so here we proudly present the HardSPL flash package
well, what this is good for - this enables flashing of custom roms (I try to explain only because I know many Shift owners here don't own other HTC devices).
SSPL and RUU patches have been made mostly by me, HSPL and package compilation have been made mostly by Olipro, so both are branded OliNex.
Please read and follow all instructions very carefully.
this has been tested (thanks thaihugo, et al.), but if you have problems then do let us know in this thread.
also, TO EVERYONE WHO BETA TESTED in the past: please do download this final version. it will flash an updated HardSPL to your device.
prerequisite: "liberated" Shift (i.e. has the usbtool on Snapvue side!).
[size=+1]STEP BY STEP INSTRUCTIONS:[/size]
1. Download the package from attachment in this post and extract the files from the zip somewhere on Vista.
2. Install the EnableRapi.cab file from the zip on Snapvue side. (of course do unzip in Vista first.)
3. Make sure Shift is on AC adapter and that the WMDC in Vista sees the Snapvue side!!! (use usbtool to turn USB on in Snapvue if necessary.)
4. Run the ShiftHardSPLFinal.exe on Vista. if you do not have UAC disabled, then please run it as Administrator!!!
5. It should pop up two cmd windows for a second. then it will pop up a box saying "Processing". at this point please check if Snapvue side went into black screen. if yes, then everything is OK so far, so press OK in the "Processing" messagebox.
6. After some more wait (and two more cmd windows - please allow them to run if Vista asks!), the Romupdateutility will launch automatically. Please press Next and so on, until it flashes the update.
7. The RUU should say success, and should hard reset the device. at this point your Shift has been HardSPL'ed - Congratulations!!!
TroubleShooting:
- if Vista errors out on pput.exe after step 4, make sure you launched the ShiftHardSPLFinal.exe as Administrator: right click on EXE and select "run as Administrator" option.
- if at step 5, you don't have black screen, the device might be asking you to allow to run a program on the Snapvue side. click Yes if prompted!
- if after step 5 the next cmd gets stuck at some USB disabling message, let us know. (it shouldn't get stuck but just in case.)
- if you wish to check it is really HardSPL'd now, use mtty and use info 2 command in it. it should return HTCS00000000something which means it is (fake) supercid and is HardSPL.
NOTE: never use the RUU from this SSPL package for anything else! this is special and is strictly for the HardSPL process.
to just flash ROMs after you installed HardSPL, you can use the original RUU or CustomRUU from this thread: http://forum.xda-developers.com/showthread.php?p=2098895#post2098895
also, first Custom ROM with GPS and with some tweaks/customizations (will also be liberated out of the box!) is to follow sometime this week. along with a radio Security/CID unlocker (patched radio image). then voice and maybe WVGA screen is to follow not much later.
you of course must have this HardSPL installed, or the ROMs will not flash!
enjoy
Let me be the first to say on behalf of us here:
THANK YOU!!!!!!!!!!!!!!!!
ALL HAIL CMONEX!!!!!!!!!!!!!!!!!!
Thanks you and all others in Shift Project
Wouhou !
Thanks !!! great news
I have a Traditional Chinese Version of shift. I followed the instruction to install EnableRapi.cab in WM6 side, then run shiftHardSPLFinal.exe, screen blanked.
On the Vista a CMD pop up said: "USB\ROOT_HUB\4&188A10ED&0 isabled."
then won't continue.
Any help, please?
Nice !! Can't wait to use the built-in GPS on the SnapVue side..
Finally I can run PocketReperion so I can find my shift back if it's stolen.
....voice...to follow later....serious... Cmonex, if you had to put a percentage of chance that we will get Voice working, what would the percentage be ?? 50%-50% ?
Thanks Guys, appreciated!
after done this thing, is it possible to make voice call from Shift? sorry about that question, as I dont have much knowleague about rom and flash
noup. this will allow you to place the hacked rom (the hacked rom is still to be released) that would enable these features... and this without having the phone detect the "hack".
this is a way of telling it..
szjohnwong said:
I have a Traditional Chinese Version of shift. I followed the instruction to install EnableRapi.cab in WM6 side, then run shiftHardSPLFinal.exe, screen blanked.
On the Vista a CMD pop up said: "USB\ROOT_HUB\4&188A10ED&0 isabled."
then won't continue.
Any help, please?
Click to expand...
Click to collapse
oh, chinese shift... is the OS in all chinese? and the WM side?
anyway, that should not be a problem... if it still won't go on, press Ctrl+C to cancel this cmd, another will pop up, cancel that too, then the RUU will pop up. at this point, put vista to hibernate (don't try to shut down for now, it will make it harder to get it working that way). wait a few secs after it hibernated, wake up vista, then go on with the RUU.
btw if this is first time being in bootloader, it might first want to install drivers at this point. let it install them, then feel free to continue in the RUU.
another way to deal with the issue: shut down vista and remove battery. reinstall battery, boot both vista and snapvue, then start the process from step 1 again. battery removal and fresh boot of vista afterwards can help a lot with usb.
lucid said:
Nice !! Can't wait to use the built-in GPS on the SnapVue side..
Finally I can run PocketReperion so I can find my shift back if it's stolen.
