has anyone experience any problem when using S2U2 on X1? I can press panel key or Ok key then it will take me to the panel/today screen without slide to unlock.
S2U2 screen sometimes display abnormal
Please?
randy_c said:
has anyone experience any problem when using S2U2 on X1? I can press panel key or Ok key then it will take me to the panel/today screen without slide to unlock.
Click to expand...
Click to collapse
Same here. The Panelbutton as well as the Camera button still work in S2U2 lock mode. It doesn't concern me much, because it's essential that noone gets a phone call or music starts to play while the phone is in my pocket. If the panel-button is accidentally pressed nothing bad happens.
S2U2 screen sometimes display abnormal
Please?
Click to expand...
Click to collapse
This sometimes occured when I set the "Display Mode" to DirectDraw. Now I use RawBuffer and haven't had this problem for 3 weeks now.
Let me ask you a question:
When in landscape-mode and the phone is locked with S2U2 the button to slide reacts very slow. In portrait-mode the button follows the finger very quickly. Is it the same with your phone?
Let me ask you a question:
When in landscape-mode and the phone is locked with S2U2 the button to slide reacts very slow. In portrait-mode the button follows the finger very quickly. Is it the same with your phone?[/QUOTE]
I have the same problem. Maybe it's the X1
Thanks, so then I'm calmed First I thought it could be an issue of the picture I use but after a few different ones it was still the same. So it's not just my phone
that's interesting, with the exception of the landscape problem I wasn't aware of the x-panel and camera button issues. This is more likely going to be a fix / update needed for S2U2...
I have got the same problem.
S2U2 doesn't work correctly in landscape mode on my Xperia. The sliding thing and the whole program become very slow.
This problem doesn't seem to be solved yet.
I am wondering if its a Xperia only problem, otherwise in should have been fixed till now.
F-Styla said:
I have got the same problem.
S2U2 doesn't work correctly in landscape mode on my Xperia. The sliding thing and the whole program become very slow.
This problem doesn't seem to be solved yet.
I am wondering if its a Xperia only problem, otherwise in should have been fixed till now.
Click to expand...
Click to collapse
The Xperia always seems to be very slow in landscape mode no matter if I'm using the SE panel, the messaging application or touchflo3D. Very strange behaviour considering the display resolution stays the same.
It is partly a xperia specific problem. The panel button is controlled at a very low level in the phone. The panel button action is located in the registry, but that action is called from a low level. The button isn`t recorded by most programs.
A_C knows of this issue.
btw, you can disable landscape for s2u2. So it`s in portrait allways.
dekeijzer said:
btw, you can disable landscape for s2u2. So it`s in portrait allways.
Click to expand...
Click to collapse
Yeah, that's right. But then sometimes the screen messes up completely when I slide out the keyboard and the phone wants to change the screen mode. Also, I have problems with the dialer and S2U2. Sometimes the dialer screen stays on top but S2U2 locks the screen. There is no way to unlock the screen anymore because S2U2 is not on top but the dialer screen cannot be closed.
If this problem is Xperia specific, I will disable S2U2 in landscape mode. I always hoped they will bring a update which solves this problem.
The Xperia always seems to be very slow in landscape mode no matter if I'm using the SE panel, the messaging application or touchflo3D. Very strange behaviour considering the display resolution stays the same.
Click to expand...
Click to collapse
Yes i realized the same. I thought this would be a problem of Windows Mobile and not of the Xperia. If it is a Xperia problem, this is a big minus point for the phone.
It's a nice unlock system, but I have found that when I use this programme the battery loses power quickly.
was using ver 1.44 very stable for a long time
until i installed panel manager from r3a... same issues with panel button unlocking and ok button unlocking
upgraded to 1.62 and problems got worse...
downgraded to 1.52 and switched back to panel manager r2a for the time being.. which is ok.. b/c i rarely used the growing panel and the new cnn panel sucked anyway..
would love to have all the features of s2u2 1.62 but alas xperia doesn't quite seem to work that well with it
currently i have s2u2 set to ignore screen rotation and not unlock with keyboard slide out
my only real grief at this point is that it won't let me use slied to answer or just the regular answer keys with caller id turned on ... i have to turn it off and use the SE answer key completely unlocks my phone to display that message too so agravating...
