Touch_IT for wing-Full edition - Help Please! ! ! - Wing, P4350 General

ok hopefully someone can tell me what i'm doing wrong if anything. . . I previously installed touch-it v2.3 with no problem but i have tried at least 15 times to put the touch it full version and have no luck. I'm lost. I even went back and did the v2.3 again and it worked fine. any ideas? I am using ruu version 4.26.531.1, i am installing aserg then soft reseting then running 1__UPGRADE_ROM.bat . . . then when i hard reset it gets stuck on the t mobile white screen. driving me nutz!

Is Ur Device Hard Spl'd?

HardSPL doesn't really mean anything in this case, because he's using aserg's method to try to flash.
My advice- don't flash this rom. get a newer rom that uses HardSPL/USPL. It'll also be wm6.1 (shiny shiny). PDOCwrite (asergs method) is kinda old.

fzzyrn said:
HardSPL doesn't really mean anything in this case, because he's using aserg's method to try to flash.
My advice- don't flash this rom. get a newer rom that uses HardSPL/USPL. It'll also be wm6.1 (shiny shiny). PDOCwrite (asergs method) is kinda old.
Click to expand...
Click to collapse
Where can i get one of these 'newer roms' you speak of? also i tried to make sense of dougstoner's directions on how to hardSPL and call me a nub but i couldn't make sense of it. . .

This rom is really old. check the post dates, but the roms are numbered by version. Higher version=newer version. Aserg's method is what we used to use to flash roms back in the day before HardSPL (herald was weird in that HardSPL was released AFTER many people got it)
Anywhoo, for HardSPL, go to the HardSPL thread, read it over and then follow these directions.
There are 3 cabs. Install them in the order that Papamopps posted. Soft reset, and then run the HardSPL RUU (romupdateutility.exe) to HardSPL your device.

fzzyrn said:
This rom is really old. check the post dates, but the roms are numbered by version. Higher version=newer version. Aserg's method is what we used to use to flash roms back in the day before HardSPL (herald was weird in that HardSPL was released AFTER many people got it)
Anywhoo, for HardSPL, go to the HardSPL thread, read it over and then follow these directions.
There are 3 cabs. Install them in the order that Papamopps posted. Soft reset, and then run the HardSPL RUU (romupdateutility.exe) to HardSPL your device.
Click to expand...
Click to collapse
Alright my device is now successfully Hard Spl'd . . . thanks a lot! Now to find the newest/best touch it rom. . . Anyone have a link for me? I am using Touch-IT v4.4 stuffed atm

just look at the version numbers for the newest. Many people have their own preferences, but i feel that Open Touch 6.5 lite (no spb or tl) is just brilliant. But thats probably because i use it.
one question- is touch-it 4.4 wm6.1 or wm6? I'm pretty sure its 6.1, but i gotta clarify

fzzyrn said:
just look at the version numbers for the newest. Many people have their own preferences, but i feel that Open Touch 6.5 lite (no spb or tl) is just brilliant. But thats probably because i use it.
one question- is touch-it 4.4 wm6.1 or wm6? I'm pretty sure its 6.1, but i gotta clarify
Click to expand...
Click to collapse
man honestly i have no idea how to even check that. . .and if u could help me out with a link to download open touch 6.5 lite (the version u have) i would be greatly appreciative! I promise im not lazy i just never find it when i search the forum. . .thanks again! ! !

