I just got a Treo Pro recently and love it, but my only issue is getting the GPS to work. I've scoured the forum here but still couldn't get to work. Would like to fix or I'll have to return. Can anyone help?
I started up google maps, clicked "use GPS" but it consistenty reports that it can't find any satelites after several minutes outside. After reading through threads here, I've tried installing a few GPS tools such as GPSToday, GPS Viewer and HTC GPS Tool and none of these can find a satelite either even after a long wait with clear line of sight to the sky.
My settings are the defaults out the box and are as follows -
External GPS settings:
GPS program port: COM4
GPS hardare port: (none)
Baud rate: 4800
Windows Manage GPS automatically enabled
Google Maps GPS setting - Managed by Windows
Any help much appreciated.
problem with GPS
I remember reading somewhere in other forum that if your phone was from Egypt the GPS was disable from the registry and couldn't make it to work, because it's illegal or something like that.
The settings are correct, there should be on com4:com4.. although haven't check the bps on mine.. have you tried to change it to something else?
anyway here's a link where you can check if your gps is disabled in the registry of the phone...
http://discussion.treocentral.com/showthread.php?t=174029
you could probably check that out...
obviously modify your registry at your own risk...
hope it works...
I would google that GPS program called GPS Test. you should be able to find it right here. Use that program to see if your GPS is working correctly. Its as simple as runninig it when your outside. It will start picking up sats and give you a visual indication of how many and if they're locked on.
As long as I run Quick GPS (built into the treo) I can get a lock pretty quick, maybe 30 seconds or so. Its possible your gps could be defective.
simeonfishman said:
I just got a Treo Pro recently and love it, but my only issue is getting the GPS to work. I've scoured the forum here but still couldn't get to work. Would like to fix or I'll have to return. Can anyone help?
I started up google maps, clicked "use GPS" but it consistenty reports that it can't find any satelites after several minutes outside. After reading through threads here, I've tried installing a few GPS tools such as GPSToday, GPS Viewer and HTC GPS Tool and none of these can find a satelite either even after a long wait with clear line of sight to the sky.
My settings are the defaults out the box and are as follows -
External GPS settings:
GPS program port: COM4
GPS hardare port: (none)
Baud rate: 4800
Windows Manage GPS automatically enabled
Google Maps GPS setting - Managed by Windows
Any help much appreciated.
Click to expand...
Click to collapse
Does running the "QuickGPS" program make any difference?
Quick GPS???
I just got a Treo Pro from Alltel and it didn't come with Quick GPS.
Any suggestions?
Thanks,
K
I have an Alltel Treo and I had a GPS location problem until I changed the location settings from 911 only to allow other programs and services to locate me.
Under Settings > Phone > Services > Location.
denada777 said:
I just got a Treo Pro from Alltel and it didn't come with Quick GPS.
Any suggestions?
Thanks,
K
Click to expand...
Click to collapse
I am interested too. My Sprint Tero Pro did not come with Quick GPS.
Strange, Sometimes mine doesnt work, so i unselect 'Use GPS' from google maps. Than i start up Google maps again and select 'Use GPS' and it magically works.
GPS on Alltel Palm Treo Pro
There is not internal GPS on this phone with Alltel. You must have a Bluethooth GPS reciver and configure it in Settings/External GPS. This may be becauser thye want to have you use Alltel Navigation at $10 per month.
[email protected] said:
There is not internal GPS on this phone with Alltel. You must have a Bluethooth GPS reciver and configure it in Settings/External GPS. This may be becauser thye want to have you use Alltel Navigation at $10 per month.
Click to expand...
Click to collapse
The alltel unit does have the GPS, it's just deactivated. They are trying to force you to use their paid application. I'm trying to figure out which registry keys need to be modified.
Can somebody dump their reg settings for an unlocked unit so we can compare?
Thanks!
ConRadical said:
The alltel unit does have the GPS, it's just deactivated. They are trying to force you to use their paid application. I'm trying to figure out which registry keys need to be modified.
Can somebody dump their reg settings for an unlocked unit so we can compare?
Thanks!
Click to expand...
Click to collapse
not registry issue for alltel. they have shipped it with location setting defaulted as off.
it's simple:
Start Menu->Settings->Personal-> Phone-> Services-> select "Location Setting" ->press Get Settings button-> scroll down, ->select 'OK"
jtraveler said:
I have an Alltel Treo and I had a GPS location problem until I changed the location settings from 911 only to allow other programs and services to locate me.
Under Settings > Phone > Services > Location.