A_c makes a kick ass program none-the-less ... !!!
same problem here. Also with last version no lock for panel button and camera button...
Camera and Panel button are known issues ...but not a problem for me either -as I do not see S2U2 as a "security focused lock" ...instead I see it as a "prevent accidental calls etc" type of lock
I still use the system lock with password if I need to "security lock it" (using a today shortcut that immediately invokes it, with password)
Must say I suffered some probs with v1.4 and v1.5 (caller ID & power drain)
But am using 1.62 without problems -it doesn't freeze on caller ID (I have it on window rather than full screen) and the battery drain has gone completely (uses <10% overnight for example, with G-alarm and data / active sync both running all night)
I found that it really was critical to uninstall, delete the S2U2 folder in program files, and delete the whole S2U2 tree in the registry ...and then soft reset -before installing the new version
I'm a huge fan of S2U2 ...its just awesome -without a doubt THE must-have app IMHO and always the first thing I install after a hard reset
I use S2U2 and have just upgraded to 1.62. Seems to be working ok so far, although no-one's called me since I upgraded so not sure of freeze problem :-(
(note to self: Get out more, make some friends ;-)
I find landscape doesn't work well at all with S2U2, but then I also find that with PointUI Home2, so maybe it's an X1 thing with particular software...?
The battery drain issue does seem to be resolved in 1.62.
I too am having problems with screen freezing when a call is received - the slider doesn't answer and since I had the buttons disabled there was no way to answer the call.
I'm still experimenting with other settings but I don't get many calls so it is a long process.
Still, a superb program and essential for me because of the problems with a magnetic case which causes calls to be answered just by removing the phone from the case.
jcsxda said:
Camera and Panel button are known issues ...but not a problem for me either -as I do not see S2U2 as a "security focused lock" ...instead I see it as a "prevent accidental calls etc" type of lock
Click to expand...
Click to collapse
Which means it can't even do accidental call prevention properly, as I found today. It's still quite easy to press the Panel button then the Call button in succession, as they are next to each other, especially if the phone's in a case. Result - pocket dialling, defeating the whole object of program. Shame really, as I've found S2U2 ideal on other phones.
Yep landscape is very slow ..... when i put ignore screen rotation on sometimes when open the keyboard screen goes all fuzzy... bitof a problem. But its a great program...sure it just needs some tweaks n bugfixxes for the X1
sweeet on v2.02 im no longer getting these landscape issues
Related
I missed the last train yesterday, because I was not able to slide and unlock S2U2, since it was stuck in landscape and wouldn't change back to portrait. I was unable to 'slide' the slider all the way to the end to unlock no matter what I tried ! The only way to get rid of it was to soft reset.
Do I need to use gyrator to disable rotating (if so could anyone tell me how ?) , or is there some setting within S2U2 which I didn't spot ?
Thanks
I have exactly the same problem, would like to know if there is anything to do about it. I have disabled it for the moment
yeah Gyrator might have problem with S2U2 this way..
I was used to disable it, it somehow worked but it's not so perfect
here a solution i'm using, but it may look a little silly when u do
--> Try rotate the phone in different orientations. The S2U2 will eventually turn into a unlockable look... and a little tip for you: If the S2U2 looks reversed (like when you're holding the phone reverse-portrait but the S2U2 is displaying in portrait mode, vice versa) and you cannot slide the unlocking bar, try slide on the position where the bar should be if it displays correctly.
it looks silly, but it works
maddie said:
yeah Gyrator might have problem with S2U2 this way..
I was used to disable it, it somehow worked but it's not so perfect
here a solution i'm using, but it may look a little silly when u do
--> Try rotate the phone in different orientations. The S2U2 will eventually turn into a unlockable look... and a little tip for you: If the S2U2 looks reversed (like when you're holding the phone reverse-portrait but the S2U2 is displaying in portrait mode, vice versa) and you cannot slide the unlocking bar, try slide on the position where the bar should be if it displays correctly.
it looks silly, but it works
Click to expand...