here you go buddy......
http://forum.xda-developers.com/showthread.php?t=400642

touch it 4.4 is wm6.1

Related

[Q]please help me guys

Hi, I have elfin (HTC Touch) and I have Windows Mobile 6 professional and I want to upgrade it to 6.5 so can anyone type me a link so I can download the ROM directly because there is more than one ROM in the forum and I'm afraid to download a wrong one so please help me...thanks
First you read this guide completely.
Link:http://forum.xda-developers.com/showthread.php?t=406721
I read it well and I knew big information about my elfin but really I don't know how to start please tell my what to do first I can tell you the info about my elfin
ROM Version:2.20.707.1B WWE
ROM Date:10/02/07
Radio Version:03.07.90
Protocol Version:4.1.13.51
EXT ROM Version:2.20.707.101
Windows Mobile 6 Professional
CE OS 5.2.1620 (Build 18125.0.4.2)
mind my sarcasm...but he meant to say...to upgrade your device without damaging it...you will need to follow some instructions....and if you read it well and if you are a sane guy...then you would atleast EDIT your POST and remove the god damn IMEI of your device....people dont give away their IMEI jus like that you know...its something only you should know...and jus so you know...i m not trying to piss you off cos you are as we call a newbie....so here is a breakdown of what you need to do
1. your device is an ELFIN...so we know
2. jus like you unlock your sim to use your phone...you need to unlock your device...(so that it becomes writable)
3. to do so...you would need to make use of a part of software called USPL and IPL...USPL does the part of keeping your device unlocked...and IPL needs to remain the same series....if you flashed a USPL of 3.XX then your IPL shud be 3.XX series
4. now do the reading on your own this time and discover all flavours of 6.5 ROMS available here....
btw i wonder why you havent tried the official 6.1 ROM from HTC
thanks so much, first i don't know even the difference between the 6.1 and the 6.5 but when i saw some topics about 6.5 and the people said that it works better with the HTC touch so I think in that, now i made a backup ROM from the one i have is that good step and i already downloaded 2 different ROMs from the forum (http://forum.xda-developers.com/showthread.php?t=552371 , http://forum.xda-developers.com/showthread.php?t=426540)
but how can i make the device rewritable is there a application i can download? and what's your opinion to upgrade to 6.1 or 6.5?
Upgrade to 6.5 Final Build 21234.
Link:http://forum.xda-developers.com/showpost.php?p=3346614&postcount=5230
zoom-z said:
thanks so much, first i don't know even the difference between the 6.1 and the 6.5 but when i saw some topics about 6.5 and the people said that it works better with the HTC touch so I think in that, now i made a backup ROM from the one i have is that good step and i already downloaded 2 different ROMs from the forum (http://forum.xda-developers.com/showthread.php?t=552371 , http://forum.xda-developers.com/showthread.php?t=426540)
Click to expand...
Click to collapse
Tht's a good thing to backup your Original ROM, should be helpful in case of errors, bricking or re-servicing. (though i forgot to do mine )
zoom-z said:
but how can i make the device rewritable is there a application i can download? and what's your opinion to upgrade to 6.1 or 6.5?
Click to expand...
Click to collapse
There's is no problem about being not rewritable or sort! Once you CID unlock and upgrade your IPL/SPL, you can upgrade or degrade your device to any ROM you like whenever u like!
About opinions, there are alot of people here and would obviously have their own different opinions and so you will have too! I'd ask you to try out ROMs yourself and use the suitable one you choose. If you'd like to have a stable ROM, i'd advice you to use the 6.1 ROMs and if you'd like to have newer latest builds, you can go for the 6.5 ROMs (which have been optimized to their best stable by respective cooks). In the end, its up to you which you choose as your BEST ROM!
PS: Do read if the ROM is suitable for your device, in this case- Elfin and few FAQs posted out by the ROM cook. Respect others work and last but not least Read & Search before asking Questions!!
