Related
I've been looking around, but did not find any fix for Re's launcher and slider. The original executable files we're using the system time (i.e. Greenwich meridean time) for the clock. So if your country is not located at 0.00 hours, the time will be all whacked out.
So I had to do it on my own! Here is the "fixed" executable files using Local time instead. I did not do any other modification. This is not my program and do not take credit for any of it, I just changed the time.
Get the complete files from here http://rychlicki.net/en/2007/04/01/174/
Then replace the executable files with mine. Hope you enjoy!
It works. I only have to do the WM2003 regfix and change most of the links
Can't find the options using PHM regeditor
Note : WM2003 manual workaround
2. Create string key "Current Operator Name" and provide your operator name
3. Create dword key "Signal Strength Raw" and give decimal value "100"
This will show the operator name you provided and signal strenght always 100%
This software is very old now. There are lots of other options currently available that provides a better "iPhone" look. Check these forums, they're two of the best:
http://lakeridgesoftware.com/forum/showthread.php?t=11402
http://forum.xda-developers.com/showthread.php?t=302739
iabaligod said:
This software is very old now. There are lots of other options currently available that provides a better "iPhone" look. Check these forums, they're two of the best:
http://lakeridgesoftware.com/forum/showthread.php?t=11402
http://forum.xda-developers.com/showthread.php?t=302739
Click to expand...
Click to collapse
That's for WM5/6 This is for WM2k3
Nope, both works for WM2003SE. I should know coz I got a Jam.
Grumps prog is self sustained. iTask needs additional progs like Mortscript and flash, but the transition animation are very impressive.
I'm also using Wisbar Advance Desktop now. Check my skin contribution here:
http://www.lakeridgesoftware.com/forum/showthread.php?t=11728
very good
thank you Re's launcher, its quite impressive work. i've installed the Fix version and i dont have to switch to the windows again to see what time is it now. by the way, i've customized the execution button, is it ok?
thank you, good work.
How to change the launcher to work for screen size 240x240
hi guys, I would like to use Re's launcher and slider on my Hw6510 but the screen size is 240x240. so you see the problem. is it possible to fix the launcher and slider so I can see everything on the screen? thank you.
Files include the default WM6 alarm wavs, the original ringers including oldphone, Schap's purple theme (thanks!), the "no sounds" wavs to stop those menu clicks, Smartskey copied to \Program Files (but not activated), startclean to \Startup to remove program history and the green welcomhead.95 splash screen.
Reg tweaks include..
Notifications - removed "Connection Established" and set "Incoming Mail" to Alarm3
Sounds - disable annoying beeps when changing call volume or dropped calls
Inbox - disabled account selector, empty deleted items set to manual, return to inbox when deleting.
Pocket IE - temp files, history and cookies stored on storage card, Cleartype and search set to google.
Sleuth's google tweak for Windows Live Search
Screen size set to Largest, ClearType enabled including Landscape.
TimeZones tab displayed and enabled.
Battery removed from Today screen and replaced with clock and clock displayed on all screens.
Backlight changed from 30 seconds to 1 minute
Also, glyphcache is set at 32768, file system cache untouched, IR Beam turned off.
Cingular keyboard settings
This isn't for everyone, just wanted to share!
(Thanks to those that update the WIKI, parts came from my Blue Angel and Wizard daze )
edited 10-30-2007 DP_WM6 with Vibrate is a slightly modified WM6 cab with AT&T Splash removed, Security Policies modified for unsigned cabs and RAPI access (Mobile Registry Editor won't give a "access denied", HSDPA icon (when available) and also, with Schaps' permision, his neat looking com manager vibrate file. Schaps Vibrate is renamed to allow installing this into a ROM that already has Vibrate. Delete either my Schaps_TrayIcon_MannerMode or TrayIcon_MannerMode from \Windows\Startup. BTIcon, latest XMMobiResetter and Landscape Cleartype are included. This is the same cab as the DP_WM6 with Vibrate & Batteryguage without the RandomAccess and Batterguage.
edited 10-16-2007 DP_WM6 with Vibrate
Added new cab with clean 3G Icon, latest xmmobitvresetter in \Windows\Startup. Also made the BTIcon a shortcut per Kyphur's suggestion. Also, Schaps Vibrate is renamed to allow installing this into a ROM that already has Vibrate. Delete either my Schaps_TrayIcon_MannerMode or TrayIcon_MannerMode from \Windows\Startup.
