Hello all,
I have recently killed my Jamin. Im not sure whether it is permanent or not. Personally it looks like a rom failure with the video bois, but I am far from experienced with windows mobile#.
I have searched the forum and can not find anything similar.
(Story)
To cut a long story short, I picked up my Jamin while it was connected to my pc. Catching a gimps of WM5 and the battery fell out (while still connected to my vista pc). So it turns off and I put the battery back in and turned it back on.
(What does work)
This is kind of hard to explain, but from what gather, everything seems to be running fine except the screen. Basically it still syncs up (can access files) and the Bluetooth led turns on after a minutes or how ever long it takes
(Problem)
The problem is that the screen is doing something weird (This is the hard part to explain). I do not get anything out of it even the "htc" pic at the start.
It has these blue horizontal lines about a pixel wide running down the screen. They change like the screen is trying to display different things but it is as if it does not know how to use the screen.
Im thinking re-install the rom? But I do not want to make things harder for myself if I am wrong.
Any help would be greatly appreciated.
Tryed Flashing.
Well If anyone is interested, I tried Re flashing and I still get the same problem. My next PDA will not be an Imate, too many problems.
Related
Hello All,
It has been a while since my last post, but I need help once again.
My Magician has taken a turn for the worse. The power connector has broken off and I had it repaired by a great company.
My issue is now the device is coming up with multiple colors on the display (primarily Orange, Light Blue, and White) vertically). This is different from the color test where it is Red, Blue, Green.
When I attempt to load the ROM all I get are connection issues on the MaUpgradeUt. I am not positive I have gotten the device into the correct mode as the display is not working. Speaking of displays, the company that attempted to repair my device did try a new screen and experienced the same results. Also they placed the original screen on a new Magician and the screen worked great.
Does anyone have any suggestions? I would love to have my Magician back.
Thank you,
John
John,
Try maupgradeut_noid.exe from the ftp, instead of maupgradeut.exe. It may help. I don't advice you to run down the battery cause some are complaining that it won't charge without OS. BTW does the led come up constantly when you plug in the power or usb? If so you probably still got an OS.
Guess you know how to put it into bootloader, just try & hold for a second or 10 & connect usb & try to flash with the no_id. Must be difficult without confirmations on your screen, but a SD flash will be even harder.
Hope this helps, otherwise I see only one solution left: have it serviced again :-(
Regards, M
Thank you for the info.
I tried the new MaUpgradeUt_noID but now I am getting the error on the PC saying Error 150: ROM Upgrade Utility Error.
The device appears to be fully functional with the exception of the screen.
John
Did you ran the noid once or twice. It needs to be running twice, my guess is that in the first run it alters the RUU file (adds the first line devicecheck or something) & the second it really upgrades.
Was the screen problem present before you had the power-connector serviced? Maybe something is loose or broken now...
Cheers, M
I have a g4 8125 and tried to flash black diamond 2.0 using shelltool. I followed all the instructions, but I may have messed something up. I installed the enablerapi and certspcs files on my phone, but i realized later that i did this after turning off my radio. After flashing I made a hard reset, and now it just comes to the cingular splash screen and shows my ipl, spl, gsm and os (which it says is 6.0.0.0) and doesn't load anything. Anyone have any ideas? It won't connect to activesync either.
edit: sorry for my ignorance, thanks for the help though!
Please refrain from posting WITHOUT using the search bar. This question has been answered more than a million times.
For starters, hold down the camera + power button whil poking at the reset button
Hello there.
This is my first post, and I hopefully pray that I don´t get a "Please Do a search" kind of answer as I have been doing a hard search through the forum but haven´t found what I´m looking for. Probably I´m just using the wrong search terms but english is not my native language so I´m not sure how to look up for this issue.
First, I unlocked the sim of my device by sending it to a third party. Afther that, the phone came with a Wizard-Love OS installed, and finally I got excited and started to mess around with the Shelltool to get the device upgraded to WM6. (It´s a G4 by the way).