Thank you very much I finally upgraded my elfin to windows mobile 6.5 and it's awesome but i still have one more thing i want to make it read and write Arabic language without convert the whole interface is there a patch? I already searched about that and i found a file but it's not an application and I don't know how to use it. before that in my old 6.0 i downloaded an application when i install it, it solves the whole situation then i tried it with the 6.5 but the start menu won't open after i installed it so i formatted the ROM.
ayyu3m said:
mind my sarcasm...but he meant to say...to upgrade your device without damaging it...you will need to follow some instructions....and if you read it well and if you are a sane guy...then you would atleast EDIT your POST and remove the god damn IMEI of your device....people dont give away their IMEI jus like that you know...its something only you should know...and jus so you know...i m not trying to piss you off cos you are as we call a newbie....so here is a breakdown of what you need to do
1. your device is an ELFIN...so we know
2. jus like you unlock your sim to use your phone...you need to unlock your device...(so that it becomes writable)
3. to do so...you would need to make use of a part of software called USPL and IPL...USPL does the part of keeping your device unlocked...and IPL needs to remain the same series....if you flashed a USPL of 3.XX then your IPL shud be 3.XX series
4. now do the reading on your own this time and discover all flavours of 6.5 ROMS available here....
btw i wonder why you havent tried the official 6.1 ROM from HTC
Click to expand...
Click to collapse
are there official 6.1 rom from htc? or is it for elfin only because i can't find official 6.1 for elf..
zoom-z said:
Thank you very much I finally upgraded my elfin to windows mobile 6.5 and it's awesome but i still have one more thing i want to make it read and write Arabic language without convert the whole interface is there a patch? I already searched about that and i found a file but it's not an application and I don't know how to use it. before that in my old 6.0 i downloaded an application when i install it, it solves the whole situation then i tried it with the 6.5 but the start menu won't open after i installed it so i formatted the ROM.
Click to expand...
Click to collapse
hi, first of all, the backup you have done is probably not ready to be flashed, so whatever you do, dont flash that again or u will brick your phone.
arabic? take a look at this post http://forum.xda-developers.com/showthread.php?t=426281
and finally, i think it will be better if u update ur ipl to 3.10 too.
thanks crapula512 but what you mean with the backup not ready to be flashed? is there any other step ?
zoom-z said:
thanks crapula512 but what you mean with the backup not ready to be flashed? is there any other step ?
Click to expand...
Click to collapse
what he means is....you may brick the device with the backup you just created. so if you wana restore your original...which is the one you have backed up now...you should and can only flash that by making use of USPL or HSPL...search the forum for USPL and HSPL...and you will be given guides...
btw...you really like writing in bold letters eh...kinda makes us feel we are blind...
zoom-z said:
Thank you very much I finally upgraded my elfin to windows mobile 6.5 and it's awesome but i still have one more thing i want to make it read and write Arabic language without convert the whole interface is there a patch? I already searched about that and i found a file but it's not an application and I don't know how to use it. before that in my old 6.0 i downloaded an application when i install it, it solves the whole situation then i tried it with the 6.5 but the start menu won't open after i installed it so i formatted the ROM.
Click to expand...
Click to collapse
Hi Zoom-Z
check this link http://www.ce4arab.com/vb7/showthread.php?t=153346
you will need to create n account nd download the arabic support or you can download it free from HTC after regestering to HTC eclub
after installing the arabic suit enter setup and disable arabic interface and restart
thank you so much crapula
thanks you very much crapula for this advice