Click to expand...
Click to collapse
Thank You, Thank You, Thank You,
That got my Alltel GPS working!
For the life of me I could not figure out what the hell the problem was. Why would Alltel ship it like that?......dicks.
aero1 said:
not registry issue for alltel. they have shipped it with location setting defaulted as off.
it's simple:
Start Menu->Settings->Personal-> Phone-> Services-> select "Location Setting" ->press Get Settings button-> scroll down, ->select 'OK"
Click to expand...
Click to collapse
Mine was disabled in the Reg. I wonder if i got a different rom version.
Maybe that gui option modifies the registry entry ;P
Palm not initiating
I found this way works using one to initiate the GPS which my Palm doesn't seem to do and then run map software.
http://www.easyreadarticles.com/?p=87
Cheers,
phil
i just posted an explanation on treo central about how to add quick gps to the cdma (sprint,alltel,verizon) treo pro check it out http://discussion.treocentral.com/showthread.php?p=1670807#post1670807
I'll second jeremyspencer's link there. works like a champ on my Alltel Treo Pro.
Your settings are correct. My phone has similar problems unless I use the QuickGPS program. It will work without the QuickGPS but it can take up to an hour to get a fix. With Quick GPS it's about 2-5 minutes
Change registry value for the GPSLockWorkaround from 0 to 1 to enable the gps.
It can be found at:
HKEY_CURRENT_USER\ControlPanel\PhoneExtendFunction\CDMA\GPSLockWorkaround
Related
Hi All
I have performed the reg edit that enables the WM5 GPS App - I also know from threads that it is intended to allow multiple pocket pc applications to use the same GPS. Can someone explain how to use the various settings?
In particular, what is the effect of the different GPS settings on the tab labelled "programs" and that labelled "hardware"? And in what circumstances should one uncheck the "manage GPS automatically box" on the "access" tab?
Many thanks
Chris
WM5 GPS Application
Hi Chris!
I have an O2 XDA Mini S and i am missing the GPS Menue in WM5 and i think it would be helpfull in connecting with my GPS Bluetooth receiver.
It sounds that you know how it is activated so that i can try some changes. Would be nice to hear from you.
Thanks in advance
Carsten
http://forum.xda-developers.com/viewtopic.php?t=36540&highlight=gps
ßeta said:
http://forum.xda-developers.com/viewtopic.php?t=36540&highlight=gps
Click to expand...
Click to collapse
Hello,
I tried your soluce but it doesn't work on my Qtek9100 (Orange SPV M3000). The registry key is changed as shown, but after a soft reset, the "redirect" key reappears and my modifcations are not applied.
Does anyone have an idea ? :roll:
you must make sure that the changes are saved after the registry changes
otherwise as you say nothing happens
Jean,
I had the same thing, couldn't get it to work.
But using PHM regedit and saving the changes it finally did work.
The DWORD “hide” wasn’t in my Qtek.
Cheers
Is anybody able to help with my original question?
Hi All
I have performed the reg edit that enables the WM5 GPS App - I also know from threads that it is intended to allow multiple pocket pc applications to use the same GPS. Can someone explain how to use the various settings?
In particular, what is the effect of the different GPS settings on the tab labelled "programs" and that labelled "hardware"? And in what circumstances should one uncheck the "manage GPS automatically box" on the "access" tab?
Many thanks
Chris
Click to expand...
Click to collapse
lskb: I don't use GPS and don't have one, but I enabled the GPS settings page anyway.
It seems fairly descriptive to me, but I would guess, the Programs page basically deals with programs that have difficulty connecting to certain com ports (ie it's used for com port redirection).
So eg, if TomTom MUST be configured to a GPS receiver on COM2, set your settings in the Programs tab to COM2.
Hardware is the actual "physical" com port the gps receiver is linked to. Again, depends on your bluetooth setup/hardware pairing. But eg if your GPS receiver is connected to COM4, set this to COM4. Baud will typically be dictated by your software/hardware setup.
Access is for apps that don't like sharing the bluetooth/GPS receiver. Leave it as it is, ensure the first two tabs are correct, and if you're having troubles but you're certain they're Tab 1 and 2 are correct, or you know for a fact other people have found it helpful, untick the Access checkbox.
V
Vijay
Thanks for that, but I have a question. When you say hardware, you mean something phyiscally connected to the Wizard or by a bluetooth connection? If you mean the latter, then I am not sure that that is correct as the range of selectable baud rates looks wrong.