Click to collapse
and oh, by the way, i found it doesn't happen so often now (maybe wallpaper enabled? or it is what it used to be... no idea..)
then this solution, i think it's worth a try
I personally just hold down 'Hang Up' for a few seconds which automatically locks the phone
Easy to use, no hassle
Fallen Spartan said:
I personally just hold down 'Hang Up' for a few seconds which automatically locks the phone
Easy to use, no hassle
Click to expand...
Click to collapse
well..
we all have our habits using phones
for us uses S2U2 as a screen lock, this is the temp. solution and the best thing would be a patch for it..
Read post 226 in following thread
http://forum.xda-developers.com/showthread.php?t=446440&page=23
May provide some answers for you
Hi
I have had the same issue with S2U2 rotating but never any problems with the phone part
S2U2 is disabled in Gyrator2 but it seems that when using another app in landscape and lock the phone it does not seem to be able to rotate back quickenough before locking with s2u2
All i have done is to select unlock when stylus is removed within the S2U2 settings and now if the screen is corrupt in S2U2 i just remove the stylus and it unlocks.
sbirsen said:
I missed the last train yesterday
Click to expand...
Click to collapse
silly question perhaps, but how does the state of your cell phone make you miss the train?
machmandp said:
All i have done is to select unlock when stylus is removed within the S2U2 settings and now if the screen is corrupt in S2U2 i just remove the stylus and it unlocks.
Click to expand...
Click to collapse
yep this seems the best option so far. i've had this prob and reset the phone many times before remebering that taking out the stylus unloks it ....
gwbard said:
silly question perhaps, but how does the state of your cell phone make you miss the train?
Click to expand...
Click to collapse
i was trying to check what time the last train was leaving, and I lost very valuable (!) 4-5 minutes trying to unlock the stupid screen and when that didn't work waiting for the phone to reboot. by the time i was back online it was too late.... also no frickin' cabs on oxford street when you need them !
I want to start this threat to put together information in order to sort out why the device lock delay (see below) appears and how to solve it.
wm6.5 device lock app has changed from "tap here and next there" to a slider style like app you know from s2u2.
problem:
device lock is enabled
Code:
HKCU\ControlPanel\BackLight\AutoDeviceLockEnable=1
wake up the device by short pressing the power button
device lock screen is displayed instantly
it takes ~2 seconds until the slider of the device lock screen is activated and can be slided.
if you use device lock it becomes really annyoing.
there are some threads about this like this one, but the solution is not working on a Touch HD.
can anybody sched some light onthe problem why and where it appears or maybe someone already found a solution.
please post any useful information.
please do not post tips like use s2u2 or any other locking app - I do not want to use them.
the only thing i can thing of is use s2u2 or any other locking app
egoist6 said:
please do not post tips like use s2u2 or any other locking app - I do not want to use them.
Click to expand...
Click to collapse
cookiemonster55 said:
the only thing i can thing of is use s2u2 or any other locking app
Click to expand...
Click to collapse
cookiemonster, either you didn't read his post or you're a sort of a jerk.
And yes, in response to the poster, I have the same problem.
Zoltair Wright said:
cookiemonster, either you didn't read his post or you're a sort of a jerk.
And yes, in response to the poster, I have the same problem.
Click to expand...
Click to collapse
latest build 23001 still has this annoying delay
Iv noticed this too... The biggest annoyance for me is you turn the device on and the backlight isnt very bright, makes it near impossible to see the screen in daylight. Is it possible to have the backlight come on full when you press the power button?
i have this problem too. i think it is a serious bug of wm6.5
just hoping it will be fixed when the official release come out.
god i thought i was the only one, something about my config...
and i was exited about the new 6.5 lock screen,
but then it works like all the other M$ 6.5 sh!t, it doesn't
had to switch away from it
May be this help you:
http://forum.xda-developers.com/showthread.php?t=527219
A1983 said:
May be this help you:
http://forum.xda-developers.com/showthread.php?t=527219
Click to expand...
