Hi!
I use HTC P3400i, but I can't change my thimr at taday.
before I can change it, but now It will not be changed. Why?
I already flash my phone.
just put the .tsk files into the root of ya fone n go to today n set the themes ya want best of luck
You may put .tsk files in the root of your phone or SD card. Probably the theme files may have been placed in some directory and hence are not showing upin today screen.
nipun_cse said:
Hi!
I use HTC P3400i, but I can't change my thimr at taday.
before I can change it, but now It will not be changed. Why?
I already flash my phone.
Click to expand...
Click to collapse
The tsk files should be ideally put in \My Documents or \Windows folder.
Thanks to All,
I already solve that Problem
I guess you must have done a hard reset right? I haven't found any other solution for this problem till now. Please do share when you find solution to any problem so that others can benefit too, and our forum can be saved from "Wild Threads"
Sumit,
when i do this thread, I am a new user of Gene. this is my first PDA use. that time I doesn't know any thing.
after some days by the XDA forum I learn more and more...
Thanks to all member of this forum. They are really nice People and also helpful.
By the way, after purchase GENE, with in 1 month I flash my ROM, then the Theme problem occurred (Basically It is not Problem, Just copy Theme file into windows folder).
regards
Nipun
krazy_about_technology said:
I guess you must have done a hard reset right? I haven't found any other solution for this problem till now. Please do share when you find solution to any problem so that others can benefit too, and our forum can be saved from "Wild Threads"
Click to expand...
Click to collapse
Related
after installed it on my t-mobile mda n' passed several difficult trouble on radiostack, this os such a great thing that i expect to figure on my pda. but, later i realized that the os didn't fit my expectation when its began to erase my files on the sdcard 'misteriously'.
a thing that make me become so so bad, the size of files doesn't match with the used area on the card, what kind of trouble is this? they erased my files but the space didn't change..
is there any idea to get my files back before i'm goin' to format it?
how to avoid it in the future?
thx for read it..
The only way to avoid it is to write protect the memory card by moving the slider switch to lock position.
slider switch...
thank's for ur answer, it migth be useful, but can you point the position of the slider? whether it's.on the pda or on memory? l'm using visipro mmc 256mb, n' i don't see any slider on lt.
thx.
Re: slider switch...
cep said:
thank's for ur answer, it migth be useful, but can you point the position of the slider? whether it's.on the pda or on memory? l'm using visipro mmc 256mb, n' i don't see any slider on lt.
thx.
Click to expand...
Click to collapse
Only SDCard has a write protect slider, and U'r using MMC not SDCard.
I have a same problem before, my SDCard erased, it happened twice, and I run the SD_Fix registry file, since 2 months this problem never happen any more.
How do I run this file?
Thanks
I'm glad to find oud this thread, i've faced this problem since i upgaded my XDA to 4.01.16, i've lost all data in my MMC card as you had.
I downloaded the "SD_fix" files but how do i run it to solve the problem ?
Thanks!!!
How to Run SD_fix.reg
sonie_vespie said:
I'm glad to find oud this thread, i've faced this problem since i upgaded my XDA to 4.01.16, i've lost all data in my MMC card as you had.
I downloaded the "SD_fix" files but how do i run it to solve the problem ?
Thanks!!!
Click to expand...
Click to collapse
just copy the .reg file to your PPC and run it. CMIIW...
Re: How to Run SD_fix.reg
dharma said:
just copy the .reg file to your PPC and run it. CMIIW...
Click to expand...
Click to collapse
Yes, but how? I have it on my PPC and when I click it, it says: "There is no applicationassociated with SD_FIX (working)". Run the application first then open the file from within the application".
Re: How to Run SD_fix.reg
Deke Martin said:
dharma said:
just copy the .reg file to your PPC and run it. CMIIW...
Click to expand...
Click to collapse
Yes, but how? I have it on my PPC and when I click it, it says: "There is no applicationassociated with SD_FIX (working)". Run the application first then open the file from within the application".
Click to expand...
Click to collapse
Sorry, I forgot to advise you to install Registry Editor Program on your PPC first. (e.g. PHM Reg edit)
hi,
it's quite good, i alo thought that but i had installed "regeditce" prog so the file doesn't associate .