Thus, my bluetooth gps is installed on an outgoing com port 6 in the bluetooth settings area. The baud rate specified for my gps is 38400. Am I supposed to set the hardware com port to 6 (despite the fact that it is already set in the bluetooth area)? And if yes, how do I set the baud rate, as 38400 is not capable of selection....
Chris
Jean,
I had the same thing, couldn't get it to work.
But using PHM regedit and saving the changes it finally did work.
The DWORD “hide” wasn’t in my Qtek.
Cheers
Jean,
I had the same thing, couldn't get it to work.
But using PHM regedit and saving the changes it finally did work.
The DWORD “hide” wasn’t in my Qtek.
Cheers
well, i have exactly sam eproblems like Iskb. I set the hardware port to com 6. (Vario and Navilock BT unit). Then, when i am trying to connect to my BT module, there is no chance to establish the connection at this given port. I am forced to choose another one (ie COM7). I thought that the GPS manager would work in some way like GPSgate do, but it seems not to be true
make sure in the original com port area the bt modem is not listed on any port,
after you have enabled the com port in the new gps icon and then selected it in the navigator software, change the new gps icon port back to none, and then you can create a "New Outgoing Port" using the original com ports link.
hope this makes sense to somebody :?:
hi have tried all sugestions on the forums but still no lucck im using tomtom 6.02. could someone be nice enough to post directions to how they got it working step by step thanks.
1) Installed WM5torage.
2) Copied my CAB files to the Microdrive root.
3) Installed each of the cab's, pointing them to the Microdrive.
4) Let TT reboot the device
5) Copied a 'new' executable to the correct location
6) Started TT
7) Ran the setup routine (Language, Units e.t.c)
8) Selected the Map
9) Set my 'home' location
10) Navigated away.
Only problem I had was getting the voices working (as noted on another post). But a different build cured that problem. I'm using 6.010 though. I've used com4 and (after setting up the GPS module) com 1, which both work quite well.
what do you mean you Copied a 'new' executable to the correct location how do you do that thanks
moh6299 said:
what do you mean you Copied a 'new' executable to the correct location how do you do that thanks
Click to expand...
Click to collapse
He's talking about a crack!
Out of interest, how did you set up the GPS? Having issues with mine!
I might have been, not that I can approve of such activities of course! You must always buy licenced software!
I've got my GPS set to 'Other NMEA GPS Receiver', Baud Rate 115200, Com1.
I've previously used the same settings on COM4, but then I've activated the GPS applet within WM5 to map the port to other applications, so I can use TT or Windows Live! Maps with Reperion Tracker. But I'm sure the first time I installed it, it detected the GPS straight away anyway.
sory but could you pm me how you did this I've activated the GPS applet within WM5 to map the port to other applications, so I can use TT or Windows Live! Maps with Reperion Tracker.
Every time I start Garmin, it changes my xv6800's clock to 4pm. I thought I'd write a mortscript to check the time, start Garmin, then re-set the time to the correct time. Unfortunately, I didn't see a SetTime function in Mortscript. Does anyone know of another way to do this? (Or even better, why Garmin XT does this?) -Scott
There is a thread with almost the exact title floating around here
I have the same issue. It seems to only reset the clock/date when you don't have a gps fix within a few seconds. I use gps viewer to get a gps fix first and then open it and don't have any issues. I haven't found a better way yet.
It is an unfortunate reality of using Garmin Mobile XT
Finally fixed it!!!
SysWiz said:
Every time I start Garmin, it changes my xv6800's clock to 4pm. I thought I'd write a mortscript to check the time, start Garmin, then re-set the time to the correct time. Unfortunately, I didn't see a SetTime function in Mortscript. Does anyone know of another way to do this? (Or even better, why Garmin XT does this?) -Scott
Click to expand...
Click to collapse
I fixed mine!!!!
Just went into Start>Settings>Personal Tab>Phone>Time Zones Tab, and Un-Checked the "Auto change time zone and clock" box.
There is no problem for me because in my country (Costa Rica) we don't have time change due to change of season, it's always the same.
I don't know why MS put this option there. I think that the place it corresponds is in Time Settings or Regional Settings, but in Phone Options???
Still don't know why Garmin XT is the only one program that does this thing.
No more clock/date changes for me!!!
I hope this can solve the problem of many of you, since there isn't a reasonable solution yet.
I've been searching basically all day (although I should be working heh) but I'm trying to get Google Maps working properly on my HTC Touch HD (from UK). I'm in the US, on AT&T, but cant seem to get Google Maps to use the built-in GPS.