Click to collapse
thanks for your help - but that was the solution i am talking about in my first post and unfortunately does not work.
also find this intensely annoying! if you look, on my hd, in the top left corner a small windows flag appears to indicate that the slider is locked, it disappears once the slider is active, and there is a definite exact time out, i dont think its random or a load time
hope this is sorted cos its rubbish!
regards
mat
What I've done that got rid of most of the delays regarding the lock screen on my Xperia:
I got 6 cpr files from my device's /Windows directory: LS_LockScene_xxxxxxx.cpr, LS_AlarmScene_xxxxxxx.cpr and LS_PhoneAlertScene_xxxxxxx.cpr. Get files that fit the resolution of your device, they are in pairs for portrait and landscape
opened each one of them in a text editor (they are XMLs inside)
removed all "ControlSequence" sections from them (those sections are small (like 4 entries) and big (up to 21 entries). These sections are animations of arrows. Arrows will still be there after that, they just won't animate.
uploaded cpr files back to /Windows, overwriting originals
soft-reseted.
Hope it works on your devices too
lemat1 said:
also find this intensely annoying! if you look, on my hd, in the top left corner a small windows flag appears to indicate that the slider is locked, it disappears once the slider is active, and there is a definite exact time out, i dont think its random or a load time
hope this is sorted cos its rubbish!
regards
mat
Click to expand...
Click to collapse
yeah. and with 6.5 23003 onwards in the top right corner an "X" (for close) appears. only when it goes off you can access the slider.
it seems as if an app is started.
pikipirs said:
What I've done that got rid of most of the delays regarding the lock screen on my Xperia:
I got 6 cpr files from my device's /Windows directory: LS_LockScene_xxxxxxx.cpr, LS_AlarmScene_xxxxxxx.cpr and LS_PhoneAlertScene_xxxxxxx.cpr. Get files that fit the resolution of your device, they are in pairs for portrait and landscape
opened each one of them in a text editor (they are XMLs inside)
removed all "ControlSequence" sections from them (those sections are small (like 4 entries) and big (up to 21 entries). These sections are animations of arrows. Arrows will still be there after that, they just won't animate.
uploaded cpr files back to /Windows, overwriting originals
soft-reseted.
Hope it works on your devices too
Click to expand...
Click to collapse
great. that helped a lot!
now the lock screen is flickering shortly and the whole lock screen slides in once more from the bottom to the top but then the slider is instantly accessible.
from a time perspective a great improvement!
update:
basically you can delete the whole layer
Code:
<Layer ID="SlidePath" >
...
</Layer>
which removes the animation of the arrows and the arrows themselves.
do not delete this section if you do not know in which direction to slide the button
however, the delay is still ~1 second. but i think i can live with that allthough it is annoying to wait one stupid second to proceed
the delay you get when recieving a call with lockscreen on is caused by the slide to answer feature of alot of the new dialers. it conflicts with the popup call answer screen with wm 6.5. to fix this can find a dialer that doesnt have slide to answer feature. the backlight problem came from backlight.dll in the kaiser, using a new one from stock rom now and it works perfect
If you enable the enter a pin number after slide, there is no delay at all. I know this isnt a solution i hate entering a pin. however, i have a felling the pin app is running in the background and thus you dont get the flicker where it flicks from Start menu back to the lock app. Hence if you could create a dummy pin app, it could work to stop the delay.
twopumpchump said:
the delay you get when recieving a call with lockscreen on is caused by the slide to answer feature of alot of the new dialers. it conflicts with the popup call answer screen with wm 6.5. to fix this can find a dialer that doesnt have slide to answer feature. the backlight problem came from backlight.dll in the kaiser, using a new one from stock rom now and it works perfect
Click to expand...
Click to collapse
thanks for your reply. but i also have the delay when simply waking up the device by pressing the power button (without receiving a call)
xternal said:
If you enable the enter a pin number after slide, there is no delay at all. I know this isnt a solution i hate entering a pin. however, i have a felling the pin app is running in the background and thus you dont get the flicker where it flicks from Start menu back to the lock app. Hence if you could create a dummy pin app, it could work to stop the delay.
