I have trouble with run igo I correct (sys.txt) for run on storage card also I correct for resolution but when I run igo it's appear and shut down after appear for half second every 10 seconds and disapear help what's wrong.
I have version without exe - I use autorun installation after exe appear on the diamond in programs files. I copy this exe in folder with program ....
You're not using Igo for Diamond (I had the same problem)... Where did you get this version ?
JAYmasta said:
I have trouble with run igo I correct (sys.txt) for run on storage card also I correct for resolution but when I run igo it's appear and shut down after appear for half second every 10 seconds and disapear help what's wrong.
I have version without exe - I use autorun installation after exe appear on the diamond in programs files. I copy this exe in folder with program ....
Click to expand...
Click to collapse
I have iGO8 8.3.1 working fine, post your sys.txt.
also you should know that version 8.3.1 is NO WAY NEAR as good as 8.0.49 or 8.0.59 there are so many features missing on the 8.3.1!!
for example:
auto capitalisation missing in 8.3.1
longer GPS fix time
cannot change the trip meter when no route is active, it only displays compass and altitude
speedcams done show up all the time
much heavier on phone resources
PM me if you need more help!!(technically iGo 8 isnt for the diamond (yet), so may get in trouble talking here!!)
I have iGo 8.3.1 running perfectly on my device. I copied everything in the internal memory then ran installation from 2577 folder. No need to change sys.txt. Everything runs fine. I run Igo clicking on igo.exe in the igo8 folder
I suggest going with 8.0.x either rather than trying 8.3. It was very unstable and laggy on my diamond. Theres no need to try. The new features are not worth the stress. Pity is, that the new map versions dont work with 8.0.x. But that will be a matter of time, i think...
MysticGenius said:
Remove this you will be banned!!!
Click to expand...
Click to collapse
He means: the link...
No problem for the sys.txt
But, please, NO WAREZ on this forum...
Belzebuth. said:
He means: the link...
No problem for the sys.txt
But, please, NO WAREZ on this forum...
Click to expand...
Click to collapse
Removed, no WAREZ allowed. Next WAREZ post will result in ban. Thank you.
I repeat when I donwload igo was 2 folder inside one autorun inside second almost program without (exe) I started autorun and go process instalation after exe appear in program files directory. afer I create folder on the Internal Storage (Igo8) I've copy this exe inside this folder and all files from second folder, and change sys.txt like this :
[folders]
app="Internal Storage\igo8"
sdcardapp="Internal Storage\igo8"
sdcardpath="\Interal Storage"
data="\Internal Storage\igo8"
content="\Internal Storage\igo8\content"
texture="\Internal Storage\igo8\content"
save="\Internal Storage\igo8\save"
custom="\Internal Storage\igo8\custom"
[interface]
maxzoom2d=6000000
show_exit=1
[gps]
set_messages=0
[interface]
vga=1
[rawdisplay]
screen_x=480
screen_y=640
highres=1
[sound]
mute_os_key=1
But my opinion problem not in sys.txt I do something wrong but what ?
JAYmasta said:
I repeat when I donwload igo was 2 folder inside one autorun inside second almost program without (exe) I started autorun and go process instalation after exe appear in program files directory. afer I create folder on the Internal Storage (Igo8) I've copy this exe inside this folder and all files from second folder, and change sys.txt like this :
[folders]
app="Internal Storage\igo8"
sdcardapp="Internal Storage\igo8"
sdcardpath="\Interal Storage"
data="\Internal Storage\igo8"
content="\Internal Storage\igo8\content"
texture="\Internal Storage\igo8\content"
save="\Internal Storage\igo8\save"
custom="\Internal Storage\igo8\custom"
[interface]
maxzoom2d=6000000
show_exit=1
[gps]
set_messages=0
[interface]
vga=1
[rawdisplay]
screen_x=480
screen_y=640
highres=1
[sound]
mute_os_key=1
But my opinion problem not in sys.txt I do something wrong but what ?
Click to expand...
Click to collapse
Wich language is your ROM? WWE or another?
If it's WWE, put this in your sys.txt:
[device]
sdcard_dsk_num=7
It worked for me...
All credits to matroxer...
If not, read this whole thread: http://forum.xda-developers.com/showthread.php?t=403325
I dont know where you are all getting your software, but the versions you are all talking about are really poor.
