I-Go 2008 in Diamond Touch - Touch Diamond, MDA Compact IV Themes and Apps

Hi,
Is there anybody being succesfull in transferring the I-GO 2008 navigation software into Diamond Touch? I heard that it was possible and worked but I could not figure out how. I found in forums how to transfer the software to my PDA with Win mobile 5, but the same process was not succesfull with Diamond. My Rom is 1.93.479.3. The app would not finnish instalation and cannot be run after (it just would not start, though it appears in PROGRAMMS as if installed... Any advice?
Thanks.

Do you know why there is a search button in the upper bar?
http://forum.xda-developers.com/showthread.php?t=403325

ChiefmasterB said:
Do you know why there is a search button in the upper bar?
http://forum.xda-developers.com/showthread.php?t=403325
Click to expand...
Click to collapse
Now I found the button:_) Thanks mate, I was lost when I googled out a couple of non-related results.
I will read it
Thanx

I have it working on mine, email me for help.
[email protected]

I have installed Igo8 in my Diamond and it works. Then installation in device, you must copy igo8.exe from device to internal storage/igo8/ and start the application with it. excuse me for my english

delete anything within the [folders] key in sys.txt

UK Postcodes?
has anyone got postcodes working on iGo 8?
i have iGo running with UK maps, but can only search for places by address.
Cheers,

running iGo 8 on my XDA Diamond with original O2 Rom....
running fine with 3d terrain and buildings enabled....
GPS working without problem...search works by adress, poi...everything
only TTS suxx right now....
good ...small maps....(found no tomtom7 map for germany and the netherlands..so i used the 1GB version of western europe)
igo uses only ~360MB for maps (ger+ned) buildings poi speedcams etc....NIIICE

mugglesquop said:
has anyone got postcodes working on iGo 8?
i have iGo running with UK maps, but can only search for places by address.
Cheers,
Click to expand...
Click to collapse
you type postcodes in the CITY box mate

i've got full 7 digit postcodes in uk, BUT not for 2008.4 map only 2008.1

Igo8 will do 7 digit postcode
to get the 7 digit postcode search working in IGO8 do the following
1: download the postcode enabled map from here --> http://rapidshare.com/files/166750423/UnitedKingdom7PPC.rar.
2: after putting it in the map folder in your igo8.content/maps folder start the app
3: when running click find and in the box UNDER United kingdom, the one where you normally put the city put your post code, but (and this is important) you MUST put a space in it, eg DL17 2HR . if you try and put DL172HR you will only get as far as DL172 then it will jump to the 5 digit address.
I have this running on a Touch HD with full postcode search and it works a treat with 3D landscapes, looks very nice.
Have fun

IGO R8.3
majo551 said:
Hi,
Is there anybody being succesfull in transferring the I-GO 2008 navigation software into Diamond Touch? I heard that it was possible and worked but I could not figure out how. I found in forums how to transfer the software to my PDA with Win mobile 5, but the same process was not succesfull with Diamond. My Rom is 1.93.479.3. The app would not finnish instalation and cannot be run after (it just would not start, though it appears in PROGRAMMS as if installed... Any advice?
Thanks.
Click to expand...
Click to collapse
Hi,
I've installed and using the IGO R8.3 with my Touch diamond device. Use this sys.txt file Should work.

I have onCourse, and it's working but voice doesn't seem to work at all.
Want to try iGo. However, don't know where to get the required cabs/files, etc. Any help?