First I successfully upgraded to wm6 wee htc wizard v5.2.660, but then I found that the keyboard mapping was all wrong with the shown special characters (they weren´t where they were supposed to be at all), so i tried messing up with the registry trying to select a local language for spanish with no success at all....
Also I was having some issues trying to connect to internet via wi-fi even when I did get connected to the network, but did not test it hard enough.
Then I went farther trying to "shelltool" a Black Diamond 2.0 Touch rom, but then everything became a real mess... The Shelltool said that it was finish only like 4 to 5 minutes after starting so I disconected and Hard Reseted the unit. Don´t remember if I disabled the radio before flashing it, nor if I had the sd card installed on the device at the flashing momment, but definetly i had reinstalled the cert_spcs and EnableRapi cabs prior to this seccond attempt.
After the hard reset, it started but freezed on the first screen showing the ipl, spl, gsm and os (which it says is 6.0.0.0). Then I hard reset like two more times, with no luck. Then I entered on the bootloader mode, but after trying that for a while the phone stopped responding. It did not turn off, so I removed the battery. Then when I put the battery back the unit did not turn on at all. Even it did not show the charging red light when I connected it to the usb nor the wall ac adapter. I was devastated... I leaved the unit with the battery out all the night and the next day I reinstalled the battery to see that the device did turn on and did charge, but still it was locked on the splash window.
I tryed to reflash the unit using the bootloader under windows xp, after killing the activesync connection and using the wizard_Love_2.26.10.2_WEE_Novii_CF2 rom. The unit showed a progress bar so the pc and after 10-12 minutes it was done. I Hard reseted the unit but then it always started on the bootloader screen as if I was pressing the camera button.
Hard reseted, soft reseted, battery out and in, no luck. Then it went dead again. It did not turn on at all and no charging light. Once again i leaved the unit all day without battery and send it to the friend that had unlocked the sim for me. He just called me and told me that the unit was now up and running again with wizard_love rom. I´m really not sure how he did it. Probably i did something with the sd inserted when it was supposed to be out. I did flashed the wizard love on bootloader with the sd inserted but i´m not sure if that could have make the mess.
I would like to know if anyone have had this kind of lock up and how to deal with it (how much time to leave the battery out, etc). Also I will love to know how did my friend (he wont tell me as is it´s bussines and he charges for it) finally restarted my unit flashing wizard_love again, as I´m still too curious to not try to flash my unit again and probably be on the same mess once again.
Thanks in advance.
That's a lovely 1st post. If every one is to be like that.. it would be just to nice to help others.
Anyway, this may not sound logical, but I get problems with Shelltools when I do not have the official ROM flashed before another flash. What I would suggest is that, you ought to have an official ROM (check Wiki to download your official ROM flashing EXE), which seems to get me out of trouble a few times.
Also, it maybe wise to check your battery before any flashing attempt, make sure it is 100% (60% will do mostly, but in case of an emergency, that 40% helps). It cases where a phone doesn't go charge/bootloader, it is battery problem. The overnight thingy that you've done, probably rest the battery long enough to boost it to a charge (e.g. how you get a blink when you switch off a torchlight for period of time on a low batt).
Good also among your information, tell us the IPL/SPL/Radio on the ROM you are using.
After upgrading to WM6, every works perfectly. But then, it seemed randomly, the display is blank/ all white, but I can the phone is still functioning, because i can tap on the screen and get the tap sound. Soft reset and hard reset doesn't work. I'm doing the hard reset blindingly since the display is showing nothing, guessing the key push (i pressed record-camera 3x then mail button). I'm pretty sure it did the reset because after about 30 secs I get the beep that comes on when the screen is showing Tap to setup your device.
I figured it might be a loose lcd cable, but if go into the bootloader, power+record+reset. The display works fine! Showing Serial V 2.07.
I took apart the BA anyways and made sure the lcd cable is firmly attached. It didn't work.
Sometimes the phone would go back to normal randomly, or if I let the backup battery drain, but not always. When it goes back to normal, the clock is always reset to 2004 12:00 AM.
Can anyone help me? Is it possible to have a loose LCD connector which won't be able to show normal display, but can show the bootloader normally? Or is it caused by something else?
