Related
has anyone else problem with the htc home customizer??
i need to take a hard reset after rebooting
Same thing
You have to change the originale HTC Home with Kaiser.HTC.Home.v2.0.814.722-schen
But i prefer keep 4 tabs 'cause the display is smaller and tabs would became too small
I hv the same problem,
finally I need to restore the backup file ....
I used HHC without installing any homeplugins.
Just installed HHC and modfied the original homeplug from the device.
No problems so far.
But i have a xda star (o2 branded dual), so the roms may differ...
Same here - worked like a charm
Same here it crashed on me!! had to hard reset! I guess it only works with certain touch dual ROM's e.g. O2.
Hi Folks.. just tried the HHC also and cant enter the device lock code.. no response of any soft or hard key of my nike (o2 xda star)
any chance to solve that without hard reset? made so many customizations without backing up
Hi guys, when you installed the customizer into the phone, did you ever see an error message "Can't find the tapsetting" ? I guess this is the main problem ....
DO NOT touch the "Tabsetting" key!!
i tried to manually add the "Tabsetting" key under HTCHome... now, like after installing HHC, all soft & physical keys not responding.
hard reset in progress...
-------
(further update)
seems the HTCHome version can really handle this key... yet i couldn't find the right data type and data value to enable the music player tab.... i could only find some possible values that lead to zero tab or disabling all soft & physical keys.
Guys,
I've a worster problem that is after install htc customizer my touch Dual goes nuts and neither soft and hard reset solved the problem.
I say worster, because at this moment I even can't start my Touch Dual. It block always or in windows screen or in PIN screen and don't let me write anything.
I don't have more ideas.
CAN ANYONE HELP ME PLEASEEEEEEEEEEEEEEE?!?!?!?!?!?!?!?!
t0p0gigi0 said:
Guys,
I've a worster problem that is after install htc customizer my touch Dual goes nuts and neither soft and hard reset solved the problem.
I say worster, because at this moment I even can't start my Touch Dual. It block always or in windows screen or in PIN screen and don't let me write anything.
I don't have more ideas.
CAN ANYONE HELP ME PLEASEEEEEEEEEEEEEEE?!?!?!?!?!?!?!?!
Click to expand...
Click to collapse
Done
Stupid manual..... say to do ENTER to reset phone, but do not specified that enter is not exactly the enter key of keypad but it's the key in middle of direction cursors that is between RED and GREEN keys.
At least I hope this helps anyone.
UK Orange Touch Dual here, no problem with HHC at all
U have to change the language of the HHC, i had the same problem with italian HHC and English Home plugin.
After reboot, WM6 don't loads. ( sorry 4 my bad english )
Haven't encounter no problems, works smoothly and nicely.
Hey guys,
As the title says Ive got a very annoying problem with my xperia. Problem is that the right function keys (silver one) assigned action always changes from "right function key" to "Today" upon restart.
Id like to not do a hard-reset if possible. Anyone got any suggestions how to make sure it sticks with what action I assign to it?
Cheers
Agaas said:
Hey guys,
As the title says Ive got a very annoying problem with my xperia. Problem is that the right function keys (silver one) assigned action always changes from "right function key" to "Today" upon restart.
Id like to not do a hard-reset if possible. Anyone got any suggestions how to make sure it sticks with what action I assign to it?
Cheers
Click to expand...
Click to collapse
sounds to me like the assignment isn't "sticking" in the registery and goes away after restart. try a registery editor and manually assign the key to the program you want.
Agaas said:
Hey guys,
As the title says Ive got a very annoying problem with my xperia. Problem is that the right function keys (silver one) assigned action always changes from "right function key" to "Today" upon restart.
Id like to not do a hard-reset if possible. Anyone got any suggestions how to make sure it sticks with what action I assign to it?
Cheers
Click to expand...
Click to collapse
i have the same problem. do you have tf3d installed ?
yes I do have tf3d installed. which registry key should I change?
I have the same problem. In addition to tf3d I installed the cab that enables to make a panel out of it. Help?
Use AEBPlus to re-assign the key(s). For each hard keys, you get 4 different actions. You will appreciate what u can do with the hard keys!
