Phone not vibrating when on vibrate! - Palm Treo Pro

I have noticed that for some reason when I put the switch into vibrate mode my phone no longer vibrates when I receive a call. I have tried modifying pretty much every setting there is to modify and its really odd because my phone will vibrate to let me know when I have missed the call but not when the call is actually happening.
Now I am certainly not a novice in the ways of windows mobile phones (this is phone number 40 and WinMo number 21) but I have no idea what is wrong. Is anyone else experiencing this glitch or am I all alone?

fungflex said:
I have noticed that for some reason when I put the switch into vibrate mode my phone no longer vibrates when I receive a call. I have tried modifying pretty much every setting there is to modify and its really odd because my phone will vibrate to let me know when I have missed the call but not when the call is actually happening.
Now I am certainly not a novice in the ways of windows mobile phones (this is phone number 40 and WinMo number 21) but I have no idea what is wrong. Is anyone else experiencing this glitch or am I all alone?
Click to expand...
Click to collapse
Working perfect for me.
Have you tried doing a Hard Rest (after backing up using the included Sprite backup software)???
If you have tried all settings, resting to factory would be my next step.
Good Luck.

In all my various installing and uninstalling believe I have done about 4-5 hard resets and backups with sprite. Its a no go.

fungflex said:
In all my various installing and uninstalling believe I have done about 4-5 hard resets and backups with sprite. Its a no go.
Click to expand...
Click to collapse
If this is the case you may have a broken device. Does it vibrate AT ALL? I would REALLY start with a hard reset (don't restore a backup) and see if that fixes it.

i had the same issue
read here:
http://forum.xda-developers.com/showpost.php?p=2821614&postcount=154
to sum it up:
a hard reset(with the sim card inserted where the palm customization scripts ran through and the treo was soft reset in that proces twice) fixed it for me

Related

I have a strange issue with my Vario II !

When I re-set my phone, I get one of the alarms going off, and the vibrate alert.
This happens about 4 or 5 times in succession for no apparent reason when Windows loads.
It then happens intermittently, but not as often, for about 5 minutes – again sounding and vibrating.
I do not have this alarm sound set up for any action in the sounds settings. It doesn’t matter if I have an appointment or not. I do not have an alarm set-up.
One additional point (which indicates a software fault) is that I had my phone replaced for SA issues and I did a full backup before I changed the phone (this problem also happened on my old phone). After a full restore, the problem was copied to my new phone.
Does anyone know / or has anyone had this issue and resolved it?
Thanks all.
ratzz
Anyone any ideas on this (other than a hard reset)? It's driving me CRAZY!!
since youre still using the old restore... youre just moving the problem...
You can try to uninstall your apps one by one...
But it's faster to hard reset and re-install it one by one..
You could try installing alarmtoday by pocket max, this will list each alarm/notification/every sounding event on your system, you can then see what's causing this and hopefully cancel it.
if you find out, let us know. Good Luck
Thanks guys -- I figured that my worsed case scenario my be my only option.
Ratzz
Just a thought but if you go into Sounds and Notifications do you have 'vibrate' set for Activesync?

X1 auto restart if SMS unread...

Hi guys,
not sure if any one of you have this problem? My set will auto reboot if my incoming sms is not read and when the vibrate in new incoming sms is set.
Did a full hard reset to reload rom, still there. Tested on a newly reload rom, still suck big time. But i do enjoy hard resetting and loading diffferent boot-loader to the phone.
Enjoyed this phone except for this crazy issue.
Going to get SE to replace the set. Hope it goes away.
bigwhizkid3 said:
Hi guys,
not sure if any one of you have this problem? My set will auto reboot if my incoming sms is not read and when the vibrate in new incoming sms is set.
Did a full hard reset to reload rom, still there. Tested on a newly reload rom, still suck big time. But i do enjoy hard resetting and loading diffferent boot-loader to the phone.
Enjoyed this phone except for this crazy issue.
Going to get SE to replace the set. Hope it goes away.
Click to expand...
Click to collapse
well if this really is an issue, I doubt replacing the phone will help because it is most likely a bug in the firmware rather than the hardware itself..
why don't you try to fix the battery more firmly, so that the contacts to be made better. it may be the poor contact with the batter, so when your phone vibrates it restarts.
there's no way to be a soft error.
Got the new phone today. the issue so far is not happening.
The phone will vibrate then after awhile like 3-5 minutes then restart, or some time black out. When it balck out, you can heard a beep when you try the power button, then i will go dead till you take out the battery and restart.
The new phone definately feels much faster then the old one, even with all the same contacts and programs installed. So i believe it was a hardware problem. So far i did not see anyone with the same problem so i think it is a one off thing.