I have the following:
Nav N Go iGo v8.0.0.54000 & Nav N Go iGo v8.3.1.57021 - WORKING 100%
and the sys.txt for both is:
---------------------------
[folders]
app="%SDCARD%/iGO8"
[interface]
maxzoom2d=6000000
show_exit=1
[map]
3d_max_tiltlevel=9000
---------------------------
in both of my installs there are 2 files:
2577
iGO8
and that is it, i have had no messing around with sys.txt, I do not have to go looking for program exe's with total commander or sending shortcuts anywhere.
With the versions i have, and this install procedure works for both releases of iGO8:
1, copy 2577 & iGO8 to internal storage
2, unplug phone from usb
and that is it, and you even have the added bonus of having startmenu shortcuts installed!! WOOP
also as another great feature of the way my installs work is when you flash a new rom, the first thing to popup after typing in your pin is the install screen for iGo8 and all settings/favourite locations/etc are all kept in tact!
I have compiled both of these myself from bits and pieces from various different sites and they are not available for download on any site in the configuration i have made.
just as a side note, it was me who got iGo v8.3.1.57021 to work at all on the HTC Diamond!!and variants have propogaed through the internet which dont work as well.
Obviously i cannot/will not post links in this forum as i will get banned. and i have not posted links on any other sites to this software.
BUT IF YOUR INTERESTED IN WHAT IM SAYING PM ME!!
Igo 8.3.1 on diamond
try another version of igo...
iGo v8.3.1.57021 - on my diamond dont working...
but the version 8.3.1.54384 - work very well with this configuration:
file SYS.TXT:
[folders]
app="Memorizzazione interna/iGO8"
[interface]
maxzoom2d=6000000
show_exit=1
[map]
2dheadup=1
I confirm that this works, added to the sys.txt
[device]
sdcard_dsk_num=7
thanks mr. Belzebuth
You're welcome...
JAYmasta said:
I confirm that this works, added to the sys.txt
[device]
sdcard_dsk_num=7
thanks mr. Belzebuth
Click to expand...
Click to collapse
Nice to see it works for you...
Like I said: "All credits to matroxer..."
semplice said:
try another version of igo...
iGo v8.3.1.57021 - on my diamond dont working...
Working 100% on my Diamond
seeya
Click to expand...
Click to collapse
For more solutions with iGO8 troobleshooting: http://forum.xda-developers.com/showthread.php?t=403325
It's better to post all problems and solutions in 1 thread, easier to find solutions for other members...
All that has to be done is
In SYS.TXT
Change the SD card to the name of your internal memory.
ON Diamond if your SYS.TXT sais SD card IGO will not work!
hello guys
I igo8 works well on diamond
but I have a problem
the diamond after a few seconds to go on hold and the screen goes black.
in theory it is right but with no navigation program.
How can I do to stay on?
ciao ragazzi
a me igo8 funziona benissimo sul diamond
ma ho un problema
il diamond dopo un po di secondi va in attesa e lo schermo diventa nero.
in teoria รจ giusto ma con un programma di navigazione no.
come faccio a farlo rimanere acceso?
grazieeee
Works fine on my Diamond (Vodafone) , but have problems with the TMC, it picks up signal (GNS GPS & TMC Receiver) from RDS radio stations, but does hold on the frequency and does not alert of any traffic jams.
Also I have not been able to find a U.K map with the full 7 digit postal code entry (only seems to have 4 or 5 digit entry I.E SE26 then it brings up code that relate to SE26 you sill have to entry the road name, this seem to be stepping back to prior version 8.0x
tcf1962 said:
Works fine on my Diamond (Vodafone) , but have problems with the TMC, it picks up signal (GNS GPS & TMC Receiver) from RDS radio stations, but does hold on the frequency and does not alert of any traffic jams.
Also I have not been able to find a U.K map with the full 7 digit postal code entry (only seems to have 4 or 5 digit entry I.E SE26 then it brings up code that relate to SE26 you sill have to entry the road name, this seem to be stepping back to prior version 8.0x
Click to expand...
Click to collapse
but diamond have TMC ?????
AFAIK there is no TMC in Diamond.
Related
is anybody running igo8 successfully on a 914c ?
It keeps crashing during start with a exception error.
any help ?
thanks
go to my device/program file/igo8
edit the "sys.txt" on your home pc by adding
(backup your orig file!!!)