Also mine after installed touchflo3d.
Guys, remove TF3d! We have a Xperia, X-panel is more than enaught.
gohyc said:
Use AEBPlus to re-assign the key(s). For each hard keys, you get 4 different actions. You will appreciate what u can do with the hard keys!
Click to expand...
Click to collapse
doesn't work in my x1. something keeps changing the registry value back ... :-(
yep I had this problem too when I installed TF3D. In the end I uninstalled it because I wanted the right button mapped to voice command and it got annoying having to remap it after every soft reset
if someone has successfully stopped it automatically setting it to "today" please tell us how
I am using Touch-HD Manilla instead of TF3D and don't have this problem. Why not use Touch-HD Manilla instead? From what I read, this is faster than TF3D.
gohyc said:
I am using Touch-HD Manilla instead of TF3D and don't have this problem. Why not use Touch-HD Manilla instead? From what I read, this is faster than TF3D.
Click to expand...
Click to collapse
which cab are you referring to ? if you can point me in the right direction i'd be grateful ...
http://forum.xda-developers.com/showthread.php?t=442154
Post 1, Manilla HD Full
or
Post 2 Manilla HD, components
I have only so far installed Manilla HD Full, and have never tried the the individual components.
Interesting, I have this too, and I also have TF3D installed as a panel...
NZtechfreak said:
Interesting, I have this too, and I also have TF3D installed as a panel...
Click to expand...
Click to collapse
and you're using manilla hd full ?
Yes, am using Manilla HD Full. Also installed the T3FD panel, but later removed it.
I am on ROM 1.02 (was on ROM 1.01 also) by Jack Leung, AEBPlus works on both with Manilla HD Full installed. Didn't bother to install the panel.
I have Touch HD,but I also have this problem,why...
Just curious, are you on the original rom?
I understand some ROMs, the email signature also doesn't get saved. Wonder if this is a related issue.
Hi, on Diamond, when I pressed reset buton in 3 sec interval after hard reset the customization stops. On Jade after pressing reset button customizations starts again. Anybody know, how to stop it?
Hi!
Did you try immidiately after the hard reset?
If the problem persist will be a very big problem for all! I am waiting for the Jade and I also don't want to install all the software because I need a lot of memory!
I do hope that anybode can cook soon a new rom in order to get more memory...
Let us know if you will be able to solve this problem!
Alekss_UH said:
Hi, on Diamond, when I pressed reset buton in 3 sec interval after hard reset the customization stops. On Jade after pressing reset button customizations starts again. Anybody know, how to stop it?
Click to expand...
Click to collapse
I received today my new Jade. Well, I didn't be able to stop the customization! I think that we have to wait for a new cooked rom!
Alekss_UH said:
Hi, on Diamond, when I pressed reset buton in 3 sec interval after hard reset the customization stops. On Jade after pressing reset button customizations starts again. Anybody know, how to stop it?
Click to expand...
Click to collapse
Anyone could solve this thread??
Alekss_UH said:
Hi, on Diamond, when I pressed reset buton in 3 sec interval after hard reset the customization stops. On Jade after pressing reset button customizations starts again. Anybody know, how to stop it?
Click to expand...
Click to collapse
plvigo said:
Anyone could solve this thread??
Click to expand...
Click to collapse
Not sure what the question is. To stop what customisation?
If you hardrest Jade, it will default to factory settings.
azahidi said:
Not sure what the question is. To stop what customisation?
If you hardrest Jade, it will default to factory settings.
Click to expand...
Click to collapse
After an hard reset, the system install all the software to restore the default setting (including, manila, opera, etc.). Well, in all the other device, if before 3 seconds, after a hard reset, you stop the customization, all these softwares will not be installed. So, you will gain, for example, at least 20-25 Mb in the storage memory.
Anyone have a stripped rom (without manila and opera)?
plvigo said:
After an hard reset, the system install all the software to restore the default setting (including, manila, opera, etc.). Well, in all the other device, if before 3 seconds, after a hard reset, you stop the customization, all these softwares will not be installed. So, you will gain, for example, at least 20-25 Mb in the storage memory. Anyone have a stripped rom (without manila and opera)?
