Reassign (Hard)keys Home and Back - Touch HD General

Hey guys,
is there a way to reassign the hardkeys home and back?
I also have an item "Buttons" in the settings but there is only one key defined: "Key 1 (Hold), Voicedial settings".
However, I can't find this button, where is it?

It's the first button i.e phone pickup, hold it and it will give you the voice dial

Key 1 is the dial key (far left).
You can reassign the back key with AE Button Plus. I'm not sure that you can remap home.

use AE Button Plus to reassign the keys, words great on my touch hd. I read somewhere that Home button is not supported due to different driver implemented by HTC

Thanks for your replies.
I'm aware of AE Button Plus but the interesting thing is the reassignment of the home key.
I wanna keep the back key as it is and assign an ok/close task to the home key because the end call button actually does the same thing as the home button namely go back to the today screen when you have a running application in foreground.

In AEB+ I have the following:
Button 1 (hold)
Windows Key
Enter/Action
Volume Up
Volume Down
Green Phone Button
Red Phone Button
Left Softkey
Right Softkey
Up Arrow
Down Arrow
Left Arrow
Right Arrow
I can access the volume up and down keys but which key is the back key?
I assume the green and red phone button is pickup and hangup key respectively?
Is there a way to access the power key at the top?

ez2remember said:
...but which key is the back key?
Click to expand...
Click to collapse
The back key is "Enter/Action".
It seems that the home key as well as the power key cannot be reassigned.

Back and home key can be reassigned on a window by window basis in the registry. Not particularly useful, but better than nothing.
V

What exactly needs to be done in the registry to reassign the home key?
Even if I have to enter a new registry key for any program window I might use it is worth the effort (at least for me).

gacowarlock said:
The back key is "Enter/Action".
It seems that the home key as well as the power key cannot be reassigned.
Click to expand...
Click to collapse
I just want to update:
the back key is not the "Enter/Action" key. i have tried to edit this button and it didn't remap to the Back key.
If you go to File -> Add Button, and tap the Back key, it will recognize the key as button #405C. I have remapped it to "Close Active Application" and it worked.
i don't think u can reassign the Home key as AE Button Plus cannot access the Home key.

I was also unable to change the Home key in AEBplus.
Concerning the back key assignment with AEBplus, I was trying to assign something to the long press but unable to get it working. No problem for single press and double press.
Anyone has better luck?

vijay555 said:
Back and home key can be reassigned on a window by window basis in the registry. Not particularly useful, but better than nothing.
V
Click to expand...
Click to collapse
So how do we go about doing that vijay555?

Power Key
Here's the modified power key from Diamond but it can be used on HD.
When Power key on long-pressed, it will display the menu for choice. Tested.
Regards,
KCJ

just tested on Aeplus 2.6.6.1, the Back key = the Ok key, it can be remapped.
I have it set to:
Single press="Ok/Close"
Double press = S2U2
Long press=close active app
EDIT: Long press doesn't work... might try another method.

don't know if this works, but it is worth a try:
if you copy a shortcut to \Windows and name it "Short_Power.lnk" you can intercept the short power key press. at least that worked for me on my diamond.
you could try s.th. like "Short_Home.lnk" but that would intercept the "other home key" (which manages the cursor's position like end, up down, left, right, etc).
the magic would be to find the correct name of the key.

longpress back key (405C)
I know this is an old thread, but I haven't found yet a solution.
I'd like to be able to add longpress back key (405C) to the key menu on the windows config.
I've found the registry key that HTC uses to provide longpress send key, but I copied with no luck.
Anyone knows how to do it? vijay555 has said it's possible but never indicated how...

Related

Poosible to map start menu to a soft key?