Also included is a barebones registry and clean 3G cab, no files except for the clean 3g file.
edited 10-31-2007 DP_WM6 with Vibrate & Batteryguage
Removed the themes and Samsung Clock. Added TWEAKCL.EXE to \Windows\Startup for Landscape Cleartype. Also added ClearType Tuner to the Control Panel and the RandomAccess Grey files, also BTIcon, latest XMMobiResetter and the Alarrm 1-5 files.
Excellent Doctor Putt..! Thanks.. A few things in there I can prolly use without searching for each individual thing..
Now if I could find the setting to disable IR Beam....
Dr Puttingham said:
Now if I could find the setting to disable IR Beam....
Click to expand...
Click to collapse
I don't remember who made it, but someone made a great comm manager that had the option to disable IR beam...find that and you might be in biznaz!
You don't mean the
HKLM\Software\Microsoft\Obex\IsEnabled key?
Or does this do more than just the IR beam?
crazyC said:
You don't mean the
HKLM\Software\Microsoft\Obex\IsEnabled key?
Or does this do more than just the IR beam?
Click to expand...
Click to collapse
Sweet, that was the key I was searching for.
Thanks!
glad to be a help.
I used sktracker when finding this and also when doing my own setup cab. great bit of software.
@crazyC
Thanks bro, a proggy I've been looking for.
These reg settings were found in 4 different wiki's here... I'll document each key later this week.
What is the 650k ATT file in the cab?
tnx
Dr Puttingham said:
Cingular keyboard settings
Click to expand...
Click to collapse
Just want to make sure this is the only reg entry needed for Cing Kybd
[HKEY_LOCAL_MACHINE\Software\OEM\Qwerty]
"Layout"=dword:00040409
EDIT:
You need this too:
[HKEY_LOCAL_MACHINE\ControlPanel\Phone]
"ShortStringExclusionList"=hex(7):2a,30,00,2a,31,00,2a,32,00,2a,33,00,2a,34,00,2a,35,00,2a,36,00,2a,37,00,2a,38,00,2a,39,00,23,30,00,23,31,00,23,32,00,23,33,00,23,34,00,23,35,00,23,36,00,23,37,00,23,38,00,23,39,00,00
@wpbear - yes.
@ScottC - that's a Today Theme (the *.tsk gives it away)
wpbear said:
Just want to make sure this is the only reg entry needed for Cing Kybd
[HKEY_LOCAL_MACHINE\Software\OEM\Qwerty]
"Layout"=dword:00040409
EDIT:
You need this too:
[HKEY_LOCAL_MACHINE\ControlPanel\Phone]
"ShortStringExclusionList"=hex(7):2a,30,00,2a,31,00,2a,32,00,2a,33,00,2a,34,00,2a,35,00,2a,36,00,2a,37,00,2a,38,00,2a,39,00,23,30,00,23,31,00,23,32,00,23,33,00,23,34,00,23,35,00,23,36,00,23,37,00,23,38,00,23,39,00,00
Click to expand...
Click to collapse
I won't argue with you but so far my KB has worked fine... from http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
Different keyboard layouts for different Hermes versions
Issue: When applying a non-cingular ROM to an 8525 its default keyboard is different than the 8525.
The Fix:
[HKLM\SOFTWARE\OEM\Qwerty said:
"Layout"=263177 (decimal)
Click to expand...