[interface]
resolution_dir="240_320"
vga=0
[rawdisplay]
class="landscape"
[debug]
skip_eula=1
let me know if it works
good luck
To get it working for me I had to add the following to sys.txt
[device]
type="hp910c"
I also switched over to OnCourse Navigator. It is pretty much the same prog but TTS WORKS!
ok both doesnt work ... still get the exception fault ... any other ideas ?
thanks guys
TESTED THIS ONE ON THE 900:
[device]
type="hp910c"
AND IT WORKS
I HAD TO ADD THE GPS COM 6... LIKE ON THE 600
1) TAKE OUT YOUR CARD AND UNINSTALL IGO (IF YOU CAN)
2) DELETE IGO8 DIR FROM PROGRAM FILE OF THE DEVICE
3) ENTER IGO8 DIR IN YOUR CARD AND EDIT THE SYS.TXT FILE
[device]
type="hp910c"
[GPS]
port=6
baud=57600
set_messages=0
4) INSERT THE CARD ( FOR THE INTALLATION....)
IF IT DOESN'T WORK ,CHECK YOUR IGO VER
GOOD LUCK
I confirm that it works with the last settings of EREZYAD
@+
ok worked .... did something stupid but its cool now !!!
thanks a lot !!!
Any C R A C K E D versions out on rapidshare?
Grga001 said:
Any C R A C K E D versions out on rapidshare?
Click to expand...
Click to collapse
Read the rules before posting that or you will be BANNED
Well, I have no probs with starting (IPAQ 914c & latest iGO8 v8.3.2.64873) but strange thing happens when I try to change power management settings in iGO. When I change default value "Use Device Settings" to "Always On", my ipaq`s screen turns off whenever I plug charger in. As soon as I unplug charger, screen turns on. After that, only solution is factory reset. Did anyone had same probs?
Cheers!
I could never get the old iGO8 to work on iPAQ 910c. I managed to get the "borrowed version" (8.3.2) installed and loading with no problem or errors, except that it's saying my paid maps are outdated and then I can't exit the application or do anything after except soft reset. The Naviextra Toolbox does not detect my SD or my mobile device to update it anymore either. How can I uninstall this thing so I can try installing my old one back (want to try one of the solutions mentioned above to see if it works)?
It does not show up in remove software, and I see no way that I can get rid of it. what do I do? just delete it from Program Files?
igo 8 fixed for 910c, 914c
http://forum.ppcwarez.org/viewtopic.php?f=57&t=57546
Yes I do,
update your sys.txt file in the root of your program file folder iGo8 as follow:
[folders]
app="%SDCARD%/iGO8"
[interface]
resolution_dir="320_240"
vga=0
[rawdisplay]
class="landscape"
[debug]
skip_eula=1
[device]
type="hp910c"
[timezone]
sync_os_timezone=0
reset_os_timezone=0
[gps]
port=6
baud=4800
set_messages=0
Hi
Can anybody help with starting IGO 2006 on 914c?
It start with incorrect 320x240 mode but "freezes" on language selection dialog.
Help please if someone knows the solution
well ive got a hacked data.zip file which makes it run normally. comce to priv for details...
Verticalx said:
Hi
Can anybody help with starting IGO 2006 on 914c?
It start with incorrect 320x240 mode but "freezes" on language selection dialog.
Help please if someone knows the solution
Click to expand...
Click to collapse
Same problem, but with iGO8 on hp voice messenger?
help!
Hi all,
Yesterday I upgraded my Polaris Rom from official site. Now Igo does not work. When i click the Igo icon; generally do notting, sometimes Igo start but I received an error "HardwareIDerror".
How I can fix this problem.
Best regards....
Igo 8 works great and 8.3.1 works too on my Polaris without any probleme.
What have you in your sys.txt?
I had problems first installing it also, it would hang... where is it installed? I take it, on an SD card... the sys file needs to read;
[folders]
app="%SDCARD%/iGO8"
[interface]
maxzoom2d=6000000
show_exit=1
[map]
2dheadup=1
Also try hard reset, and then reinstalling to the SD card make sure that the sys file reads as above.
My igo also used to hang on "Initializing Warnging Data", don't worry it take about 30-45 mins to try ang get geo locations for all of your contacts.
Happy de-bugging
Work fine on my device.
But must turn off touch flow(manila2D).
thanks guy I installed IGO8 8.3.1 works fine....
iGO8 Problem - Fatal Error
Hi Guys!
I've got a problem with iGO8...if i start the program the splash screen is shown...for about 2-3seconds, then a error Message is shown:
Fatal Error
------
Fatal error occurred in main thread.
