized case on the Tilt

Just picked up this case at Bestbuy... fits nice and should have enough room for when I put on the hard skin...
http://www.bestbuy.com/site/olspage...+case&lp=2&type=product&cp=1&id=1166840037625

I received my Cellet case from Amazon. My Tytn ll has a rubberized hard case and it fits perfectly inside it.
I need to say this case is beautiful... For $6.00 plus shipping is a great buy.

Tilt/Kaiser Cases
jpofsc said:
Just picked up this case at Bestbuy... fits nice and should have enough room for when I put on the hard skin...
http://www.bestbuy.com/site/olspage...+case&lp=2&type=product&cp=1&id=1166840037625
Click to expand...
Click to collapse
I have that HTC one from best buy listed above, it fits prefectly, has 2 magnets holding the flap closed and the belt clip is metal. It also has a soft velvet interior to resist scratches.
Would be nice if the clip had a double lock on it, though.
~~~
Another I really like is this one; from at&t.
It is in the "Universal Cell Phone" category at the store, at first it was too small, but after a few hours use, it stretched to fit my tilt like a glove. This one makes a real nice case if you need something a little more rugged, its clip made of a heavy (pvc like) plastic that double locks around your belt, making it impossible to accidently come off. The "Ballistic" Canvas has a quality feel and the velcro feel like it will last, not the cheapstuff.
Just be carefull until it stretches, it had the tendency of catching the stylus, doesn't anymore though.
~~~
Both are a bit pricey, but considering the cost of the phone, I wouldn't trust those $9.95 specials, unless I could get my hands on it first. My friend found a $10 version of the HTC one, but the leather on it feels like it would wear down and rip pretty quickly.

NiteStalker said:
Another I really like is this one; from at&t.
It is in the "Universal Cell Phone" category at the store, at first it was too small, but after a few hours use, it stretched to fit my tilt like a glove. This one makes a real nice case if you need something a little more rugged, its clip made of a heavy (pvc like) plastic that double locks around your belt, making it impossible to accidently come off. The "Ballistic" Canvas has a quality feel and the velcro feel like it will last, not the cheapstuff.
Click to expand...
Click to collapse
This case is actually made by Nite Ize, and it is available on Amazon. The LARGE size fits the Tilt best compared to SMALL or PDA/Smartphone. The magnet version is also better than the velcro one.

Best case for Tilt

Hey guys/gals, just thought I'd share this with you. I bought this case for my Tilt and it's one of the best I've had. The phone fits perfect in this case. Snug but easy to get out. I paid $12 on ebay for it. Make sure you buy the one with the attached belt clip (like in my pic). There is another one on there that allows you to change the belt clip. I had that one too but (same perfect fit) but unless you have a thin belt, the clip will not catch the belt. I'll include one of my previous cases. This one is just a better looking case and feels real sturdy. Hope you like it.

Have you seen a case that exposes the miniUSB port? I've seen a lot of good cases, but none that will expose the miniUSB. My second option would be just to go with the Seidio Slim Ruberized case.
Kraize

Kraize92 said:
Have you seen a case that exposes the miniUSB port? I've seen a lot of good cases, but none that will expose the miniUSB. My second option would be just to go with the Seidio Slim Ruberized case.
Kraize
Click to expand...
Click to collapse
Unfortunatly no I haven't. There's a thread on here that has the Seido clip with mods on it. Looks sweet.

I recently had bought a case for my Wing (before getting the tilt) and it fits the tilt perfectly and allows access to the usb port - unfortunately it seems the ebay seller is no longer registered so I can't even get the details from the auction.
This is HTC branded and the listing was titled NEW HTC TOUCH SHADOW MOGUL VX6800 MDA OEM LEATHER CASE
Edit - Found the case, different seller and more expensive, but you can see it - http://cgi.ebay.com/OEM-Leather-Case-Pouch-for-HTC-Wing-P4350-Herald-XV6800_W0QQitemZ150268701210QQihZ005QQcategoryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

I've got the Krusell Orbit leather case with multidapt and I really like it, I've tried several so far and this is the one that I'm keeping...
http://www.krusell.se/product.php?productID=2776&category=51
I've also got the Krusell CarHoldicKit adapter as well to go with it, I like being able to unclip my phone from my belt with the clip still remaining on my belt, and attach to dashboard while driving, it makes using the GPS very easy and other related accessories as well...