Click to expand...
Click to collapse
that's true. i replaced LS_SimplePinScene_480x800.cpr with an empty one and allthough not using pinlock, the lock app did not work at all.
What if we designed something where when you slide it calls a mortscript or something and enters 0000+OK to by pass the pin screen (assuming you set pin to 0000). Then you edit the Pin screen so it is just a clear page, so you dont even see the pin screen flash up.
Not sure if this is at all possible as im not a programmer. Just a thought
xternal said:
What if we designed something where when you slide it calls a mortscript or something and enters 0000+OK to by pass the pin screen (assuming you set pin to 0000). Then you edit the Pin screen so it is just a clear page, so you dont even see the pin screen flash up.
Click to expand...
Click to collapse
good idea. maybe someone can change LS_SimplePinScene_480x800.cpr so that it does not expect the pin from screen but is embedded directly into the cpr file?
can anybody who has a better understanding of cpr files or the lock app give us some tips?
xternal said:
Not sure if this is at all possible as im not a programmer. Just a thought
Click to expand...
Click to collapse
me neither
is there anyone who has managed to get that touch lock screen where u connect the points in a pattern of your choice on the leo (i think its from the droid but i might be wrong)? i'd like a tiny bit more security then the normal lock screen but something a little better than the normal pin entering kefuffle
You are probably referring to ThrottleLock, which fakes Android unlock sequence.
I tested it on my Leo, it was ugly with the default skin, awfully slow and the G-sensor was not recognized. In fact, it was better on my Kaiser...
I wish we had more alternatives than the iphoneish slide unlock. No offence to A_C but I'm tired of having every iphone owner say "oh they even copied the unlock screen". I'm tempted to write my own using the multi-touch capabilities (like "press A + B at the same time to unlock"), but I need to improve my C# first...
I'm using throttlelock, which has the pattern. It's working fine on my Leo and is quick. Much quicker than my Kaiser was. I don't mind the look of the classic throttlelock which is transparent. I'm more than happy with it.
cheers, i downloaded and installed throttlelock but i cant get it to lock with throttlelock when i press the lock button... any way of chaging the settings for it to use throttlelock instead of the current screen?
Edit: I changed my configurations and now ThrottleLock locks automatically on power-on. I've even changed the original skin to VGA so its much less ugly now.
Hi! Same issues with ThrottleLock in my phone:
It recognizes the GSensor, but its very slow to update the screen with the 3D effect.
It doesn't lock the screen automatically on poweroff-poweron. In fact, sometimes it locked the screen automatically, I don't know exactly under which circunstances that happened.
I don't know how to make it show notifications. But perhaps, that's because I didn't understand its configuration.
I thought about posting a message in ThrottleApps forum, but the forum looks kind of abandoned. :-(
That's a pity because, although it wouldn't win beauty contests, I really liked its password scheme.
I solved my problems with the automatically lock.
I've changed the background skin for a WVGA one and it looks better now. (But the G-Sensor is still very slow, so I'll disable the 3D animation.)
I'll try ThrottleLock for some time.
wvga skin for throttlelock
Hey just wonder where you found a wvga skin for throttlelock
searched through google, xda and throttlelock's website and all i could find were dead links.
its also a pity that throttlelock hasn't been updated in over a year as the idea is a good one.
movieman14 said:
Hey just wonder where you found a wvga skin for throttlelock
searched through google, xda and throttlelock's website and all i could find were dead links.
its also a pity that throttlelock hasn't been updated in over a year as the idea is a good one.
Click to expand...
Click to collapse
In fact, I customized the original skin to WVGA. Mostly, I changed the background picture, did some smal changes to the file skin.xml and doubled the icon's size.
I attached the skin. Put the directory Akira.WVGA under your skins directory (in my case, its \Program Files\ThrottleLock\Skins) and change the skin in ThrottleLock Settings. You can change the file back.png to one that suits your tastes.
Note: I'm on the verge of switching back to Slide2Unlock2. Sometimes ThrottleLock takes several seconds to unlock. I'll test if this problem occurs with S2U2 too.
thanks
thanks for the skin
will use soon as hd2 gets back from repair
With throttelock The screen locks during a call.