....voice...to follow later....serious... Cmonex, if you had to put a percentage of chance that we will get Voice working, what would the percentage be ?? 50%-50% ?
Click to expand...
Click to collapse
hey
IIRC you have the beta hardSPL flashed, yes? I recommend updating it with this final one (only difference is this has overwrite protection while the beta did not - because of that, you can also update the beta one by using CustomRUU and the RUU_Signed.NBH from the final package after it extracts.)
as for voice, chances are a bit better I think.
congratulations Guys Congratulations Its The Only I Had To Say...
I Need Help....
Hello my friends i did the hardspl and everything went well but my question is that why the wm6 became again like before i mean is not liberated again do i have to liberated from the begining again??? because now i cant connect to vista like before with the usb tool....so please tell me.......
Many thanks...
dimisxxx said:
Hello my friends i did the hardspl and everything went well but my question is that why the wm6 became again like before i mean is not liberated again do i have to liberated from the begining again??? because now i cant connect to vista like before with the usb tool....so please tell me.......
Click to expand...
Click to collapse
yes it performs a hard reset.
don't despair, soon you can flash liberated rom and then you can forget about how to do manual liberation
Hello and thanks for SSPL & HardSPL!!
I'm wondering how to build these custom ROMs..?
Are you dumping the ROM from TytnII/Kaiser and edit until the ROM is small enough? Is any Software out there to edit the Filesystem from dumped ROMs?
Many weeks ago i've heard about a ROM that supports GPS - why didn't you release it with the bundle? Any Bugs?
tece said:
Hello and thanks for SSPL & HardSPL!!
I'm wondering how to build these custom ROMs..?
Are you dumping the ROM from TytnII/Kaiser and edit until the ROM is small enough? Is any Software out there to edit the Filesystem from dumped ROMs?
Many weeks ago i've heard about a ROM that supports GPS - why didn't you release it with the bundle? Any Bugs?
Click to expand...
Click to collapse
no, not using a kaiser ROM. but you can dump the ROM from Shift in the same way as Kaiser, I think pof also posted about this before. also we have some HTC rom updates, will try to upload them to crapidshare or something soon.
the current rom base with the GPS has an issue so we are porting the GPS to a newer rom base then release that.
as for rom editor tools, a kaiser kitchen with the rom base changed to a shift rom, will work. i.e. the rom tools from kaiser kitchen are compatible.
Shift display has gone blank
Hi help is needed here, I followed installation instruction and obtained USB\ROOT_HUB\4&188A10ED&0 disabled. I've now got shift working, will try again. Thanks.
Wow, good work!
Are there already any custom Shift ROMs out there..?
feyisetan said:
Hi help is needed here, I followed installation instruction and obtained USB\ROOT_HUB\4&188A10ED&0 disabled. I've now got shift working, will try again. Thanks.
Click to expand...
Click to collapse
try after removing battery, and with freshly booted vista and snapvue.
make sure the WMDC is running with USB enabled in it. that seems to help.
if nothing else helps, then when you get to that disabled message, and it doesn't move after maybe 2 minutes, Ctrl+C, etc., then hibernate vista etc. (as described above).
EDIT: ah I see you added: problem solved. what was the exact way to solve it?
Related
Anybody install Helmi's ROM from Windows Vista?
I have trouble/ When i start bootloder on my BA, PC don't connect to mobile device
And i can't install ROM
I try install activesync, but that is impossible
You can't use RUU on vista with the built in drivers unfortunately.
There is a thread (search for it) and you will find out how to get it working.
Hey guys there is a WIKI!
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardMain
I spend so many hours and nobody follow the wiki
But I am gonna to finish it cause I like the wizard style
Thanks anybody
I complete this task
For any body who need's:
how to upgrade ROM from VISTA
http://forum.xda-developers.com/showthread.php?t=291723
Upgrade is done with the old activesync drivers ... thats why i hate vista, you have to do a lot of stuff to reach your goal
I conferm that the rom upgrade never worked on my pc with Vista. I was forced to use my laptop with Xp. I think someone should make blueangel update utilities compatible with Vista too
Or just keep an XP virtual machine in a safe place
i will post the steps for vista upgrade later, because i am lil busy
xplode?
Have you read the wiki already?) There is nice step by step tutorial - however if you can make some pictures It would be much better!
Follow the instructions in this thread:
http://forum.xda-developers.com/showthread.php?t=291723&highlight=vista
I upgrade my ROMS in Vista using this method and it works every time.
i will made guide with pichtures but it will be after 5-6 hours , because i only have time at night
WM6 with vista
kerio said:
Hey guys there is a WIKI!
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardMain
I spend so many hours and nobody follow the wiki
But I am gonna to finish it cause I like the wizard style
Click to expand...
Click to collapse
Kerio, your wiki is very good, but my device only be in bootloader mode, and, although the vista recognize my device, the program that i'm using do not run the instaler. It be only in the first screen and do not able to get informations about my device.
My device is only with serial and v 2.08 in the screen!!!!
Thanks,
David Neto
davidc.neto said:
Kerio, your wiki is very good, but my device only be in bootloader mode, and, although the vista recognize my device, the program that i'm using do not run the instaler. It be only in the first screen and do not able to get informations about my device.
