I have the HDC 3600i Pro.
This is a little annoying (at night) so I wonder if there is a function to turn off the yellow operation light or at least stop it blinking.
note I'm talking about the light just above the screen.
I think the light is the one that says you have a link to the mobile carrier and the simplest solution is probably to put your Trinity face down on a cushion. It's what i do.
I did eventually find a hack called LED killer which I install and no blinking light
note it just disabled the blinking behaviour all the other functions like charging and wifi and bluetooth are still active..
exactly what I wanted
I think the LED killer is good for all HTC devices apparently.
Yes, you can change the led status by nueLed, i do the same for the Status Led that disturb my sleep
http://forum.xda-developers.com/showthread.php?p=1954259
Bye.
Related
Well i dont wether this is normal or not on this model but, my leds are always blinking blue (BT) and green (GSM). Although, if i receive a message or the battery is low, the led's still blink in the same color. Only if i receive a call and dont pick it up, then the led changes to yellow(?). This situation occurs in standby mode. But if i turn on the device then when i receive messages the led goes yeallow and if the battery is low it blinks red. In addition if a have an aplication like media player, playin in standby mode (screen turned off) then the leds blink like the device is turned on (described above). Is this normal? In my prophet, the led's blink like they should wether the device is on standby or on.
Have you read the manual? Search the net if you don't have a copy.
WB
LOL...the led's are fine, but the thread is crazy
wacky.banana said:
Have you read the manual? Search the net if you don't have a copy.
WB
Click to expand...
Click to collapse
i didnt. i dont have it lol. either way who reads it? i just compared it with the prophet...
i just purchased a touch hd and was wondering why the led indicator lights are not flashing?
i notice that there is an led indicator light on the power button and also next to the earpiece; from my old tytn II, the led indicator flashed amber for service and also blue for bluetooth.
i currently have service and my bluetooth is on, but i don't have any flashing indicators.
is there a setting to turn them on?
This is not a led is a light sensor.
akhoury said:
i just purchased a touch hd and was wondering why the led indicator lights are not flashing?
i notice that there is an led indicator light on the power button and also next to the earpiece; from my old tytn II, the led indicator flashed amber for service and also blue for bluetooth.
i currently have service and my bluetooth is on, but i don't have any flashing indicators.
is there a setting to turn them on?
Click to expand...
Click to collapse
The one next to the earpiece is a light sensor.
The other flashes green for missed event, stays green for finished charging, amber for charging, and flashes amber if you're low on power.
Is there a registry hack to get the "old" LED behaviour? (Cell locked in=Flashing green, Notification = flashing yellow, Bluetooth = flashing blue etc.)
I don't think there is a solution for this (yet).
in anycase, it is only a bi-colour LED - ie Amber and Green - no blue.
I have the same problem: my green led flashes for missed calls but not for incoming messages.....
Can you help me?
Thanx a lot
Dani3l3 said:
I have the same problem: my green led flashes for missed calls but not for incoming messages.....
Can you help me?
Thanx a lot
Click to expand...
Click to collapse
Start, Settings, Personal, Sounds & Notifications, Notifications, Messaging: New text message, Flash light for....
That LED is so tiny and dim I find it's easier to just hit the power button and look at my screen to see if I have missed calls/texts/etc.
well theorticall you woud have to seek out the powr button with eyes first
kdding
Thanks.....
My HD have an Italian ROM and the translation is poor...... nothing about "led blink"
I've resolved checking a flag translated as "turn on screen if incoming message".........
I think i'll try a WWE rom.....
Thanx a lot
dani, that is the correct option. Italian translations suck
I tried looking in the forum for any info on the status LED next to the speaker on the front side but I don't see any posts on this. Is this LED supposed to flash or do something? On my HD it has never worked? Is it supposed to work?
I remember on my Artemis it would flash green for good reception, blue for bluetooth and red if the battery was low.
FrancoBollo said:
I tried looking in the forum for any info on the status LED next to the speaker on the front side but I don't see any posts on this. Is this LED supposed to flash or do something? On my HD it has never worked? Is it supposed to work?
I remember on my Artemis it would flash green for good reception, blue for bluetooth and red if the battery was low.
Click to expand...
Click to collapse
I may be wrong but i was under the impresion that this was a sensor rather than a LED.
No, that's entirely correct, it is the light sensor. The LED is in the power button.
the status led is on the power button on the top right hand side of the blackstone...the place u highlighted is a sensor as what scotia has point out..
I think that it is a proximity sensor used to blank screen when you put the phone on your ear to talk.
It's actually the light sensor used for when you have automatic display brightness enabled. When it's dark, it turns down the brightness... And when it's a sunny day it cracks it up. I am not sure whether it's used to blank the screen during a call... This seems to happen after a period of time has elapsed.
Gav
ok thanks for the info.
So does the power LED on the top side flash any color to show the status of the reception or does it only light up orange when it charges?
Thanks.
doesn't do anything for reception..although mine flashes green hen I have a message/email/reminder
pity though, a decent LED to show such things was probably high on everyone's wishlist
No, the HD is perfectly unobtrusive. On my last PDA the LED had to be tweaked to stop flashing.
Too bad this isnt a LED diode Since I got on my Diamond a light notification (on the bottom of device)... when I recieved new sms... now on HD there is no way I can figure do I have new sms or notification unless I turn the screen on. The only hardware flaw by mine opinion
When its lying down, I agree with you. Then I have to turn on the screen. However when its lying next to me I'm usually not in a place were I can't use my phone, so the sound is on anyway.
I actually think its quite good the LED is on the top, it's easelly visible when the phone is in my pocket. I just have to pull the phone up a little and look down to see the LED (no need to get it out and turn the screen on). I like it on the top, nice and discreet, and not anoying me when I'm looking at the device while using it.
Perhaps a combination would be nice? Front and top That would sattisfy most people I guess...
Hi all.
When you charge your Flipout, a green light stays on by the MicroUSB port letting you know the phone is charging.
Is there a way to make this green light the notification light?
The default white notification lights on the front of the phone are kind of difficult to see.
I find myself sometimes squinting at the phone trying to determine if it's blinking or not. Obviously if you're in a dark room or something this won't be an issue but in a normal lit environment is where I spend most of my time.
If there is no way to make the green light act as a notification light, perhaps you can have the screen itself light up a few times.
Is anything like this possible or am I out of luck?
Thanks.
Rooted phone here.
The notification LED doesn't seem to be working for...notifications. No matter what kind, I can never tell I have a notification until I turn the screen on. Anyone have the same problem/solutions?
Not really, perhaps the problem is that it's only Red or Green, its not an RGB LED. I've seen it blinking when a whatsapp message comes in or if I have a missing call but it blinks too fast, so that's the problem and you can't change the timing either.