I know you can map the start manu to any of the hard buttons but I would like to map it to one of the soft buttons under the screen.
I know how to map the soft buttons to any application but I'm not sure how the start menu is called.
In the "Buttons" setting at "2. Assign a program:" you have to scroll up the list to the entries in "<...>". Those are the various assignable system features. One of it is "<Start Menu>".
For instance I assigned "<Start Menu>" to the Voice Dialer button and
"<OK/Close>" to the Internet Explorer button - very handy....
I want to assign it to one of the soft keys, not one of the keys you can map in "buttos"
Hi everybody,
I made almost the same.
the pitty of this way, it's the hard it becomes to navigate with one hand.
The thing I try to changes is when I use the phone, to set up the arrow key to access to the "Call History" or the "Speed Dial numbers" like with the Blue Angel (QTEK9090).
Does somebody know how to do it?
I tried AEBPlus, which is a freeware app that allows you to map your harware buttons to up to launch up to 3 different apps each (one click for first app, 2 clicks for second, 3 clicks for third). BUT... its not yet designed for the Wizard, so it does not recognize the soft key buttons yet. It also does not recognize the Comms Button...
So when I installed, I mapped IE button to 1 click = "OK" and 2 clicks "IE" and the Messaging button as 1 click = "start" and 2 clicks = "Messaging"
For some reason it remapped my "Comms Button" to "IE" and as I cant see that button any more in "settings/buttons" I cannot change it back :shock: But I have "Comms" set up as one of my "Start menu" items, so I can get to it via the button I mapped to the start menu.
I e-mailed the designer to see if he plans to update it for the Wizard. The wizard is included on his compatibility matrix, so he may be planning to. If he does that and includes the "soft key buttons" and the "comms button" we would be set.
Perhaps anyone else thats interested could e-mail him too and see if he will update it for a "donation" from each of us..? Its Alexander at : [email protected]
Regards
Chris
try this....
Just load Smartskey. It gives you a lot of secondary functions for soft keys and buttons. I really like it because it has default settings to open the start menu on a long press of the left softkey button, and to do an ok/close on a long press of the right softkey button. It can also manage OMAPClock overclocking functions, if you drop a copy of that app in the same folder as Smartskey.

Which buttons can be assigend by AE Button Plus?