My device is only with serial and v 2.08 in the screen!!!!
Thanks,
David Neto
Click to expand...
Click to collapse
Try to remove SD from your device b4 do the flashing.
Thats right SD card should be removed before flash (device may not go into "USB" mode when "cradled")
However I have made PICTURES and added them to the wiki (they are quite big and it doesnt look very well) but will improve it later
ahttp://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4_Vista_Pic
VERY IMPORTANT TO NOTE:
This custom ROM is built for installation onto both the ELFs and ELFins.
DO NOT FLASH IT TO ANY OTHER DEVICES! I will not be responsible for any damage to your device.
FOR FIRST TIME CUSTOM ROM UPGRADERS:
1. Copy the Cert_SPCS.CAB and EnableRapi.CAB from the zip folder to your device's Storage Card.
2. Install the two cabs to your Device memory and do a soft reset.
3. Restart your PC or laptop (Optional)
USING THE INTEGRATED ROM UPDATE UTILITY WITH USPL CID UNLOCKER:
(ATTENTION: REMOVE YOUR 4GB, 6GB or 8GB mircoSDHC CARD WHEN FLASHING THIS ROM!)
1. Turn off your computer's Anti-Virus software if you can.
2. Activesync your device to your PC using USB port.
3. When the connection is completed (after synchronisation), double-click on [START] batch file to begin the integrated ROM Updating Utility.
4. Now follow closely the instructions that appear on the computer screen.
5. Press [ENTER] to accept at each prompt to continue the process.
6. After Step 2/3 of USPL CID Unlocker, the device screen will turns "blank white" and your activesync icon gray (in Windows XP only).
Congratulations! You have successfully CID unlocked your device. Press [ENTER] to proceed NOW!
(NB: If you failed to see the "blank white" screen, then your CID unlocking has failed.
Restart your installation process from Step No.1)
7. Your device will now proceed to update your rom. Select and hit [NEXT] at each prompt to continue.
8. When the rom updating is completed at 100%, your device will restart automatically.
9. Congratz! You have successfully upgraded to a new rom.
Enjoy!
__________________________________________________________________________________________________
I did this had no problems with my htc elf/elfin/touch over the moon with it!!!
REMEMBER: all of your installed applications will be swiped of with this ROM.
Also have fun with your upgraded windows mobile 6.1 HTC ELF!!!
__________________________________________________________________________________________________
Whiplash1995.
Cheers
WM6.1
for
ELF
__________________________________________________________________________________________________
please tell me if there is any problems post a reply...
forgot to menchion download the full thing at > http://thepiratebay.org/torrent/4277382/Windows_Mobile_6.1__en_for_HTC_Touch
DO NOT BE A NOOB FOLOW THE ON SCREEN INSTRUCTIONS!!!!!!!!!!
__________________________________________________________________________________________________
'Start' batch file does nothing.
Tried opening it directly from a command prompt, but still nothing, except it opens another dos box.
Thoughts ?
The 'start' batch file fails because the first command is 'cd RUU'. but there is not a folder called RUU.
Then it tries to rename two files which also do not exist. Hence it never actually arrives at the exe file to unlock & install the ROM.
Can this work if you simply run the exe file without renaming & changing folders ?
Hi, and thanks for that script...
The .bat works well for me but while updating the rom, I've got an 270 error... 'The images files is corrupted please check your update utility'
does any one had the same issue on his phone? Do you think I just need to download it again? (concidering that the zip file uncompressed normaly, I assume it works well...)
Thanks for your answers...
upgrading MDA Touch
please i need your Help.
I have download the" touch essential V3.5 Manilla" on my PC. But i don´t know how to send it to my MDA.
Activsyc is working.
Where kann i fine the cert_CAB?
I have also unpacked the V3.5 manilla, but there is no way to run it in the MDA how should i do this.
many thanks
My 2 cents...
If I were you I wouldn't rely on a torrent posted by a junior member (age 12) and rather download the ROM posted by Football on Rapidshare => See his post HERE <=.
I've been using it from day 1 without any problem...
gruikdadude...
gruikdadude... I understand were you are coming from but I have been very carefull on what i look for and actually this torrent file was uploaded by someone on xda developers so i am saying the update worked fine for me so why shouldnt it for you so before you start criticising a me for posting something that is just to assure htc touch owners that there is a reliable WM6.1 upgrade is there anything wrong with this......... NO!!! so before you criticise think twice !!!bell end!!!
__________________________________________________ ________________________________________________
Whiplash1995.
Cheers
WM6.1
for
ELF
________________________________________________ __________________________________________________
r there any direct download links?
as i prefer not to download through torrents...torrents downloading over here sux...
whiplash1995 said:
so before you criticise think twice !!!bell end!!!
Click to expand...
Click to collapse
Not criticizing you at all: just warning xda members that downloading any posted ROM can be harmful for their PPC...
EOF
Can you plz. give us link for zip file instead of the ttornet one
thanks in advance
can you tell me the diffrences between this rom and the original 6,1 rom? i see no manilla2d, but more differences?
hi i tried the whole procedure , but i get the ERROR[270]: Image file is currupted, can anyone help regarding this error, how to get the uncurrupted version?