I'd installed the PHM as u mentioned above and ran the SD_fix but it didn't react (install or import..ect), it just opened the PHM program. Hence, i dont know whether it's imported to the registry or not now i'm waiting and hope the problem will be solved.
Thank you all
Unfortunately, it doesn't work well, after running that file, i installed two programs on storage card (HandMap and E-dictionary). Then I tried to soft reset and my MMc card was erased. oh, what can i do now ?
sonie_vespie said:
hi,
it's quite good, i alo thought that but i had installed "regeditce" prog so the file doesn't associate .
I'd installed the PHM as u mentioned above and ran the SD_fix but it didn't react (install or import..ect), it just opened the PHM program. Hence, i dont know whether it's imported to the registry or not now i'm waiting and hope the problem will be solved.
Thank you all
Click to expand...
Click to collapse
I don’t know exactly what the problem is, if another one who had the same prob and been solved please share how to solve this.
Sorry sonie_vespie I can’t help you better than I did.
Where is the SD_fix.reg file
Hi,
How can I get the SD_fix.reg file? Thanks
hi,
the file is above
I think that the .reg file is exported form a key in REGISTRY, but when i run it, it isn't imported to the defined key exactly so the card is still erased
Help me, thanks 'coz i like the 4.01.16 of T-Mobile
hi all,
Let use "Resco registry" to import SD_fix to Registry. It's okay now
sonie_vespie said:
hi all,
Let use "Resco registry" to import SD_fix to Registry. It's okay now
Click to expand...
Click to collapse
I glad to hear that, good luck than..
hi,
Many thanks for your help, darma
hope we have chance to share our xp
best regards,
Hi,
Can someone point me to a simple Extended ROM Unlock tutorial because I just can't manage to find my way through the Forum.
I'de like to place my favorite apps in ROM...
Thanx
The General
GeneralPatton said:
Hi,
Can someone point me to a simple Extended ROM Unlock tutorial because I just can't manage to find my way through the Forum.
I'de like to place my favorite apps in ROM...
Thanx
The General
Click to expand...
Click to collapse
well general, depends on the OS you are using..
if you have rom version 1.6.x.x it won't work easy yet.
the pre 1.6.x.x roms are quite simple, download totalcommander for ppc, install it, run it, in the adress-bar type "\extended_rom\" without the " " 's, and voila, there they are..
good luck..
ps.
the search button on top of this page would give the oppertunity to search for words as extended rom in de wizard forums.. :wink:
Ok
Thanx works fine with TC
Just a last question, all cabs i place in extended_rom will install automatically after hard reset ?
'cause I saw i had a autorun.exe file in there and some sutomization cabs that install after Hardreset ???
Thanks
The General
Re: Ok
GeneralPatton said:
Thanx works fine with TC
Just a last question, all cabs i place in extended_rom will install automatically after hard reset ?
'cause I saw i had a autorun.exe file in there and some sutomization cabs that install after Hardreset ???
Thanks
The General
Click to expand...
Click to collapse
There's a config file in there too (can't remember it's name off hand, but it's fairly obvious). This has a list of the cab files to install after a hard reset. I guess you'd need to add your cab files to that list as well as copying them to extended ROM.
Dox
Re: Ok
GeneralPatton said:
Thanx works fine with TC
Just a last question, all cabs i place in extended_rom will install automatically after hard reset ?
'cause I saw i had a autorun.exe file in there and some sutomization cabs that install after Hardreset ???
Thanks
The General
Click to expand...
Click to collapse
depends, some have a config.txt file, if you open this one and edit it to your
needs, the files you put into it will be installed after hard reset, if you
set the right parameters from the txt file.
other roms have the autorun.exe wich installs all the files in the extrom.
i'm not sure anymore if this is right, but i believe that if you rename your
cab's like this:
applicationX.cab -> Default_applicationX.cab
it will install without any problems.
if you have problems with unsigned cabs, you can use the signed.patch
wich can be found on the ftp.
On my Cingular 8125 the extended ROM is write protected, does anyone know how do I remove the write-protection?
jsnipper said:
On my Cingular 8125 the extended ROM is write protected, does anyone know how do I remove the write-protection?