In AE Button Plus I only could assign the two phone buttons. What about the "Home Button", "Back Button", "Calendar" and "Contacts"?
The back button can be assigned. Assign things to the "OK-button" i AE Button Plus to assign it to the back button.
Great! Thank you very much.
Hi, here is a reply on AEB Plus compatibility with the HD direct from the developer:
---------------------------
Hello David,
Thanks, it is always nice to know if you find this utility interesting
As for your question: yes, BPlus is compatible with HD as well as any other PocketPC 2k3 / PocketPC 2k3SE / WM5/WM6/WM6.1 devices.
The problem I know on Touch HD:
- Home key may not be remapped due to driver implementation
- Long keypresses are not detected in BPlus for green/red keys and “back” button (button driver limitation).
- “Back” button corresponds to the “Ok” in button list so you will not need to add it via File->Add key but just re-define “Ok” button instead
- Backlight controlling will work in next BPlus release (should appear this week)
Anyway – just try and install BPlus to check if it will suit your needs before buying. It have very few “demo” mode limitations...
Regards,
Alexander
----------------------------
all keys except home key works great on mine
By "all keys" you mean:
- left phone key
- back key
- right phone key?
mirandolo said:
By "all keys" you mean:
- left phone key
- back key
- right phone key?
Click to expand...
Click to collapse
Don't forget the Volume Buttons (long-press DOES work for those two)
Hi guys,
I played around with AE Buttons for a couple of hous last night and here's my experience:
- Volume up/down - Work like a charm.
- Home buttom - Can't be mapped.
- Back key - Didn't realize it was mapped to the Ok button. I tried it out tonight. Works fine, but I'm not sure what action should I put in the single press configuration to preserve it's normal function. "Ok/Close" a suppose. Can someone confirm, please ?
- Green/Red phone - work fine in single, double and triple press
- Green phone long press is mapped by the driver to a virtual button called "Button 1(Hold)" (It's just at the top of the AE Buttons list) and by default launches the voice dial program (this is defined in the Settings/Personal/Buttons/Program Buttons)
- Red phone long press - This is a tough one. This button can't be captured unless you set "Lock device" in Settings/Personal/Buttons/End key. In this case it generates a key code and you can record it as a new key in AE Buttons. There's a catch though. When you map an action to single press, Lock program is no longer executed. Your selected action is executed, but immediately after that the device goes to the today screen as if you have pressed the Home button.
- Power button - Can't be mapped at all. I wish this was possible. I wanted to make long pressing the power button to soft reset the device directly.
Hope this info is useful. It took me a couple of hours and A LOT of soft resets to try all the possible combinations
triffonovm said
[- Back key - Didn't realize it was mapped to the Ok button. I tried it out tonight. Works fine, but I'm not sure what action should I put in the single press configuration to preserve it's normal function. "Ok/Close" a suppose. Can someone confirm, please ?]
Confirmed.
John R
triffonovm said:
Hi guys,
I played around with AE Buttons for a couple of hous last night and here's my experience:
- Volume up/down - Work like a charm.
- Home buttom - Can't be mapped.
- Back key - Didn't realize it was mapped to the Ok button. I tried it out tonight. Works fine, but I'm not sure what action should I put in the single press configuration to preserve it's normal function. "Ok/Close" a suppose. Can someone confirm, please ?
- Green/Red phone - work fine in single, double and triple press
- Green phone long press is mapped by the driver to a virtual button called "Button 1(Hold)" (It's just at the top of the AE Buttons list) and by default launches the voice dial program (this is defined in the Settings/Personal/Buttons/Program Buttons)
- Red phone long press - This is a tough one. This button can't be captured unless you set "Lock device" in Settings/Personal/Buttons/End key. In this case it generates a key code and you can record it as a new key in AE Buttons. There's a catch though. When you map an action to single press, Lock program is no longer executed. Your selected action is executed, but immediately after that the device goes to the today screen as if you have pressed the Home button.
- Power button - Can't be mapped at all. I wish this was possible. I wanted to make long pressing the power button to soft reset the device directly.
Hope this info is useful. It took me a couple of hours and A LOT of soft resets to try all the possible combinations
Click to expand...
Click to collapse
I encountered the below problem.
After receiving or making a phone call, the button did not work for around 5 minutes. Instead of move the arrow up or down, it turn the volume up/down. After that the button work again as what I had configured.
Anyone having the same problem?
Regarding the back key. I have this not mapped for one touch, i.e., normal OK operation, and for double press I have it rotate the screen.
I don't like gsen and the gyrator - great apps but I just don't need them always there.
dannyng said:
I encountered the below problem.
After receiving or making a phone call, the button did not work for around 5 minutes. Instead of move the arrow up or down, it turn the volume up/down. After that the button work again as what I had configured.
Anyone having the same problem?
Click to expand...
Click to collapse
I have this problem too! Any solution to share?
That's weird - I have just tested and all the AEB Plus assignments worked before a call.
After a call the volume assignments I have (1 press = arrow up/down, 2 press = volume up/down, long press up = flash lamp, long press down = resco audio) don't work. All the volume presses just revert to the volume operation.
I also have the back/OK key assigned to screen rotate for double press. This works fine after the call.
So, status now is not working right - I'll wait and see if it fixes itself (!!) with a few minutes.
Cheesy Dave said:
That's weird - I have just tested and all the AEB Plus assignments worked before a call.
After a call the volume assignments I have (1 press = arrow up/down, 2 press = volume up/down, long press up = flash lamp, long press down = resco audio) don't work. All the volume presses just revert to the volume operation.
I also have the back/OK key assigned to screen rotate for double press. This works fine after the call.
So, status now is not working right - I'll wait and see if it fixes itself (!!) with a few minutes.
Click to expand...
Click to collapse
I found the fix. In AEB + there is a set of options. One of these is the "restore volume slider" - by default this restores volume control to the phone app. It appears not to reset it back after.
I have just turned all these "restore volume slider" options off and now AEB Plus works as it should (or as I expect).
Thanks for the fix!
I shall try it tonite!
Cheesy Dave said:
I found the fix. In AEB + there is a set of options. One of these is the "restore volume slider" - by default this restores volume control to the phone app. It appears not to reset it back after.
I have just turned all these "restore volume slider" options off and now AEB Plus works as it should (or as I expect).
Click to expand...
Click to collapse
I just tried it and it doesn't work. I guess it's a bug and need to be fixed by the developer. Hmmmm, just suprised that no one really notice this bug.
Same bug on volume up. I assigned 1P for standard function and 2P for WiFi toggle. Well after the first or second use, it looses mapping. To have it to work again a soft reset is needed...
Cheesy Dave said:
I found the fix. In AEB + there is a set of options. One of these is the "restore volume slider" - by default this restores volume control to the phone app. It appears not to reset it back after.
I have just turned all these "restore volume slider" options off and now AEB Plus works as it should (or as I expect).
Click to expand...
Click to collapse
Thanks a lot mate! Works purrfect! had the same problem going on.
Insane Devil said:
Thanks a lot mate! Works purrfect! had the same problem going on.
Click to expand...
Click to collapse
I'm glad this is working for some.
But, I got an email from the developer (who is very quick to respond to emails) that said he is aware of a fault with the phone interaction and has not been able to replicate it.
Removing the volume slider option for the phone might work (as it did for me) but it seems that the intermittent fault probably will remain.
Cheesy Dave said:
I'm glad this is working for some.
But, I got an email from the developer (who is very quick to respond to emails) that said he is aware of a fault with the phone interaction and has not been able to replicate it.
Removing the volume slider option for the phone might work (as it did for me) but it seems that the intermittent fault probably will remain.
Click to expand...
Click to collapse
Glad that it work for you (so envy, hehehehe) and thanks for the email to the developer.
Wondering why some HTC HD working (removing the volume slider option) and some not (like my case )

any ideas for configuring home key and backspace key ?

