I've posted a quick review of the Brodit Swiveling Passive Car Holder for the Treo Pro, along with some photos.
Just got one for my Z4, passive holder and car adapter.
Excellent fit, holds the phone very well.
Very happy.
Related
It's the Orange M600 variety and it's unlocked.
I fitted a brand new housing as the old one was a bit scratched and I've fitted a Motorola rear speaker as the original HTC one was hopeless.
Oh and I've included a desk cradle, Brodit passive car cradle, a 1GB SD card and a set of Seido headphones. None of the fit my Hermes.
If you're interested click the link in my sig. I'll remove it when sold.
Cheers,
hey guys, just thought some of u would like to know. i just bought a universal windshield mount for my kaiser from best buy for $30.
http://www.bracketron.com/xmain/phw203.php
it works awesome and the nicest thing is the long arm, so u can have it close to u and not have to reach far
u can buy it here off the best buy website:
http://www.bestbuy.com/site/olspage...etron&lp=7&type=product&cp=1&id=1138084373352
good luck
omar
Custom windshield mount forTreo fits Tilt perfectly
The Igrip custom unit for the Treo fits perfectly. The universals are a problem as the "ears" tend to move apart, dropping the phone. Here's a link for their high-end unit for $29. They also make a custom unit with a gooseneck (actually a thick aluminum wire covered with a sleeve) for $19.
http://shop.treonauts.com/content/accessories/3-78--1781.htm
Kaiser Windscreen Mount
I've previously used the Artemis and now switched to the Kaiser.
The Artemis package comes with a car windscreen mount that has a holder fitting the Artemis to a T.
Came across this website that has a holder which could be replaced to fit the Kaiser to a T. URL as follows -> http://www.mobilefun.co.uk/product/14751.htm
However, it's only available in UK. Anyone knows if it's available in Singapore?
i'm looking for a carmount that doesn't involve a suction cup.I'm really looking for something that can be clipable to the air vent and be able to handle weight since i primarily use an extended battery
Update. I found this instead http://www.proclipusa.com/?sectionp...tegoryid=&p_year=&p_countryid=0&p_leftorright=
I got one aradio shack for $15 that works great. Clips into vent and adjust in size to grip from sides. Charger still fits while in cradle too. Kevin
The one I use is a $9 one from wal-mart. it clips to the air vent & has adjustable sides w/ a space on the bottom for chargers.
Do you like the one from walmart?
Pro Clip is where its at
I bought this set, Everything works great especially for the price.
My first plastic case had the issue of one corner not fitting right, so i contacted them, and they sent out a new one the next day. Fit perfectly.
But it has the car cradle, and a very nice leather holster that holds the phone snug.
amazon has a ginormous variety of all types of holders. i got one a few weeks ago that comes with windshield mount and is also interchangeable to the air vent. also some that are actually custom to the phone for a little more $ with a charger port built in.
hi,
ive been looking araund to finde some nice car holder, but could not find. maybe somone has boght anything on ebay that fits god or sovhere else.
Here you can find a car holder
http://www.brodit.se/?main=searchbrodit.jsp&search=xperia
/Jorgen65
I use the cheap car kit from Wilkinson's in the UK which holds the phone really well, and I have a Motorola mini usb charger for in the car too.
Try the one from Clas Ohlson. Works really good as long as you dont need the keyboard.
BE CAREFUL!
The Brodit holder is Scratching the X1's chrome frame!!!
I've used only twice and already there are two little black spot on the both side. Not worth it!
Hmm I have the Brodit active holder in backorder..
Are there more people experiencing the scratching problem?
Is there a good alternative carholder?
I am just using the Nokia Universal Holder CR-39 with the Easy Mount HH-12 that mounts on my windscreen. Some people might not like it but it is a pretty good solution for me.
I bought it when I had the Nokia n95 phone (used it for 1 year already) but it holds many phone perfectly (imate JASJAM, n95 that I have tried)
The x1 is not exception too, and it shouldn't cause any scratch since there is some soft foam on the side of the "holder".
Only down side is it might be relatively expensive compared to other kit.
I don't like the windshield mounts.
The Brodit is perfect because it's mountable on your dashboard without scratching it. And you can use the keyboard while it's in the holder.
I'm afraid there isn't an alternative.. So I hope the Brodit scratching problem is a hoax (maybe the person using it wasn't very carefull?)
I'm getting mine from brodit on thursday. I really hope it doesn't scratch the chrome and that it was just that one holder that's defect.
I'll let you know if there are scratch tendensies..
I got my Brodit today and installed in my car.. and I can say it doesn't leave scratches on my phone.
Idon't se any scratches on my phone yet, and I've been quite brutal dragging the phone in and out of the holder alot. I would like to see how big the actual scratches are. Can vax6 post any pics of the damage?
Can you order directly from Brodit ?
I would second the choice of brodit.
the problem for me though, is that I change phone frequently, so it's not economical for me to get a new brodit holder every time I change phone , so what I did was get my old ipaq 6965 holder, and add padding to the side of it, and the thickness will vary depending on the phone I have, and I have a OEM looking holder w/o having to spend a bomb each time I change the phone. (although, I reckon not changing phone so often would be the solution)
Brodit holder
I haven't notoced any scratching on phone although I have thought that it is a tighter fit than brodit holders I have had for other phones. The other flaw is that the holder covers the speakerphone which is not the loudest in the world on the X1 anyway.
Does anybody knows some good car holder for nexus4. Vent holder is preferable.
I can find only universal ones.
I have always been a big fan of RAM Mounts due to the quality and variety of arms and bases. I used to use their dedicated device cradles for my devices, but their new XGrip universal cradle is genius. Easy in and out, super strong grip, and will never mark your device. All I use anymore.
http://youtu.be/kUh08JQNFv4
Brodit mounts. They're pricey but once you try them you'll never go back:
http://www.proclipusa.com/default.a...e_holder=false&p_pageid=1&dtype=&leftorright=
The Mountek looks really tidy with the Nexus 4 and is very well built. I'd give up on your concerns for a dedicated mount.