rom help please

hi, i cant find an answer so im posting my problem here,
i bought an htc p4350 WING US through ebay, it had an UNICEL splash screen but the ROM wasnt branded with unicel stuff, it was clean, i think it came with htc original rom wm 6.1 or 6.0, i wanted to try those custom roms so i flashed my phone with the wingster instructions, i didnt like them so i wanted to flash back the original htc p4350 WING us but i couldnt because it always give me the wrong vendor id error even though im hardspl, i saw a post wich explains how to downgrade to tmobiles rom by putting some spl, but i havent tried it yet cause i want the original HTCs rom not the tmobiles one, what can i do? :'(
mjlg said:
hi, i cant find an answer so im posting my problem here,
i bought an htc p4350 WING US through ebay, it had an UNICEL splash screen but the ROM wasnt branded with unicel stuff, it was clean, i think it came with htc original rom wm 6.1 or 6.0, i wanted to try those custom roms so i flashed my phone with the wingster instructions, i didnt like them so i wanted to flash back the original htc p4350 WING us but i couldnt because it always give me the wrong vendor id error even though im hardspl, i saw a post wich explains how to downgrade to tmobiles rom by putting some spl, but i havent tried it yet cause i want the original HTCs rom not the tmobiles one, what can i do? :'(
Click to expand...
Click to collapse
Alrighty, put my TribU2U v3 ROM into the HardSPL folder and take out the one that is there. Then run the Rom Update Utility. If that doesn't work, reinstall the three cab files again (that were in the HardSPL folder) and then run the canonyang rom and then run my ROM, I think you'll like my ROM..
Tribulattifather said:
Alrighty, put my TribU2U v3 ROM into the HardSPL folder and take out the one that is there. Then run the Rom Update Utility. If that doesn't work, reinstall the three cab files again (that were in the HardSPL folder) and then run the canonyang rom and then run my ROM, I think you'll like my ROM..
Click to expand...
Click to collapse
thank you for your help man, i really appreciate it, i really do, but the thing is that i dont want custom roms anymore, i took a look to your tribU2U v3 and it looks great, but all i want is to downgrade my HTC P4350 WING US back to its original HTC windows mobile 6.0/6.1 rom without any changes, if you could help me to get rid of the WRONG VENDOR ID and put original HTC rom back i would appreciate it A LOT...
i dont want wm6.5, m2d, touchflo, plugins, programs nor nothing of those stuff, they make the phone buggy and very slow... and dont like'em
i just want the original cuz it comes clean, no visual pimping, no programs added or removed, ultra stable, and because of that the phone works great without errors and very fast... just as i like it
No problem. Thank you for at least trying my Rom.
All you have to do now is insert the original tmoble rom into the folder and take out mine and then run the rom update utility again. Look in my tribu2u thread and I should have the original rom somewhere for you. Just go the the last page and look backward.. Should be 10 to 20 pages backward.. I'd find it for you, buti'm on my phones browser..
Tribulattifather said:
No problem. Thank you for at least trying my Rom.
All you have to do now is insert the original tmoble rom into the folder and take out mine and then run the rom update utility again. Look in my tribu2u thread and I should have the original rom somewhere for you. Just go the the last page and look backward.. Should be 10 to 20 pages backward.. I'd find it for you, buti'm on my phones browser..
Click to expand...
Click to collapse
you welcome. thank you so much your help, after the tmobile rom am i going to be able to flash the original HTC one without the WRONG VENDOR ID error?
mjlg said:
you welcome. thank you so much your help, after the tmobile rom am i going to be able to flash the original HTC one without the WRONG VENDOR ID error?
Click to expand...
Click to collapse
I'm back on the computer for now so I downloaded the original rom setup for you. Here you go:
http://download394.mediafire.com/mtupwwwkm9tg/yj1oz2m3mzm/Wing_RUU_Downgrade_4.26.531.4.exe
wow man, thank you so much, i was looking through you pages but couldn't find it, right now im having my battery at 40% so ill try it in a while to see what happens
mjlg said:
wow man, thank you so much, i was looking through you pages but couldn't find it, right now im having my battery at 40% so ill try it in a while to see what happens
Click to expand...
Click to collapse
Actually, wait one moment; I am going to upload the ROM instead of the setup executable. I'll post back here when I have it uploaded.
why? whats the matter? do i have to use another RUU? i could extract the rom from the executable with 7zip if thats the problem
mjlg said:
why? whats the matter? do i have to use another RUU? i could extract the rom from the executable with 7zip if thats the problem
Click to expand...
Click to collapse
Oh alrighty, lol. Not many users have an intermediate to advanced skill level as you. So I usually try to make everything as easy as possible. But yeah, that is what I was going to do for you - take the nbh file from the exe and upload it.
hahah thanks, yeah i have some good skills, but as im new in flashing WM roms i want to be careful cause i dont want to brick the phone, i used to flash motorola v600 to v3 flex in my time, psp's and those things, i just only need to now if i need toput the rom in the hardspl folder and install again the 3 apps or could i do it with the exe you just gave me?
man thats the tmobile rom not the HTC one :'(
can anyone help me pleaseeeeeeee :'(