Since this rom is giving a lot of people problems, why not just use one of the verified good roms from the Elf Upgrading subforum?
hi freands
can i use wm 6.5.5 in my htc viva qvga ? if yes then where i get ?
mehulkarate said:
hi freands
can i use wm 6.5.5 in my htc viva qvga ? if yes then where i get ?
Click to expand...
Click to collapse
I assume that you meant 6.5.3, first of all why did you opened new thread ? the whole opal forum is full of roms then also you opened a new thread.
Anyway here are some wm 6.5.3 roms
http://forum.xda-developers.com/showthread.php?t=571420
http://forum.xda-developers.com/showthread.php?t=619336
There are more but please use search function before posting a new thread.
6.5.3 build 28008 lite rom not working
hi jagan2:
i flashed my opal with ur rom ( Windows phone 6.5.3 build 28008 lite rom) but after started phone the volume key of it not work and memory card not open in file explorer, i taring but it was not ok
plzzzzzzzz help bcos i like very much ur rom ,its very nice
mehulkarate said:
hi jagan2:
i flashed my opal with ur rom ( Windows phone 6.5.3 build 28008 lite rom) but after started phone the volume key of it not work and memory card not open in file explorer, i taring but it was not ok
plzzzzzzzz help bcos i like very much ur rom ,its very nice
Click to expand...
Click to collapse
Iam extremely sorry bro it has a bug that i also know. So i think you need to change your rom until i fix that.
I suggest you to try nguoc rom although it will give less internal storage and less free ram still for beginner its perfect.
need ur help bro
mehulkarate said:
hi jagan2:
i flashed my opal with ur rom ( Windows phone 6.5.3 build 28008 lite rom) but after started phone the volume key of it not work and memory card not open in file explorer, i taring but it was not ok
plzzzzzzzz help bcos i like very much ur rom ,its very nice
Click to expand...
Click to collapse
====>>
hi bro,
today i got my new cell htc viva with windows 6.1 pro.
where did and how can i upgrade to windows 6.5, can you please guide me step by step, i tried to search in this website (XDA) but did not got any perfect solution ...
i download few rom but got error as 270 (file/rom/image currupted )
did not got solution, help needed, please help me
Thanks
Bhupes
spl change
well i made this a while ago, and finally got around to get it fully tested and release it.
this HardSPL is based on version 1.26 SPL. and is version 2 (2.00.cmon). also i *think* this one will not hard reset the phone
it's for any OPAL***** modelid now,
thanks to wlinsong and PhamQuang for testing
instructions:
0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx
1) download Hard-SPL package from attachment, extract to an empty folder (Opal_HardSPL_v2_0.zip).
2) you must have the phone synced with your PC, i.e. device must be in Windows Mobile!
3) run Opal_HardSPL_v2.exe.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) device should go to a grey screen
6) go on with RUU, Hard-SPL flashes, device automatically reboots, job done.
7 ) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 2.00.cmon
+1: if the screen won't go to grey mode (SSPL), then try manually entering SSPL by using the Opal-SSPL-Manual.zip - run the EXE on the phone then when it went to grey screen, run the HardSPL exe on PC and flash.
finally, donations are always appreciated to the "To Cmonex" link in my signature
now, enjoy the hardspl and cooked roms
UPDATE: How to flash stock SPL back for warranty purposes - please use this only if you need to return device for repair!
steps:
0. first flash entire stock ROM, then after that you can flash stock SPL as *last step*. do not reverse this flashing order please
1. get the RUU_Signed.NBH file from attachment (opalstockspl126.zip (185.3 KB))
2. run hardspl package from attachment (Opal_HardSPL_v2_0.zip)
3. *after* Opal HardSPL EXE extracts files, replace extracted RUU_Signed.NBH with the one from opalstockspl126.zip i.e. when asked to overwrite, say Yes, if it doesn't ask, then you are trying to copy it before running the HardSPL EXE, which is the wrong order.
4. flash just like you flashed HardSPL (see original instructions above)
5. device reboots, you can now check if it says 1.26.0000 or still 1.26.cmon or 2.02.cmon, in the latter case you did something wrong, it has to show 1.26.0000.
Attached Files
Opal-SSPL-Manual.zip (326.4 KB, 5194 views)
opalstockspl126.zip (185.3 KB, 2930 views)
Opal_HardSPL_v2_0.zip (1.03 MB, 5829 views)
download from this link http://forum.xda-developers.com/showthread.php?t=446446
Hi to all.
I need a help from you.
I have my HTC Shift and I need to make it works as phone and Gps.
I made an upgrade of S.O. from VISTA to Windows 7 Starter Edition
question are:
1. Can I upgrade a Rom Cooked with phone and Gps on it also now that I made first upgrade to Windows 7 Or I must get it back to Windows Vista to do this.
2. I'm Italian, can I wait for any Italian version Rom or it's just the same
3. I liberated my HTC (Modaco...) but when I use the usbtool I cannot attach to Vista, this is because I put first Windows 7?
4. Which is more suitable for me which ROM COOKED you suggest me to flash and for flash I must use utility downloaded from HTC : htcflash.exe ?
5. What is HardSPL, Do I need this for flashing a cooked rom?
Many many thanks for any possible answer to me.
