Need some help - XPERIA X1 General

Hello
New to this Forum and also new Xperia Xi user.
I've tried to upgrade the ROM from the current 1.02.931.3
to the Xperi3.01 WWE.
Whenever I try to run the ROM update utility I keep getting error 262.
After following the recovery instructions to the letter I still keep getting
the same error. Would be grateful for any advice. Have done soft and hard
resets but to no avail. One thing I noticed was that just after the initial
3 colour boot screen the words image file not found appear briefly on
the screen, however the .nbh file is in the same directory as the update utility.
Very new to all this, so apologies for any inconvenience.
Thanks and regards
Joe.

hardspl first?

Could you please expand? - Not sure what you mean?
Thanks

You gotta do:
fards said:
hardspl first?
Click to expand...
Click to collapse
Then you can:
skywreck said:
I've tried to upgrade the ROM from the current 1.02.931.3
to the Xperi3.01 WWE.
Click to expand...
Click to collapse
Look at the "Sticky" theads here and click on "Sticky: Hard-SPL for Xperia X1 - Released! ( 1 2 3 ... Last Page)" when you get there.
All the information you need is posted.

Related

Unable to re flash my orbit

I need help guys, I've tried searching but i cant find the solution, I have run uspl a few weeks ago and have been experimenting with some different roms and yesterday I installed a new rom, WM6_WWE 3.7+ RADIO 2.94.90+BigStorage (found here http://forum.xda-developers.com/showthread.php?t=318835&highlight=big+storage) and now cannot re flash my device. It does enter bootloader then the progress bar goes to 3% and I get the message ERROR [270] UPDATE ERROR
This has never happened to me before. Can anyone help?
Many thanks
guerilladev said:
I need help guys, I've tried searching but i cant find the solution, I have run uspl a few weeks ago and have been experimenting with some different roms and yesterday I installed a new rom, WM6_WWE 3.7+ RADIO 2.94.90+BigStorage (found here http://forum.xda-developers.com/showthread.php?t=318835&highlight=big+storage) and now cannot re flash my device. It does enter bootloader then the progress bar goes to 3% and I get the message ERROR [270] UPDATE ERROR
This has never happened to me before. Can anyone help?
Many thanks
Click to expand...
Click to collapse
Re-flash USPL and try again.
Panic over, thanks very much Shand359!! Its working just fine now. I guess the SPL was too high eh? I did try to reflash with uspl at first but it seems the copy that I had on my pc was corrupt, i downloaded it and its flashing a new B&B3.7 right now. Thanks again!
Glad you got it going.
XDA ORBIT
Hi guys,
I have trouble with my orbit.
It is german and i want to change it to English,
i suppose i have to flash it before using the new english rom..
I do not know anything about this things..
Please help. Thank you...
02AN
Check out this thread below...
This will unlock your orbit, then you can install any rom....
Sure the english rom is on here somewhere
http://forum.xda-developers.com/showthread.php?t=311403
G
baboon99 said:
02AN
Check out this thread below...
This will unlock your orbit, then you can install any rom....
Sure the english rom is on here somewhere
http://forum.xda-developers.com/showthread.php?t=311403
G
Click to expand...
Click to collapse
First of all, thanks..
I did, and it said updated. I thought it is done..
And i will try to load english rom..
But i scared to do this action because i do not wanna lose my device.
I suppose i have to use it on german language...