My phone model is htc touch2 t3320

Hi Frinds my phone model num is t3320
i want to know that
all touch2 rom is compertabel for my device???????????
if not then how i update my phone rom??????????????/
Difference is that your phone does not have 3G or GPS. No reason why custom Rom's should not work.
So to flash a new Rom back-up your current Rom (see specific thread), apply hard SPL and select the Rom you like.....
Have fun.
Actually, one of the best ROMs I found here is based on your model. This one : New [ROM] [6.5.3_23541_WWE_Radio_3.53.25.20], uploaded by TangerineTractor. It's awesome and I recommend it to you. I'm using it now and it has only minor bugs that you/I can live with and although my model is T3333 after I flashed this ROM, my device says T3320 but everything works well. Try it!
You need to Hard SPL before you can install new ROM
But... there is no Hard SPL for T3320 until now
I already try T3333 hard SPL from Jockey on my T3320... but it not work!
troubletop said:
You need to Hard SPL before you can install new ROM
But... there is no Hard SPL for T3320 until now
I already try T3333 hard SPL from Jockey on my T3320... but it not work!
Click to expand...
Click to collapse
and there is no possibility in near future because i am coordinating with Jockywilson for the HSPL from last 10 DAys and finally failed to use HSPL
HSPL
But the HSPL has worked for me .... well I know its funny but did at the very first go. For my system config details - visit jockey's thread.
troubletop said:
You need to Hard SPL before you can install new ROM
But... there is no Hard SPL for T3320 until now
I already try T3333 hard SPL from Jockey on my T3320... but it not work!
Click to expand...
Click to collapse
Hello All,
As for Addicted2Xda, the HSPL worked for my device (T3320) too & that too in first go.
I dont know much about these things & this is the first device that I own. I verified the procedure & my device in the tri-color screen reads 1.28.Hard on the LHS side. So i believe that HSPL has worked. The only way to confirm that this works is to load a custom ROM(which i am ready to load) but before that I would like to
1. Backup my current ROM (i.e. the original one from HTC so that in event of any issue, i can claim warranty)
2. In case the custom ROM doesnt flash or work, I can load the original one.
Now I, dont know the procedure, requirements, pre-req on how to do it & hence I would like your expert help in this matter. I am ready to do it, its just that i dont know how to do it & I would like to learn.
So is it possible, for someone to post the stepwise procedure to
1. Backup the current ROM.
2. Load the custom ROM.
For our device Model T3320. I also have a reason to specify "our device Model T3320" in every request simply becaue I, have read most of the thread there & found out that there is much misleading information about this device T3320 here. For e.g. in some threads you find that the HSPL is not working in some you find that it works & other things.
My aim (request or what ever you call it) in humble manner, is to make it easy for guys like me (who are new / dumb at this) to use this beautiful forum, in much better manner.
It is possible that, my aim has already been achieved & I am doing something wrong (probably since I have not read all the rules), in which case I am due for a butt-whipping from all the senior members, which i am ready to take, provided, it becomes easy for guys like me to use this forum.
Long post, you all can thrash me for it & i would gladly take the heat, but please consider my reqeust.
Regards,
H.D
Great job HD.... i am also sailing in the same ship with you. T3320 is my first Windows mobile, there are a lot of doubts and confusions with the device.
Most of the terms used in this site are complete jargons to me, it would be great if someone comes forward to enlighten newbies like us.
If you have Hard SPLed your phone, just make sure that your boot loader shows 1.28.Hard (meaning you have successfully HSPLed your device). Luckily you do not need to backup your original ROM as it is already available in the Roll up thread . WWE Asia is your ROM (if you are an Asian that is ).