When a call is in progress and the phone is close to the ear, the screen shuts down to prevent accidental taps without locking the screen and when the phone moves from the ear, the screen wakes up and it's possible to use it forward.
But with throttelock, the the screen shuts down and locks itself and when the phone moves from the ear during a call, I must first unlock it.
How can I make the screen only to be shut down when a call is in progress and the phone is close to the ear and not to lock the screen?
Hi there! I have a problem with S2U2 on my I8000 Omnia 2. I installed it, and tried it. It's a cool program, but the call screen is not working to me.
----------
I also have new problems with S2U2. smile.gif I don't care about the sliders anymore, I was turned all off. But when my phone rings, and I press the answer button, the phones keep ringing and not do anything. I can't accept calls with S2U2. Is this a known issue or someone have an idea how to fix this? Or I should use an other app like S2U2?
----------------------
This messages copying modoco.
Try the latest S2U2 Release v2.30, works like a charm on my Omnia2.
Make sure to select RawBuffer as Graphics Mode. (Setting is located at Advanced S2U2 Settings page)
S2U2 was a real pain in the ^ss up until v2.30.
I haven't had any locking issues with the new version, but some serious battery drain have been spotted. I don't mind, since I have chargers at the car, the office and any other place I need it.
It takes like 13% percent of battery overnight when the phone sleeps.
Without S2U2 I can navigate with GPS for an hour for around 10%.
i am facing one serious problem when using S2U2.
original Samsung Omnia2 alarm does not work properly under S2U2.
sometime alarm ring properly. but sometime, only a very short "beep" then it stopped.
this happened especially during alarm in Snooze.
anyone know how to tackle this problem?
thank you in advance
Fire1986 said:
Try the latest S2U2 Release v2.30, works like a charm on my Omnia2.
Make sure to select RawBuffer as Graphics Mode. (Setting is located at Advanced S2U2 Settings page)
Click to expand...
Click to collapse
I am using WM6.1 and problem with s2u2 (LATEST) is that while it locks the screen nicely, it leaves the ans/end hard key exposed. This creates problem when I accidentally press them while taking phone out of the pouch. For that I had to have other arrengements as mentioned in this forum. If you had no such issues, then your OS must be of a different version. I hate machine specific softwares.
Not true
Out of all HTC snobs here at XDA, A_C is the one who really cares. V2.22 was blazinly fast updated to V2.24 because of dimming issue on ... thats correct - Samsung Omnia II devices. So talking about device-specific software about S2U2 is so wrong and unfair.
I am facing a different problem with S2U2..
When I am listening to music through Touch Player, the song gets paused as soon as S2U2 activates, then I have to press the lock key and then the song plays again
When S2U2 is not running it plays the song flawless..
Any settings I need to change..?
Khisha said:
Out of all HTC snobs here at XDA, A_C is the one who really cares. V2.22 was blazinly fast updated to V2.24 because of dimming issue on ... thats correct - Samsung Omnia II devices. So talking about device-specific software about S2U2 is so wrong and unfair.
Click to expand...
Click to collapse
But at the end of the day, it is not locking the ans/end lock keys which is a problem
Ps: I hv never owned an HTC
No need to use S2U2 now, I am using TouchLockPro, much much better, no more secondary gesture when power on, also the app is fully utilizing the G-sensor and the light sensor.
mokkimhong said:
i am facing one serious problem when using S2U2.
original Samsung Omnia2 alarm does not work properly under S2U2.
sometime alarm ring properly. but sometime, only a very short "beep" then it stopped.
this happened especially during alarm in Snooze.
anyone know how to tackle this problem?
thank you in advance
Click to expand...
Click to collapse
I had the same problem that was very annoying and some of the above too...The main reason I wanted s2u2 was because I didn't want the hardware key button answer call to be enable.Sometimes I was answering calls without knowing it because it was in my bag and with all the stuff in it the button was pushed by itself...From what i see samsung herself has slides for accept or end calls, why the hardware key buttons have to work too?Do you know any trick to disable them when the phone is locked...