Click to collapse
Dr Puttingham said:
@wpbear - yes.
Click to expand...
Click to collapse
You dont have the shortstring stuff in your cab though. But the cingular cabs do.
See the CAB and/or the XML here.
I wonder what the shortstring stuff does??
wpbear said:
You dont have the shortstring stuff in your cab though. But the cingular cabs do.
Click to expand...
Click to collapse
I use ShogunMark's Cing cab and I've still had to do this reg tweak. No big deal, PM me at you convenience, like to include your cing stuff here if possible to make one entire cab for us Cing folks.
GREAT CAB Dr Petter... Thanks for sharing with us poor Nyc folk!
Dr Puttingham said:
@ScottC - that's a Today Theme (the *.tsk gives it away)
Click to expand...
Click to collapse
.
Sorry about that, I opened it in WinRar and only saw the file with extension .24...
Installing it now, thanks a million for this, it'll stay on my SD and should save me another 30 minutes next time I do a HR..
i left the keyboard settings out of my cab since i own the tytn and not the 8525 im selfish like that sometimes
and i was just picking through your cab... man you really went the distance on this one.. Looks good Dr. P... keep up the good work!
shogunmark said:
i left the keyboard settings out of my cab since i own the tytn and not the 8525 im selfish like that sometimes
and i was just picking through your cab... man you really went the distance on this one.. Looks good Dr. P... keep up the good work!
Click to expand...
Click to collapse
Thanks! This was from you, me, Jose, Molski, Risidoro and others from the Wizard Rat Pack, eheheh!
I would really like to include your Cingular settings but my WinCE Cab Mangler only shows phcanOverbmp.dll and nothing else... I think you used a xml file that I just can't see with WCM ???
And if Scnaps OK's me using his nicer vibrate exe from his ROM I'll be set... this does indeed cut a considerable amount of time from my frequent flashes, many times on the side of I95 when I get a ...hmmmm... iffy ROM ......
Dr Puttingham said:
Thanks! This was from you, me, Jose, Molski, Risidoro and others from the Wizard Rat Pack, eheheh!
I would really like to include your Cingular settings but my WinCE Cab Mangler only shows phcanOverbmp.dll and nothing else... I think you used a xml file that I just can't see with WCM ???
And if Scnaps OK's me using his nicer vibrate exe from his ROM I'll be set... this does indeed cut a considerable amount of time from my frequent flashes, many times on the side of I95 when I get a ...hmmmm... iffy ROM ......
Click to expand...
Click to collapse
yes sir you are correct, i did it all with xml.. if you open my cab with wince and click on the pre and post xml under the provisioning category you will see the xml code i hacked up all the different xml files for settings and made 2 seperate ones.. if you decide to do a similar thing, make sure you leave out the first and last lines "<WAP-PROVISIONING DOC>" .... Wince does not like these...
My findings for settings
Nice job !
In between multiple flahes of various roms I found a big relief in skipping the first windows dialogs with date, mail, touch calibration etc. by adding a blank file "welcome.not" in the root of the storage card and add the touch settings [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH\CalibrationData] in my own settings cab.
It works very well for me, so I thought I'd share it.
cheers,
dan
I could easily give some money if someone could make a program for making the bottom menu bar to hide and pressing like the big round bottom on phone would make it visible again. It would give alot more screen space for alot of programs, like writing sms etc.
It would be really great, I bet alot of people would like it to and also pay for it!
thanks
BarateaU said:
I could easily give some money if someone could make a program for making the bottom menu bar to hide and pressing like the big round bottom on phone would make it visible again. It would give alot more screen space for alot of programs, like writing sms etc.
It would be really great, I bet alot of people would like it to and also pay for it!
thanks
Click to expand...
