i was spl1.04 orginal and i upgraded hard spl7,
however i've check by mtty that i'm not sure supper CID yet, so i follow here instruction to become supper CID but fail.
I've download the file and put sspl in herm200 and run autoupdate, it prompt load fail.
But result i've got my spl become spl1.40olipro ???
i am just confuse that what spl i am. Do i still hard spl? if i want upgrade to hard spl 7 , do i need to back to spl mfg ->spl 1.04 ->hard spl 7?
can i spl1.40olipro->hard spl 7?
SSPL was probably your misstep.
At this point just re-flash the latest Hard-SPL and you should be fine. You'll have SPL 2.10.Olipro also be "SuperCID" without actually changing your CID.
THEN, quit hacking around and do some reading before you make your next move.
thanks that i am back to hard spl 7 now.
Hello, I have Arte100 and all I can do is to enter in boot mode... I try to update rom, but always get "error 226".
ipl 1.12.0001
spl 1.12.000
Any help maybe?
Thx
I have similar problem, here I need official rom 1.12.404.1 NLD.in case you find something, help and me please
ok man...
If you phone its htc p3300 nld,try this:http://www.filestube.com/7ecfb875ce01017303ea/details.html
3.13.404.1
SPL locked, so you get the error!
Unlock USPL first then afterthat flash!
SPL shall become 1.11 instead of your 1.12..
follow these steps:
1) USPL your device click here
2) Flash any new rom you like click here for original shipped roms or search this forum for any other rom you like....
Hi All,
I need your help in urgent!!!
My ELF GSM infor:
- DeviceID: ELF011000
- CID : DOPOD701
My ELF worked fine before I tried to upgrade its IPL from 1.11.0002 to 2.26.0002, then this problem occur. Because a WM 6.1 ROM requires to have IPL 2.27.0002 and SPL 2.28.0000 so I kept continue upgrade the IPL/SPL to 2.27.0002 and 2.28.0000.
I tried to flash my ELF, from bootloader mode, with these ROMs:
- RUU_Elf_DOPOD_chs_1.11.706.1B, this ROM I got from a China forum, it is my device original ROM
- RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93.90_Ship.exe
- RUU_Elf_DOPODASIA_WWE_1.17.707.2B_4.1.13.46_02.97.90_BLUE_Ship.exe
- RUU_Elf_HTC_Asia_HK_WWE_1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship.exe
- ESSential_4_5
- Onyx_jr_4_4_2_Light
They are all 100% successfull but the IPL/SPL unchanged (2.27.0002 and 2.28.0000) and the device still loop at smart mobility, can not jump into OS.
I did try to use unbricker ROM and goldcard (with original ROM or unbricker ROM inside) but the ELF still stuck at smart mobility...
Please give me your advices, what should I do (except buying a new phone)?
Thanks for your time!
Flash your Official ROM
rockerboom said:
Hi All,
I need your help in urgent!!!
My ELF GSM infor:
- DeviceID: ELF011000
- CID : DOPOD701
My ELF worked fine before I tried to upgrade its IPL from 1.11.0002 to 2.26.0002, then this problem occur. Because a WM 6.1 ROM requires to have IPL 2.27.0002 and SPL 2.28.0000 so I kept continue upgrade the IPL/SPL to 2.27.0002 and 2.28.0000.
I tried to flash my ELF, from bootloader mode, with these ROMs:
- RUU_Elf_DOPOD_chs_1.11.706.1B, this ROM I got from a China forum, it is my device original ROM
- RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93.90_Ship.exe
- RUU_Elf_DOPODASIA_WWE_1.17.707.2B_4.1.13.46_02.97.90_BLUE_Ship.exe
- RUU_Elf_HTC_Asia_HK_WWE_1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship.exe
- ESSential_4_5
- Onyx_jr_4_4_2_Light
They are all 100% successfull but the IPL/SPL unchanged (2.27.0002 and 2.28.0000) and the device still loop at smart mobility, can not jump into OS.
I did try to use unbricker ROM and goldcard (with original ROM or unbricker ROM inside) but the ELF still stuck at smart mobility...
Please give me your advices, what should I do (except buying a new phone)?
Thanks for your time!
Click to expand...
Click to collapse
First try to flash your official ROM and then try to flash ipl/spl again follow step by step. After that try to flash customize ROM again. Hope you will success.
Dear ELF341,
Thanks for your advice!
When I flash the original ROM, 100% successful, then my ELF loop at the China Mobile screen then reset... I don't have the IPL1.11.0002 and SPL 1.11.0000, the lowest I have is IPL1.17.0002 and SPL1.17.0000. I tried to flash back the 1.17 version, after 100% successful, enter bootloader, the IPL 2.27.0002 and SPL 2.28.0000 still remain!?
Please tell me how to do!
Thanks for your time!
rockerboom said:
Dear ELF341,
Thanks for your advice!