Thanks i n advance!
I have the same problem with my Omnia.
Using latest S2U2 (2.43) and setting an alarm with the standard Samsung app.
I have tried most probably all combinations of s2u2 and alarm settings, without any luck.
Anyone ever found a solution for this ?
Usually when a call comes and the phone is inside the pouch (good for protection), there are several ways of messing up by accepting or rejecting the call even b4 its completely out of the pouch as blelow:
On screen:
1) U can press the on screen message but which will send an auto sms to the caller and end the call
2) U can press the answer key
3) U can press the ignore key
Off screen (hardware)
4) U press the answer key
5) U can press the end key
Incredibly, all 5 options are simultaneously active. The screen can be locked by S2U2 etc. but I cannot find any option of locking the hardware keys.
Any help will be appreciated
Firstly thanks for Omnia i8000 support on XDA..
Now I feel secure..
Secondly even I'll lyk to disable my hardware keys for call ans/end..
is there a registry tweak or something we can do to disable it..
s2u2 has that option... go settings/phone and u have S2A Hard ans/end key...
Search 542482 - there's an app for that over in the Mobile Apps & Games forum
Solution found!!!!
The issue was really troubling me and I finally found a solution. Install a small program called Incall lock which locks the call & end key. But that will totally disable u from accepting calls under WM6.1. So install s2u2 and enable screen response and voila!! U have. Both these are available elsewhere in this lovely forum.
Note:- The whole process during inplementation is quite messy as u will first have to install .net compact & samsung SDK software (both freely available).
4 software to do a simple thing which should have been taken care of by the OS. That's life under our billy, the goat.
Hope this help. I would be glad to give something back to this site, i have greatly benefited from.
TouchLockPro works great.
(I can't post a link yet...search for it in the Omnia 2 section at Modaco).
ad720 said:
TouchLockPro works great.
(I can't post a link yet...search for it in the Omnia 2 section at Modaco).
Click to expand...
Click to collapse
I tried tpro but it did not work for me. I am using wm6.1 under samsung touchwiz. Cud it b because of that ?
TouchLockPro is the answer, however, if both touch screen and the keys are locked on all in-coming calls, how the hell do you answer the phone? First to unlock it then answer it? A bit troublesome.
captkkk said:
TouchLockPro is the answer, however, if both touch screen and the keys are locked on all in-coming calls, how the hell do you answer the phone? First to unlock it then answer it? A bit troublesome.
Click to expand...
Click to collapse
See, even if no software was there u wud have to press a key or tap something to answer anyway. With S2U2 and incall lock, the only point of access is the slider (in my case) with which i can either accept or reject calls. So if i swipe to ans, the lock opens and i can straight away start talking. So there really is no extra step involved. Whereas, if I do not lock the key, I will have to be careful not to press the keys accidentally which is difficult as I often put it in my pocket and more so inside the pouch. I think the swipe to answer is the killer option.
bimboybimboy said:
See, even if no software was there u wud have to press a key or tap something to answer anyway. With S2U2 and incall lock, the only point of access is the slider (in my case) with which i can either accept or reject calls. So if i swipe to ans, the lock opens and i can straight away start talking. So there really is no extra step involved. Whereas, if I do not lock the key, I will have to be careful not to press the keys accidentally which is difficult as I often put it in my pocket and more so inside the pouch. I think the swipe to answer is the killer option.
Click to expand...
Click to collapse
Slide to Answer is great option to traditional Click to Answer, that is very true, however, that option has been adopted in 6.5 and some 3rd parties phone app as well, so if in i8000 case, the phone interface can be omitted and use the 6.5 or simply use those better and more feature phone apps
captkkk said:
Slide to Answer is great option to traditional Click to Answer, that is very true, however, that option has been adopted in 6.5 and some 3rd parties phone app as well, so if in i8000 case, the phone interface can be omitted and use the 6.5 or simply use those better and more feature phone apps
Click to expand...
Click to collapse
Well, as I said I hv 6.1 & 6.5 not yet available in my country. so...