any ideas for configuring home key and backspace key ?
i've tried with AE Button, but it doesn't work claerly.
or maybe there are somewhere regkeys ?
i don't think, that this is hardcoded somewhere .... or ?
some ideas ?
cu camel
As I know, the 'Home' key is not configurable in HD, not sure about the 'Back' key.
camro said:
any ideas for configuring home key and backspace key ?
i've tried with AE Button, but it doesn't work claerly.
or maybe there are somewhere regkeys ?
i don't think, that this is hardcoded somewhere .... or ?
some ideas ?
cu camel
Click to expand...
Click to collapse
The "back" key is mapped as "OK button" in AEButtons, and can be configured. The home one seems to be almost impossible to do as said by AEB devver
bbonzz said:
The "back" key is mapped as "OK button" in AEButtons, and can be configured. The home one seems to be almost impossible to do as said by AEB devver
Click to expand...
Click to collapse
the back key is not fully able to configure.
if you try to set : "left button" and then try the button always go to home screen and then "left button".
if you try it ex: under "programms" go to lnext left icon -> then it jumps back to "home" screen + left
cu camel
well - i'm trying to find out how to map the keys on HTC Blackstone....
here is also a interesting link: http://forum.xda-developers.com/showthread.php?p=3144390#post3144390
for now i know:
TOP:
Power Button can fully handled (short click + long click) via lnk file.
LEFT: (there are 2 buttons)
Can fully remapped via AEB Plus (1-,2-,3-short click, + long click).
BOTTON:
there are 4 buttons:
"Green Key",
-> mapping possible via AEB Plus,
but for long key you have to use: AEBPlus + Button: "Button1(Hold)" - don't ask me why, bnut it works on this way..)
"Home Key"
-> nothing possible !!!
"Back Key"
-> not really mapable (mapping possible, but always send to wanted mapping ~backspace and jump back to Homescreen and then the mapped button will execute - little bit strange ..)
Longpress also doesn't work
"Red Key",
-> mapping possible, but without Long Press
tried with aebutton also (last version)
some additional ideas ?
cu camel

Changing Home Button to Start Menu

Hi, Anyway to switch the existing HOME button on the HD to START button instead?
Thanks
is it AE Button Plus? I think that what I used, couldn't change the home button so I used the back button instead. You can set it up to handle more than one press too.
Not by using AE button program but by mod the registry. Is it possible?
No, you can't change the Home button.
Bump on this topic. Anyone know how to do this via registry? The home button and the end call button do the same thing on the HD and it's a waste IMO to not have a use for one of them.
Home button >>>> Start button would be awesome.

How do I go to home screen?

Hello,
I have 6.5.5 custom ROM on my device and trying to figure out how to navigate to home screen? I used Diamond before with dedicated home button but on this phone it does not have dedicated home button, so how do I do that?
Thanks,
G
artisticcheese said:
Hello,
I have 6.5.5 custom ROM on my device and trying to figure out how to navigate to home screen? I used Diamond before with dedicated home button but on this phone it does not have dedicated home button, so how do I do that?
Thanks,
G
Click to expand...
Click to collapse
just press the end call button. or you can go to start>settings>personal>buttons then set it to where one of the hardware buttons takes you to home.
Long Press End Key has 2 different tabs under Settings/Button. One on the settings application itself and another one under "program buttons". The one on the settings application itself overrides whatever I put into "Programs Buttons" for long hold of end key. Any ideas?
artisticcheese said:
Long Press End Key has 2 different tabs under Settings/Button. One on the settings application itself and another one under "program buttons". The one on the settings application itself overrides whatever I put into "Programs Buttons" for long hold of end key. Any ideas?
Click to expand...
Click to collapse
use long press of send key. just set it to <home>
I already reassigned long press of SendKey for communication manager, so I have only a choice either to have conveniens of 1 hardware key on Topaz effectively?
artisticcheese said:
I already reassigned long press of SendKey for communication manager, so I have only a choice either to have conveniens of 1 hardware key on Topaz effectively?
Click to expand...
Click to collapse
there is prolly an app for remapping the buttons,just do a quick search
The third hardware button (left arrow) gets you home, but doesn't close running programs.
Keys remmaper:
http://forum.xda-developers.com/showthread.php?t=555821

Categories

Resources