Related

Can't install new maps 7.25 on Cruise

Hello everybody,
first of all, this is not a post about warez, since I am talking about new western europe map v. 7.25 I have just bought from tomtom.com.
Well, before I had installed on my Cruise tomtom navigator 7 that I got from this post (http://forum.xda-developers.com/showthread.php?t=401679), and everything seemed to work fine: I could download the free test map, and also free voices. Then I wanted to buy and install the new western europe (v. 7.25) map, that is available from a few days on tomtom.com. To this purpose I created an account, registerd my device as a TomTom navigator 7 one, and then went to map shop and bought the map. Then I downloaded and installed tomtom home 2.3, and I tried to install the map on my device using it, I can see the map I bought but I am getting an error message that says that the map is not compatible with my device.
Can anybody help me?
Sorry for error!
Remember no warez here, edit your post.
Michelasso said:
Hello everybody,
first of all, this is not a post about warez, since I am talking about new western europe map v. 7.25 I have just bought from tomtom.com.
Well, before I had installed on my Cruise tomtom navigator 7 that I got from this post (http://forum.xda-developers.com/showthread.php?t=401679), and everything seemed to work fine: I could download the free test map, and also free voices. Then I wanted to buy and install the new western europe (v. 7.25) map, that is available from a few days on tomtom.com. To this purpose I created an account, registerd my device as a TomTom navigator 7 one, and then went to map shop and bought the map. Then I downloaded and installed tomtom home 2.3, and I tried to install the map on my device using it, I can see the map I bought but I am getting an error message that says that the map is not compatible with my device.
Can anybody help me?
Click to expand...
Click to collapse
Have you tried copying the card to your sd card? Just to the root folder?
As far as I know there might be still a problem with activating the card.
rgds
AndiHelldriver said:
Have you tried copying the card to your sd card? Just to the root folder?
As far as I know there might be still a problem with activating the card.
rgds
Click to expand...
Click to collapse
I cannot just download the map, the only way tomtom allows you to download it is using tomtom home, which says that my device is not compatible, so I have nothing to copy anywhere..
I don't know but is there a update or new version to make Tomtom, Tomtom 7.25?
Hey mate, sorry to hear that you have problems. I would like to know if there is a way to get this working myself before I buy a ver7 map myself.
I know there has been someone else getting this to work in this forum. Maybe you an set the device to something else for the SD Card in TomTom Home. If it doesn't work while the card is in the phone maybe try it in a card reader. Think that should work. Let me know if you have success
Cheers
I'm running TomTom 7.450 on my Polaris, and I'm using the Map of Norway,
Finland, Sweden and Denmark v7.20 without problems. The maps need to be purchased and installed via TomTom Home 2 (Set your device av TomTom 720).
pananza said:
I'm running TomTom 7.450 on my Polaris, and I'm using the Map of Norway,
Finland, Sweden and Denmark v7.20 without problems. The maps need to be purchased and installed via TomTom Home 2 (Set your device av TomTom 720).
Click to expand...
Click to collapse
These maps are not anymore available for TomTom 720, at least in Italian site now if you register as 720 you can only buy 8.10 maps that are not compatible with tomtom7, at least to my knowledge. If you register as a tomtom 7 device, as for example a vodafone touch diamond, you can buy 7.25 maps, as I have done, but then you get the "impossible to install on this device" error if you try to download them.
may be it is not for One
Not completely sure but maps for One devices are not always compatile with normal PPC tomtom version.
I had this kind of problem with Tomtom 6 - bought maps for tomtom 6 One and those were incompatible.
After talking to Tomtom support they changed my subscription.
Unfortunately I never used tomtomv7 but instead got iGo8.

TomTom 7 - Which maps??