Here are other things about my BA that may or may not be related to the problem:
-Can't use DOC_Repart to resize storage, I'm getting the FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed as described here http://forum.xda-developers.com/showthread.php?t=255585
-When upgrading the upgrade program can't detect my current OS version (showing blank under "Your device is about to be update from:"), but otherwise the upgrade works fine.
-I tried Helmi R0, PDA Viet , and xplode's 6.00 roms. They all give me the same problem
Thanks.
I am also experiencing the same issue... currently phone is at white scren, but using My Mobiler i can see my desktop and see that the phone is fully functional, just white screen so cant use...
Mine too. I can see the display working perfectly using SOTI pocket controller pro. So the phone seems to be functioning except for some reason the screen is showing all white screen.
cubangt, are using an extended battery or the standard battery that comes with the phone?
Have you tried flashing with a different rom??
Sorry, I fear my message won't be useful at all for you, but I'll post it just for the record. I hope you can find the solution to your problem anyway!
My BA now can't show anything but a white screen because of what I think is damage to the screen cable (while sliding the display the backlight goes on and off...).
But the cable is not loosely connected, it is sort of strongly bent at one point, and maybe some contacts got kind of cut. Now it does not work anymore, but some time ago switching it off and the on again used to do the trick: the display would be readable again (even though with annoying colours, stripes and so on). I don't think this is your case, but I'd like to warn the newbies like myself that they should care not to lose any piece while changing the LCD on their BA: I think I probably forgot about some sort of protection which could avoid damages to the cable in its movement.
As for the missing version number when upgrading, the same has always happened to me.. I think.
Ok, sorry for my English, I would have had some troubles with exposing these few silly things even in my mother tongue... bye... and good luck.
I tried 3 different WM6 roms. And if I remembered correctly this also problem also occurred for a brief while I downgraded to WM2003SE while trying to resize the storage(which failed).
Yeah I'm not sure if mine is a hardware problem, since I can always go into the bootloader and the display works fine there.
I have new info to add though. I found out I can reliably get rid of the problem by draining the backup battery. Now I have a new question, since draining the battery takes a while, is there a way to reset the phone as if the backup battery is emptied (and return my display to normal)? If I can find a way to simulate this, then I can actually use my phone again, even if I have to do this once a day.
Obviously soft reset doesn't work. And I don't wanna do a hard reset either. Maybe the experts here now what kind of data is reset when all batteries are completely drained.
Thanks for the help
hmmmm
quick thinking.....i was working on my phone tonight and came across this thread.....if not grounded properly it could be that you statically fried a component in the process?
Before I start I know how touchy people are about searching forums and the wiki etc... but I already have!
Ok so, I tried to flash a new ROM to my phone last night, I have done it before without problems however this time I was having trouble getting the phone to connect to my laptop (I run Windows 7). Both USPL and HSPL wouldn't work (in fact active sync wouldn't even recognise it).
So I went to bed, woke up and... My phone didn't work at all
I spent ages trying to get it too work, I tried putting it into bootloader, but nothing happened, I tried getting it to Hard reset, but nothing happened. (By nothing happens i mean the screen doesn't turn on).
The only sign of life i get from it is the little vibration that usually occurs after the 'smart mobility' screen appears. Except this is delayed by about 10 seconds from after pressing the Power button.
The delay makes me think that there is something else wrong with the phone other then the screen...
Please help!!
Oh and I am sorry for the essay... I only just realised how long and rambling it is haaa.
UPDATE: right it just connected to activesync but still nothing on the screen, is there any way of checking for definite that the screen is broke before I fork out for a new one? There is astill the massive delay between turning the phone on and getting the little vibration...
Try removing battery overnight, then re-inserting. Then try to get to bootloader or hard reset
how exactly did you manage to brick it? did you flash the rom in question with uspl, or do u generally have hard spl installed? i dont know but it looks like the bootloader is somehow broken ...
Ok I will try doing that, thank you for helping
And no, I didnt get as far as flashing the ROM because active sync never recognised the phone in Bootlaoder. I usually use USPL.