Click to expand...
Click to collapse
Only way around is to flash an older rom into your handset..
Re: Ok
nmx77 said:
GeneralPatton said:
Thanx works fine with TC
Just a last question, all cabs i place in extended_rom will install automatically after hard reset ?
'cause I saw i had a autorun.exe file in there and some sutomization cabs that install after Hardreset ???
Thanks
The General
Click to expand...
Click to collapse
depends, some have a config.txt file, if you open this one and edit it to your
needs, the files you put into it will be installed after hard reset, if you
set the right parameters from the txt file.
other roms have the autorun.exe wich installs all the files in the extrom.
i'm not sure anymore if this is right, but i believe that if you rename your
cab's like this:
applicationX.cab -> Default_applicationX.cab
it will install without any problems.
if you have problems with unsigned cabs, you can use the signed.patch
wich can be found on the ftp.
Click to expand...
Click to collapse
Hi
Could tell us where on the ftp we can found signed.patch?
Bye
Herc. 8)
Here it is
i couldn't find it on the ftp anymore as well..
i'll put it there again, but here it is for you
if it's that easy to get into extended rom, then why do people release the unlockers for extrom? i don't get it.
Ray_jai said:
if it's that easy to get into extended rom, then why do people release the unlockers for extrom? i don't get it.
Click to expand...
Click to collapse
you can access the files on the extended rom, but you can't edit any of the information there. you have to flash a new extended rom image for any changes to take effect. I think those that are looking at the extended rom unlockers is for a different purpose. I think I read somewhere that it let some people use the extended rom space as extra storage (~10 megs), but it messed up applications on the phone, especially the camera.
in general, it doesn't seem to be a good idea to unlock the extended rom. most rom builders look like they are trying to learn how to edit this properly to add it o their rom kitchens.
can one's extended rom go curropt?
after i heard about this, i went into extended rom just to see if it works.
and it did. i exited total commander and started to gather my anti theif program to get installed.
now I go back into extended rom, and everything became gibberish!
and when i click on something it says "error 3 Changing to dir!"
WTF is going on!
can someone help me out?
Hi!
I bought an XDA Exec about a month ago, and I've already had a problem with it. I installed some 3rd party software which it didn't seem to approve of.
Anyway, to cut a long story short - the file camera.exe now appears to be missing. It's not on the O2 disks, and I can't find it anywhere. Can anyone help by sending it to me, please? You'll have my undying gratitude if you do. I might even stretch to buying you a beer.
One thing, though - I'm a complete beginner with this device, so please make any explanations of what to do as non-techie as possible.
Thanks in advance for any assistance you can offer.
Okay, I fixed camera.exe. 8)
Thing is, now camera.lnk seems to be corrupt too. Would anyone be kind enough to let me have a copy of that?
SQirl said:
Okay, I fixed camera.exe. 8)
Thing is, now camera.lnk seems to be corrupt too. Would anyone be kind enough to let me have a copy of that?
Click to expand...
Click to collapse
Try freeware Total Commander for PocketPC, this cool file manager can create a new fresh shorcuts.
Help me!!!
I got the same problem. Where did you find the camera.exe and camera.ink file.Could you please send me to [email protected]
camera.exe
Could you tell me how you fixed it?
and if i need to replace the file where can i get them from?
Pratik
You need to replace camera.exe - you can download it from here. Or at least, you could a couple of weeks ago.
http://www.yousendit.com/transfer.php?action=download&ufid=329C495F0E41A994
The thing is, if you try to add camera.exe to your XDA, it won't allow you to do that. You need to zip the file, then copy camera.zip to your XDA, unzip it on the XDA and then it works!
The problem is that the camera button won't work then, because camera.lnk is also corrupt. You need to create a new shortcut for the new camera.exe. I can't remember offhand how I did it, but I'll check it and get back to you.
Hi I am looking for an app to unlock my windows files on my phone. When I try to delete most files it says "unable to delete, may be in use" so is there a program to let me do this and is it the one posted called "Unlocker"? Thanks...TJ
TrekkerJmm said:
Hi I am looking for an app to unlock my windows files on my phone. When I try to delete most files it says "unable to delete, may be in use" so is there a program to let me do this and is it the one posted called "Unlocker"? Thanks...TJ
Click to expand...
