Hi, nobody has problem with this things? After each restart, Resco keyboard is changed back to default keyboard and Igo 8.0 after fixing is periodically fixed and unfixed each second. Igo 8.3 shut down during start screen... Rom is 1.40.405.3. What Rom do you have? Or any ideas? Thanx
I have the same issue with Resco Keyboard. But not any problem with iGo8.XXX
Resco solved by cooked ROM Igo problem is about GPS, not software :-(
Related
Hi,
I am using a Traditional Version of Dopod D810. Everything works except i can't use any 3rd party SIP. Installation is all okay. Just when i select the that 3rd party SIP. It will goes to the default SIP in WM5. Any Ideas?
I did search for the newsgroups and did try to soft reset for several times. It didn't work at all.
Is it a Langauage problem or it is a trinity problem ?
btw: I did try nullkb and tengo. Both didn't work. I did install resco keyboard pro and it works sometimes after soft reset.
Thanks a lot
Calvin
See this post
http://forum.xda-developers.com/showthread.php?t=271008
This question is a nightmare, i´ve tried resco, tengo and others, now i´m with spb full keyboard, i have the same problem with this one cannot select but since you can assign a key to pop it up i will keep it, but this is a terrible flaw in the device.
cheers
I use SPB FullScreenKeyboard. do a search for SipChange as it will solve your problems. Worked for me.
I am desperately looking for a (working!) method to use another keyboard (like the good cootek touchpal keyboard) on my HTC P3600 (WM5). I tried the software IMSelector as well as SIPChange but it works only a few times!I reboot many times but I always keep the default keyboard...
Can someone help me?
Thanks in advance
I'm not sure about free software but I use SKTools and it get me the correct keyboard all the time.
I've got SKTools !
But how to use it?
Hi,
I have an identical problem with the TouchPad or TouchKeyboard installed on my P3600. I've found that removing some of the object on the Today screen help TouchPad to start. So today, i've only a few items (messaging and SBP Diary) on my Today screen.
I also wait a little bit before entering my pin code for the phone until i see touchpad started (it shows the keyboard for a few seconds).
Since then, i "don't" have so much problems.
Ced
Thanks for your help!
what about the pocketcm keyboard?
www.pocketcm.com
i use this on my p3600 (wm6) and it works well.
I already used it but I had the same problem as the touchpal keyboard
nicus said:
what about the pocketcm keyboard?
www.pocketcm.com
i use this on my p3600 (wm6) and it works well.
Click to expand...
Click to collapse
you say you have p3600 with wm6 !?
I've asked htc to know if there is an upgrade to wm6 and they said NO !
how can upgrade my p3600 to wm6?
I'm french, so i want if it's possible an upgrade in french ...
Thank's for your respons
Alternate SIPs not showing up is a well discussed problem in the Trinity forum, having just reinstalled everything on my own Trinity it seems that it is memory related, once the free RAM is below about half then alternate SIPs tend to be reluctant to work reliably.
I have flashed my device to Windows Mobile 6.1.
Then i installed TomTom and manually moved it to the storage Card.
My Problem is, that scrolling with the wheel on the left side of the device does not work.
If I'm in a textfield, scrolling up or down just generates the char '*'.
This is very annoying, if I try to handle the device one-handed.
Is this a configuration-issue which could be fixed?
regards,
Tobias
Does nobody have an idea for solving that problem.
I have recently upgraded to TomTom 7, but the problem remains :/
regards
Tobias
Twardon said:
Does nobody have an idea for solving that problem.
I have recently upgraded to TomTom 7, but the problem remains :/
regards
Tobias
Click to expand...
Click to collapse
Flash an other WM 6.1 perhaps 015 Tnyynt or something else.
Thanks for your answer.
This might fix the problem.
But as i've spent a lot of time finding the perfect image and customizing it - I don't want to re-configure everything...
Maybe someone else has a more spezific solution to the problem?
Check the configuration file in the touchflo folder (under device\programs).
If you edit it, probably you'll find tomtom.exe in the escluded programs.
Just delete the entry (only tomtom.exe).
regards
I don't mean the Touchflo Scrolling.
My Problem is scrolling with the jog-dial wheel on the left side of the device.
Touchflo scrolling in TomTom doesnt work anyway.
regards
Tobias
Problem solved.
It's a bug of tt7 7.450.9028 fixed in the new version of tomtom7 7.450.9030.
Search for it in the web and replace the tom tom navigator.exe file with the new one.
Perfectly working now on my Trinity
Blue version:
http://rapidshare.com/files/142143041/TT7.450.9030_PDA_qvga_blue.rar.html
Black version:
http://rapidshare.com/files/142267805/tomtom_navigator_7.450.9030.cab
jog dial wheel on Kaiser still doesn't work with 9030
donapalmas said:
Problem solved.
It's a bug of tt7 7.450.9028 fixed in the new version of tomtom7 7.450.9030.
Search for it in the web and replace the tom tom navigator.exe file with the new one.
Perfectly working now on my Trinity
Blue version:
http://rapidshare.com/files/142143041/TT7.450.9030_PDA_qvga_blue.rar.html
Black version:
http://rapidshare.com/files/142267805/tomtom_navigator_7.450.9030.cab
Click to expand...