How to FIX INVALID MODEL ID after bad flashing

I change the rom and Advantage it´s broken!!!!!!!!!!!!!!!!!!!!
The error is ERROR 244 INVALID ID
i have flashed my unlocked athena x7500 with rom 6.1 by irius. the update breaks at 98%.
now i have only pixels on screen, and nothing happens.
in the Bootloadr following:
\
IPL-v1.00
\
SPL-v1.20 Olipro
Help... help... help...
Explain a little more by 'changing ROM'!
I was entering a rom and I was blocking the Athena by making a reset everything returned to normal but I can not enter another rom because I get this error.
As we enter the ATHENA in Bootloader I get:
, @
IPL-V1.00
, @ MFG
SPL-3.50.OliNex
Missing data?
What ROM are you coming from? What ROM did you attempt to install? How are you trying to install it?
I'm still a little confused by 'blocking the Athena by making a reset'
If you are attempting to reflash your device to a different ROM, make sure you follow the instructions posted around the site.
Are you downgrading? Using cmonex downgrader....... I hope I can help but I need a little more information from you on whats going on.
Or maybe someone else can chime in if they get it!!!!
Montecristo said:
I change the rom and Advantage it´s broken!!!!!!!!!!!!!!!!!!!!
The error is ERROR 244 INVALID ID
Help... help... help...
Click to expand...
Click to collapse
cmonex has a automated fix for that, i think its under upgrading fourm
Irus, just to take advantage of this learning opp. What did Montecristo do to the device (or try)? What happen to it?
Kenjari said:
What ROM are you coming from? What ROM did you attempt to install? How are you trying to install it?
I'm still a little confused by 'blocking the Athena by making a reset'
If you are attempting to reflash your device to a different ROM, make sure you follow the instructions posted around the site.
Are you downgrading? Using cmonex downgrader....... I hope I can help but I need a little more information from you on whats going on.
Or maybe someone else can chime in if they get it!!!!
Click to expand...
Click to collapse
I had installed the rom iRUs, then installed the new rom taxist and 98% were blocking ...
Try to re install and continues to bug me.
Please, my English is not very good ... some help ...
I made the downgrade but I continue to get the same error!
You used the wrong SPL Version
Montecristo said:
I made the downgrade but I continue to get the same error!
Click to expand...
Click to collapse
It seems that you did not read taxists instructions that it is for SPL 3.5 only
Why don't you try flashing AP3
Edit:
sorry bit of confusion with what you have done.
Were you on SPL 3.5 originally?
Did you use Cmonexs downgrade file after the failed Taxist flash?
If you did then trying AP3 for SPL 1.XX should work.
lakeman said:
It seems that you did not read taxists instructions that it is for SPL 3.5 only
Why don't you try flashing AP3
Edit:
sorry bit of confusion with what you have done.
Were you on SPL 3.5 originally?
Did you use Cmonexs downgrade file after the failed Taxist flash?
If you did then trying AP3 for SPL 1.XX should work.
Click to expand...
Click to collapse
I had the spl 3.5 when installing this ROM.
Already concerned with all rom and tell me the same problem.
same prob >> http://forum.xda-developers.com/showthread.php?t=405496
but with spl 1.2
maybe this helps http://www.xxacsxx.wg.am/ameorepair.html << but its german
xacsx said:
same prob >> http://forum.xda-developers.com/showthread.php?t=405496
but with spl 1.2
maybe this helps http://www.xxacsxx.wg.am/ameorepair.html << but its german
Click to expand...
Click to collapse
Exactly .. this is ... We saw your resolve?
IT WORKS!!!!
http://forum.xda-developers.com/showthread.php?t=387454&highlight=mtty&page=4 <<< see here
my ameo lives again YEEEEEEEEEEEEEHHHAAAAAAAAAAAAAA
ok, i'll probably make a new thread and sticky that. about modelid (and wifi) restoring
but yeah until then everyone use that link,
http://forum.xda-developers.com/showthread.php?t=387454 here mainly 33rd post.
if you already managed to screw the modelid, the downgrader won't help, because it only reads the current information (of modelid and wifi) and transfers it to the right place when downgrading.
but the above link always helps. you just need a mac address to enter in the program.
cmonex said:
ok, i'll probably make a new thread and sticky that. about modelid (and wifi) restoring
but yeah until then everyone use that link,
http://forum.xda-developers.com/showthread.php?t=387454 here mainly 33rd post.
if you already managed to screw the modelid, the downgrader won't help, because it only reads the current information (of modelid and wifi) and transfers it to the right place when downgrading.
but the above link always helps. you just need a mac address to enter in the program.
Click to expand...
Click to collapse
YES!!!!!!!!!!!! YEAH!!!!!!!!!!! SI!!!!!!!!!!!!! SI !!!!!!!!!!!! MASTER!!!!!!!!!!!! GENIUS!!!!!!!!!!!! MAESTRO!!!!!!!!!!!! GENIO!!!!!!!!!!!!!!!!!!
Thanks!!!!!!!!!!!
Now'm going to donate some money for what they've done !!!!!!!!!! Thank you
Thansk!!!!!!!!!!!!!!! Xascx.
I´m very happy!!!!!!!!!!!
Sticky done, thanks CMONEX!
sergiopi said:
Sticky done, thanks CMONEX!
Click to expand...
Click to collapse
ahh I didn't notice you are a moderator thanks for stickying this.
mac number?????
hello all !
i have the same problem but with the 1.20 spl
please where i can find my athena "mac number"
what i have to do ?
please help me and sorry for my english
meybaland said:
hello all !
i have the same problem but with the 1.20 spl
please where i can find my athena "mac number"
what i have to do ?
please help me and sorry for my english
Click to expand...
Click to collapse
If you use router, the number is there....
Few questions:
How do you mess up the modeID and wifi anyway? Is it flashing to many ROMs? Does this automatically happen with the upgrade to spl 3.5? How does this happen?
Second, I have ran across my the mac address....but I'm having a blank....where can you find that at?