if your HSPL shows as 1.28.Hard, you can flash any custom ROM you feel like. Just give a few of them a shot, you are bound to like one of them .
Once I flashed my ROM with a custom ROM, never bothered to revert to the Original crap, be it my Vox, my Gene or my Mega.
BTW if you are really interested to know the methods / jargons (well some of them), just pm me and I will be glad to help you - but please note that I have a real job, so it will take some time .
Addicted2xda said:
If you have Hard SPLed your phone, just make sure that your boot loader shows 1.28.Hard (meaning you have successfully HSPLed your device). Luckily you do not need to backup your original ROM as it is already available in the Roll up thread . WWE Asia is your ROM (if you are an Asian that is ).
if your HSPL shows as 1.28.Hard, you can flash any custom ROM you feel like. Just give a few of them a shot, you are bound to like one of them .
Once I flashed my ROM with a custom ROM, never bothered to revert to the Original crap, be it my Vox, my Gene or my Mega.
BTW if you are really interested to know the methods / jargons (well some of them), just pm me and I will be glad to help you - but please note that I have a real job, so it will take some time .
Click to expand...
Click to collapse
Thank you so much Mr.Addicted2xda
1. How can i roll up to original ROM after flashing a new one?
2. Will the warranty be violated if i flash it?
neon7 said:
Thank you so much Mr.Addicted2xda
1. How can i roll up to original ROM after flashing a new one?
2. Will the warranty be violated if i flash it?
Click to expand...
Click to collapse
Once you hardspl your device, your warranty is void.. unless you find a way to put the original spl back on your device... whether you flash a custom ROM or not is immaterial.
But please note that it is my personal opinion, but:
1. I have a Vox for nearly 4 years now... never needed to send it to service centre... only had to change the battery once... that too last year.
2. I had a Gene for more than 1.5 years and sold it to a friend of mine (who used it for 6 months till he lost it)... without a glitch.
3. Using my touch2, flashed it within 1 month without caring for the world (BTW I am not a millionaire... if I was, I would go for TP2 ).
If you want to try new stuff... you have to take the risk.
Best of luck in enjoying your Touch2 right now... or waiting for the warranty to get over
Hey.. Please, can I anyone Help me out and tell me, is there any way flashing ROM through Memory Card.. I have read somewhere on XDA..
I had HTC GENE(P3400i), And I flashed that many times.. But now I'm using HTC Touch2 (T3320 Special Version).. And I want to flash this too..
My Problem is.. Someone told me that after flashing my Touch2 I won't be able to play FM Radio.. Is it TRUE.?
And Please tell me the Procedure by which I can safely Flash my ROM..
First, make HSPL to hack the phone, second choose a ROM from all of the roms in this section, you can put it via data cabel.
mirost1 said:
First, make HSPL to hack the phone, second choose a ROM from all of the roms in this section, you can put it via data cabel.
Click to expand...
Click to collapse
Thanks, But I'm afraid that I have T3320, Can I flash the ROM for T3333.?
Baadshah555 said:
Thanks, But I'm afraid that I have T3320, Can I flash the ROM for T3333.?
Click to expand...
Click to collapse
yes you can.i have the same model and flashed almost
ALL the ROMS available in the ROM section of MEGA
and all work great!!
so go ahead and enjoy yourself.
Baadshah555 said:
Someone told me that after flashing my Touch2 I won't be able to play FM Radio.. Is it TRUE.?
Click to expand...
Click to collapse
Which crackpot told you that ????
Mod. edit: not dev related, moved to general
rakesh_4utoo said:
and there is no possibility in near future because i am coordinating with Jockywilson for the HSPL from last 10 DAys and finally failed to use HSPL
Click to expand...
Click to collapse
I never knew my model was 3320, I used jockey's HSPL, been using custom ROMS from here, all works fine