Hi,
I installed Throttle Lock.. Nice lock... it has slide to answer..
secondly it does not interfere with the touch player, lyk s2u2 does..
Are you using Omnia II with WM6.1 ?
Because throttle lock is not saving the settings on my phone. And yes, I am clicking the "ok" button at the top right and getting a message "changes saved". And my slide to answer is ON but no slide is displayed. All I can see is the default lock screen which opens when I click on a button on screen but that certainly does not solve my problem. Using ver .07 (latest).
I have even registered myself. Hell, the config.xml file shows Calllock is on but its not even locking when the call comes. That should be the very basic default function. Sorry, back to s2u2.
I am using WinMo 6.1 original Rom...
I installed it on Storage memory.. and its workign fine.. It does interfere with the Samsund dialer when the call comes in... but I will try disabling the samsung dialer and check... back to your issue.. Try re-installing it.. and it should work.. iam able to save all my settings..
And when the call comes in My hardware keys are lock as well and I get option to Slide to Answer or reject..
Aafi-rocks said:
I am using WinMo 6.1 original Rom...
I installed it on Storage memory.. and its workign fine.. It does interfere with the Samsund dialer when the call comes in... but I will try disabling the samsung dialer and check... back to your issue.. Try re-installing it.. and it should work.. iam able to save all my settings..
And when the call comes in My hardware keys are lock as well and I get option to Slide to Answer or reject..
Click to expand...
Click to collapse
Thanks. I unistalled S2u2 and installed again. Still no. Yet the program was working when I clicked on it. So, luckily having some working knowledge of windows, I found that the program is not putting a link in the start menu or start up folder. This I had to do manually. But thats unclean.
And what happens when a call comes is funny. There is a brief fight between the throttle default , the windows splash & the lock screen itself. Luckily, the lock screen is winning every time. But again unclean or is it the links I have placed.
Currenly, I have links to both thottlelock & throttlelockdemon in the startup & lockdemon in the start menu. How is it with u?
Also in the setting under samsung default setup, the options like lock mode & incoming are white on white. What are your current settings ?
Think this program was designed for HTC. But is definitly smaller and though not neat...working. Thanks
I have mapped it to a hardware key, so when I want to lock I press the hardware key..
Aafi-rocks said:
I have mapped it to a hardware key, so when I want to lock I press the hardware key..
Click to expand...
Click to collapse
Use incall lock for locking the keys when call comes. Works perfectly.
Tried the throttlelock for 2 days. Sometimes, the default wm screen was coming up and the look is messy. So more experiements......but till date s2u2+incall lock looks the cleanest. Will keep looking...
captkkk said:
TouchLockPro is the answer, however, if both touch screen and the keys are locked on all in-coming calls, how the hell do you answer the phone? First to unlock it then answer it? A bit troublesome.
Click to expand...
Click to collapse
I'm using TouchLockPro. It's much faster and less memory consuming than S2U2 and it has multiple ways to unlock your phone!
In the newest version, you can unlock your phone by using the proximity sensor (and our Omnia II has one )
So if your phone wakes up in your pocket our pouch, it won't unlock, but if it wakes up in your hand or on your desk, it will unlock immediately!
Consequently, if you have an incoming call and the phone is in your pocket: It will remain locked until it's out of your pocket so you don't have to manually unlock before answering
I love it!
maardiweb said:
I'm using TouchLockPro. It's much faster and less memory consuming than S2U2 and it has multiple ways to unlock your phone!
In the newest version, you can unlock your phone by using the proximity sensor (and our Omnia II has one )
So if your phone wakes up in your pocket our pouch, it won't unlock, but if it wakes up in your hand or on your desk, it will unlock immediately!
Consequently, if you have an incoming call and the phone is in your pocket: It will remain locked until it's out of your pocket so you don't have to manually unlock before answering
I love it!
Click to expand...
Click to collapse
I hv omnia 2 with wm6.1. Tried touchlockpro and was absolutely useless. How is it possible ?
Can u plz put in the download link.. Iam sure its somewhere on XDA itself, but I am kinda lazy to search today.... I'll download it once I reach home..