I have the UK v6.75 maps already, and there are a LOT of errors with them.
For example we living in a brand new house (completed beginning of 2008) and our street, plus half the streets surrounding us just don't exist on TomTom. I can't even set my home location because it doesn't exist.
I noticed on the TomTom site there are no further updates planned for the Navigator 6 maps (which are basically what I have).
I looked at the Navigator 7 maps option and they are supposed to be for Touch Diamond and Touch Pro only and you have to select specific network.
So my question... Do the new v8.15 maps work ok with the HD (TomTom 7.450) and if so which device should I select when purchasing on TomTom?
Depending on your version of tt7. Only the latest version 7.9 will apparently work with 815 maps. The navcore has been re-written to read the version 8 maps. Selecting the pro or diamond will give you the same maps. Beware, maps can now only be downloaded within tomtom home, and the only version of this that will connect to the hd, is version 1.15 (pda version), not 2.4. Check that you can connect before your purchase.
Philio25 said:
I have the UK v6.75 maps already, and there are a LOT of errors with them.
For example we living in a brand new house (completed beginning of 2008) and our street, plus half the streets surrounding us just don't exist on TomTom. I can't even set my home location because it doesn't exist.
I noticed on the TomTom site there are no further updates planned for the Navigator 6 maps (which are basically what I have).
I looked at the Navigator 7 maps option and they are supposed to be for Touch Diamond and Touch Pro only and you have to select specific network.
So my question... Do the new v8.15 maps work ok with the HD (TomTom 7.450) and if so which device should I select when purchasing on TomTom?
Click to expand...
Click to collapse
only the ones ending in 2003, 2024, and 2059
Thanks for the responses.
I think perhaps I should play it safe then and wait for official HD support from TomTom, I'm sure once they officially have a version available it'll be no problem to use the latest maps!
Matterhorn said:
only the ones ending in 2003, 2024, and 2059
Click to expand...
Click to collapse
WRONG! Only the ones ending in 2024 work with 7.9 all the others are for the PNA navcore.
ardsar said:
Depending on your version of tt7. Only the latest version 7.9 will apparently work with 815 maps. The navcore has been re-written to read the version 8 maps. Selecting the pro or diamond will give you the same maps. Beware, maps can now only be downloaded within tomtom home, and the only version of this that will connect to the hd, is version 1.15 (pda version), not 2.4. Check that you can connect before your purchase.
Click to expand...
Click to collapse
My PDA version of TomTom Home is version 1.5 which worked perfect with the HD.
mmdirk said:
My PDA version of TomTom Home is version 1.5 which worked perfect with the HD.
Click to expand...
Click to collapse
appologies, i meant version 1.5
dragon_soft said:
WRONG! Only the ones ending in 2024 work with 7.9 all the others are for the PNA navcore.
Click to expand...
Click to collapse
Well, then I guess I have a magic HD then
Oh, have you read this? http://forum.xda-developers.com/showthread.php?t=445460
You can add Brazil 2095 to the list. To your credit, some 2003 maps don't work.
BTW, there is no need to yell, especially when you are wrong!
The problem I had was finding a version of TomTom that worked! The only one I've been able to get to work is 7.45, couldn't find a 7.9 version that worked (tried the Diamond/Raphael cabs and they wouldn't install). Anyone know where I can get 7.9 which works?
If you have 7.45 installed, you can try extracting the tomtom navigator application and the data file from the 7.9 cab, and over write the existing files in the navigator folder.
Interesting - I have one map under storage card, my documents and it is recognised - then I copy my other map 6.75 at the same place and it is not recognised !
WHY ?
Under the root directory is the old map - do I have to remove it may be ?
I`m using TT 7.45
ardsar said:
If you have 7.45 installed, you can try extracting the tomtom navigator application and the data file from the 7.9 cab, and over write the existing files in the navigator folder.
Click to expand...
Click to collapse
I'll give this a go, thanks
peter7 said:
Interesting - I have one map under storage card, my documents and it is recognised - then I copy my other map 6.75 at the same place and it is not recognised !
WHY ?
Under the root directory is the old map - do I have to remove it may be ?
I`m using TT 7.45
Click to expand...
Click to collapse
You have to install new maps via TT Home so they are licensed properly.
I transfered by maps from my Kaiser, TT Home asked for the license key again to install them on my HD.
ardsar said:
If you have 7.45 installed, you can try extracting the tomtom navigator application and the data file from the 7.9 cab, and over write the existing files in the navigator folder.
Click to expand...
Click to collapse
It didn't work
Said it wasn't compatiable with my device when I ran TT.
do a google search for ttn7.910.9185_vga_black
ardsar said:
do a google search for ttn7.910.9185_vga_black
Click to expand...
Click to collapse
Whatever I try to Google with ttn7.910.9185_vga_black, can't find anything common!?

Tom Tom Working But!