Click to collapse
Here you are This is in polish, but program do exactly what you want - hide bottom bar in wm5, you can translate in google:
http://www.pdaclub.pl/index.php?option=com_files&Itemid=54&cid=38&fid=691&srv=2
And this is a file
TomekJ said:
Here you are This is in polish, but program do exactly what you want - hide bottom bar in wm5, you can translate in google:
http://www.pdaclub.pl/index.php?option=com_files&Itemid=54&cid=38&fid=691&srv=2
And this is a file
Click to expand...
Click to collapse
thanks, but i want it for wm 6.1q diamons default os, andbtouch flo
Is it only me that thinks its a good idea?
no your not alone
i found this topic because i had the same idea
ghostdweller said:
no your not alone
i found this topic because i had the same idea
Click to expand...
Click to collapse
Great
It would be really good removing it, having more screen space like opera when browsing it goes to fullscreen and pressing on the screen will make the bar's and menues apear again. Something like that would be great for the rest of the phone!
Ok ill give 200sek for the one that fixes this mod!
hiding top and bottom menus! And makes them appear when wanted!
Questions? ask!
you can do that with vjtoggletoday (www.vijay555.com) and a tool for setting registry keys (the guy who has written batterystatus has also written such a tool).
create a lnk file with the desired settings and map it to a key. that should do it. but you only have one key available to map (long end key)
I've seen that toggletoday thingy but i think its for wm5. I've tried installing it but nothing happend.
Thanks thou!
hi guys, I wanted to just remove the bottom bar like u guys and found this software from some site. Dont know where actually.. But it works on my Diamond.
It just removes the bottom bar.
Hope this helps.
lordaris said:
hi guys, I wanted to just remove the bottom bar like u guys and found this software from some site. Dont know where actually.. But it works on my Diamond.
It just removes the bottom bar.
Hope this helps.
Click to expand...
Click to collapse
Nothing happend with that cab. I did a soft reset but didnt help!
thanks anyway
same here
doesn't work with my touchflo
also tried a softreset
tried to install it with touchflo disabled
and when i enabled it ..... nothing
(also tried the softreset afterwards)
any sugestions ?
reg references ?
(maybe's there's is a way to just remove the black bar (as was done with the curtain remover) and leave the buttons intact ?
(that would be the next best thing for me)
I'd rather hide the menues completly. It would be really nice having a full screen phone. Now it looks more like a pda
BarateaU said:
I've seen that toggletoday thingy but i think its for wm5. I've tried installing it but nothing happend.
Thanks thou!
Click to expand...
Click to collapse
vjtoggletoday works also on wm6. make sure it is the alpha2 version.
you can use the attached zip file. put the autorun lnk file into your windows startup folder and configure this utility before soft-reset.
advantage of vjtoggletoday is, you can define how much of the bars' height should disappear.
another app is dcinobar which hides the bottom bar only
egoist6 said:
vjtoggletoday works also on wm6. make sure it is the alpha2 version.
you can use the attached zip file. put the autorun lnk file into your windows startup folder and configure this utility before soft-reset.
advantage of vjtoggletoday is, you can define how much of the bars' height should disappear.
another app is dcinobar which hides the buttom bar only
Click to expand...
Click to collapse
I dont know what that apps did to my diamond. Im not setting that on autorun! And the config file how are you suppose to config it? When neither of them starts?
by the way: both apps (i have attached dcinobar to my post above) only hide the bars on the today screen only. the bars do not disappear if you run an app.
if this would help you to some extend, i'll give you a step-by-step instruction for vjtoggle.
dcinobar is easier. just run the tool.
Have you tried them on a diamond? Cause the dcinobar did nothing on my diamond.
And the other program i think i will need a step by step guide
Thanks mate!
BarateaU said:
Have you tried them on a diamond? Cause the dcinobar did nothing on my diamond.
And the other program i think i will need a step by step guide
Thanks mate!
Click to expand...
