I just find that the ringer is often not loud enough for me. Maybe it's my ripe old age of 32 that has brought me to this point of degraded ability but if I leave my phone downstairs or vice versa, I usually won't hear it ring. Worse is the one time sound notification, that's rather short in my opinion, for SMS's. Both of these are even worse if I forgot to remove my phone from the protective sleeve.
I searched and only found people having issue with the volume in relation to calls but no mention if I could increase ringer volume above what is currently selectable. Is there any way to increase this volume and/or extend the ring time for the text notifications?
http://www.wirelessinfo.com/content/T-Mobile-G1-Cell-Phone-Review/MakingReceiving-Calls.htm
According to that website, they tested the G1 ringer volume and found it to have the lowest dB of all the phones they tested.
Is it that speaker is underpowered? Is it possible that we may be able to re-encode the ring tones with a higher volume to help compensate?
I don't think it has a low volume... I think it has to do with what you are using because it is just as loud as my Wing when playing music.
What I'm using? As in which ring tone? I've tested several different ones and they all seemed the same to me. Do you have any suggestions?
I have the same problem frequently, it isnt that you dont hear the rings or notifications, they actually dont play at all. I have had this happen with my phone on in front of mewith a great signal, and I call it from another line. It "rings"(but never does), finally ending in a voicemail. When I hang up and check the G1 it shows a missed call and voicemail.
Unfortunately there is no fix, just a reminder that you bought a phone that shouldnt be expected to work until the system is given time to mature. Until then, you either return the phone, sell it, or live with its limitations. (or so I have been told)
No, I have that happen too, but I do frequently have it ring just not loud enough for me to hear it. I know because my girlfriend often has to tell me when it's ringing if I've left it in another part of the house.
I have also noticed that the ring volume isnt great with the standard wring tones. Using mp3 ringtones is better.
Notifications do sometimes seem buggy. I have had no notifactions with messages when i have had the message application open. Not even vibrate.
I have missed calls installed now for notifications and it seems to not happen anymore.
Theres also a program out in the market that allows you to create your own ringtones from full songs. You could just cut a song into a small section and use that for messaging.
Its called ringdroid
I have missed calls installed now for notifications and it seems to not happen anymore.
Click to expand...
Click to collapse
The down-side to this feature of the program is, the notification light will stop. If you check your missed calls, texts, so on from the bar on top.
You have to actually open the "programs" manually to keep the notification light working.
Ex. if you get a missed call, instead of pulling down the notification bar to check. Press the call button once.
if you get a text, open the messeging inbox using the messeging button or SMSChomp button.
Try to limit how often you have to pull the notification bar down.
Pulling the notification bar DISABLES ALL notifications of all kind.
Related
Hi folks,
I'm aware of the registry hack to change the RingTone settings (such as vibrate length, etc), but can this be done for the notification alert? When I get a notification the phone just vibrates for too long.
Any help appreciated.
PaulB
Hi,
Any help on this would be most appreciated, as the vibrate just goes on too long, and not only annoys me but everyone in my (quiet) office!
You can set the vibrate length in seconds for RingTone0 in the registry so there must be an equivalent for the notification alert?
PaulB
i second this request, the whole scripting thing for ringtone0 is simple but bizarre especially as there seems to be no equivalent settings for text/email notifications. There must be a way!
Change duration of notification vibration (hey I'm a poet!)
Sorry to bump this again, but as some time has passed I wondered if anyone had managed to find the reg settings for the notification alert?
I really need to shorten the vibration duration for notifications.
I second this, the message alert is way to long. Hope someone have a sollution to this.
Jarle
Fix for long vibration
I recently switched from the Sidekick 3 (I had the sidekick 1, sidekick 1 color, and sidekick 2 as well) to the 8525/TyTN and immediately found this vibration issue described above extremely annoying. The sidekick uses the sound file normally played to generate the vibration pattern, meaning if the sound file has two large amplitude alerts 1 second apart, if the phone is in vibrate mode, it would vibrate twice, with a 1 second spacing.... along with "the beat" of the audio.
Anyways, I discovered today that Windows Mobile does this as well to some extent. If the phone is set to vibrate mode, then it seems that all notifications vibrate as the long, 5 second or so, vibrate that you're all familiar with. HOWEVER, if the notification is set to vibrate and sound acoustically, it vibrates for the duration of the sound file. Strangely, this does not work when the phone is set to only vibrate. To get around this, what you need to do is set your notification (text message, e-mail, whatever) to both play a short sound and vibrate, then set your phone's audio to be on, but then turn the volume all the way down. In this setting, the phone does not play a sound, but does vibrate according to the length of the audio file.
I haven't tested this extensively, but it seems to work so far. This actually was one of my biggest complaints about the phone and i'm very glad i've found a simple work-around.