dampeal said:
I've also got the Krusell CarHoldicKit adapter as well to go with it, I like being able to unclip my phone from my belt with the clip still remaining on my belt, and attach to dashboard while driving, it makes using the GPS very easy and other related accessories as well...
Click to expand...
Click to collapse
It works that well? I was interested in both the orbit and carholickit (think i still have an old one), but was thinking the flap would be in the way when using it for GPS? This isn't the case?

airjer said:
It works that well? I was interested in both the orbit and carholickit (think i still have an old one), but was thinking the flap would be in the way when using it for GPS? This isn't the case?
Click to expand...
Click to collapse
The flap and GPS? No, I have my mounted like this, so when I open flap it just rests on dashboard:
If you wish you can read my full review of the Orbit HERE, lots of pictures etc included of course

dampeal said:
I've got the Krusell Orbit leather case with multidapt and I really like it, I've tried several so far and this is the one that I'm keeping...
http://www.krusell.se/product.php?productID=2776&category=51
Click to expand...
Click to collapse
That's the one I've just bought... and I like it a lot. Fits really well although the slideout keyboard doesn't slide as smoothly now it's in the case.

dampeal said:
The flap and GPS? No, I have my mounted like this, so when I open flap it just rests on dashboard:
If you wish you can read my full review of the Orbit HERE, lots of pictures etc included of course
Click to expand...
Click to collapse
Thanks for the GREAT review.

I have this HTC OEM case and it's real nice and pretty cheap. Fits perfectly with the Seidio case installed on the Tilt.

I recently purchased the Seidio rubberized case/holster combo. This is an excellent product. I was looking for protection for the Tilt's body, however, wanted to access the screen. I was using the metal case from Monaco, very well built, however, twice my Tilt fell out of the case when the unit was on my belt and the latch caught on the bumper of my car and the Tilt when bouncing on the pavement. Also, my signal was very weak with the metal case, never realized this was the problem as I always used a metal case. I switched to this combo unit and I now have an extra 1-2 bars of signal regularly. Also, I like the fact the holster will hold the unit with the skin in place, faces inward, giving max protection to the screen which is easily accessed. If you want a case to protect the body of the tilt, access the screen easily, and use with a belt clip (do not have to use the clip holster), I could not imagine a better choice. I am very happy with the quality and design of the unit.
https://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSRCG8925-BK

jim131 said:
I recently purchased the Seidio rubberized case/holster combo. This is an excellent product. I was looking for protection for the Tilt's body, however, wanted to access the screen. I was using the metal case from Monaco, very well built, however, twice my Tilt fell out of the case when the unit was on my belt and the latch caught on the bumper of my car and the Tilt when bouncing on the pavement. Also, my signal was very weak with the metal case, never realized this was the problem as I always used a metal case. I switched to this combo unit and I now have an extra 1-2 bars of signal regularly. Also, I like the fact the holster will hold the unit with the skin in place, faces inward, giving max protection to the screen which is easily accessed. If you want a case to protect the body of the tilt, access the screen easily, and use with a belt clip (do not have to use the clip holster), I could not imagine a better choice. I am very happy with the quality and design of the unit.
https://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSRCG8925-BK
Click to expand...
Click to collapse
i second that one. ive gone thru metal, silicone, plastic and even leather cases for my tilt. none of which seemed to work until I went with the seidio innocase holster combo that the gentleman above me stated. its really the best case and it comes with the holster facing inward so you can have maximum protection for your phone with easy access. point blank period.

thetruth1985 said:
i second that one. ive gone thru metal, silicone, plastic and even leather cases for my tilt. none of which seemed to work until I went with the seidio innocase holster combo that the gentleman above me stated. its really the best case and it comes with the holster facing inward so you can have maximum protection for your phone with easy access. point blank period.
Click to expand...
Click to collapse
With that case do you have to face it inside, and is it really worth $50.00? Geez their high.
I already have a soft rubber case and wondering if I could get buy just buying the holster for it.

texas said:
With that case do you have to face it inside, and is it really worth $50.00? Geez their high.
I already have a soft rubber case and wondering if I could get buy just buying the holster for it.
Click to expand...
Click to collapse
not necessarily, you could face it either way and its worth it. believe me, its worth it. even though its a little pricey.