Here are some things I've done and tried... any help or redirects to where I can find some answers would be very appreciated...
* Changed Google Maps to use COM4, 4800...
* Changed 'External GPS' to be COM4 (GPS program port), none & 4800 for Hardware, and in Access 'Manage GPS...' is selected
* Under my Phone settings I dont have the "Location Setting" to turn on/off (do I perhaps not have the right radio or other ROMs?)
Some phone stats:
* ROM version: 1.14.405.3 (22273) WWE
* ROM date: 10/24/08
* Radio version: 1.09.25.14
* Protocol version: 52.49a.25.26U
Thanks for any suggestions...
Cheers,
Dustin H
kzw2zx said:
I've been searching basically all day (although I should be working heh) but I'm trying to get Google Maps working properly on my HTC Touch HD (from UK). I'm in the US, on AT&T, but cant seem to get Google Maps to use the built-in GPS.
Here are some things I've done and tried... any help or redirects to where I can find some answers would be very appreciated...
* Changed Google Maps to use COM4, 4800...
* Changed 'External GPS' to be COM4 (GPS program port), none & 4800 for Hardware, and in Access 'Manage GPS...' is selected
* Under my Phone settings I dont have the "Location Setting" to turn on/off (do I perhaps not have the right radio or other ROMs?)
Some phone stats:
* ROM version: 1.14.405.3 (22273) WWE
* ROM date: 10/24/08
* Radio version: 1.09.25.14
* Protocol version: 52.49a.25.26U
Thanks for any suggestions...
Cheers,
Dustin H
Click to expand...
Click to collapse
I am using AT&T in San Diego and have no problem with GPS
and Google Maps. I have not changed any settings.
kzw2zx said:
I've been searching basically all day (although I should be working heh) but I'm trying to get Google Maps working properly on my HTC Touch HD (from UK). I'm in the US, on AT&T, but cant seem to get Google Maps to use the built-in GPS.
Here are some things I've done and tried... any help or redirects to where I can find some answers would be very appreciated...
* Changed Google Maps to use COM4, 4800...
* Changed 'External GPS' to be COM4 (GPS program port), none & 4800 for Hardware, and in Access 'Manage GPS...' is selected
* Under my Phone settings I dont have the "Location Setting" to turn on/off (do I perhaps not have the right radio or other ROMs?)
Some phone stats:
* ROM version: 1.14.405.3 (22273) WWE
* ROM date: 10/24/08
* Radio version: 1.09.25.14
* Protocol version: 52.49a.25.26U
Thanks for any suggestions...
Cheers,
Dustin H
Click to expand...
Click to collapse
I'm using T-Mo in the US. The first GPS fix took a while...maybe 2-5 minutes. After that, usually finds fixes under a minute.
Looks like I have the same settings as you do.
Maybe search for and install VisualGPSce and see if you can get any satellite's on there?
kzw2zx said:
Here are some things I've done and tried... any help or redirects to where I can find some answers would be very appreciated...
* Changed Google Maps to use COM4, 4800...
* Changed 'External GPS' to be COM4 (GPS program port), none & 4800 for Hardware, and in Access 'Manage GPS...' is selected
* Under my Phone settings I dont have the "Location Setting" to turn on/off (do I perhaps not have the right radio or other ROMs?)
Click to expand...
Click to collapse
Dustin,
Your device information seems to be the same as mine, same rom, same build, etc etc. I left my google maps on default setting (managed by windows), my windows's "External GPS" is same as yours COM4->none->4800->auto manage
now, this may be a stupid question, in google maps, gps is turned off when you first start the application, you need to to into Menus->Use GPS. did you do that? the auto "My Location" is on by default, but that is only using your celluar..
I guess just let us know what happens when you said "it doesn't work", error messages? anything?
So embarrased...
...so after all the changes I had tried, come to find out the whole issue was that somehow my port was changed to '(none)'... once I put it back to COM4 it worked. Not sure why I changed the port that software needed to talk to the GPS, but whatever... doh.
Finally, all is working... the tool GPS Test (by Chartcross.co.uk) was very comforting to see the status as it started working.
kzw2zx said:
...so after all the changes I had tried, come to find out the whole issue was that somehow my port was changed to '(none)'... once I put it back to COM4 it worked. Not sure why I changed the port that software needed to talk to the GPS, but whatever... doh.
Finally, all is working... the tool GPS Test (by Chartcross.co.uk) was very comforting to see the status as it started working.
Click to expand...