Click to collapse
It seems the link is dead, anyway I've download tomtom7 7.450.9030 from elsewhere to try on my kaiser, but unfortunately, it doesn't solve the issue with the jog dial wheel of the kaiser. It still doesn't work with this new version. Instead, still used for volume
Has anyone had any trouble running iGO 8 with WM6.5? On my vogue, it's always freezing at the "starting" stage of the startup screen. I haven't tested it on WM 6.1 so I'm not sure if it's a problem with 6.5 specifically or the vogue. Anyone have similar experiences?
If I remember correctly IGO8 does not like the internet assisted aspect of the internal gps chip. You must disable the internet feature in the registry and use unassisted gps only. Sucks when your gps locks are unreliable so I always carried a bluetooth gps module when using IGO8.
I have to prime the gps on mine with something like AstroGps Launcher or it will not work. Search for iGo8 launcher here in the forums and you will get up and running in no time.
The search didn't turn anything up but it looks like the priming trick did work. I'm just using GPS viewer but it looks like if i use "open GPS" it launches fine. Thanks so much!
edYYZ said:
The search didn't turn anything up but it looks like the priming trick did work. I'm just using GPS viewer but it looks like if i use "open GPS" it launches fine. Thanks so much!
Click to expand...
Click to collapse
Don't forget about GPSGate! I'm using WM6.1, aGPS, and GPSGate to get my iGo8 running. Gets sat lock faster.
I found a link to the launcher Here you go.
Thanks! Maybe I'll give GPSGate or Astra a try.
edYYZ said:
Has anyone had any trouble running iGO 8 with WM6.5? On my vogue, it's always freezing at the "starting" stage of the startup screen. I haven't tested it on WM 6.1 so I'm not sure if it's a problem with 6.5 specifically or the vogue. Anyone have similar experiences?
Click to expand...
Click to collapse
if you added the speed cams folder, it takes igo 8 a little while longer to boot due to loading the speedcam txt files
edYYZ said:
Has anyone had any trouble running iGO 8 with WM6.5? On my vogue, it's always freezing at the "starting" stage of the startup screen. I haven't tested it on WM 6.1 so I'm not sure if it's a problem with 6.5 specifically or the vogue. Anyone have similar experiences?
Click to expand...
Click to collapse
I've installed NFSFAN's V12 (WM 6.5) and tried to use iGO8 and encountered similar problem of freezing up at starting page. Any input is appreciated.
Desi Chookrah LOL,
in NFSFAN's rom there is a folder under system tools. In it you will find GPS Viewer. Run that program (com port should be 4) and click open GPS. while this is running, start IG8 up. make sure in IGO8 you scan for ports and it should pick up where your GPS is.
I use astrogpslauncher to avoid this problem.
edYYZ said:
Has anyone had any trouble running iGO 8 with WM6.5? On my vogue, it's always freezing at the "starting" stage of the startup screen. I haven't tested it on WM 6.1 so I'm not sure if it's a problem with 6.5 specifically or the vogue. Anyone have similar experiences?
Click to expand...
Click to collapse
ah ha now i understand your thread better as i am having the same problem. all was working good then i tried to start igo today and it freezes up and i have to soft reset. and try igo again and it says something like "igo did not start up last time, would you like to reinstall poi's" or sumthing. i have hard reset 3 times still nogo NO PUN lol idk wats wrong here
I went back to NFSFAN's 6.1 ROM till this issue gets resolved.
Desi_Chora said:
I went back to NFSFAN's 6.1 ROM till this issue gets resolved.
Click to expand...
Click to collapse
is igo having issues on 6.1?
no issues with TT7.
jadesse said:
no issues with TT7.
Click to expand...
Click to collapse
thanks ill keep that in mind
igo8
Me I have igo8 with laugher and is running perfect. My system is NFSFAN's 6.5 ROM V13.
If you open up GPS viewer and "open GPS" before launching iGo then it starts up with no problems!
edYYZ said:
If you open up GPS viewer and "open GPS" before launching iGo then it starts up with no problems!
Click to expand...
Click to collapse
pfft. igo works fine with APGS. I've been using it since it was fixed (agps that is) and I have no trouble with igo8. I get a lock in about 4 seconds.
iGO Resolution on HTC Vogue
How do you change the resolution of iGO on vogue, I have it running using the gps viewer before I launch iGO but the resolution needs to be adjusted.
Hey Guys,
I have a problem wit the combination SlideIT and TomTom.
I have installed TT on my SD card and installed the autorotate.cab for TT.
When I run TT and put it in landscape the SlideIT keyboard shows up and I can not get away anymore...
Any Solutions??
Don't think this issue is related to Tom Tom at all. I had the trial version of SlideIT installed on my X1.
When ever I slid open the keyboard, the screen rotated I had the same problem with SlideIT opening up. If I closed SlideIT, then it opened up again when I slide the keyboad back.
Didn't find any solution to the problem.
-- Mike
Bazzz66 said:
I have a problem wit the combination SlideIT and TomTom.
I have installed TT on my SD card and installed the autorotate.cab for TT.
When I run TT and put it in landscape the SlideIT keyboard shows up and I can not get away anymore...
Click to expand...
Click to collapse
Not directly; but I have TT Nav. 6 working on the HD2 and I used BsB Tweaks to enable landscape mode by tilting the device. It works perfectly.