Click to collapse
dcinobar works definitely on diamond. i am currently using it myself.
as said. both programs only hide the bar on today screen.
dcinobar: just copy the exe file to \windows\startup\. softreset. that's it.
vjtoggle:
copy the vjtoggletodayiialpha.exe to \Program Files\vijay555\
(if you keep the directoryname, you do not need to adjust the lnk files)
copy the vjtoggletodayAutorun.lnk to \Windows\StartUp\
copy the VJ Toggle Config.lnk to \Windows\StartMenu\Programs\
now run the config tool and set the values to 0. the config tool only sets the registry keys which are being used by the file in the startup folder.
alternatively you could do the settings yourself:
Code:
[HKEY_LOCAL_MACHINE\Software\Vijay555\VJTodayToggle]
"Enabled"=dword:00000001
"SoftKeySize"=dword:00000001
"StartSize"=dword:00000001
"TrayVisible"=dword:00000001
in this case the top and the bottom bar will have the size of 1px (just in case you still want to access them )
soft-reset.
if you do a soft-reset i would recommend to switch the phone off (long press on the button on the very top of your diamond).
if this is not working, you are definitely doing s.th. wrong as it works on my diamond.
post here if you need some more help.
vjtoggle:
copy the vjtoggletodayiialpha.exe to \Program Files\vijay555\
(if you keep the directoryname, you do not need to adjust the lnk files)
copy the vjtoggletodayAutorun.lnk to \Windows\StartUp\
copy the VJ Toggle Config.lnk to \Windows\StartMenu\Programs\
now run the config tool and set the values to 0. the config tool only sets the registry keys which are being used by the file in the startup folder.
alternatively you could do the settings yourself:
Click to expand...
Click to collapse
I did that, step by step. When i rebooted the htc, i didnt get a top menu at all and not just in today in all windows. And the bottom menu was still there.
And what happends if this will work. Will i get 2 black bars instead of 2 menues or will the screen auto adjust?
BarateaU said:
I did that, step by step. When i rebooted the htc, i didnt get a top menu at all ...
Click to expand...
Click to collapse
isn't that what you wanted to achieve (see post #7)
BarateaU said:
... And the bottom menu was still there...
Click to expand...
Click to collapse
please check the registry settings, if the key softkeysize = 0
also try to set trayvisible = 0
BarateaU said:
...And what happends if this will work. Will i get 2 black bars instead of 2 menues or will the screen auto adjust?
Click to expand...
Click to collapse
the space available for today screen will increase. the today screen is not stretched by the size you gained, you 'll have more space available.
did you try dcinobar?
Run the CAB file and soft reset of your device.
Having this skin, you can choose type and quantity of active functions. You can edit the register or use Schaps Advanced Configration Tool v 3.x to do it.
This solution don't replace the existing CommManager. You can use both. Use the Advavanced Config to choose between skins:
On/Off Button - for standard Diamond skin
Large Button - for Kaiser or DiamondStyle skins.
Buttons names will be displayed in your language.
In Dimond Style skin you can use 7 to 10 buttons (from 12).
WARNING! When you use 10 buttons, place the Sound/Vibrate button in last line for better performance.
In Kaiser skin - 10 buttons (from 12).
Kaiser CommManager Landscape AddOn: http://forum.xda-developers.com/showpost.php?p=2763010&postcount=28
Standard Diamond CommManager missing icons AddOn: http://forum.xda-developers.com/showpost.php?p=2767574&postcount=29
Many thanks Balu888 and Nemos (4pda.ru) for drawings updated.
Thanks! I never quite liked having to compromise some options and decide which 6 to include in the original Comm Manager.
Now I can have them all!!!!
Many thanks
Thanks. Nice to see all the communication options all at once rather than a limit.
Now all we need is for one of our skinning masters to come up with a more diamond looking interface and this will be really cool.
EDIT: Just noticed there is no option to turn off 3G!
Can this be made a tab in TF3D?
I renewed the graphic files (Look in the preview), but i´m not able, to make a cab out of these files. I don´t have the knowledge in this way. If someone want´s to make this job, i post here the changed graphics. But at 1st it would be good, to get a feedback.