Did you fix it? and if so how?
I have very similar issues with my HD right now. Screen went black, bought a new LCD and still the same problem. Oddly enough the only way I can get the screen to come on is to take the battery out and set both battery and phone body in my window sill for half an hour or so. It is cold here right now and they are both pretty cool to the touch when I take them out. Put it back together and tada! Screen comes on. I dunno what the deal is also, don't know if its the battery or phone being cold that makes it work again??? I am going to try and figure it out.. Try it on yours it may help
Hello.
First post here and hoping someone out there has a solution for my issue.
My HD2 gets stuck on the "quietly brilliant" screen every time I try to boot it. The only thing which happened directly before was that the battery was low and it switched off. This has happened before, but usually when I plug it in to charge it can just turn back on, or if not plugged in then tries to turn on but turns off again. The amber light comes on when it's plugged in to the charger, and it has been charged for enough time that it should turn on as normal.
I'm not as tech-minded as most of you so I'm kinda fumbling around trying to make something work.
I have tried:
Soft reset (multiple times, at different points in the loading (ie when it has the red writing bottom left before freezing, during "quietly brilliant" animation, and after freezing.
Turning on with memory card out.
Turning on with sim card out.
Turning on while plugged into charger.
Turning on when plugged into usb.
The phone will not:
Boot fully
register when plugged into PC
But it will enter bootloader mode (did I get the right terminology? With the Colour banding?)
When in this mode it either displays "Serial" or "USB" (if connected to PC)
I'm desperately trying to avoid a hard-reset as I've spent quite a long time manually entering contacts etc which aren't backed up (all would be lost ) and getting twitter/youtube/facebook all that jazz set up, along with programs and BSB tweaks, Dutty's task manager etc etc set up.
Have also spent time changing the theme with HDWall, and removing curtains/backgrounds etc with the TOUCH X tweaks. I've finally got my phone just how I want it...the biggest thing, of course is losing all of my contacts though.
I just have a HTC rom installed (can't remember what it was called, but nothing fancy, just the normal one to replace my TMobile rom).
Would really appreciate some advice/insight into what is going on and what I can do to sort it. Please help!
N
p.s. yes, I realise it was very stupid to not back up contacts...really really stupid. That will be the first thing I do once this is sorted!!
Oh and it won't turn off using the hang-up button when it's frozen-I have to remove the battery.
nudilover said:
p.s. yes, I realise it was very stupid to not back up contacts...really really stupid. That will be the first thing I do once this is sorted!!
Click to expand...
Click to collapse
If you use Exchange, all your contacts are stored in Exchange...which has the immediate benefit of backing them up, and the other benefit of making them sync with Outlook/OWA.
>: /
Hi there,
Thank you for your reply, I'll bear that in mind next time. But for now - how would I be able to check this? I'm really not sure if I set this up. Can I check it on my PC? I have Office 2007.
N
Ok...so I've found some of my contacts in my Outlook. Guess they weren't updated very recently but at least some are there. I can do a hard reset if I MUST...but please does anyone know of anything else I can try?
And if I leave it overnight is it best to leave it frozen/switched off/charging/battery out?
Will head off to bed soon as it's nearly midnight here and I've got work tomorrow.
N
Try to flash with another radio, you don´t miss your contacts if you do.
Some roms block with some radios.
hope it solves your problem
Ok, I'm going to try it. Found the old .nbh file and it was the 1.66 rom. So just trying to find the right radio one now. Thank you for the tip
Have tried 2 different Radio versions now and still sticks on the same screen on satrtup...is it hard reset time?
Feel like I'm speaking to myself here!! Ah well!...an update. DId a hard reset, and my lovely HD2 is alive and well (albeit looking far too "fresh out of the box"). While I'm at it with nothing back...is there a "better" standard ROM than 1.66 to be using? Anything newer? I'm never sure about these things.
Thanks for your patience and consideration guys...I'm a bit of a noob girl when it comes to these things!
Sound like you've installed a customized ROM. If its the case try to find out what is the best Radio for that ROM and re-install it.