The rubberized case is good. I gave up on the holster because the clip kept getting caught and would disengage the phone causing it to fall.
I got a Palm Treo case and it fits perfectly. The Seidio case also prevents the Tilt's buttons from being accidentally pressed.
This is the best combination of all the cases I have tried.

grymicast184rc said:
I have this HTC OEM case and it's real nice and pretty cheap. Fits perfectly with the Seidio case installed on the Tilt.
Click to expand...
Click to collapse
This is the same case I have. Been very happy with it! For the person who asked... it does leave the USB port exposed.

mrschwarz said:
The rubberized case is good. I gave up on the holster because the clip kept getting caught and would disengage the phone causing it to fall.
I got a Palm Treo case and it fits perfectly. The Seidio case also prevents the Tilt's buttons from being accidentally pressed.
This is the best combination of all the cases I have tried.
Click to expand...
Click to collapse
what holster were u using

GuySparkz said:
what holster were u using
Click to expand...
Click to collapse
I bought the Seidio case and holster combo kit.

looking for car mount

i'm looking for a carmount that doesn't involve a suction cup.I'm really looking for something that can be clipable to the air vent and be able to handle weight since i primarily use an extended battery
Update. I found this instead http://www.proclipusa.com/?sectionp...tegoryid=&p_year=&p_countryid=0&p_leftorright=

I got one aradio shack for $15 that works great. Clips into vent and adjust in size to grip from sides. Charger still fits while in cradle too. Kevin

The one I use is a $9 one from wal-mart. it clips to the air vent & has adjustable sides w/ a space on the bottom for chargers.

Do you like the one from walmart?

Pro Clip is where its at

I bought this set, Everything works great especially for the price.
My first plastic case had the issue of one corner not fitting right, so i contacted them, and they sent out a new one the next day. Fit perfectly.
But it has the car cradle, and a very nice leather holster that holds the phone snug.

amazon has a ginormous variety of all types of holders. i got one a few weeks ago that comes with windshield mount and is also interchangeable to the air vent. also some that are actually custom to the phone for a little more $ with a charger port built in.

Seidio's Innocase Surface Case - Black

I've never had one before, but heard good things about the Seidio case. It's available for order now.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSR2HTFE-BK
I just ordered the case and clip combo.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSR2HTFE-BK
Might get the Innodock Jr. charger later.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CRJHTCX1-BKC

OlSarge said:
I've never had one before, but heard good things about the Seidio case. It's available for order now.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSR2HTFE-BK
I just ordered the case and clip combo.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSR2HTFE-BK
Might get the Innodock Jr. charger later.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CRJHTCX1-BKC
Click to expand...
Click to collapse
I owned the seidio clip holster for my Kaiser and loved it!! Very sturdy and comfortable. Will definitely be ordering one for my Rafael.

Have the hybrid case for the Kaiser. It still is a top-notch case (once Seidio gets their head out of their ass about their online support).

Just got the Innocase and it's much much better quality than the other Amazon one.
Another truly excellent case after the hybrid Seidio case on the Kaiser.
First 3 pictures are of Innocase
4th is with Amazon's case's top with thick borders around the screen
5th is comparison of these "Touch" screen border thickness.
Macro-mode for those that haven't figured it out in the Youtube videos. Yes, Amazon's case has its rubberization already peeling before I took it out of its shipping packet.

4th is with Amazon's case's top with thick borders around the screen
5th is comparison of these "Touch" screen border thickness.
Very illuminating photos - thank-you!
Was "reasonably certain" that would not find using the Touch Screen with a FINGER all that attractive - after all, have hardly ever used my Axim without the Stylus.
But in actual practice find that it IS often convenient to simply swipe a finger at the screen, and so your comments about the relative Screen Border Thickness - and hence the possibility of interference with finger-contact near the edges of the screen - are very interesting.
Still, $30 seems a lot for small hunk of plastic....