Let me know your experiences and/or if it doesn't work for you,
Todd
quite a great idea there, but was hoping someone has figured out a better solution?
what about going one step further with this and make a short wav file of pulsed noise, but at 20kHz. you won't here it!
All,
I have just joined this board searching for a solution to EXACTLY this problem. What is required please is a registry tweak that shortens the vibration alert for text messages, etc, when the phone is set ot vibrate only.
The ringtone fix to shorten the vibration alert works when a call comes in but NOT when a message comes in.
Any help on this would be very much appreciated.
Thanks
WB
Oh wow. I have the same annoyance with my phone. You send a text on vibrate and it goes nuts for an hour! Not really that long, but for just a text message notification it should be a little 1 second bitz.
This long vibration is really bad when you are in class and it goes for so long. My phone hits right against those plastic chairs through my pocket and resonates though out the whole room.
Unfortunately the Notification registry entries don't have a script option.
If you go into
HKEY_CURRENT_USER\ControlPanel\Notifications
the Default String tells you what the each directory is for.
The other keys are
AvailableOptions - What options you can pick from in the Sound/Notifactions screen in settings,
Duration - the length of time the light flashes (5,10,15,20,30,45,60min, 0=no limit)
Options - what sort of notifications you want
1=play sound
2=vibrate
3=play sound, vibrate
4=flash light
5=play sound, flash light
6=flash light, vibrate
7=play sound, flash for, vibrate
8=nothing
9=play sound, display message
10=nothing (can only pick play sound and vibrate)
11=play sound, display message, vibrate
12=Display message, Flash light
13=play sound, display message, flash light
14=display message, flash light, vibrate
15=play sound, display message, flash light, vibrate
senergy said:
Unfortunately the Notification registry entries don't have a script option.
Click to expand...
Click to collapse
So what you are saying is there is no way of making the vibration shorter? No way at all? Could you add an option for time? Is there some program?
Senergy,
Many thanks for your response. Disappointing news as this is a serious nuisance.
I have lost count of the number of times I have been in meetings where the phone has gone off in vibrate mode only for the whole world to know I have had a message. Many a time I simply turn all alerts off which defeats the objective of having a discrete vibrate system.
I rang HTC's support team in the UK and got nowhere.
I wonder if a written query into them might get a more productive response?
WB
Anyone heard of any solutions yet? I've been searching google, forums, etc for days with no luck yet.
DRChrysler,
No but see thread link below. Shantz may yet be able to help us out here.
Cheers
WB
http://forum.xda-developers.com/showthread.php?t=311838
Hi !
Has somebody found some solution to reduce the delay for the ringtones for blackstone ?
I've installed the second cab here (http://forum.xda-developers.com/showthread.php?t=258109) as well as write in the registery (av0pw0r), but i can't reduce the delay under (almost) 2 ring tones, eventough i use a *.wma file.
I've also tried to play on HD tweak (1.7 option), but this does not change anything...
This is very annoying me, i've already lost some calls.
I haven"t tried yet a cooked ROM, but i wonder if this would change something
Please help
make sure the ringtone is on the phone and not card. That helped me a lot.
tks for your answer.
But well, i use (for the moment) the "Alarm-Classic.wav" under windows\rings, so i think it's ok from this side
How much delay do u have ?
hi.
using wma ringtones I get a response on my HD in about 1 ring after a soft reset. From the second call on the HD rings at about half a ring to the caller.
three rings from to wake from soft off.
but i forgot to say that if the phone is already "on", the delay is about 1/2 half ringtone, which is acceptable ! .
It seems that the additionnal delay (about 1 sec.) comes from the phone to go from "standby" to "on"
I've always had a delay with every HTC I've had (C500, C600. E650, Touch HD) using standard and custom ROMs with ringtones as WAV's and MP3's on the device and the storage card. I got used to it ages ago and if the phones on my desk can now predict an incoming call before it rings
Hi,
I was also searching for a solution on the ring tone delay issue. Guess that is a winmobile thing.
However there is no delay if you switch off the ring-tone and enable vibration mode only. That is weired behavior of the phone cause why cannot the ring-tone sound as fast as the vibration comes in vibmode only? And why does the vibration comes as late as the ring-tone when in combi-mode?
I am afraid there is no solution so far...
Regs!
this delay is something you'll have to learn to live with, unfortunately. at least in europe people seem to be finding loud and/or dodgy ringtones not very nice, and when dealing with the wiindows mobile vibrate mode is the one to go for.
another suggestion is to set up a caller tune, people are more likely to wait longer when they're listening to music.
ive found i can get it to ring at 1 ring if i turn off caller id pictures on s2u2
Yeah, the operating system does all the checks and clearing up before handling the call to prevent dropping, the way WM handles things, you can't get way from the delay, slowing the CPU with app like a nuedynamicclock worsens it. Well I notice a call before it rings if it is on
SlakerBoi said:
this delay is something you'll have to learn to live with, unfortunately
Click to expand...