Adress: 0x001cf010
Exception: 0x80000002
How can i fix this???
igo8 problem
I have not seen this on my P3600 - I have Igo 8.3 with the latest Gurjon skin. IGO needs a minimum of 20MB program (not storage) memory to work. My phone start the day with around 23MB but drops down to under 20MB eventually. When that happens, IGO gets to the splashscreen and then shuts down again. Solution is to do a soft reset to get my program memory back above 20MB. How much available program memory do you have?
24 mb free memory.
tell me which version you are using the radio and rom?
Free Ram
i use Igo 8 too and i have after softreset 30 mb free ram with this rom
but i changethe pagepool of the rom^^ to 3 or 4 mb.
So i have a absolut full rom with 30 mb free ram for igo
017TNYSTD - CE OS 5.2.20273 (Build 20273.1.3.3) WWE
igo8 problem
I have two P3600's in fact, both with igo8.3 and TOMTOM 7.9 on them. One phone is WM5.1 (rom 1.23 and radio 1.50) and the other is WM6.1 (mary v3.7.1 and radio 1.56.7). I will be honest and say igo8.3 is the more attractive to look at when used with the Gurjon skin, I use TOMTOM for serious use as it is more "fat finger" friendly, needs less program memory (16mb) and is easier to follow.
You didn't say if it was igo8 or igo8.3 you had as I remember having all kinds of problem before I "upgraded" via a friendly file sharing site.
the problem still exists with 30 MB of free memory
delete the sys.txt file in the main directory and try again
Put this in SYS.TXT :
[project]
name="igo8_pda"
[folders]
app="%SDCARD%/iGO8"
replaces "%SDCARD%" the path of igo8
I Go 8 Problems
wetche said:
Put this in SYS.TXT :
[project]
name="igo8_pda"
[folders]
app="%SDCARD%/iGO8"
replaces "%SDCARD%" the path of igo8
Click to expand...
Click to collapse
I have tried your solution, I still have the same problem. if i change the city to Birmingham and try to enter a street it gives me the same error. the following is the txt in the sys file:
[project]
name="igo8_pda"
[folders]
app="Storage card/Program files/igo8july/iGO8"
[interface]
maxzoom2d=6000000
show_exit=1
it also cannot locate GPS receiver, any ideas? please help
What I would do is to uninstall and reinstall iGo.
I suggest to add the following lines to the sys.txt
Code:
[debug]
reserve_memory=2097152
btw deleting the sys.txt is a very bad idea.............
schnurzelat
Make sure the resolution is correct!
In my case i had this on my Xperia X1...
[rawdisplay]
highres=0
screen_x=800
screen_y=480
Next i copied the program to my Omnia i900 where it should have been...
[rawdisplay]
highres=0
screen_x=240
screen_y=400
Without changing the settings i got the same fatal error bla bla bla
Good luck!
After a long battel I solved the problem changing the sd card
OUT OF MEMORY
Hi all
My mate just installed Igo8 onto his Diamond but everytime he tryes to load it, it crashes on the blue loading screen!
Does anyone know any GPS Software that works on WM6.5? Or how to get Igo8 working?
cheers
Keith
what is your country? u could try garmin or mapking, these are both nice gps softwares...
Im in the UK
And am currently using BsB 6.5N ROM if that helps
will have a look at these programs mate :-D cheers!
Keefo said:
Im in the UK
And am currently using BsB 6.5N ROM if that helps
will have a look at these programs mate :-D cheers!
Click to expand...
Click to collapse
Tomtom and Igo 8 perfectly running on this rom.
amibumping said:
Tomtom and Igo 8 perfectly running on this rom.
Click to expand...
Click to collapse
How come iGo8 does not work on my mates then???
I have installed it on his diamond over and over, and get the same thing... The blue loading screen pops up, at the bottom as soon as it says "init API" at the bottom right, and then instantly the app closes with no error message or anything :-s
cleanup your sys.txt. Leave there only path to the application.
mjaxa said:
cleanup your sys.txt. Leave there only path to the application.
Click to expand...
Click to collapse
Hmmm not sure what you mean!!
I looked in the sys.txt in the Igo8 folder and it has in it.
"[project]
name="igo8_pda"
[folders]
app="%SDCARD%/iGO8"
[interface]
,axzoom2d=60000000
show_exit=1
[rawdisplay]
driver=gdi"
Already tried removing everything except the Folders one, and it still didnt boot :-( even tried just "app="%SDCARD%/iGO8""
You need to edit the sys.txt file. Instead of SDCARD it should read Internal Storage. This thread should help
http://forum.xda-developers.com/showthread.php?t=403325
I've Igo8 works fine on my Loox 560.