I need to use it as a navigator with Garmin so I need to have GPS works and Phone also.
Sulilvan2002
sullivan2002 said:
Hi to all.
I need a help from you.
I have my HTC Shift and I need to make it works as phone and Gps.
I made an upgrade of S.O. from VISTA to Windows 7 Starter Edition
question are:
1. Can I upgrade a Rom Cooked with phone and Gps on it also now that I made first upgrade to Windows 7 Or I must get it back to Windows Vista to do this.
2. I'm Italian, can I wait for any Italian version Rom or it's just the same
3. I liberated my HTC (Modaco...) but when I use the usbtool I cannot attach to Vista, this is because I put first Windows 7?
4. Which is more suitable for me which ROM COOKED you suggest me to flash and for flash I must use utility downloaded from HTC : htcflash.exe ?
5. What is HardSPL, Do I need this for flashing a cooked rom?
Many many thanks for any possible answer to me.
I need to use it as a navigator with Garmin so I need to have GPS works and Phone also.
Sulilvan2002
Click to expand...
Click to collapse
Hi sullivan2002!
Just trying to answer you questions as good as I can.
1. I guess so (I use XP), but you have to make sure by reading the appropriate threads. I think you have to leave the wifi and BT connections ON before abandoning Vista, but I also recall that there is a workaround that in case you did not do it.
2. It is up to you, but I think that if there is no Italian ROM version by now there are very little chances to have any from now on. There is no further development on this forum, the developers are just not interested in Shift any more. But I think that there is the original Italian ROM somewhere here, if that's enough for you.
3. I think so, but I have no experience with Win7. Did you install the Shift Control Center in Win7?
4. I use i00 which keeps the appearance of the initial HTC snapview screen and also is using reduced resources. But you might want to try several ROMs, once HardSPL is it fairly easy to replace the ROMs. I also enjoyed Thaihugo's Shift custom ROM "age of reason" and "age of beauty", which are very good. But there are also other very good ROMs that I didn't try. Anyway, look for the appropriate radio rom to match the selected coocked rom.
- Are you aware that there is no solution to use the phone with the headphones, but only with the speaker?
- Are you also aware that you can use the GPS only in a mixed way, the GPS module from the WinMobile side with the programs and maps installed on the Win7 side? This is because there is no access from the WinMobile side to the SD card to host the maps.
- Are you aware that there is no access from the WinMobile side to wifi or BT?
5. Definitely you have to use HardSPL. I did it before leaving Vista, but I am not sure it is compulsory to do it under Vista. But you have to do it, otherwise there are very good chances to brick the Shift.
Here are some hints, but you'll have to do some good reading on this forum:
How to flash ROM
(=copy/paste selections from this forum, not my merit)
"First of all you have to:
• liberate the Shift
• HardSPL the system.
Once you HardSPL this, then you have to
• download CustomRUU (CustomRUU.exe utility) from this Shift forum.
• Run CustomRUU as admin on Vista to load nbh file.
Make sure this RUU_Signed.nbh is in the same folder where CustomRUU.exe.
For beginers: first install HardSPL (read forum for the proper link) then the radio, then the rom.
To install radio or rom, use the main program and run as administrator
- for radio, it is "romupdateutility.exe"
- for rom, it's customruu.exe
The 1.58 radio was the original radio for the european shifts. It will make a hissing sound problem on a rom that was made for the 1.27 radios. "
Please do the appropriate readings of the forum, your Shift is at stake here.
Good luck!
thanks for answering
Hi
first of all thanks for answering me.
I would like to ask you
You said
Are you aware that there is no solution to use the phone with the headphones, but only with the speaker?
but ONLY PHONE or also Music, MP3, Films... Cause I would like to bring with me in my car and sometimes use the JACK PLUG to use with my car amplifier in order to hear music mp3... from that.
For me is just enough to install GARMIN or iGO 8 on windows 7 and run them. So maps are on hd. But I Can't understand why if I unlock Snapview... and I make work SD, I Can't use SD for putting maps and make Windows Mobile recognize it.
I understood I have to go back to VISTA and to to all I made for unlocking and after to reinstall Windows 7 starter edition (is more light and fast and I can sell it, htc better when I will not use it more in the future...)
for HardSPL sincerly I didn't understand how to use it. I thought after unlock (modaco... usbtool...) I could put exe file from htc to flash rom and use cooked rom i00 instead of htc new firmware but maybe I have to do somthing with HardSPL.
As I understood from you I can use Winmobile only for sms email and phone (if will works) and all things do better from Windows side.... gps....maps... music.... films...
Ok thanks dear friend. I see you are in Bucharest. I went in Bucharest some years ago. Am fost la Bucuresti in trecut si am vezut tot tara ta.
Ceau si o zi buna.
sullivan2002
sullivan2002 said:
Hi
first of all thanks for answering me.
Click to expand...
Click to collapse
You are welcome!
sullivan2002 said:
Are you aware that there is no solution to use the phone with the headphones, but only with the speaker?
but ONLY PHONE or also Music, MP3, Films... Cause I would like to bring with me in my car and sometimes use the JACK PLUG to use with my car amplifier in order to hear music mp3... from that.
Click to expand...