To integrate it in TF3D, you can use the Softkey Changer. With this program you can replace one tab of the homescreen from Programs or else to Comm Manager.
Is it possible to make a 3G button. I use it a lot to save battery.
New idea
Here I have tried to make skin in Diamond CommMamager style .
Having this skin , you can choose type and quantity of active functions from 7 to 10 (12 accessible). You can edit the register or use Schaps Advanced Configration Tool v 3.2 to do it. Now you don't need to change buttons pictures as in Kaiser CommManager.
BUT I haven't standard icons for buttons InternetSharing and VOIP to finish this work.
Send me, pls... who has...
I´ve got it to run...with some tricks. But i don´t like, that this module don´t recognize, that there are masked .png-files. So all, what should be invisible, is now white. But the functions are okay. It integrates itself into the Comm Manager in the Connection-Tab. But not in the new seperate Comm Manager tab, that´s a problem.
Also there are little graphic errors, which are not in the original graphics.
http://imageshack.us
vadim_bogaiskov said:
Here I have tried to make skin in Diamond CommMamager style .
Having this skin , you can choose type and quantity of active functions from 7 to 10 (12 accessible). You can edit the register or use Schaps Advanced Configration Tool v 3.2 to do it. Now you don't need to change buttons pictures as in Kaiser CommManager.
BUT I haven't standard icons for buttons InternetSharing and VOIP to finish this work.
Send me, pls... who has...
Click to expand...
Click to collapse
Really like the concept here. Might need some work on cleaning up the images and maybe adding a little depth. Great work though.
Ive tryed it now. I cant delete it at all. When i try to delete it, and when i try to open the comm manager again, ill get a black screen, with white text from kaisers comm manager
H3IN3K3N said:
Ive tryed it now. I cant delete it at all. When i try to delete it, and when i try to open the comm manager again, ill get a black screen, with white text from kaisers comm manager
Click to expand...
Click to collapse
Check the registry keys, for Diamond standard must be:
[HKLM\SOFTWARE\HTC\CommManager]
SupportedFunctions=6
DisableButtonText=3
For Kaiser:
SupportedFunctions=10
DisableButtonText=2
And soft-reset, of course...
Or use Advanced Config \CommManager: choose your 6 function and On/Off Buttons.
i tried more commanager and now i have nothing !!!
somebody can put here the original htc diamond commanager (vga) ?
thank
sorry : i find the solution with advanceconfig
athome93 said:
i tried more commanager and now i have nothing !!! somebody can put here the original htc diamond commanager (vga) ? thank
sorry : i find the solution with advanceconfig
Click to expand...
Click to collapse
You mean found the solution to delete it and install the original Comm Manager, or found the solution to make it work ? If the answer is the second one, please share it with us !!!!!
This is very nice thank you.
will this replace the existing comms manager? I'd like to have both on my device and remove the new one without problems if I decide.
ktsak said:
You mean found the solution to delete it and install the original Comm Manager, or found the solution to make it work ? If the answer is the second one, please share it with us !!!!!
Click to expand...
Click to collapse
I found the solution to put the original commanager, all commanager have installed work very good and configurable with advenced-config
topspeclt said:
will this replace the existing comms manager? I'd like to have both on my device and remove the new one without problems if I decide.
Click to expand...
Click to collapse
No, this solution don't replace the existing CommManager. You can use both. Use the Advavanced Config to choose between skins:
On/Off Button - for standard Diamond skin
Large Button - for Kaiser and DiamondStyle skins
in future I want make default skin available in Diamond too.
Diamond Style Comm Manager 10 Button
Drawings are updated - many thanks Nemos (4pda.ru), missing icons are added. But without album orientation.
You can use 7 to 10 buttons (from 12).
WARNING! When you use 10 buttons, place the Sound/Vibrate button in last line for better performance.
Looks great... just two question :
- only for russian ?