Phone doesn't ring - all other sound good

Last night my ATT8525 phone, which I've had for several years, suddenly stopped playing the ringtone for incoming calls. All other sounds have been tested and working, including playing music. I've tried changing the volume of both the device slider and ring slider to vibrate, then to off, then back on. All levels of volume on both sliders.
Another strange problem is if I go into settings to Sounds & Notifications, if I click OK on any setting it goes to the Incoming Call setting. It doesn't close the screen out anymore. I can click OK, turn off the sounds, set it to something different, clicking OK no longer accepts the setting. If I go to another setting other than for Phone: Incoming Call, then clicking OK brings me back to that option.
I've done a soft and hard reset. Any ideas?
Thisstrange indeed. The rear speaker is used for the phone ring and clearly this is ok because you can play music (I am assuming you were not using headphones to test the music).
Before you said you had done a hard reset, I would have sworn that would cure the problem. This may seem cheeky but I assume you really have done a hard reset (some folks think they have but haven't really). Can we assume you used the two soft keys plus the stylus in the hole method?
If so it may be worth trying another couple of times.
Temporarily at least, if that fails, it may be worth trying to flash a different ROM. However, before that, perhaps you should wait to see if anyone else has some words of wisdom.
Mike
Thanks for the response. You are correct, I wasn't actually doing a hard reset. If I do a hard reset, I assume I lose all my settings and go back to the fresh ROM state?
chi11ipepper said:
Thanks for the response. You are correct, I wasn't actually doing a hard reset. If I do a hard reset, I assume I lose all my settings and go back to the fresh ROM state?
Click to expand...
Click to collapse
Yes you lose all data that you have saved to the phone, including all installed applications. Data on the storage card remains ok. However, even if you installed an app to the storage card, you may still have to reinstall it.. Some might say you should do a full backup of the full system with the likes of SPB full backup, BUT if you were to restore the ful back-up after a hard reset, you would probably just put back the fault you are trying to resolve!
Mike
I can't really find a good suggestion but to Flash the ROM. But as mikechannon said, rule # 1 is to make a backup. Maybe you can use PIM Backup, so that only the contact and others are only the ones backed up. Your problem may reoccur for full system backup, as mentioned above.
Thanks
Just following up that the hard reset did fix the problem with the phone not ringing on incoming call. Also thanks for the PIM backup suggestion. This saved me a lot of time.
No problem.. Just here to help.. Peace..
same same
mikechannon said:
Yes you lose all data that you have saved to the phone, including all installed applications. Data on the storage card remains ok. However, even if you installed an app to the storage card, you may still have to reinstall it.. Some might say you should do a full backup of the full system with the likes of SPB full backup, BUT if you were to restore the ful back-up after a hard reset, you would probably just put back the fault you are trying to resolve!
Mike
Click to expand...
Click to collapse
I have the same problem and I tried Hard Resetting-no sound except with headphones. I started on friday with it not ringing when I had a call but now there is no sound at all. Any suggestions anyone????

Phone Lock Code CHANGES after Soft reset?

This is confusing!
I just carried out a soft reset on my device, carried out the same way I always soft reset my device. But after tapping in my lock code, keep getting message stating the code is incorrect.
This has baffled me, as I haven't even installed any new Apps, or carried out any new tweaks. It's as if the PHONE has changed the lock code after doing A SOFT RESET!
This happened to anyone else?
usually associated with installing swype 3.9 on a non tmous phone, although i also half remember similar behavour with exchange (not sure of this bit though)
oh, did you change the lockscreen in cookies? it gives a warning about not using passwords when messing with cookies lockscreen settings.
I haven't even installed any new Apps, or carried out any new tweaks.
Click to expand...
Click to collapse
i mentioned this above...
I may be wrong, but I clearly remember that soon after the discussion in here became lively since more people started to own the device, this problem has been reported several times even on pristine phones, where the phone would not simply change the code, but forget it altogether :-/
That's why I've never enabled it even if it would be a useful feature.
ephestione said:
I may be wrong, but I clearly remember that soon after the discussion in here became lively since more people started to own the device, this problem has been reported several times even on pristine phones, where the phone would not simply change the code, but forget it altogether :-/
That's why I've never enabled it even if it would be a useful feature.
Click to expand...
Click to collapse
I never forget my code, as I use the same code as I always have done. So im still baffled about this
this happened to me on my omnia like two years ago. just a little soft reset and i had to hard reset to be able to use my phone again. i had to get all my contacts and data back manually and this was the time i figured why are there so many backup programs for winmo.... didn't know anything about this OS before..
now i just use sim PIN, never had trouble..
Luckily I got SPB backup installed, and have it set to do automatic backup every monday morning @ 3am, but still wondering why the phone lock code.changed simply by doing a soft reset :-/
xtreme__boi said:
Luckily I got SPB backup installed, and have it set to do automatic backup every monday morning @ 3am, but still wondering why the phone lock code.changed simply by doing a soft reset :-/
Click to expand...
Click to collapse
I've had this happen a couple of times. The best I can come up with is something must write to the code's area whilst the phone is on. Like a buffer overflow... I had it happen on the stock ROM, and also on a custom ROM, but it hasn't happened recently... (I'm now on a recent 23xxx Energy ROM).