Click to collapse
Only phone, there were long debates and high hopes on the forum a few years ago in the time of the Shift Project.
About Music, MP3, Films... I never tried them on the wm side, I guess there is no problem with using the headphones or an external amplifier. BUT there is a reason stopping you to use large files because the SD card does not work on wm side, therefore you cannot access your files.
sullivan2002 said:
For me is just enough to install GARMIN or iGO 8 on windows 7 and run them. So maps are on hd. But I Can't understand why if I unlock Snapview... and I make work SD, I Can't use SD for putting maps and make Windows Mobile recognize it.
Click to expand...
Click to collapse
The HTC Shift is an unfinished HTC job/crippled product on the winmob side, so it doesn't work with wifi, BT or SD card, only with the 3G modem. You can also sync wm via internal usb with the w7 side.
USB and Ethernet are accessible from outside only to the w7 part and not at all to the wm part.
sullivan2002 said:
I understood I have to go back to VISTA and to to all I made for unlocking and after to reinstall Windows 7 starter edition (is more light and fast and I can sell it, htc better when I will not use it more in the future...).
Click to expand...
Click to collapse
Not necessarily, maybe you are lucky. Try first (re)installing the Shift Control Center (shagctrl) on the W7 part. Then start it from top-right button and see if you have access to wifi, BT, 3G, etc.
sullivan2002 said:
for HardSPL sincerly I didn't understand how to use it. I thought after unlock (modaco... usbtool...) I could put exe file from htc to flash rom and use cooked rom i00 instead of htc new firmware but maybe I have to do somthing with HardSPL.
Click to expand...
Click to collapse
You have to HardSPL first before using a coocked rom, otherwise you will brick your Shift wm. You cannot just drop a new rom, you have to enter the bootloader mode first with HardSPL.
With "modaco" you are just liberating your Shift, i.e. unblocking the SnapVue and turning it into the true Windows Mobile 6.0 to allow cab installs. It was said that HTC has chosen this solution (SnapView) to avoid paying the WM license, but I would say also to hide the crippled functionality of the hardware. Be aware of the licence issue if you open the Windows Mobile 6.0, please do some more reading.
If you decide to go for a coocked rom, you have to enter and prepare the bootloader mode, which is initiated with ecshift.exe from W7 without WM running at all. I don't remember exactly from one year ago, but I think that hard-resetting the winmob side and reconnecting the two operating systems via usb are necessary steps preceeding HardSPL. SPL probably stands for "System Program Loader". To HardSPL you have to install the EnableRapi.cab file on winmob side and run ShiftHardSPLFinal.exe on Vista side, which will put the special Romupdateutility (RUU). To flash ROMs after you installed HardSPL you can use the original RUU or CustomRUU.
It is difficult to explain in further details, I am not an expert, but look on this forum for the thread called "Step by step guide to liberate > hard spl > flash Rom" and follow carefully all the instructions there. You have to do a lot of reading, pay good attention to the instructions and hints given by the seniors on this forum. If you have no experience then this is no half an hour job, including the readings you have to spent many hours for being successful in using a coocked rom. But it pays off.
sullivan2002 said:
As I understood from you I can use Winmobile only for sms email and phone (if will works) and all things do better from Windows side.... gps....maps... music.... films....
Click to expand...
Click to collapse
Yes, but for GPS you have to go in a mixed way because of the reduced RAM of wm and of the SD card issues: use the built-in GPS antenna and receiver in the winmob side and install the program and the maps on W7 side; the two sides communicate through the internal usb bus, you have to trigger this connection with USB Tool. Similar for synchronizing the two parts.
GPS is working only with some coocked roms.
sullivan2002 said:
Ok thanks dear friend. I see you are in Bucharest. I went in Bucharest some years ago. Am fost la Bucuresti in trecut si am vezut tot tara ta.
Ceau si o zi buna. sullivan2002
Click to expand...
Click to collapse
Nice to hear that, you are doing excellent in Romanian, congratulations. I hope that you enjoyed the country and the people. Was it as tourist or was it for business?
All the best!
HI my friend
At first for Tourist 1998.. and then business but only for 1 year.
I enjoyed always I came in your country, Romania is a very green and has a beautiful nature and countryside and people were more friendly than here in Italy. But for people, italian people is hard to understand this, due of bad facts and news from some who did mistakes here (more are zigans here who make troubles and they are similated to romanian). Of course here there are a lot of romanians and no all could have a suitable job cause also for crisis that hit our country. I went last year in Cluj for a week and also I took a car a white Dacia like the police car and I made about 1000km to go to Timisoara and return to cluj cause I pay about nothing for airplane.
You said:
Not necessarily, maybe you are lucky. Try first (re)installing the Shift Control Center (shagctrl) on the W7 part. Then start it from top-right button and see if you have access to wifi, BT, 3G, etc.
I can see shift Control Center (shagctrl) from Windows 7 side but what I can do? Why I'm lucky if I could see Shagctrl open? I can't still open SD card from WM also when I click on USBTOOL... Maybe I need to do this in order to put here in my SD, HardSpl, and New i00 rom to be cooked or no? is another way to flash it? Can I connect via Activesync and do that?