- is it possible to uninstall it and go back to default settings ?
But it would be nice to have more than 6 items on the diamond !
Ciao
Fred
Hi,
I realize that this question was asked a million times on the forum, but I've been looking for a solution since yesterday and just can't find it
Can anyone tell me how can I change the default touch input language (T9) on Windows Mobile 6.5? I'm using the Rhodium Manila with the new Keyboard and I have by default english language (I'd like to have polish).
I cannot change this in any way. I've tried to do it by registry in several keys, but it won't work.
Thanks in advance for the help!
Hey,
for me this worked:
http://forum.xda-developers.com/showpost.php?p=3865875&postcount=362
else you can change HKLM\Software\HTC\ezsip\BioToShowMenu to 1 (in registry) and wait for few seconds.. (not more than 10sec) that "starts" the sip-menu, and you can click on your language
maybe it says [unknown] in the menu, then click there, that brings you to the language submenu
hope that helps you
Kamill said:
Hi,
I realize that this question was asked a million times on the forum, but I've been looking for a solution since yesterday and just can't find it
Can anyone tell me how can I change the default touch input language (T9) on Windows Mobile 6.5? I'm using the Rhodium Manila with the new Keyboard and I have by default english language (I'd like to have polish).
I cannot change this in any way. I've tried to do it by registry in several keys, but it won't work.
Thanks in advance for the help!
Click to expand...
Click to collapse
Great! It helped, thanks a lot
Sorry for the double post, just wanted everyone to notice it
I've made a cab, which changes the registry value (thanks to tomoffel), so that you have easy access to the SIP Menu. I tried to do it as a reg file, but it would require some additional program to run it.
Just install it (don't mind if it shows 'The installation was unsuccesful') and voila
The cab is rather only for WM6.5, where the SIP menu is hidden.
great idea! Thank you!
just poping up the SIPmenu after "installation"?
btw. found the BioToShowMenu entry by playing around in the registry, don't know if this was known befor maybe that helps to fix the SIP menu in 6.5?
Yeah, exactly I thought that changing the reg value everytime I want to change the language or keyboard type is a but uncomfortable. It's a pity though that running reg files requires some additional software, because it would be faster.
That's some nice discovery of you with that reg value I'm not that so much in WM, but I hope this can help!
Ok, here's the other way. You have to install an app (FdcSoft Task Manager), it will associate reg files, so that after clicking one the reg value will be changed.
Here's the reg file content:
Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ezsip\]
"BioToShowMenu"=dword:00000001
The last line must be empty!
Credits for finding the reg key go to tomoffel
And here's the ready file in the attachment.
great and awesome! works like a charm
Kamill said:
Ok, here's the other way. You have to install an app (FdcSoft Task Manager), it will associate reg files, so that after clicking one the reg value will be changed.
Here's the reg file content:
Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ezsip\]
"BioToShowMenu"=dword:00000001
The last line must be empty!
Credits for finding the reg key go to tomoffel
And here's the ready file in the attachment.
Click to expand...
Click to collapse
Good to know Here's another upgrade to access the menu faster - just do a shorcut and put it into start or assign a hardkey for it
I assigned the shortcut to GScrolls Launch function now wenn I tap back and center, the SIP-Menu comes up! Thank you again
now you/we/the uber pros just have to find a way how the "SIP-Button" shows that menu.. but it looks like nobody is interesstet :/
Offtopic:
can you add new words to the xt9 database? This never worked for me :/ neither after hardrest nor after installing another sip that uses the xt9 :/ (just ask because I see you use the same ROM )
That's a good idea with assigning the menu to GScroll, will try it myself
I noticed already yesterday that adding new words to t9 doesn't work It could be an issue with the rom we are using. Would be nice to have some feedback from anyone with a different rom...
yes.. pretty poor nobody on the ROM thread could give me an answer :/ I will play a little with the registry and file from ezSIP maybe I'll find another "solution"