I have amanged to get tomtom 7.450 and it is working, i have downloaded the free map of London and all is fine.
However i want to add additional maps and this is where i get stuck. I have TT6 maps and would like to use them, i know that others have got this to work. However i cant access using tom tom home as the latest version of TT Home does not recognise the TomTom version 7 on my HD.
Is there another way to load the TT6 maps from the DVD to the device?
Can i get TT Home to work to transfer the maps, i did hear that TT Home 1.5 may be the answer but i cant find any where to download it?
Any help much appreciated
warning on the TomTom website when ordering maps for Navigator 7:
Remark "Please note that maps for Navigator 7 are only compatible with devices that have this software pre-installed. Please ensure that you have Navigator 7 installed on your device before purchasing a map."
The maps for Navigator 7 are 8.15 maps.
TomTom v7 is not supposed to be running on a hTC touch HD
tomtom HOME 2.5 is the one you need to install maps for Navigator 7. you can download tomtom HOME from the tomtom website (one of the few items you can download for free)
I am using Tom Tom Home 2.5 and it tells me that i am using an incompatable version of Tom Tom Navigator for my device and thus i cant install anything, to be honest that is why i am looking to install the maps without using tom tom home, or using tom tom home 1.5 which appears may work with the HD
TT7 does not support TT6 maps,
install tt6 instead, simple.
wampots said:
I have amanged to get tomtom 7.450 and it is working, i have downloaded the free map of London and all is fine.
However i want to add additional maps and this is where i get stuck. I have TT6 maps and would like to use them, i know that others have got this to work. However i cant access using tom tom home as the latest version of TT Home does not recognise the TomTom version 7 on my HD.
Is there another way to load the TT6 maps from the DVD to the device?
Can i get TT Home to work to transfer the maps, i did hear that TT Home 1.5 may be the answer but i cant find any where to download it?
Any help much appreciated
Click to expand...
Click to collapse
TT6 Does not work on the HD, and i cant install the TT6 maps without being able to use TT Home
Can i ask if you have TOMTOM working on your HD:
What version of TT?
What version of the Maps?
Did you use TT Home and if so what version?
If you did not use TT Home how did you load the maps?
Sorry to be a pain but this is driving me nuts! and i really want to get this to work
I have been really stupid. I have installed TomTom7 9.10.9185 and it is working fine, I then purchased v8.15 maps for UK & Ireland but the link I have been sent just tells me to download through TT Home 2.5, which as you know isn't an option.
Is there anyway of downloading the maps that I have purchased from a direct link? Or can I get a refund?
ScarySquirrel
Look if it makes you feel better I have TomTom7 9.10.9185 running and Home 2.5.1.36 and as you know I have the westen map.
I downloaded the home of the tomtom site and set it to pocketpc.
MDAIIIUser said:
ScarySquirrel
Look if it makes you feel better I have TomTom7 9.10.9185 running and Home 2.5.1.36 and as you know I have the westen map.
I downloaded the home of the tomtom site and set it to pocketpc.
Click to expand...
Click to collapse
Where do I set it to PocketPC?
fastie said:
TT7 does not support TT6 maps,
install tt6 instead, simple.
Click to expand...
Click to collapse
There is TomTom7 9.10.9185 with a link on this forum that does run TT 6.75 maps. Look in one of the other several threads that have already been going on for weeks about TT.
ScarySquirrel said:
Where do I set it to PocketPC?
Click to expand...
Click to collapse
To be honest I dont remember.
Here is however what I do remeber.
There was a thread around that told you how to copy files onto your SD card that made Home think that you had a different version as a device (pass on whihc one but is one of those hardware boxes for your car).
I used this and it worked fine, so then Home said it needed to update, after doing that I scaned for devices and it found a pocket pc.
So try the scan for device whilest connected else see if you can find that thread. it was a long time ago, sorry, not trying to be an A** but I just cant remember.
MDAIIIUser said:
To be honest I dont remember.
Here is however what I do remeber.
There was a thread around that told you how to copy files onto your SD card that made Home think that you had a different version as a device (pass on whihc one but is one of those hardware boxes for your car).
I used this and it worked fine, so then Home said it needed to update, after doing that I scaned for devices and it found a pocket pc.
So try the scan for device whilest connected else see if you can find that thread. it was a long time ago, sorry, not trying to be an A** but I just cant remember.
Click to expand...
Click to collapse
No, that's useful mate, thank you. At least it gives me a direction to go in, I'll do some digging and see what I can find.
ScarySquirrel said:
No, that's useful mate, thank you. At least it gives me a direction to go in, I'll do some digging and see what I can find.
Click to expand...
Click to collapse
Does anybody already has a solution?
I'm interested in this, too.
I was starting to lose hope with this, if anyone does resolve please post it here
did you get this to work?
TomTom Home 1.5 worked great for me as it recognized the mircoSD card first in my Kaiser and then also a card in the HD. To locate TTHome 1.5 Google: fixya tomtom home 1.5. This then allowed me to move my 6.75 Western US States maps from one card/device to the other.
TT7.910.9185 works perfectly, thanks do Dr_S, found here: http://forum.xda-developers.com/showthread.php?t=432410&page=10

GPS Navigation

I have spent the evening reading all the posts on navigation. Have tried Tom Tom 6 and 7 with out success, tried the versions below:
TomTom 7 V7.450
TomTom 7 V7.910 (9185)(free ram 122.6)
TomTom 6 V6.033 (8358)
Please help, device just locks up
i tried to use many programs but they didnt work properly then i used Igo8 its perfect try it out
i have Garmin Mobile XT version 5 with 2009 maps. everything works fine but there is a lag of about 1-3secounds i guess? its fine but annoying when you have to do a couple turns one after another.. but oh well.. good enough. i tried Tom Tom 7.9 and 7.4 and they worked but i didn't like the layout and features\\
EDIT: im trying to get rid of the lag but im not sure how... does anyone have an SD card tune up? or know anything else i can do?
I'm using Tomtom 7.910 build 9185 with the 815.2024 maps, and it works like a charm. Try getting another version with the same buidl as mine.
Route 66
Have a look at "route 66" (66.com). seems to be working on a HD.
hm ... i got the v7.450 version workin on my hd.
TomTom 7.910 / Map v675 - West Europe.
Installation using the cab for TT and tomtom home for the map.
No lag, no installation issue, it just works.
Can you post the cab? Maybe mine is bad
aimache said:
TomTom 7.910 / Map v675 - West Europe.
Installation using the cab for TT and tomtom home for the map.
No lag, no installation issue, it just works.
Click to expand...
Click to collapse
http://www.megaupload.com/?d=VJUP3XXT
This is the .cab i used and it works fine
Assuming I use this cab on my HD and it works, what do i have to do to get maps for it?
I assume i go to tomtom.com -> maps and choose Navigator 7 there, but then it asks for which device I want the map... does it matter what I choose there?
edit: tested the cab, seems to work, but of course i have neither voices nor maps. Have to try to get those...
edit2: if i try to add something to the device using tomtom home it always tells me that i have the wrong version of tomtom installed and that i therefore cannot use tomtom home. so, how do i get the standardvoices or a (at the moment purely hypothetic) seperately bought map onto the HD?

