When i try to connect my HTC Kaiser to active sync on laptop then ppc show me this message:
"to synchronize this device you must install activesync 4.5 or higher on your desktop computer"
The problem is that i have AS4.5 on laptop. I tried to reintall it but this not solve my problem. Any ideas?
do you have xp or vista ?
I have XP...
After fresh install you need to start ActiveSync manual.
Go to Start, then run ActiveSync.
Make sure wcescomm.exe is running.
Problem is solved. It was firewall problem. When i configured rules for rapimgr.exe file then problem goes away. Thans for your help.
Related
I have a problem with synchronising with 2nd PC. I upgraded my machine with the WM2003SE ROM DCS provided. The synchronisation was fine with my PC at home, but the problem arose when I tried to synchronise the machine with my office PC.
The pop up windows says the version is incompatible. The ActiveSync version is 3.71 something. My office PC does not have bluetooth, I have always used to go with IR sync. There is pup-up window in my mobile device asking for 'update ActiveSync of your desktop PC'
Is there anyway to fix it? I did not upgrade my home PC.
Thank you.
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Did you disable Win XP firewall? You have to disable it or any other firewall that may be installed.
If that solves your problem search MS site for how to authorise ActiveSync for your firewall.
Yes, in fact when I reinstalled windows I didn't install Norton because of the firewall. I have also unactivated windows firewall... but no sincronization occurrs
Maybe you could try another USB Cable? Or try to sync using Bluetooth?
Can't sync my S200 either...
Don't think it's cable because it is brand new :'(
Have you tried to upgrade to the latest activesync right after the installation of windows? (found here)
And perhaps some overactive antivirus programs can bug up syncing too sometimes. Did the installation of new hardware go well after you plug in your device?
When you plug in, did nothing happen or was there a small screen saying it was getting information from the phone? If yes, were you able to setup a connection (guest etc) and after that it didn't want to sync?
Got this issue resolved the fault was some tweaking I did... See, I use fixed IP with my router so I disabled the DHCP client service on services.msc... So activesync could't get the right adress from the prophet... Still don't know how I manage to make that assumption about this problem, but gladly I did
Hope this help other people with similar problem...
Same issue
tonimacaya said:
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Click to expand...
Click to collapse
Did you manage to fix your USB problem?
I need some support with the same problem.
Regards,
h
Hi everybody!
I'm having some trouble connecting a pocket pc to my pc. I'm getting the following error message from activesync when I try to establish a partnership connection:
"Cannot verify the version of ActiveSync on your device. A program such
as a firewall may be blocking a port ActiveSync uses to connect to the
device, or you may need to upgrade to a more recent version od
ActiveSync on the PC"
Even if I try to cardle a virtual pocket pc (visual studio) I get the above message.
I'm using activesync 4.5 on a windows xp service pack 3 pc. Installing AS 3.8 would solve the connection/partnership problem but I must use AS 4.5 because Visual Studio does not except older versions of AS.
I've tried so far everything: allowed all ports needed for AS (even deactivated the firewall) - I tried to delete the partnership folders but found out that they haven't even been created by AS.
Even google couldn't really help me: most people get this error message because they have installed a HSDPA usb modem driver from hauwei. But I did not.
does anyone have a solution for this strange problem?
thank you in advance!
I have the same problem. I once got into it through My Computer but since then I've had no luck whatsoever!
You have exactly the same problem?
if you're not using visual studio just install active sync 3.8 as mentioned above. But I found an uggly solution: Cardle you pocket pc - you will get the regular error message. then open the taskmanager and kill the process rapimgr.exe and restart it again (C:\Program Files\Microsoft ActiveSync)
Uncardle and recardle the pocket pc again - you will get a critical error message but it can be ignored. Now you will be able to accees your data.
To deploy your software on pocket pc with visual studio you might restart the remote rocedure call locator (Control panel -> administrative tools -> services)
hope I could help you! but I'm really not satisfied with this solution. I'm open for better ways to solve this problem.
Hi all,
I try to connect my Xda 2 with PC but I getting sync problemss,
I have Microsoft activsync version 4.5 and I getting following message.
“Cannot verify the version of Activesync on your device, a program such as firewall may b blocking a port activesync uses to connect to device, or you may need to upgrade to more recent version of activesync on your pc”
I uninstalled and downloaded version 4.2 and then getting message only “ Microsoft activesync version is not appropriate with my device”
I am a bit fedup now because I try to solve this problem from last few days.
thank you.
Soha
It won't work, if you have Vista installed on your pc.Neither 4.2 not 4.5.
I have windows xp on PC.
You must shut down firewall when connecting or installing programs via ActiveSync.. I used to have the same problem.. Sorry for my english..
first off I'm using windows xp sp2 and ActiveSync 4.5 for my tmus hd2. when my computer starts up i get the error wcescommmgr.exe failed to initialize properly.
i have tried unnstalling repeatedly but still same error and now i can't sync my phone. anyone have a clue here what could be wrong
bumping to get this some more views
any suggestions guys?
just untick the "enable faster connection" button on USB-PC dialog box, and try again.
ihave its not a problem with my phone settings its my computer. on startup i get an error tat says wcescomm.exe failed to initialize properly. it happens even if my phone isn't connected
or can someone tell me another program to use for syncing on win xp
so i suppose noone has had this issue?
Have you tried this:
http://social.answers.microsoft.com...c/thread/06013872-5bec-4d25-8d4b-7a9e23ee8c6a
yeah my computer isn't connected to the internet so i have firewalls turned off. ichecked services in admin tools and found nothing relating to ActiveSync. i really need to sync my phone. mmmy phone gets recognized as disk drive but ActiveSync is faster
ok so i tried tracking down registry entries but it was too confusing. i ado tried reinstalling ActiveSync to my other hard drive and it still does it. wcescomm.exe had failed to initialize properly (0x0000142)
thnx rpx1 it worked for the future its all about missing a profile to active sync.created new system profile aka user account and im good to go