Ok I will look on the forum Step by step guide to liberate and try to do it today, but first I have to put on my WM a software called pimbackup.... and SMSexport in order to backup all my sms calls...
Thank
Sullivan
sullivan2002 said:
HI my friend
At first for Tourist 1998.. and then business but only for 1 year.......
Click to expand...
Click to collapse
Hi Sullivan!
Nice to hear about your travels in Romania. Yes, the lanscape in beautiful and most of the people are very friendly. There are good Romanians and bad Romanians, just like worldwide there are good people and bad people.
But not many of the other people make the distinction or are willing to make it.
This is part of the show of this world......
sullivan2002 said:
I can see shift Control Center (shagctrl) from Windows 7 side but what I can do? Why I'm lucky if I could see Shagctrl open?
Click to expand...
Click to collapse
No, you are lucky if, by opening the ShagControl, you can then activate wifi and BT. If not, try reinstalling the ShagControl, it shouldn't take long. If not, you have to look here on the forum for a work-around before going back to Vista.
Btw, did you erase completely the Vista recovery partition or is it still there and you can put Vista back in 10 minutes with the F3 thing?
If you have no other choice then going back to Vista, I suggest to make a back-up image of the W7 OS that you can restore later, it will save you a lot of time.
Regarding the W7 correct installation, I suggest to read the posts of RSargeant, they are very good and he speaks also about the communication part, if I recall correctly.
sullivan2002 said:
I can't still open SD card from WM also when I click on USBTOOL...
Click to expand...
Click to collapse
That's correct. You did not get my message: you cannot open the SD card from the WinMob at all. Not even with a coocked rom.
This is a still open challenge on this forum. It appears theoretically possible, but nobody managed to do it, it is about both hardware and software (drivers and not only) changes.
sullivan2002 said:
Ok I will look on the forum Step by step guide to liberate and try to do it today, but first I have to put on my WM a software called pimbackup.... and SMSexport in order to backup all my sms calls...
Click to expand...
Click to collapse
Yes, you are right, save all your personnal data first, it will completely washed out.
Good luck!
OK
Hi my friend.
Ok yesterday I made some changes to my HTC SHIFT X9500
I put hardspl, it was not so easy cause I made it 3 times, always system said me something like: I cannot open port.... and didn't want to start but at the end after 2 times and after I reset my device...it did fortunately.
I could put a cooked rom: i00
sincerly I'm not so satisfied 100% cause resolution...and other things but sure better from the previous
I wanted to put the 6.5 Rome for htc shift from CLIO 28/3/2010 but I cant download it:
http://romeos.monx.biz/index.php?option=com_content&view=article&id=56&Itemid=93
it's very nice but nothing to do, link is out, maybe I have to pay something to the author to download it.
Now I have inside i00 ROM Cooked but If I want to put another ROM Cooked or the original Italian Rom I have to put again HARDSPL or not? I used one time hardspl is it enough?
AFTER I upgrade Windows Visto to Windows 7 Starter Edition
I would like to ask you this:
After I upgrade to Windows 7 and I go to WM side, I cannot Attach it !!!
Attach to Vista and when I go to Windows 7 side I cannot see Pocket PC
How I can do? Is it possible or I have to remain with Vista? Oh Damn !
MY objective is to put GARMIN PC to my HTC SHIFT and use it as navigation and Mp3 device connected to my Car Radio Amplifier.
Ceau
Sullivan2002
sullivan2002 said:
Hi my friend.
Now I have inside i00 ROM Cooked but If I want to put another ROM Cooked or the original Italian Rom I have to put again HARDSPL or not? I used one time hardspl is it enough?
Click to expand...
Click to collapse
Yes, once is enough, but only until loading again an original rom (I think)! May be we get also someone else on this forum to confirm it (that after loading the original rom is necessary to HardSPL again).
sullivan2002 said:
After I upgrade to Windows 7 and I go to WM side, I cannot Attach it !!!
Attach to Vista and when I go to Windows 7 side I cannot see Pocket PC
How I can do? Is it possible or I have to remain with Vista? Oh Damn !
Click to expand...
Click to collapse
Hey, you're not stuck with Vista. Did you follow the recommended threads to install Win7? Watch carefully the drivers. Ah, I think you have to do the installation of Win7 in Vista compatibility mode and as administrator. Can't tell you more, I use XP, remember?
sullivan2002 said:
MY objective is to put GARMIN PC to my HTC SHIFT and use it as navigation and Mp3 device connected to my Car Radio Amplifier.
Click to expand...
Click to collapse
You'll manage that, cannot be that difficult! Once the usb connection done, there should be no further problem.
Good luck!
ok
thanks
I understood about hardspl, I think so to put again if I want to put an original rom and after a cooked one.
For the rest. Now All is ok, also USBTOOL.. works I installed GPSBLUE... and GPSGATE in WM side and W7 side. In WM side I output on Activesync and in W7 side Input on Activesync.. but GARMIN Doesn't reconize GPS.
Ok about the drivers for W7, all went well about installing in Vista Compatibility mode and Administrator mode.