Click to collapse
LOL, i knew it had to be something small, no worries, it happens to the best of us
so setting it to com 4 and 4800 it uses the GPS.. no need for a data plan?
tyronne1126 said:
so setting it to com 4 and 4800 it uses the GPS.. no need for a data plan?
Click to expand...
Click to collapse
Yes. GPS doesn't need a data plan.
okay. ill give it a try.. i have Garmin installed on my phone.. but there is a noticeable lag. (yes a real one) tested side by side with a garmin nuvi.. want to see how google maps works on it.. even tho im going to stick to the garmin. i dont use it much and i like how it looks.. a lag wont be a big problem for me
doesn't seem to work for me... it says error 183.. maybe im not getting good satt connection since im in my room? .. the garmin gets good connection.. ill try it later..
Internal GPS works just fine.
A little help
Thinking about getting a Touch HD. I'm out here in the states. How does the GPS work with no data plan from my current carrier and no maps? I see you guys talking about google maps, but I thought you needed a data plan for google maps. In other forums I hear people talking about various map software. What really works. The fine details please from someone who has successfully used the GPS with maps/mapsoftware without a data plan. Thanks!
suberizedgt said:
Thinking about getting a Touch HD. I'm out here in the states. How does the GPS work with no data plan from my current carrier and no maps? I see you guys talking about google maps, but I thought you needed a data plan for google maps. In other forums I hear people talking about various map software. What really works. The fine details please from someone who has successfully used the GPS with maps/mapsoftware without a data plan. Thanks!
Click to expand...
Click to collapse
I use iGO8 that doesn't require a data connection. TeleNav, Google maps, live search, etc. require a data connection to work.
Garmin, TomTom, iGO don't require a data connection because they are not downloading maps to the device.
I would suggest that you purchase GPS software since you won't be able to get 3G in the United States. I still use Google Maps when I need to find something close to me that iGO won't be able to find.
I tried Google Maps but it needs data plan to load the maps(It uses GPS only to show your position!). I'm looking for a software with preloaded maps.
does he know if his hd is fully unlocked
wingtytn said:
does he know if his hd is fully unlocked
Click to expand...
Click to collapse
Who's HD are you speaking of?
So will IGO8 show me maps of the USA...specifically California?
The Touch HD I plan on purchasing will be unlocked.
How do I setup my options to receive an email when someone replies to this thread? I'm forum noob. Thanks! Aaaah, "subscribe" to the thread. Got it.
My gps not working!
I have touch HD on AT&T in USA (Florida) and I cannot get my GPS to work in Google Maps or in MSN Live Search. I have set it to be on COM4/4800 and also automatic (Windows managed) and it does not work after 10-15 min. nothing. it says "initializing gps" but never receives data.
I have an unlimited data plan so i dont care about downloading data. I even installed att telenav and it says it cannot find my gps.
hi,
having a problem.. my set behaves as if no GPS is there..
leaft gps dashboard states 0 sats.
googlemaps search and search but 0
it is minutes...
is there something i am missing out? thank you
I take it you have already used program QuickGPS (should already be on your device) and downloaded latest satellite data?
thanks for replying.. yes i did !
com port is 4 under gps settings hardware : com port 0 baud 4800
windows auto manage
Are you indoors or outdoors?
both.. i saw other folks havign this prob.. but i cannot find a real solution.... arrgghhh
Ok, just trying to replicate your problem
Obviously you'll only ever going to pick up satellites if you are outside or close to a window.
Here is a few possible sloutions
Have you tried start ---> settings ----> external gps --->access---> check manage gps automatically?
and in google maps, options-->gps settings---> toggle auto/windows?
Another option is to try a tool by HTC to try and wakeup your gps. Run the file on your HD and from function menu select chip and then q7200. Choose port 4 and baud rate 4800. Then open the port and wait for a gps fix. After that close the port and exit the gps tool. Then run your gps navigator and see if it works!
Also try using HDTweak and go to settings within HD Tweak and set default value for AGPS to Disabled
Also, Advanced Config try turning off Quick GPS Fix
Fallen Spartan said:
Ok, just trying to replicate your problem
Obviously you'll only ever going to pick up satellites if you are outside or close to a window.
Here is a few possible sloutions
Have you tried start ---> settings ----> external gps --->access---> check manage gps automatically?
and in google maps, options-->gps settings---> toggle auto/windows?
Another option is to try a tool by HTC to try and wakeup your gps. Run the file on your HD and from function menu select chip and then q7200. Choose port 4 and baud rate 4800. Then open the port and wait for a gps fix. After that close the port and exit the gps tool. Then run your gps navigator and see if it works!