Click to collapse
I encountered this problem once about 8 months ago. I had made a couple of posting on this forum somewhere. I can't remember what I did to revolve it but nobody else had similar problem then. I'd also try to find and see if I can locate my post.
Thanks I would appreciate it. I want to remove some files that are not necessary...TJ
Here it is. I hope this matches the problem that you were describing.
http://forum.xda-developers.com/showthread.php?t=309932
Thanks for the reply. I don't want to to a hard reset unless its necessary so I'll just wait for a program to come along. Thanks again...TJ
I use WLM 10.6.0053.1000 and somehow my emoticon screen going weird like in the screenshot... I reinstalled, redownloaded from live site but seems like the emoticon won't show up for unknown reason.
I tried to check if there is any missing files but all files are OK.
Registry check also OK.
I'm using WM6.1 official v1.77 i-Mate 9502.
Please help me how to restore those emoticons....
Anyone? No one know the solution?
Arghhhh.... No answer and no one can answer.... >,<
Seems like the files are missing. Where did you install it, on the device, flashdisk or storagecard? I'd browse for the files first and see if I could find them.
Btw, I think this post might get moved since it aint really a post that belongs in this forum
Umm, maybe but I don't know what files are required to display that emoticon.
Yesterday I reinstalled the WLM (downloaded from live site http://mobile.microsoft.com/live/en-us/mobile/default.mspx).
For installation, it didn't give any option, it's all automated and installed in the device (precisely in the Windows folder).
But FYI, I checked the installation using SKTools and Pocket Mechanic, the installation is OK..
No files missing and registry are intact. Maybe other files (the system files) are missing? or some registry keys are missing?
Thanks for your help... ^^
I'll be waiting for your info for restoring the emoticon... ^^
Yup, sorry for posting in the wrong subforum. Moderators,please help me to move this thread to correct subforum. Thanks.. ^^
Crescendo Xenomorph said:
Umm, maybe but I don't know what files are required to display that emoticon.
Yesterday I reinstalled the WLM (downloaded from live site http://mobile.microsoft.com/live/en-us/mobile/default.mspx).
For installation, it didn't give any option, it's all automated and installed in the device (precisely in the Windows folder).
But FYI, I checked the installation using SKTools and Pocket Mechanic, the installation is OK..
No files missing and registry are intact. Maybe other files (the system files) are missing? or some registry keys are missing?
Thanks for your help... ^^
I'll be waiting for your info for restoring the emoticon... ^^
Yup, sorry for posting in the wrong subforum. Moderators,please help me to move this thread to correct subforum. Thanks.. ^^
Click to expand...
Click to collapse
try this one
dannyedilber said:
try this one
Click to expand...
Click to collapse
Tried just now but still same... only version in about page is different... T,T
Thanks for helping...
Seems strange... I checked all the system files in Windows folder, none missing/replaced by files with same name...
Maybe the registry?
Waiting...
And here we go... No one knows about this problem...
No answer as well...
Seems that none of developers here able to solve this... Or they don't know anything about this issue...
Up! Anyone here can resolve this? Or ppl here can't even solve small bug like this?
Useless to ask here... =,="'
bump =,="'
Please upload here your 10.6.0053.1000 cab. I have a look of it.
I just install the 10.7.xxx available from microsoft's site and still like in the first post. T,T
Do I need to upload the latest WLM from Microsoft's site?
And thanks for your help...
And I think, it might be something from registry's missing (maybe something in HKEY_Classes_Root)....
If I do HardReset, all is solved, but it's pain for me to reinstall all apps and do re-setting all things inside... >,<
Sorry I need the 10.6.0053.1000 cab before I can help you. It`s not on the windows side. Please upload it here. This was the first cab that you install or was in the rom and I must test it. No cab - Sorry no help.
Wait, I must search the cab file first. Because I already overwrite it with new one.
And the old one that came with my ROM is v10.6.0034.0800.
The v10.6.0053.1000 I downloaded it from Microsoft's site also. And I will try to recover that installation file from my harddisk.