Unable to USPL ?

Hello folks,
I'm new here. I don't know much about the technical stuff.
I have HTC3300 (Artemis).
I installed "Gullum's WM6.1 Beta version" in it but It became slow
than I searched here in this xda forum for WM6 and found a WM6 rom for Artemis.
I installed it.
That rom's name is "HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_ R".
Now I'm not able to USPL. I have tried 3-4 times. (without SIM and SD Card)
After using USPL utility, on booting it shows:
IPL 3.13.0001
SPL 3.13.0000
GSM 02.94.90
OS 3.13.0.0
SPL is not changing to 1.11.0000. Please HELP me.
How can I unlock it?
I mean how can I succeed to USPL my Artemis?.
I shall be GRATEFUL to YOU
Welcome to the forum.
You have posted two times the same thing, and still didn't said what the problem was...
Can't USPL.. Ok.. But why? Any error? Any something?
Next time just try to don't double post ok?
Cheers
Zecanilis said:
Welcome to the forum.
You have posted two times the same thing, and still didn't said what the problem was...
Can't USPL.. Ok.. But why? Any error? Any something?
Next time just try to don't double post ok?
Cheers
Click to expand...
Click to collapse
First of SORRY for the double post. I thought the same previous post will hide in between the posts in that thread. I won't repeat this in future..
Problem is that I want to upgrade the Radio Rom, so when I use the USPL tool to CID unlock my phone,
after reaching 10%....20%....30%.....40%....50%....60%....70%.....100%, the screen become white and phone gets disconnected from the Active Syn.
Either I have to remove the battery or I have to soft reset to start the phone after "white" screen.
On booting, it still shows SPL 3.13.0000 not showing 1.10.0000.
SPL didn't change to 1.10.0000, is it means that device is still CID locked?
please tell me where I'm mistaking here..
I'm using Vista Ultimate SP1 in my Notebook.
Nobody is there in this forum,
who can help ME ??
Anyway ... thanx to everybody..
I myself found the solution...
New Radio Rom - INSTALLED > 03.34.90 ..
I'll post my feedback about this new RADIO ROM 03.34.90 in the main post by Zecanilis
Thanks "Zecanilis"
could you please let me know the solution?
I got the EXACT same problem
thanks.
Dont worry, the solution was on this post by pvdhelm:
http://forum.xda-developers.com/showthread.php?p=1312109#post1312109
Bhups said:
could you please let me know the solution?
I got the EXACT same problem
thanks.
Click to expand...
Click to collapse
nothing to worrying.. just keep going..
when white screen appeared, i just continued to flash my phone by starting RUU application usually present in the rom folder along with the rom to be flashed..
it showed progress bar in the Computer screen {from 1% .... till 100%}while the PPC screen appeared white during this procedure..
and the flashing process reached to 100%, displaying CONGRATULATIONS on the Computer screen and PPC got restarted by itself with new ROM.
I have done flashing up to 20-25 times by this method.
Phone is WORKING like a CHARM.. NO PROBLEM AT ALL ..

Sending HD2 back to Vodafone tomorrow, need help installing stock 1.42 ROM over 1.61