What I have to do/change for install it on my HD2?
Thanks
Yes it works, got it on my SD card, didnt even have to install it just running it from sd card
Same settings as from my previous touch hd
Yes, works great
In my case I get:
"failed to open file:
"ui_igo8\240_400\loading.bmp"
exiting App."
I changed the 400_240 to 240_400 , it passed the install and runs but I can see only half of the igo!
What can I do?
stef2000 said:
In my case I get:
"failed to open file:
"ui_igo8\240_400\loading.bmp"
exiting App."
I changed the 400_240 to 240_400 , it passed the install and runs but I can see only half of the igo!
What can I do?
Click to expand...
Click to collapse
Try this sys.txt:
[device]
type="HTC Touch HD T8282"
[folders]
app="%SDCARD%/iGO8"
[interface]
skin="ui_igo8"
maxzoom2d=6000000
show_exit=1
[sound]
queue_length=200
[msnd]
msnd.start=0
[3d]
show_guidance_strip=1
show_guidance_arrows=1
guidancearrow_first_size=1.5
guidancearrow_first_alpha=24
guidancearrow_second_size=0.8
guidancearrow_second_alpha=12
[debug]
show_oneway_3d=1
show_oneway=1
show_gps_pos=1
skip_eula=1
show_pedestrian=1
poi_labels=1
show_arrows_on_route=1
sound_q_length="200"
enable_roadshadow=1
Click to expand...
Click to collapse
I'd tried everything, it does'nt work for me.
I've been working on that day and night and I despair!
stef2000 said:
I'd tried everything, it does'nt work for me.
I've been working on that day and night and I despair!
Click to expand...
Click to collapse
Is the version u have was working before?
may be the data is not having the required resolution files.
if not, pm me. ill send u link to download working version.
I think you're right, skr_xd. I had the same problem, and was forced to add 800x480 folder to data.
igo8 works fine on the HD2.
You first need to check which resolutions you have on your igo8 Version. Just open the "data.zip" and check the folders in "ui_igo8".
Then you just need to modifiy the "sys.txt" to match the chosen resolution, e.g.
Code:
[rawdisplay]
screen_x=400
screen_y=240
class="landscape"
.
You can leave/comment out the landscape mode if you don't want it.
I have currently 800x480 in landscape mode =)
Try this data.zip it should work
http://www.mediafire.com/?gi0jjo3mzov
If You have PDA version of IGO8,remember that if you change anything in sys.txt,do that on device iGO8 folder,not on card,otherwise you will not change anything(or uninstall IGO8,change sys.txt and then reeinstall,always with a soft reset).
I'd tried everything again and again... doing all your direction - but I'm still lost (no igo...) and desperate.
???
I have another problem...
i can start it and so on.
but once i want to type which city or street.
it goes crazy. like someone try to type super fast all over the letters :s
jisin said:
I have another problem...
i can start it and so on.
but once i want to type which city or street.
it goes crazy. like someone try to type super fast all over the letters :s
Click to expand...
Click to collapse
Had the same problem, look here
http://forum.xda-developers.com/showthread.php?t=575657&highlight=iGO8&page=2
post 15 will solve it
or try this dude's copy that he'll send you a link to if you drop him a pm..
http://forum.xda-developers.com/showpost.php?p=4990929&postcount=12
Thanks you all!!!
After 2 days & nihgts with new ver. igo 8.3 it works on my HD2!
Thanks
thx i will try that
Harmageddon said:
Yes it works, got it on my SD card, didnt even have to install it just running it from sd card
Same settings as from my previous touch hd
Click to expand...
Click to collapse
I have it working like this too but I would like to have it in the Programs menu so I can put it in Quicklinks.
Anyone know how to get it onto quicklinks?
Easiest way to add any program to the today screen I've found so far is:
1)Start Resco file explorer and navigate to the .exe for the program you require a shortcut for.
2)long press on the relevant .exe and from the the menu that pops up select "send to"
3)This pops up another menu where the last item is "Start menu as shortcut"...pick that!
4)Return to the today screen and tap any of your empty shortcut locations (get 20 of them by using "Puremind SP1 Transparency 20 Quicklinks No BG4all_Glass Clock with black digits" like I have) and your program will now be in the list to use!