I have installed GARMIN 5...XXX.30 and can see only Bluetooth GPS or USB GPS, I think I must download somewhere a version like 5....xxx.70, I heard somewhere that was written that only this version can reconize GPS from Activesync or TCP/IP
Sullivan2002
sullivan2002 said:
ok
thanks
I understood about hardspl, I think so to put again if I want to put an original rom and after a cooked one.
For the rest. Now All is ok, also USBTOOL.. works I installed GPSBLUE... and GPSGATE in WM side and W7 side. In WM side I output on Activesync and in W7 side Input on Activesync.. but GARMIN Doesn't reconize GPS.
Ok about the drivers for W7, all went well about installing in Vista Compatibility mode and Administrator mode.
I have installed GARMIN 5...XXX.30 and can see only Bluetooth GPS or USB GPS, I think I must download somewhere a version like 5....xxx.70, I heard somewhere that was written that only this version can reconize GPS from Activesync or TCP/IP
Sullivan2002
Click to expand...
Click to collapse
Hi Sullivan2002,
After checking with someone I know, on his HTC Shift there is the following software installed:
- On the WinMob side - PPC GPS Router 2.0.0.0 (HTC 2005) to enable the GPS port and HTC GPS Tool v1.2.1.26 to do the reception.
- On the W7 side there are Franson GPS Gate 2.6, Garmin Mobile PC v 5.00.70g and GMap Catcher.
Unfortunately I can't tell you more, I'm not using Shift with GPS. Maybe in the future.
Anyway, do a search on this forum, I recall there was a thread on Gramin.
Good luck!
ok thanks a lot
I will try
sullivan2002
Hello people!
I've been working with windows 7 7592 on my HTC HD2 for some time now and i really want to keep windows 7. I can't seem to find a way to update from 7592 to 7720, does anyone know of any ?
Leo
you'll have to download first the wanted update cab from xbosmod/sylvester's page and send it to your phone with the help of update cab sender from the same guys
Hey, thanx for the quick reply florin_stann!
I tried googleling xbosmod/sylvester but i found nothing, can you be more specific on were i should go to download the rom?
which ROM you have? author (which cooker not version)
only Yuki ROM can update with CAB files.... for other ROM's you must flashing from beginning
Hmm, all i see here is OS Version: 7592.WM7_Main(mojobld).20110308-1514.
Does that help?
Lewnidas said:
Hmm, all i see here is OS Version: 7592.WM7_Main(mojobld).20110308-1514.
Does that help?
Click to expand...
Click to collapse
no... but is possible this is Yuki BTTF ROM?
Can't say for sure m8.. any way you know i can find out?
Any way to figure out who cooked my rom?
I installed windows 7 on my htc hd2 some time ago, i think it was the first Mango release, 7592. Any way i can find out who cooked that specific rom i used so i can update ?
Thank you in advance,
Leo
Lewnidas said:
I installed windows 7 on my htc hd2 some time ago, i think it was the first Mango release, 7592. Any way i can find out who cooked that specific rom i used so i can update ?
Thank you in advance,
Leo
Click to expand...
Click to collapse
did you can send CAB files to phone? if you can, this is Yuki (BTTF) ROM.... but maybe is better to try change to other ROM.... only one warning... if your ROM is Yuki, then your sdcard is locked... you must first unlock it with sending unlock CAB file to phone and then format it before install new ROM....
i recommended this ROM
http://forum.xda-developers.com/showthread.php?t=1356833
I could send cab files through a Microsoft developer tool, and my sdcard is not locked.
I will try the rom you recommended, thatk you for the reply dxdy!
Will let you know if i come up with results.
Leo
Why is everything so complicated!!
Ok my friend, i allready have Magldr v1.13 and windows 7592.
On your tutorial you write:
- when you turn on phone press and hold power button to boot direct to MAGLDR:
* go to 5. USB Flasher and run ENG_DWI.exe to flash ROM (or TR_DWI.exe. ENG is installer in English, TR is Turkish)
- after flashing process done, and when show Main screen with Tiles, do hard reset (Settings - About - reset my phone)
- you are done... ignore next steps
Got two questions on that.
I downloaded 3_HD2_Pdaimatejam_Rom_Wp7.5_mango_7.10.8107.79_v7.3.rar but there's no ENG_DWI.exe in the file..
How does it install windows 7 8107 just by hard resetting ?
I feel like a pain in the neck, sorry for that, if things get more complicated i'll try to find another way or just stay with 7592.
I flashed sdcard, went to usb mode but DWI.exe wont regognise the usb connection..
Lewnidas said:
I flashed sdcard, went to usb mode but DWI.exe wont regognise the usb connection..
Click to expand...
Click to collapse
one time file is named ENG_DWI.exe.... totally not important how is named, DWI.exe or ENG_DWI.exe.. is same file..
did in USB mode in MAGLDR recognize USB?
Dxdy!!
It worked! Running on windows 7 8107!
Thank you for your tips, be well
Leo
Dude.. I've had this phone for what.. 3 years now?
It still feels new!
Everything works.. marketplace works, speech works, everything.
Only thing there is no alphabet with the apps, but that's fine, i'm sure i'll find something somewhere.
Thanx again dxdy!
Lewnidas said:
Only thing there is no alphabet with the apps, but that's fine, i'm sure i'll find something somewhere.
Thanx again dxdy!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=22260479&postcount=2185