rkistler said:
But in actual practice find that it IS often convenient to simply swipe a finger at the screen, and so your comments about the relative Screen Border Thickness - and hence the possibility of interference with finger-contact near the edges of the screen - are very interesting.
Still, $30 seems a lot for small hunk of plastic....
Click to expand...
Click to collapse
As illustrated, the Seidio case is thin (on width) around the screen leaving plenty of space for finger-gestures. Hitting X and menus at bottom is no problem. The Amazon case felt like it was a 8525 again.
There's also velvet in the case back so it doesn't scratch the OEM smooth back. This raises the back a few mm above the original diamond plate, but with the speaker hole, it's all around good protection.
For $30, Seidio tends to be the first and last case you'll ever get because it's a perfect fit, and solid at protection and surviving drops. Only reason to switch to another case is they come out with some other fancy idea such as a hybrid rubber-crystal case + holster, or other colors. I would go for a white case.
I paid $8 (total) for the Amazon case and you can see what I got. Horribly fitting, messes with the slider, rubberization peeling before it came out of the bag. $30 isn't that bad especially since I'm still very happy with the hybrid-case I got for my Kaiser last year.
edit:
whatever case you guys end up getting, I have to say my FUZE is a much more pleasant beast now that the cold, slimy feeling is gone.

the amazon case you purchased is not a good example of the other options out there. I am not saying anything negative about the Seido case. I have seen it personally and it is a nice case, but the one on Ebay that many are buying is also pretty nice, and no issues with the pealing your pictures showed. The employees in my company have 6 Fuze phones and no one has had any issues like that. The biggest illusion with the phone shown at http://forum.xda-developers.com/showthread.php?t=459761 is that the border is white and not black like the rest of the case.
The $30 cost is the main objection, but in general Seido makes quality cases.
Overall it is very positive that there are multiple options now available and more coming each day.

does this one interfere with teh screen as reported on the other amazon/ebay one? something about the inside of the upper left corner pressing down on the screen makes one unable to use the screen after having the case on for a few days... the only way to resolve this with the other one is to file down the inside of the plastic part that touches the screen...
shade

shadeone said:
does this one interfere with teh screen as reported on the other amazon/ebay one? something about the inside of the upper left corner pressing down on the screen makes one unable to use the screen after having the case on for a few days... the only way to resolve this with the other one is to file down the inside of the plastic part that touches the screen...
shade
Click to expand...
Click to collapse
I'm interested in the answer to this question too. My initial attempt at sanding down my rubberized ebay case was not successful, my phone still locked up after a couple of days.
Fuze innocase owners, are you lockup free after days of operation?

jknuckey said:
I'm interested in the answer to this question too. My initial attempt at sanding down my rubberized ebay case was not successful, my phone still locked up after a couple of days.
Fuze innocase owners, are you lockup free after days of operation?
Click to expand...
Click to collapse
on your ebay case, why are you still locking up? mine is not locking up anymore at all after sanding down a little on the inside upper left side?

TVDinner said:
but the one on Ebay that many are buying is also pretty nice, and no issues with the pealing your pictures showed. The employees in my company have 6 Fuze phones and no one has had any issues like that. The biggest illusion with the phone shown at http://forum.xda-developers.com/showthread.php?t=459761 is that the border is white and not black like the rest of the case.
Click to expand...
Click to collapse
Just because you're happy with the work you put into fixing your Ebay case does not mean you should troll other case threads to protect your investment and mind-share about it. Also stating that I'm not a Seidio apologist since I haven't had the greatest shipping experience last time around, and their CS/managers lying back-and-forth about it.
Lock-ups? Are you seriously kidding? That's a red-flag for me right there. Even the Amazon case doesn't have that problem.
The Innocase is a perfect fit with no modifications necessary. That's what paying a slight premium gets you. Costs less than getting the Expansys Touch Pro back too.
It's like paying for the unlocked version of the phone. No crapware, loads of accessories, and special attention to details the cut-rate version doesn't have.
I've noticed the Ebay case has a huge clip tab right next to the volume-up button. The Seidio case clips seem to be more thoughtfully placed, and smaller, thinner. In fact, the bottom case has a cut-out curve around the volume/PTT buttons also that helps the case stay out of the way.

Thank you for you info, and no trolling (that made me laugh) intended. I have the ebay case AND have ordered the Seido case, which we were waiting for. Thanks again.