Windows 6.5 or 7

Can anybody tell me how i can get WM 6.5 or 7 on my HTC Touch Diamond?
Where do i find it and how do i install it? I currentlly have WM 6.1
Thanks!!
Someone would tell you to use the search engine, but im also new on this board.
Windows Mobile 7 is not released until now. Windows Mobile 6.5 or 6.5.5 you will get on this board. Its important that you save your Files from the Phone before you flash it. Its also important to have .Net Framework 3.5 on your PC or you will get an error from RomUpdateUitility in Windows. I had this problem yesterday when i was flashing in WinXP and i tried a new installation. Get the installer from the Microsoft Hommepage: microsoft. com/downloads/details.aspx?displaylang=en&FamilyID=333325fd-ae52-4e35-b531-508d977d32a6
IMPORTANT: You have to erase the space between microsoft and .com. You have to do is at ervery link i posted. Because its not allowed to post links for new members like me and so it works only this way.
Now you need HardSPL, a bootloader, from here: forum.xda-developers. com/attachment.php?attachmentid=93362&d=1213719705
I installed this version yesterday, its unsigned but it works.
Here you have a howto to flash HardSPL, Radio and Rom: modmydiamond. info/index.php?option=com_content&task=category&sectionid=4&id=13&Itemid=26
Then you can flash your Radio to a new Version, get it from here: rapidshare. com/files/353046193/1.17.25.09-SR.rar.html - this is the newest Version i have found, but if you have Problems with it use 1.09. Users on board say thats the best one (but older): megaupload. com/?d=JRJVNC4U
And now what you really want, to flash a new Rom. Its works the same way like HardSPL and Radio flashing. You will get a lot of roms with WM 6.5.x on this board, but you have to look. The are all a little different. Here some examples:
forum.xda-developers. com/showthread.php?t=517300
i dont have use this but i try to flash it today
forum.xda-developers. com/showthread.php?t=635028
is see it now for the first time.
forum.xda-developers. com/showthread.php?t=648771
Finally you will get all this Roms here by searching the board:
forum.xda-developers. com/forumdisplay.php?f=430&order=desc
If there are questions, reply in this thread and i will answer in time.
Hope i could help you and sorry for my bad english
The Diamond is not have the hardware to support 7. Plain and simple. There are countless of ROMS available on the board... http://forum.xda-developers.com/forumdisplay.php?f=430
But becareful as the roms don't work for both GSM and CDMA. Do some research.
These steps that you have to do:
1.Do hard spl 1.93 by olinex. (do MTTY also if you can)
2.I flash more than 5 wm6.5 ROM, This is the best http://forum.xda-developers.com/showthread.php?t=593678.
3.Do hard reset after flashing any ROM. Flashing ROM will DELETE all your data.
Wm 7 has not been released, But if you want wm7 theme, check this out http://www.mobilecustom.fr/forum/index.php/topic,4007.0.html. Good luck:
LostViking said:
Can anybody tell me how i can get WM 6.5 or 7 on my HTC Touch Diamond?
Where do i find it and how do i install it? I currentlly have WM 6.1
Thanks!!
Click to expand...
Click to collapse
Go to HTC Diamond section. U can find everything there.

i need guides...

