Hello,
Can't start my elf0100 (HTC Touch)
I can see smart mobility, that's all.
I tried to unlock it with an other article here.
(ELF-USPL - after that the device is down)
So i tried to flash some different ROMs on it, but nothing changed.
Any idea? - Maybe SPL ROM zone gone?
I searched a little bit in the forum, but i don't find a solution - too many answers - nothing helps (Hard-Reset, Softreset, Flashing...)
Help, please help
If u can enter the tri colour boot loader then try this link it may help
Recover HTC Touch from tricolors RUU boot-loader (Mtty)[ONLINE]
http://forum.xda-developers.com/showthread.php?t=347700
Thanks for this thread, i will try this, bootloader is no problem.
Related
hi
please how can i do bootloader mode i have an herald bloqued in spl ipl cause try to flash with awizard
now in downloaded some rom and can't flash it cause no connection
please how can i do bootloader mode
thanks
there is no more information in Wiki only this one - http://wiki.xda-developers.com/index.php?pagename=Herald_BootLoaderPassword
i did it
bootloader = holdon camera button and reset with stylus
hard reset HTC 4350
Hi guys,
I've tried all your crazy combinations of hard reset my HTC 4350 [aka Herald] and none really did anything! [beside the provided app.]
Can anyone of you enlighten me:
1. do i need to unlock my rom or smth??
2. can i get read of the original green theme stored in ROM after unlocking my CID?
10x a lot in advance,
C. Marius
c_marius said:
Hi guys,
I've tried all your crazy combinations of hard reset my HTC 4350 [aka Herald] and none really did anything! [beside the provided app.]
Can anyone of you enlighten me:
1. do i need to unlock my rom or smth??
2. can i get read of the original green theme stored in ROM after unlocking my CID?
10x a lot in advance,
C. Marius
Click to expand...
Click to collapse
Hold the 2 soft keys down while resetting the device... hold them down until a white message on dark screen appears.
Ciao.
help me please im nearly cryin' i tried to flash my herald to wm6 now i got i white screen and its there after Hard reset
Take your time to read around in the threads of the Herald forum. Your device could be bricked (probably.. srry)
Dear All,
Help Required,I m Trying To Load Hard SPL From Diamond.After Load My
HTC Juno is dead & Couldnot Start in Bootloader Mode.
Please Help Me To BootLoading Again.............................
I'm sorry, but I don't think it's possible. You're not supposed to use the HardSPL from one device to the other because it is meant for that specific device and only that specific device. You probably have bricked it.
The only thing you can try is to attempt to start the bootloader mode. Hold down the camera button while turning on the Juno and keep holding it after you've released the power button. If the 3 color bootloader screen comes up, you can flash the official T-Mobile ROM, but I don't think that's possible because you tried loading a Touch Diamond SPL onto it.
Thanx ND4SPD,
I Tried To Enter Bootloader Mode But Failed.
Any Advice will be appreciated.
you have to try JTAG mode
tramuyo,
Thanx For Reply.
What is JTAG? How I Use It? Please?????????????????
am using artemis p3300 but when i flashing uspl at 99% it shows upgrade failure now pda will be dead i cant go bootscreen too is any solution to back to boot screen? help me
Hi,
what do you mean by bootscreen? Windows boot screen or Artemis' bootloader (tri-color screen)? First of all I would try a hard reset, here's how to: http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
Did you try to flash USPL with this? http://forum.xda-developers.com/showthread.php?t=311403
You should at least be able to enter bootloader..here's an interesting thread:
http://forum.xda-developers.com/showthread.php?t=306904 .
Sorry I can't help more, i never experienced a similiar problem but I'm really curious to see it solved, waiting for some guru to help
sorry sir if i put battery inside pda will be start heating i cant switch to tri colour bootscreen havent money to buy a another pda am going to mad and am a looser.
Use MTTY to reset flash, the install the official rom for your device.
device never switched on is there any way to switching power on my device htc artemis p3300
bricked artemis goes mtty to reset the flash please give link here
how can i mtty to reset my bricked artemis please give me the link to download the file.
I updated the original ROM to wm 6.1, cause the old one was Spanish. After this it worked for 30 minutes, but then it made re-start every 5 minutes. Turned it off, but cannot turn it on again. The first screen with Vodafone comes up, then it shuts down again. I can enter bootloader tricolor mode, but there is no RUU on the right corner, just two version numbers on the left side. Please help! Tried soft and hard reset, didnt work.
what it shows on boot loader mode ???????
don't worry just unlock and update spl , ipl
and then flash with any good rom ( not official rom )
i would suggest u to flash with onyx_6_release13 .
best of luck .
How do I unlock it, if it wont turn on, a cannot connect it to my PC?
I will make a screeshot from the bootloader screen.
Thank you in advance.
Ok, now it works. Used the method of dsixda. Worked fine.
hi
I have got a bricked HTC ELF with a tri-colour screen.(red, green and blue). I did try matty.exe and found that cid is locked. g_cKeyCardSecurityLevel = FF
I dont have the original firmaware backed up. and could not find anywhere on this site and internet.
device id: ELF010050
cid: HTC E11
IPL 1.17.002
SPL: 1.17.0
any help or suggestion plz?
regards
gogagogi.
Read all the stickies, it is covered in there. Don't hijack threads, and post in relevant sections please.
HTC ELF doesn't turn on.
I was flashing my Elf with Micro-SD method and when it get to flashing BINFS the phone just turned off . No Orange Led, no boot-loader mode, no hard reset can be done with it...
What could be the problem??? Can anyone give an advice
Best Regards VeNtilY.
hi
I have got a bricked HTC ELF with a tri-colour screen.(red, green and blue). I did try matty.exe and found that cid is locked. g_cKeyCardSecurityLevel = FF
I dont have the original firmaware backed up. and could not find anywhere on this site and internet.
device id: ELF010050
cid: HTC E11
IPL 1.17.002
SPL: 1.17.0
Problem? Sounds like you didn't have full battery when flashing, and now your phone is bricked.
If you have some interest in doing so, you can always try JTAGing (check my sig) and that should help. Fairly complex i guess though. The thread is a bit messy, but I wanted to keep it so people could track through the thought process of what I was doing, and then when help came from another member (bombom81) how we got it to work on his phone.
gogagogi.
Read all the stickies, it is covered in there. Don't hijack threads, and post in relevant sections please.