Phone froze/locked/permanently

Need Help ASAP!, I cant even slide to unlock when it first starts.
It has always been crashing, and i have disabled my emails, and hardly have any programs and still. After all the patches and updates no change!
tried soft reset, took the battery out 1000 times.
this has happened to me for the second time in 3 months.
I did a hard reset last time to fix the problem, but i have to much valuable info, new contacts, notes, sms etc....
Is there anything else i can do to fix this problem, without a hard reset!
I cant take this phone anymore, it is horrible!
unlikely that you can fix it without hard reseting in one form or another.
rather than worrying about fixing it, first look into backing up your stuff, and then start looking at the freezing problem.
TheOne1AndOnly said:
Need Help ASAP!, I cant even slide to unlock when it first starts.
It has always been crashing, and i have disabled my emails, and hardly have any programs and still. After all the patches and updates no change!
tried soft reset, took the battery out 1000 times.
this has happened to me for the second time in 3 months.
I did a hard reset last time to fix the problem, but i have to much valuable info, new contacts, notes, sms etc....
Is there anything else i can do to fix this problem, without a hard reset!
I cant take this phone anymore, it is horrible!
Click to expand...
Click to collapse
I think its the rom problem... next time you may choose a rom carefully... How to select a rom is a tough work... You could try to backup your files first...
Do the hardware buttons work?
My phone froze but it was a broken touch screen, fixed under warranty.
TheOne1AndOnly said:
Need Help ASAP!, I cant even slide to unlock when it first starts.
It has always been crashing, and i have disabled my emails, and hardly have any programs and still. After all the patches and updates no change!
tried soft reset, took the battery out 1000 times.
this has happened to me for the second time in 3 months.
I did a hard reset last time to fix the problem, but i have to much valuable info, new contacts, notes, sms etc....
Is there anything else i can do to fix this problem, without a hard reset!
I cant take this phone anymore, it is horrible!
Click to expand...
Click to collapse
I am sorry that you are having the problem.
But it is not the phone. That I can be sure.
If you have modified the phone in anyway, some where along the line, something has gone wrong.
I used to have to hard reset many times when i got my first Windows Mobile Phone ( 2nd Generation HTC Tilt ).
I then went to the HTC Pure, and now I have the HD2.
It is a learning curve when you start adding programs and tweaks.
It takes time, trial, and more time.
I can tell you that I had to hard reset the HD2 just once.
I have over 200 tweaks, registry changes, programs, etc. The phone works great.
I now have learned to back up the system and registry just in case.
And pick and choose programs carefully. Buy only the ones you need.
Dont give up on the phone. Good luck.
TheOne1AndOnly said:
Need Help ASAP!, I cant even slide to unlock when it first starts.
It has always been crashing, and i have disabled my emails, and hardly have any programs and still. After all the patches and updates no change!
tried soft reset, took the battery out 1000 times.
this has happened to me for the second time in 3 months.
I did a hard reset last time to fix the problem, but i have to much valuable info, new contacts, notes, sms etc....
Is there anything else i can do to fix this problem, without a hard reset!
I cant take this phone anymore, it is horrible!
Click to expand...
Click to collapse
Is the phone stock, or have you made modifications? When on and connected with usb to a pc, does active sync start on the pc? you may have to hard reboot: read: always make backups to the sd card (PIM backup, sktools, sprite backup, etc.) of critical data as soon as it hits your phone. If you are miserable with what you have on your phone, change it. I fell in love (from hate) with my HD2 when MIRI_DINIK V 17.0 WWE gave it a new soul. good luck.

Categories

Resources