hi. i just bought a tmobile hd2. some of my phones informations is:
spl-2.10.0000 8g xe
fcc id:nm8pb81120
os version 5.2.21892 (21892.5.0.89)
manila ver 2.5.20121412.2
rom 2.13.531.1 (90963) wwe
redio ver 2.10.50.26
protocol 15.39.50.07u
cpu 8250b
speed 1024mhz
ram 576 mb
flash size 1024mb
i've read lots of articles on this site. i suppose i'll need to instal another rom on my phone. i read a lot but i get little confused. i think first i have to instal HardSPL (forum.xda-developers.com/showthread.php?t=653614) second i have to flash a radio and i can instal a rom. and on this page (forum.xda-developers.com/showthread.php?t=591784) it says i don't need to flash a radio. which means that i just install hardspl and instal this rom... am i right?
can you guys help me what am i suppose to do... and which version of hardspl, radio and rom works well for me?
sory to ask lots of questions but i don't know enough about wm phones ( thanks for guides...
Hi, basic steps are
1. Backup your important data like contacts etc..
2. Its very IMPORTANT that you Flash HardSPL first before flashing any ROM (No worries,it only needs to be done once for you to enjoy subsequent custom ROMs). Version 2.08.HSPL is ok.
3. Browse the threads for a suitable "TMobile HD2 compatible ROM" or visit this link for comfirmed ROMs.
4. Perform a Hard reset after successfully flashing any of the ROMs
5. Enjoy!
i suggest u clear your schedule, get coffee, tea, drink(s) and visit This Link . It contains info and links to all the guides you can possibly need to push you and your device to a higher level. i wouldn't recommend trying android till you are very comfortable with flashing ROMs.
you dont need to worry about the radio just yet, because since you have a tmous phone, it already has a radio that will work with all tmous compatible roms anyway.
Well I'm gonna just say right now I'm not an expert or anything since I'm relatively new too. I'm just trying to help, I would however advise wait for a more experienced person to answer.
First, if you want to flash a ROM follow this guide for the TMOUS HD2's. It goes over how to do it, which ROMs are compatible and all that.
Yes, you do have to get HSPL (except I think there are methods when you don't, though that might just be for the international phones...). But to get HSPL you should probably use this. I don't know if it is the only thing that does it but it, from what I understand, is the most well known. It also keeps you from "bricking" your phone.
From what I understand the only time you have to flash a radio is if the ROM needs it, and the chefs will say if it needs a certain one or list ones that it works with on their ROM page. I think most of them support the radio that comes stock, though don't take my word for it. I would wait for someone else to confirm or re-explain this paragraph because I'm not completely for sure.
As for which ROM is right for you...well only you can answer that. They all are different and different ones have advantages over the others. You just gotta explore a little and see what looks nice. This is the list of ROMs that support the T-Mobile HD2 so stick to it. I don't know how up-to-date it is (meaning I don't know if there are any new ones or not) but stick to those, you can "brick" your phone otherwise.
I would however advise if you're new to WM phones to try out themes first. They are a lot safer and I don't think there is any chance of ruining your phone (the only reason I flashed mine is because I've done it with a different phone before and felt comfortable doing it). Don't do anything you are uncomfortable doing and understand all the risks that go into anything you do to your phone before you do them.
Sorry for the long post, just hope this helps a little.
Edit:
I just got double ninja'd
thaks everybody for all informations. i'm still reading to find out how to install a rom and which one is good. i liked enegy rom gtx themed. i'll take a try. just before doing something to my phone i'm just tring to learn more but i'll do it anyway with a goodway or hardway... i hope everythig goes well...
thanks again...
Muzun28 said:
thaks everybody for all informations. i'm still reading to find out how to install a rom and which one is good. i liked enegy rom gtx themed. i'll take a try. just before doing something to my phone i'm just tring to learn more but i'll do it anyway with a goodway or hardway... i hope everythig goes well...
thanks again...
Click to expand...
Click to collapse
That's d spirit...You'll be amazed @ what the search function on XDA coughs up...Everything'll go well once u stick to d guides and TMobile compatibie ROMs & Radios.
i picked up this rom (forum.xda-developers.com/showthread.php?t=652649) but there is two options. 1) com5(c5) 2)com2(c2). i don't know what it means... and if want to install one of these roms do i have to flash a radio after installing hspl?
and what is the stock rom?
thanks again...
It looks like COM5 and COM2 are just different versions. COM5 offers more options it looks like though, but I'm not sure. Someone else can probably answer that a lot better than me. I am also unable to answer the radio question. Sorry.
As for stock ROM though, that is the ROM that came already on your HD2 when you got it.
Muzun28 said:
i picked up this rom (forum.xda-developers.com/showthread.php?t=652649) but there is two options. 1) com5(c5) 2)com2(c2). i don't know what it means... and if want to install one of these roms do i have to flash a radio after installing hspl?
and what is the stock rom?
thanks again...
Click to expand...
Click to collapse
I see u picked out Kumar's ROM...Click Here for a thread on the definitions and differences between COMs...And No, you won't need to flash a radio after installing HSPL or a custom ROM (Unless you are having problems connecting to your network in which case, u need 2 be careful 2 flash a radio known to work with Tmobile HD2).
Stock ROM is the original/default ROM which TMobile shipped with your device. Follow this guide and you can grab the stock ROM from here. The Stock ROM has to be re-flashed to your device if u ever have to return it to Tmobile as flashing a custom ROM voids your warranty. Grab useful links and watch video tutorials here.
Hope dis helps ya.
thaks voncrane i learned a lot today...
Muzun28 said:
thaks voncrane i learned a lot today...
Click to expand...
Click to collapse
You are welcome, we r all noobs on different levels..

Categories

Resources