Hi guys as the title says I'm receiving a replacement HD2 tomorrow whilst giving my old one in and I'm afraid I'll get in trouble if I give in one with a 1.61 ROM. I flashed it with 1.61 using the goldcard method and I just tried running the normal installer for the 1.43 stock Vodafone ROM but I get this error:
"this update utility cannot be used for your pda phone..." Surely I don't need to use the goldcard method for the stock ROM do I?
Also can I use the same 1.61 goldcard for my new HD2?
Quick answers appreciated as I need to do this before tomorrow! Thank you very much for your help
Assistance (I hope)
Hi I am a newbee but the RUU_Leo_Vodafone_UK_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50.22_2_Ship is available as a link somewhere on the site.
I have just HSPL my voda leo and as part of the instructions from
DFT, bepe and Cotulla you should do the following to revert...
Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button
Hope this helps...
MaskedMagi said:
Hi guys as the title says I'm receiving a replacement HD2 tomorrow whilst giving my old one in and I'm afraid I'll get in trouble if I give in one with a 1.61 ROM. I flashed it with 1.61 using the goldcard method and I just tried running the normal installer for the 1.43 stock Vodafone ROM but I get this error:
"this update utility cannot be used for your pda phone..." Surely I don't need to use the goldcard method for the stock ROM do I?
yes you do
Also can I use the same 1.61 goldcard for my new HD2?
i would recommend you to install hspl in order to install any cooked rom you want
Quick answers appreciated as I need to do this before tomorrow! Thank you very much for your help
Click to expand...
Click to collapse
see above the answers
you need this
Hi
here it is but i did not try it by myself
http://rapidshare.com/files/3260420...dio_Signed_15.26.50.07U_2.04.50.22_2_Ship.exe
Thanks for your help guys, I'll see how I get on, the rapdishare link is down for the moment which is annoying though...
If worst comes to worse I'll just have to send it back with the 1.1 ROM, surely they wont find out then come back to my house and take the newer replacement off me?
I'll let you know how I get on, though might need more help in a minute given my track record!!
MaskedMagi said:
Hi guys as the title says I'm receiving a replacement HD2 tomorrow whilst giving my old one in and I'm afraid I'll get in trouble if I give in one with a 1.61 ROM. I flashed it with 1.61 using the goldcard method and I just tried running the normal installer for the 1.43 stock Vodafone ROM but I get this error:
"this update utility cannot be used for your pda phone..." Surely I don't need to use the goldcard method for the stock ROM do I?
Also can I use the same 1.61 goldcard for my new HD2?
Quick answers appreciated as I need to do this before tomorrow! Thank you very much for your help
Click to expand...
Click to collapse
As far as i know/read into it,
The goldcard you used already will work again, You might need to reformat and hexedit again before it will work as that is what i had to do on 2nd rom update.
Rapidshare works now
sbibif said:
see above the answers
Click to expand...
Click to collapse
addendum: YES you can use the same Gold card for your new device.
good luck with reverting to stock ROM, hope it works out for you!
Thanks just downloading the stock rom from rapidshare now. I got impatient so I just bought a one month membership, oh well I guess it will come in useful anyways, fingers crossed...
I have tried PDAVIET rom
http://forum.xda-developers.com/showthread.php?t=606816
its working fine ...
there are few bugs but running smoothly...
MaskedMagi said:
Thanks for your help guys, I'll see how I get on, the rapdishare link is down for the moment which is annoying though...
Click to expand...
Click to collapse
Rapidshare is always busy, especially in the evening (CET). Keep hitting the F5 button in your browser, and you'll get lucky. Otherwise, get up early tomorrow and download will not be a problem. Alternatively google for the file name, someone somewhere could have it
Aaand done. That was unbelievably painless. All I did was plug my phone in via USB and double click the ROM file I downloaded off rapidshare, then it worked like a charm didn't have to do a thing!! Thanks for all your help guys, these forums are amazing!

Have anyone to help

have a HTC Athena 7500 SLP-V1.20 OLIPRO and tried to install Athena_SPL3.5_R6.5_RC1_B21500_MiChY And U.S. IMPOSSIBILITIES nothing more I DO HAVE ONLY THREE COLORS UKRAN have no proper rom not know how to get it back to life if you can help I would gladly pay
Hope it helps
skorpionxxx said:
have a HTC Athena 7500 SLP-V1.20 OLIPRO and tried to install Athena_SPL3.5_R6.5_RC1_B21500_MiChY And U.S. IMPOSSIBILITIES nothing more I DO HAVE ONLY THREE COLORS UKRAN have no proper rom not know how to get it back to life if you can help I would gladly pay
Click to expand...
Click to collapse
Hi,
I will try to help, though not an expert, because few minutes ago I managed to fix a problem that looks like yours. Actually this is my first post!
What I suggest is to initialize your device by flashing a shipped rom. You can find it by googling "shipped roms" and looking for "athena"
First, download the version: RUU_Athena_HTC_WWE_1.25.405.2_1.38.00.00_Ship.exe
Then, enter the bootloader (this is the tri-colored screen), by fully pressing camera button + reset. Make sure that you see "USB" at the bottom part.
Then, run the downloaded rom.
This is a good start, as you will bring your x7500 back to life.
PS. Don't be dissapointed about the no-reply, because the device is considered old and only few people spend time for it nowadays. Just smile and be positive...
I hope I helped!
First aid thanks
Now I have this
ERROR 244 INVALID MODEL ID
This update utility cannot used for your PDA phone.please check your update utility
Now what help please:crying:
2nd attempt
skorpionxxx said:
Now I have this
ERROR 244 INVALID MODEL ID
This update utility cannot used for your PDA phone.please check your update utility
Now what help please:crying:
Click to expand...
Click to collapse
I would suggest downloading and trying to install other shipped rom's from the same website. There are lots of versions/languages in there. I think that you should try the one for your preferred language.
As for me I installed the WWE because there was no rom available in Greek but I don't mind at all
There is another WWE one in "Advantage", on the devices list. Give a try!!

Categories

Resources