how can I get rid of 3 beeps, that hearing after call is done and red button is pressed? They are like beebs, that sounds when adjusting earpiece (during call). Beeps appeared after the hard reset.
I have had them for as long as I own my magician and my Vario, I have found no way to turn them off, so I am suffering from the same annoying sounds.
I hear them everytime the gsm signal is not available and so the call (i'm trying to do) is automatically closed.
If i close a call with the red phone button or touchscreen, instead, i don't hear them. Weird!
Bye
heh, it seems like normal thing in this way...
Ok, I'll try to ignore them! This is the simpliest way :wink:
Hi everybody,
I have this one problem. After 2 days of usage, my Hermes suddenly went mute. No vibration or screen click can be heard even If I changed it to the loudest. I missed a lot of calls and sms due to this problem. The only way to solve this problem that I employ is by soft-reset my device.
I really hope somebody can help me tracking to root-cause of this problem and in the same time providing or proposing a solution to it.
Kindly help. Regards
morisa
Device: DoPoD 838Pro
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Phone goes mute
I think I'm having that problem too. Just out of the blue it happened. Didn't install anything extra the whole week. But when someone calls it rings, and if it's missed, it doens't play the miss call tone... or any other sound in that case.
darky said:
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Click to expand...
Click to collapse
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
mmorisa said:
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
Click to expand...
Click to collapse
Got the same issue here and I don't use speakerphone
my pda´s auto mute so
No sound although speaker icon no in mute
I have the same problem. Out of the blue no sound is heard at all. I tried changing volume but it did not do any thing. Had to shut down (not soft reset) and restart device and it works fine. This happen several times and I can figure out why it does this.
If anyone can help...
Tal
Same here, I'm using a X01HT Softbank variant TYTN flashed with the latest HTC WWE rom and after about like 12 hours of use the device goes mute for some reason, making calls it works perfectly but playing sounds or ringers the speaker does not work. Anyone have any ideas? I'm thinking of maybe re flashing the device since most of my information is on my storage card. I'll see if that fixes the problem :-\.
same problem here....
Same here. Only a reboot fixes it.
I have the same problem but it only happens when using the speaker phone. After the call ends, then there are no more system sounds etc. I then have to soft reset, which pisses me off as I use the speaker phone plenty in the car.
If i dont use the speakerphone, then there is no problem. Kind of strange....
Has anyone got any ideas on how to solve this?
I have same problem. I thought it was software related, but seems that it is caused by the speaker phone. I had the exact same problem with my old IPAQ 6515. It must be a software issue with WM although the 6515 had WM2003SE and the TYTN has WM5 so I do not know. Really annoying though as I use this phone for an alarm and it never goes off because the sound turns off sometime while I am sleeping - Uhggggg!
I also have the problem. Only a Softreset brings the speaker back to live.
my new problem...misery loves company
same here; curiously 2 pages into this thread and there are no real solutions.
I have solved the problem on my TyTN.
The Midlet Manager is the root cause for the Phone Mute issue on my device.
lol I just started getting this issue out of the blue after a couple of months and I didn't install anything :|
yeah nothing but a soft reset brings the sound back
Happens to me too. Strange coincidence - I've just checked my m3100 and it's giving me the silent treatment now. Time for another soft reset
I never use Midlets, so that rules the above theory out for me. However my battery was almost dead. I was using WiFi at the time, which turned itself off when the warning notifications popped up. Maybe when the battery drops below an acceptable level it turns the sound off to save power, but doesn't restore it after charging?
nope it happens to me even if my battery is fully charged
this used to happen on my i-mate PDA2k, and my JasJar (Universal) running both WM5, AKU3.2, 3.3, 3.5 and unfortunately even WM6 :S
Hi All,
After checking and testing the phone. I found out that the only way for me to solve the muting problem is by silencing the notification sound when a new email arrives. Since I have an unlimited EDGE/GPRS, my push mail is working around the clock. Thus, by not having the new email sound notify, the muting problem gone. This is caused by the notification event locking up the sound and not releasing it even after I read the mail. Previously the only way to resolve is by soft-reset but now, no more.
I have no idea whether this work or not for others but you might try and post your solution here.
Regards,
morisa
Hi folks,
I seem to have a problem with my sound - on my o2 XDA-mini-s.
The volume is full on both sliders [accessed from the slider on the left hand side. but I cannot hear my ringtone or anything when I access the menu.
Plugging into the the earphones socket I can hear everything through the headphones. This has happened previously and a soft reset always sorts it - not this time - any ideas folks?
awaterhouse said:
Hi folks,
I seem to have a problem with my sound - on my o2 XDA-mini-s.
The volume is full on both sliders [accessed from the slider on the left hand side. but I cannot hear my ringtone or anything when I access the menu.
Plugging into the the earphones socket I can hear everything through the headphones. This has happened previously and a soft reset always sorts it - not this time - any ideas folks?
Click to expand...
Click to collapse
read http://forum.xda-developers.com/showthread.php?t=282745
Try this if you cannot hear the ringer or ringtone preview. Go directly to step 3 on the first post. You may need a registry editor. I use TotalCommander.
http://forum.xda-developers.com/showthread.php?t=258109&highlight=volume+solved
I've been running the latest Touch-IT rom for a few months with no problems.
Tonight however, my phone started acting weird. You all know the soft beep noise whem you press the end call button? That soft beep noise is now a loud ding, and very annoying. Soft resetting and power cycling did not help. Any insights?
Solved!!
There is another thread with the same problem and a quasi-solution of disabling the sound altogether. I wanted the sound to just return to normal, so I did a little digging in the registry..
Somehow, my registry was mysteriously screwed with. Under the following:
[HKEY_CURRENT_USER\ControlPanel\Sounds\DialPadCtlKey]
[HKEY_CURRENT_USER\ControlPanel\Sounds\Dialing]
[HKEY_CURRENT_USER\ControlPanel\Sounds\Ending]
The string values for Sound is supposed to be Midi2Wave_079_4098.wav, but they were all changed to dpadctl.mid somehow. I just simply changed them all back, and my phone is back to notmal. Problem solved!
Now the real mystery is how those key values changed on their own...
Today I experienced a strange issue with my Leo. The ring volume autosets itself to silent. I manually increase it to max (both ring and system) using the volume keys but immediately after exiting the volume control window it sets itself to silent. I tried to set it to vibrate only but - same thing, it goes to silent again. The sound icon in the taskbar shows normal volume (i.e. not silent). When I receive a call it does not ring nor it vibrates. Its silent. The device plays music and sounds normally. I believe there must be a registry key that somehow was changed but I'm not sure which program might have caused that.
I use Phonegate call filtering app and Iconsoft PhoneX but cannot find anything in their settings that would cause it. Also tried removing them - no effect. Soft reset - many times
HR may be?
are you sure it is setting to silent? it could be that the chosen ringtone doesn't exist anymore? Try changing to a different ringtone and back again.
Tried that but still with no success
hmm, could it be that you have an appointment set, and the phone set to go silent during appointments?
Stupid me! In the windows sounds and notification settings, Notifications tab I found that for the Incoming call event the ring type was mysteriously changed to NONE when it should be set to RING. I don't know how could this happen by itself... But thank you, samsamuel for your logical suggestions and sorry for posting before thoroughly check my device.
hehe no worries, it generally turns out to be something simple.