When I flash the original ROM, 100% successful, then my ELF loop at the China Mobile screen then reset... I don't have the IPL1.11.0002 and SPL 1.11.0000, the lowest I have is IPL1.17.0002 and SPL1.17.0000. I tried to flash back the 1.17 version, after 100% successful, enter bootloader, the IPL 2.27.0002 and SPL 2.28.0000 still remain!?
Please tell me how to do!
Thanks for your time!
Click to expand...
Click to collapse
After flash back to official ROM , enter bootloader and check ipl/spl first.
Normally, if you flash ipl/spl (not hard spl) when you flash back to the official ROM the ipl/spl will back to original. S/R - wait for boot to WM if OK then do H/R again. And flash ipl/spl again - enter bootloader and check ipl/spl again (changed or not) if OK after that I recommended you flash Onyx ROM. I used it for long time and no trouble.
Hope, it's can help you.
Dear ELF341,
Thanks for your reply!
After 100% successful loading the original ROM, my ELF restart and loop at the China Mobile screen... When I enter bootloader, the IPL/SPL still remain as IPL 2.27.0002 SPL 2.28.0000
I understand that when we flash the original ROM, the IPL/SPL will roll back to its original version, but mine is so strange?! Does this mean that:
- My ELF's flash ROM is fail or locked at the region for IPL/SPL so that whatever ROM I flash (these ROM contain ILP,SPL,OS,radio..) the IPL/SPL unchaged?
- The original ROM is actually not match to my ELF?? But I already flashed the other ship WWE ROM and also the unbricker ROM, they all loop at smart mobility...
Please help me!
rockerboom said:
Dear ELF341,
Thanks for your reply!
After 100% successful loading the original ROM, my ELF restart and loop at the China Mobile screen... When I enter bootloader, the IPL/SPL still remain as IPL 2.27.0002 SPL 2.28.0000
I understand that when we flash the original ROM, the IPL/SPL will roll back to its original version, but mine is so strange?! Does this mean that:
- My ELF's flash ROM is fail or locked at the region for IPL/SPL so that whatever ROM I flash (these ROM contain ILP,SPL,OS,radio..) the IPL/SPL unchaged?
- The original ROM is actually not match to my ELF?? But I already flashed the other ship WWE ROM and also the unbricker ROM, they all loop at smart mobility...
Please help me!
Click to expand...
Click to collapse
How you flashed ROM ? By RUU (PC) or used microSD card. I recommened you to use RUU (PC) follow step by step. Sometime when I used microSD card to flashed ROM , it's successful but cannot boot, after that I flashed Official ROM by RUU and unlocked the phone again it's back to normal. And your official ROM, you must check with your operator or distributor because in different zone it's use diferent ROM.
Dear ELF341,
I only can flash via PC RUU, I don't succeed in SD card way:
- When I copy the *.nbh file into SD card, then enter bootloader, I just can see the checking SD card content string displayed very fast, then the tri color screen.
- When I create a goldcard and copy *nbh file into it, enter bootloader, the brick ask for 'upgrading SD image', I press power button for it to start download but it hang at 'downloading from SD' with a blank download status bar.
Actually I bought this ELF from a man on my local site, so I don't know where is the distributor...I used the mtty and usb monitor to check for my device infor, then search internet for my original ROM, I only can find in a China forum that match my deviceID/CID....
For my case, I really don't know why I can not change its IPL/SPL version? Please help me!!!
Thanks for your time!
well u hav to rename the nbh file to ELF0IMG for SD card flashing to work.
Hello there xda community,
I have a problem regarding my HTC Blackstone. I have been flashing lots of ROMs and I know how it works. Once I decided to test an Android build for it by flashing a <1.56 Olinex SPL and I did downgrade it. But then I can`t flash it back to HSPL 1.56 Olinex, it gets stuck on 0%. I have tried the SSPL and it did succeed, so I continued my test. Did the Task 29 but it got stuck on 0% again when I tried the Task 32. I got into bootloader to see if 1.56 Olinex SPL was still installed on my phone but suddenly it changed to 1.15.0000 SPL stock. Now I don`t have WM installed, due to Task 29, I have the stock SPL on which I can` install the stock ROM for my HTC. I tried flashing a ROM with the SD card, but when it gets into the bootloader it gets stuck on the "Loading..." screen. I also tried the USPL GUI by crackwhore but it can`t detect the drivers even though I installed the drivers provided with the USPL GUI. Please, I am desperate in trying to fix this, help me out!
Same problem here, can't flash anything, neighter stock ROM, it goes to 4% and gives me Invalid vendor ID error.
I have SPL 1.56
Tried everything but no luck.
(flashed a new ROM,did a task29 after and from 1.56 Olinex SPL went to 1.56. I can't HSPL, USPL, flash back original ROM or any other Custom ROM, neighter downgrade SPL)
I have a Herm100 (O2 Xda trion) i tried to upgrade the rom from sd card the offical HTC rom i did the update after then the phone dont want to load in after the boot screen it stucked.
I have:
IPL 1.04
SPL 2.03
all the time i try to upgrade from 2.03 to 2.10 it says 00028002 or 00068002
I tried several procedure but nothing worked please if somebody can halp PLEASE HELP!: confused: