Multiple problem in one day....
Here's another problem I am having.
Download WST v4 and tried to run it.
a Program Error occured stating:
"Error adding child script: 6!"
what's that? how did fix this so I can load the prog. greatly appreciative for any help.
install the net framework v2 from here and it will work http://www.microsoft.com/downloads/...cb-4362-4b0d-8edd-aab15c5e04f5&displaylang=en
Thank you! but it's still not working. Same Statement still shows up. Any other suggestion or software out there?
Related
Anyone have the same problem or any thoughts on this one.
I have a Cingular 8525 Phone
Rom version 1.34.502.1
Rom Date 09/21/06
Radio Version 1.16.00.00
Protocol version 32.53.7018.01H
I have loaded Chronos version 2.9.5,
when ever I soft reset my phone I get an error message at startup of
"Cannot execute \Windows\ChronosStartup.exe"
This error message window pops up 2 to 5 times. This will sometime cause my phone to halt in the middle of booting (at the blue Windows 5.0 screen)
I have attached a screen captures of the error message and the about screen from Chronos.
I also tried SpbTime 2.1.2 and get a simluar error message of
"Cannot execute \Windows\SpbTime.exe"
i got this answer from SPB:-
"I would like to apologize for the inconvenience with Spb Time.
Unfortunately, such problem happens on some specific devices. Yet, we've already found a workaround.
Could you please try the following:
- Uninstall Spb Time
- Reinstall it again
- Immediately after that run UnregNotify.exe, which can be downloaded from:
http://www.softspb.com/downloads/time/UnregNotify.zip "
Doesn't to appear to happen any longer (prob i had was "can't execute \windows\spbtimenotify.exe")
Thanks
I'll give it a try and let you know if it fixes my problem.
I was getting the same error of "can't execute \windows\spbtimenotify.exe"
guess I just mis-typed it in my orginal posting.
Thanks.
Ok I unistalled it and reinstalled and ran the UnregNotify.exe. Just soft booted and no error. Working fine now.
Thanks again
I found out that this is caused by the Time Zones setting in the phone settings. If it is checked, it causes this error. Once I unchecked it, the problem went away.
dma1965 said:
I found out that this is caused by the Time Zones setting in the phone settings. If it is checked, it causes this error. Once I unchecked it, the problem went away.
Click to expand...
Click to collapse
I'll try this also.
good infor to have.
Jeff
dma1965 said:
I found out that this is caused by the Time Zones setting in the phone settings. If it is checked, it causes this error. Once I unchecked it, the problem went away.
Click to expand...
Click to collapse
I tried unchecking the Time zone setting. This but it had no effect on the phone with either Spb Time or Activekitchen Chronos.
I will stick with the fix for Spb Time.
Thanks for the help all
cannot execute \windows\spbtimenotify.exe
I had the problem with an error message on my HTC Mogul ...cannot execute \windows\spbtimenotify.exe and search here for help///
thanks for the posting..this link definetely works...
http://www.softspb.com/downloads/time/UnregNotify.zip "
NO MORE ERROR MESSAGE!!!!
im trying to install the new lvsw rom and i'm getting the an error message ''RUUWRAPPER.EXE APPLICATION ERROR'' can someone tell how to make this work
Do you have .net 2.0 installed? If so, have you tried redownloading the file?
gemini7866 said:
im trying to install the new lvsw rom and i'm getting the an error message ''RUUWRAPPER.EXE APPLICATION ERROR'' can someone tell how to make this work
Click to expand...
Click to collapse
see the guide for upgrading to LVSW. This will talk your through it. Read it through word for word and you will be fine.
CRC Error
trying to download the RUUWrapper but when i try to unzip it
it says CRC Error
plzzz help
Hi,
I am getting this "unexpected error" (details in attached screenshots) when I try to run Reperion and the new TV guide. I tried to install CF 3.5 but didn't help. I used to be able to run Reperion, but I can't remember what I did to break it.
Any thoughts?
I have a AT&T Tilt with original rom (details in attached screenshot).
seen this on another program, and the solution was to delete the ".INI" file that was "0kb". It was couse by early termination.
Hope this solves it.
NiteStalker said:
seen this on another program, and the solution was to delete the ".INI" file that was "0kb". It was couse by early termination.
Hope this solves it.
Click to expand...
Click to collapse
Where can I find that file?
Hi Guys!
I'm using SuperMario Lite ROM (June 3) in order to test some usefull sw in my Blackstone in a system clearest as possible. I had tested many apps w/o problems and others that doesn't work or crash ..with consequent HS. Btw this is the first time i have found this problem and before doing the umpteenth "ROM sand-paper" should be intersting to find some solution in the reasonable future situation in which hard reset costs much more consequences.
The problem: I've tested JZ SmarMort v1.5 which has subsequently installed MortScript v4.2. Everything went well until I have decided to uninstall them. I have unistalled (in the order) JZ SmartMort and then MortScripts, btw beeing JZ SmartMort not uninstalling normally I have used (as suggested from SmartSmort) SDK Tools to unistall it completely. Than I have done a soft reset and now..???!
Any software I try to install gives the same result: "Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate." :O
I searched here in the forum but i haven't found solution yet.. anyway these are been my unfruitful attempts:
- Install SDK Certs --> same installation unsuccessful message as for any other progs
- Install Cert_SPCS --> see above
- Install Default Signed DisabledSecurity --> see above
- Install HD Tweak --> see above
- Change/Add:
[HKLM]\Polices\Polices 000010a DWORD: 1 (decimal)
--> nothing changes
I'd like to know Your opinions and suggestions.. anyone who knows how to solve this?
Waitin' for your replay.
NiceOne
(fN)
Try to find sdkcerts.cab on this forum.
FileFixer said:
Try to find sdkcerts.cab on this forum.
Click to expand...
Click to collapse
Hi FileFixer!
Has said in my previous post I've just tried to install SDKCerts.cab taken from here but not solved the problem. In fact, as for any cabs I try to install, I have the same results: "Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate." and then doesn't install.
Anyway THANK YOU very much for your interest and reply.
NiceOne.
fN
Problem solved HERE.
It can be close. THX!
(fN)
Hi..
Tried the latest Android Froyo build on my phone with some interesting results.
I downloaded Froyo, copied the Android folder to my SD card, hit CLRCAD and then Haret. Froyo started booting, but after 4-5 lines all stopped. There was nothing happening after 15-20 min, so i pulled the battery, and started the phone again.
Now i get the message (in Norwegian)
"The file <filename> cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
The problem is that none of the programs installed on the SD-card runs. They all get the above error.
I can not install any programs (reg editors) because i again get the above message. My registry editor that is already installed wont work, and i can not install anything.
I have tried Googling the problem and i've also searched the forums here in XDA. But i have not found anything that actually might work, because they all wants to install something. I can not install anything, and all of my 3'rd party apps doesn't work.
How do i disable the certificate verification without having to install anything or run any 3'rd part apps??
Is there maybe any program that i can run from my Win7 computer??
Thanks for all informing answers..