OlSarge said:
I've never had one before, but heard good things about the Seidio case. It's available for order now.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSR2HTFE-BK
I just ordered the case and clip combo.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSR2HTFE-BK
Might get the Innodock Jr. charger later.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CRJHTCX1-BKC
Click to expand...
Click to collapse
I've had the case, belt clip and charger for a few days. Overall, I'm very happy with the products, and would purchase Seidio equipment again in the future. I've had a few different cases for my old 8525, and I like this one for my Fuze the best.
I love the case. It's not bulky, and has a good feel to it. I wasn't sure about the clips that hold the case to the phone, because they looked fragile...but it holds very nicely.
The belt clip for the case is fine. Seems to hold the phone and case in very well, and the belt clip will not slip off any belt I've tried it on.
The charger...I'm not happy with it. That's my fault not Seidio's, I didn't read the description of the charger. I'm sure it's a quality product. It is a small dock type charger, but comes with a cable with two large USB connections on it. So it can be docked when plugged into a computer's USB. I thought it would have a connection to plug into a wall outlet.

Just bought the combo pack, Will post pics when it arrives.

Just wondering if this case will fit the Bell / CDMA version, is it a rubber type compound, as well does the case scratch the phone in any way?
Thanks

Some questions?
For ppl that have the combo case/holster. Can you put the phone with the case on it, in the holster with screen facing in (screen facing you) and out (screen facing away from you)?
Thanks

TVDinner said:
Thank you for you info, and no trolling (that made me laugh) intended. I have the ebay case AND have ordered the Seido case, which we were waiting for. Thanks again.
Click to expand...
Click to collapse
Hey TVDinner, why did you order the Seidio case? Did your filed ebay case start locking up again?
To answer your question to me in my earlier response, I don't know why my ebay case locked up after my filing attempt. Maybe I didn't file it enough? My tolerance level for trial and error is pretty low, so maybe I'll just order the innocase...

jknuckey said:
Hey TVDinner, why did you order the Seidio case? Did your filed ebay case start locking up again?
To answer your question to me in my earlier response, I don't know why my ebay case locked up after my filing attempt. Maybe I didn't file it enough? My tolerance level for trial and error is pretty low, so maybe I'll just order the innocase...
Click to expand...
Click to collapse
Hi jknuckey - no my ebay case is working great to be honest. no issues at all after my initial filing on it. But I always need to have "the best" case, lol. I was originally waiting for the Seidio one, but they were taking to long and I ordered the ebay one. then shortly after the Seidio one became available, lol.

datruth said:
For ppl that have the combo case/holster. Can you put the phone with the case on it, in the holster with screen facing in (screen facing you) and out (screen facing away from you)?
Thanks
Click to expand...
Click to collapse
There are two models of the holster.
One that fits only just the phone:
https://www.seidioonline.com/ProductDetails.asp?ProductCode=HLHTFEAS
"Seidio's stylish holster provides the ultimate in convenience and functionality by securing your Smartphone on all sides.
- Unique Spring-Clip holds your device securely and lifts for quick access
- Soft-touch "rubberized" texture provides a unique look and extra protection
- Face-in design protects your device's screen
- Locking swivel belt clip with 7 rotating angles
- Easy access to connectors"
One that only fits the phone with the case:
https://www.seidioonline.com/ProductDetails.asp?ProductCode=HLHTFEASC
"Seidio’s Innocase holster offers the best carrying solution when paired with our Innocase.
- Designed specifically for Seidio Innocases
- Unique Spring-Clip holds your device securely and lifts for quick access
- Face-in design protects your device's screen
- Locking swivel belt clip with 7 rotating angles
- Easy access to connectors
*This holster is designed for use exclusively with our Innocases and will not fit a "naked" device or other manufacturer's products. "
The holsters are custom fit, the phone only goes in facing you.

NuShrike said:
Just got the Innocase and it's much much better quality than the other Amazon one.
Another truly excellent case after the hybrid Seidio case on the Kaiser.
First 3 pictures are of Innocase
4th is with Amazon's case's top with thick borders around the screen
5th is comparison of these "Touch" screen border thickness.
Macro-mode for those that haven't figured it out in the Youtube videos. Yes, Amazon's case has its rubberization already peeling before I took it out of its shipping packet.
Click to expand...
Click to collapse
Hey bro any peeling so far from the Innocase? I just ordered it... I had the ebay one but man screen still freezing after I filed.. bleh...