Also try using HDTweak and go to settings within HD Tweak and set default value for AGPS to Disabled
Also, Advanced Config try turning off Quick GPS Fix
Click to expand...
Click to collapse
sorry do u mean A-GPS? will try.. thanks
leobox1 said:
thanks for replying.. yes i did !
com port is 4 under gps settings hardware : com port 0 baud 4800
windows auto manage
Click to expand...
Click to collapse
1.gps settings : com 4, baud rate 57600 (if you have iGO8 let the program to look for the GPS)
2.disable AGPS (important)
3.in settings/GPS settings>program:com4
>hardware:none
>access:manage gps automatically
let me know if it works.
KukurikU said:
1.gps settings : com 4, baud rate 57600 (if you have iGO8 let the program to look for the GPS)
2.disable AGPS (important)
3.in settings/GPS settings>program:com4
>hardware:none
>access:manage gps automatically
let me know if it works.
Click to expand...
Click to collapse
i get mode 2 not fixed.. 0 sats.. just lots of mambo jambo scrolling thru... must i do anything at the cold and hot stuffs?
BTW one wierd thing.. i tried to extract this on pc and ppc.. the file gets extracted.. but i dont see it in file explorer.. but when i try to extract again.. it prompts overwrite...IE the file is there somewhere...
only way to run is in the zip.. but i want to delete the real file in the filesystem too.. weird.. anyone knows?
leobox1 said:
i get mode 2 not fixed.. 0 sats.. just lots of mambo jambo scrolling thru... must i do anything at the cold and hot stuffs?
BTW one wierd thing.. i tried to extract this on pc and ppc.. the file gets extracted.. but i dont see it in file explorer.. but when i try to extract again.. it prompts overwrite...IE the file is there somewhere...
only way to run is in the zip.. but i want to delete the real file in the filesystem too.. weird.. anyone knows?
Click to expand...
Click to collapse
When I tried GPS funtion the first time, I didn't see any sats for half an hour. Suddenly though, it showed 6-7 sats and since then it have worked. So, don't panik just yet.
(I had to stand still on a bridge with low buildings)
seems like HD's gps chip is kapo..
i miss my n82.. it get fixes in buildings by the window FAST..
pls guide me ,
how do i use the htcgps tool best? there are lots of settings.. mode, set, raw or mssomething, etc etc
open port? test?
what do i do? can i diagnose if my gps is working? does the streaming matrix like codes tell anythings?
it is always mode 2 fix no zero sats in radar
btw y everyone advise off a-gps? isnt it suppose to help greatly
leobox1 said:
i get mode 2 not fixed.. 0 sats.. just lots of mambo jambo scrolling thru... must i do anything at the cold and hot stuffs?
BTW one wierd thing.. i tried to extract this on pc and ppc.. the file gets extracted.. but i dont see it in file explorer.. but when i try to extract again.. it prompts overwrite...IE the file is there somewhere...
only way to run is in the zip.. but i want to delete the real file in the filesystem too.. weird.. anyone knows?
Click to expand...
Click to collapse
Just one question... have you upgraded lately to the newest radio ??
nope stock
reidar.ostrem said:
Just one question... have you upgraded lately to the newest radio ??
Click to expand...
Click to collapse
just upgraded to latest.. no help...
running for 5 mins no lock
but now there are 16 sats.. but they are all stacked over N.
how do i use the htcgps tools proper? i heard about clearing gps data etc but i dont see these options here
leobox1 said:
thanks for replying.. yes i did !
com port is 4 under gps settings hardware : com port 0 baud 4800
windows auto manage
Click to expand...
Click to collapse
baud should be 115200 ; everything lower let your soft loose connection with the chip evry so-and-such seconds.
KukurikU said:
1.gps settings : com 4, baud rate 57600 (if you have iGO8 let the program to look for the GPS)
2.disable AGPS (important)
3.in settings/GPS settings>program:com4
>hardware:none
>access:manage gps automatically
let me know if it works.
Click to expand...
Click to collapse
You guys seem not to get that a hardwarechip NEEDS a hardware COM. In TT you should use HW= com8 SW = com6 baud = 115200 manage = AUTO ; tell TT to use other NMEA 0183 com6 baud 115200 ....
leobox1 said:
btw y everyone advise off a-gps? isnt it suppose to help greatly
Click to expand...
Click to collapse
A-GPS is a software gimmick to load sat-data over internet. TT uses the GPS chip to read this data directly from the sats.
Dirk