Click to collapse
All my wm devices have had this issue. My blackstone lights up from sleep a good 2 to 3 sec. before the first ring. I use the old phone ring tone and have four fairly well spaced rings before vm kicks in. I just count the rings as I get to the phone and it has become a non issue. The hd tweek for it seemed not to have an effect btw. Also I'm with t-mo usa and using their code I have my ringtime set to max rings. which is 30 sec. before vm.
Hey there guys,
So I've noticed the oddest thing, You know how you can lower your ringer volume by just clicking down as many times as you want until it is on vibrate then finally silent. Well on mine it doesn't. I can click the down volume button a few times and the meter shows the yellow bar decreasing, yet when the phone rings it is still on full blast. The only thing that works is full blast, vibrate and silent which is strange and inconvenient when I'm in public because I don't want to put it on vibrate or silent, I just want to lower it a bit so its not so startlingly loud in public. Is anyone else having this issue?
Thanks,
Haven
This bug has been around since the TP. No idea why it has migrated operating systems..
Anyhow, try this. Set your notification volume to max. Wait a few seconds, and go into your notification tones and play one. Immediately after it has finished, play it again. Notice the first time it played, the volume was substantially quieter. The second time it played, it actually used max volume as per your setting.
This greatly effects notifications with just a few bytes of sound and not an ongoing ringtone. An ongoing ringtone will begin quieter than full, and then pick up to full volume or whatever you have in your settings but the first few sound bytes will always be quiet.
If you have notifications set for text or email, you will never hear your notifications at full volume unless it`s an ongoing ringtone (and who the hell wants that!).
I cant believe this hasn't been addressed yet. I have already tested this with three stock DHDs (but none with any custom roms.)
After my meeting with the regional HTC rep this week I will load a custom ROM onto my DHD and test further.
Feel free to post your findings! Would like to know if this issue is present in custom roms as well.
EDIT: Initial problem (/w TP2) discovered here: http://forum.ppcgeeks.com/htc-touch-pro-2/80017-speaker-volume-quiet-then-loud.html
I have just tried what your talking about.
but it doesnt seem to happen on my phone..
My phone was set to silent, then uped it to max,
went to my sound settings - notifications, selected the one i usually use,
sounded normal..
tapped it 4 more times.. no difference.
I think I know what you mean, at the home screen if you use the volume rockers and kee increasing, I can hear the volume getting louder as I press even when the volume on screen bar is at max.
I found that even at max it was still too quiet. I got my tones into SoundForge and increased the volume by like 50% and its nice and loud now
SiqMawsh said:
I think I know what you mean, at the home screen if you use the volume rockers and kee increasing, I can hear the volume getting louder as I press even when the volume on screen bar is at max.
I found that even at max it was still too quiet. I got my tones into SoundForge and increased the volume by like 50% and its nice and loud now
Click to expand...
Click to collapse
That's definitely something to consider.. good idea, I need to try that!... We're you able to do this with notification tones or just ring tones?
Just to note if you keep pressing the notifications you won't hear a difference, its the very FIRST sound that comes from the speaker will be quiet after a short rest of a few seconds.
Turn off the screen as well.. wait a couple of seconds, turn it back on, play a sound and then play it again and you'll notice that the second time it plays is a lot more audible (playing at max volume).
I just increased the volume on a ringtone(mp3) I want and put it on the sd card, and selected it as my ringtone. I did the same with a tone I wanted as my sms, but saved it in the notifications folder. I've only done it with my ringer and sms tone so far. Temporary fix but if I'm trimming my tones on my pc I can increase the volume as well, hopefully I don't have to keep doing it for long. I haven't tried the roms with volume fixes yet.
Using Revolution 4.0 and seems to be working fine.
Just wanted to post back. After rooting and roming the issue definitely has not ceased. I've learned to cope and will eventually make some tones that have amped volumes with some PC apps.
Still annoying though.. tested on 9 DHDs so far. Not one didnt have the issue. Ugh.
hey all,
a while ago, suddenly one day without notice, my phone started behaving funny when receiving an incoming phone call.
Often, the Phone App's GUI wouldn't appear in the foreground. the phone would ring and vibrate properly, i could silent the ring with the volume rocker, but i have no way to answer the call. i know when it is finished ringing when i can see the missed call notification in the notifications bar.
also, during the ringing, i can continue using the app that was already in the foreground, the home button is disabled, and the notifications shade is disabled (cannot be pulled down)
i have no idea what i did to cause this (maybe playing with Handy Call?) and no idea how to get out of this state.
the worst part is, it seems to be random, i have no idea why it happens sometimes and not others. it is super annoying. ive actually started assigning specific ringtones to important people so i know immediately who is calling.
any one encounter this? any ideas?
xt907 running stock Rom 183.46.10, rooted, unlocked