Leo and TomTom Home

TomTom Home doesn't recognise Leo, any workarounds guyz ??????????
make sure that windows mobile applicationcenter is on
malix007 said:
TomTom Home doesn't recognise Leo, any workarounds guyz ??????????
Click to expand...
Click to collapse
Hi
There is may be a workaround here but i don't know about it. Officially Tomtom home won't support HD2. But use a t7.915.cab will be the easiest way to install Tomtom in the HD2 and it works great. You can find this cab file also here in xda. Just search
Good luck
webjunky said:
make sure that windows mobile applicationcenter is on
Click to expand...
Click to collapse
I have Windows Mobile Device Centre installed and it runs in the background and works fine.
sabes143 said:
Hi
There is may be a workaround here but i don't know about it. Officially Tomtom home won't support HD2. But use a t7.915.cab will be the easiest way to install Tomtom in the HD2 and it works great. You can find this cab file also here in xda. Just search
Good luck
Click to expand...
Click to collapse
I know that cab works on HD2 but the TomTom Home software installed on the computer won't recognise HD2 when it is connected to the computer.
is there any possibility with windows xp, so it means, with activesync instead of mobile device centre.
i´ve bought the traffic information, but can´t update my hd2 with it yet.
thanks!
mario
Try tomtom home 1.5. I'm sure this works but will try and check and post reply.
spoogedemon said:
is there any possibility with windows xp, so it means, with activesync instead of mobile device centre.
i´ve bought the traffic information, but can´t update my hd2 with it yet.
thanks!
mario
Click to expand...
Click to collapse
TomTom Home 1.5 on XP does work with HD2 but there is no map share and you can not download anything. All it does is recognise the handset.
P.S. If you have active traffic subscription, you don't need to connect your HD2 with TomTom home to update traffic. Just enter your account details in to the MY ACCOUNT section in TomTom software on your handset and enjoy!
TomTom Home does'nt currently support HD2 so we need to wait for an update. I notice in your SIG that you have a touch Diamond,If you still have it, You can update the map on your Diamond and transfer the 4 files needed to HD2 (MapServerPatch,ServerLineIndex,ServerNameIndex,PatchFilter)
LondonTownGuy said:
TomTom Home does'nt currently support HD2 so we need to wait for an update. I notice in your SIG that you have a touch Diamond,If you still have it, You can update the map on your Diamond and transfer the 4 files needed to HD2 (MapServerPatch,ServerLineIndex,ServerNameIndex,PatchFilter)
Click to expand...
Click to collapse
What are these files for ?
malix007 said:
What are these files for ?
Click to expand...
Click to collapse
These are the files placed in your map folder by TomTom home, used for the mapshare updates. You can tell by the dates on the files, eg. if you update the map today, those 4 files will be dated todays date. If you copy them over to your HD2 Map then you will have the latest mapshare update.
I can install Tomtom Navigator 6 on my HD2 up to the point that the cabs are moved onto my SD card (16GB) and the card is installed. At that point the cab installs successfully and TomTom opens a setup screen, which seems to ask the interface language and left/right hand preferences. But this screen is scrambled (wrong resolution) so it's impossible to enter a response and it locks up. Has anyone got a work-around for that?
Strangely, that happened the first time I installed on the TyTnII; but then I was able to make out enough to press the right buttons and it worked fine after that.
Tomtom version 6 or 7
I tried to install tt6 - installation from cab without problems - but cannot open the program. Installed tt7.915.916 black, but it cannot recognize my maps from Western europe or Scandinavia - and installation was not possible on SD card.
I bought a licence from TT (version 6) and the programme was running very well on my HTC 3300. Are someone able to solve that problem ?
See http://forum.xda-developers.com/showthread.php?t=610864

Categories

Resources