Click to expand...
Click to collapse
Now, I understand, however sorry can't help you mate. I guess.. like you said
plvigo said:
I received today my new Jade. Well, I didn't be able to stop the customization! I think that we have to wait for a new cooked rom!
Click to expand...
Click to collapse
a new cooked rom would be the solution.... sorry mate can't cook.
That was usefull to avoid "vodafonization" of the touch, but it seems that doesnt work.
In my case first install system and programs from htc.
Then request for a calibration and finally appears a prompt to click for start touchFLO, then appears a message "3 seconds for vodafone customization" and then it starts.
I wan to to stop vodafone customization, but i havent be successful doing a softreset, always restart with htc installation continues with calibration and installing vodafone customization.
Is there a way to manually start the TF3D? Sometimes it takes up to 5 resets to start. Really annoying, since I don't want to hard reset the device...
Hmmm, should start every time if you have it in the today settings.
Check: Start - Settings - Today - Items (bottom of screen) - scroll down to TouchFLO 3D and make sure it is checked. Best to uncheck everything else as TF3D generally conflicts with other today plugins.
Cheesy Dave said:
Hmmm, should start every time if you have it in the today settings.
Check: Start - Settings - Today - Items (bottom of screen) - scroll down to TouchFLO 3D and make sure it is checked. Best to uncheck everything else as TF3D generally conflicts with other today plugins.
Click to expand...
Click to collapse
Yes, it's there and checked. Nothing else is checked and I have no other today plugins installed.
jouh said:
Yes, it's there and checked. Nothing else is checked and I have no other today plugins installed.
Click to expand...
Click to collapse
Hmmm ! Sounds like maybe a manila file is messed up. I guess your best bet is a hard reset.
Alternatively you might try installing a TF3D theme from the forums and see if that fixes it.
Sorry, I can't help much more than that (I've never experienced this problem).
Cheesy Dave said:
Hmmm ! Sounds like maybe a manila file is messed up. I guess your best bet is a hard reset.
Alternatively you might try installing a TF3D theme from the forums and see if that fixes it.
Sorry, I can't help much more than that (I've never experienced this problem).
Click to expand...
Click to collapse
Thank you for taking time and trying to help me!
Perhaps a hard reset would be in place...
Hey Guys,
I have an HTC Touch Pro 2 and everything was working fine and all of a sudden I lost the TF3D interface and am now back to the Win MO 6.1 interface. I did a soft reset several times with no luck.
Is there any way of getting it back without doing a hard reset. Would appreciate help on this one.
Thanks
calsi said:
Hey Guys,
I have an HTC Touch Pro 2 and everything was working fine and all of a sudden I lost the TF3D interface and am now back to the Win MO 6.1 interface. I did a soft reset several times with no luck.
Is there any way of getting it back without doing a hard reset. Would appreciate help on this one.
Thanks
Click to expand...
Click to collapse
Open your start menu, select "settings". On the first tab, choose "Today"
On the next screen, choose the "items" tab, and then you'll see a checkbox in the list for TouchFLO 3D, just check that, then hit "ok" to exit. When you return to the home screen, you should have TF3D back.
This is the method to turn TF3D on/off when you're doing things like installing cabs that change the look of TF3D in any way.
Touch FLO 3D Back again
Sirphunkee,
Hey, I followed your instructions and my TF3D is back again. Man you saved me because I was considering a hard reset. By the way I did install new cabs for the Home screen.
Thanks a million.
P.S. I had seen that screen once before but never had any need to use. I won't forget this one again.
calsi said:
Sirphunkee,
Hey, I followed your instructions and my TF3D is back again. Man you saved me because I was considering a hard reset. By the way I did install new cabs for the Home screen.
Thanks a million.
P.S. I had seen that screen once before but never had any need to use. I won't forget this one again.
Click to expand...
Click to collapse
Glad to help!
Yes, any time you run cabs that change the appearance at all, it's always a good idea to turn TF3D off first, just to make sure there's no issue with the cab accessing files etc that it needs to modify.