Hi all! Just get Pharos (some days ago), first PDA for me.
I've tried to get work Bluetooth PAN, but unfortunally it works for ICS only, Pharos works as NAP. But I need to connect it as PANU to PC that is NAP.
As I read here and in some another forums this is a "feature" of a Microsoft BT stack. MS guys knows best what we need?
There are some solution for another devices that replace Microsoft BT stack with Broadcom or Bluesoleil one.
I've tried Bluesoleil, but it can't see bluetooth adapter on my Pharos, and there were no way to return for MS instead of Hard reset.
Has anyone another solution for it?
Related
I have a Sony Vaio which has built in bluetooth. When I pair the XDA2 with it, it can not see any serial profile on the XDA2. Also the BT implementation of Microsoft on the XDA2 does not do much as well. The pairing of the machines from XDA2 gives you the message that it's ready for activesync via bluetooth but that's BS. When you choose activesync via bluetooth from the XDA2, my VAIO shows an instant try of serial connection between the devices but it does not stay there.
The bluetooth implementation on the VAIO is also Microsoft BT stack and it sees the XDA2 as a DUN device, which installs a modem at port 10 to use the XDA2 as a modem. So some part of this works, except the activesync.
Any help would be appreciated.
Also, I have contacted NAVMAN GPS in Europe and they have confirmed that they just sent an XDA2 to New Zealand to their developers to find a solution for the strange pairing problem (NAVMAN GPS only accepts "NAVMAN" as the pairing PIN but you can only enter numbers at the XDA2 pairing software)
I have exactly the same problem as you with my Sony VAIO Z1 SP laptop. I have posted a separate thread but so far no-one has been able to get my bluetooth activesync working. Have you had any luck yet?
No not yet, I've downloaded sony's updates for bluetooth from www.vaio-link.com, but it didn't help the problem. I'll keep on working on this, let me know if you have a solution.
I had a similar problem with a Tosh laptop, but after upgrading to the latest stack was okay. Although I still couldnt configure from the tosh laptop (no serial port recognised), when following the instructions within the bluetooth HOWTO on the o2 website it worked fine
http://www.myxda.com/XdaII/serviceandsupport/template/XdaIIHowToUse.vm
Seems to work okay to other people I've suggested it to as well who were having trouble
kulltogi said:
No not yet, I've downloaded sony's updates for bluetooth from www.vaio-link.com, but it didn't help the problem. I'll keep on working on this, let me know if you have a solution.
Click to expand...
Click to collapse
Uninstall Bluespace NE and use a Widcomm-BT Stack instead. Works fine with my MDA II (Towa Pocket Bluetooth Tools installed) and Sony Vaio PCG-Z1RSP.
You have to edit btwusb.inf before installing the Widcomm-Stack:
[WIDCOMM]
%SONYZ1.DeviceDesc%=BTWUSB, USB\VID_044e&PID_3003 ; SONY VAIO VID&PID
[strings]
SONYZ1.DeviceDesc="Sony VAIO Z1 Bluetooth Device"
How can you download the WidComm stack. Can this stack also be used on a Toshiba Satelite Pro m10. i have troubles with the toshiba bluetooth stack..
mdissel said:
How can you download the WidComm stack. Can this stack also be used on a Toshiba Satelite Pro m10. i have troubles with the toshiba bluetooth stack..
Click to expand...
Click to collapse
Should work if the internal transceiver is also manufactured by Cambridge Silicon Radio (CSR).
For instructions on installing different versions of the WidComm BT-stack,[includig the Dell one] have a look at this forum
http://forum.gsmhosting.com/vbb/forumdisplay.php?f=231
You can also look at this page for a step by step guide (not verified - "never touch a running system"):
http://www.jonscaife.com/
I had problems using activesync via bluetooth with a cheap class 1 dongle (Microtune I think) but managed to get it working by installing the Pocket Bluetooth stuff from the links in other threads (german internet site) and by following the instructions at http://www.jonscaife.com/ and installing the Widcomm stack linked from there (1.4.something I think) rather than the one that came with my dongle (1.3.2.7 I think).
Everything now works a treat - thanks Slartibartfass for the link - saved my hair from being pulled out.
http://bluetooth.i-networx.de/index_e.html
EZ Solution
I just found an easy solution for u guys who using Toshiba Bluetooth Stack ...
U guys no need to remove anything ...
All u need to do is verify the COM port of ur bluetooth ...
1. Go to the “Bluetooth Local COM” Applet in your Control Panel
2.Open “Bluetooth Local COM” applet where you will see a list of Ports
3. The Corerct port you need to use is
“COM7 Toshiba BT Port (COM7) LocalCOM-Server[SerialPort(TOSHIBA LocalCOM)]
and not “COM6 Toshiba BT Port (COM6) LocalCOM-Client”
From this guy here ... << http://thinkabdul.com/2006/10/12/tu...c-via-bluetooth-with-toshiba-bluetooth-stack/ >> TQ sir ...
Then ... u guys need to use ur REGEDIT to find this ...
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Notice there is SerialPort ?? yes ... JUST CHANGE THE string 'Bluetooth' to COM7 ...
After this just pair ur wat ever PDA u've got & thats it ... u got the ACTIVESYNC in the advance option of the services available ...
Hope u guys enjoy !!!
Hi all!
I found a strange problem reguarding bluetooth software conflicts beetween Qtek2020's Microsoft Bluetooth Stack and the Widcomm 1.4.1 (BluetoothGPS.cab) Stack.
It means.
Without the Widcomm Stack installed I am able to syncronize via Bluetooth with ActiveSync (com6).
And I moreover can surf the web trough my Qtek GPRS connection via Bluetooth. And that's perfect.
But.
With the Widcomm Stack installed I am still able to syncronize via Bluetooth with ActiveSync (on com6) but I loose the bluetooth-modem capacity!
I own a Trust180 Bluetooth/USB adapter.
I need the Widcomm Stack only to use my Fortuna Clip-On GPS and I will not need it anymore if I could find the way to use it with Qtek-Microsoft Bluetooth Stack, but I have not found the way to do it yet.
So I think I could only surf the registry to find the answer to let both stacks work together, is it possible?
Did anybody have the same problem?
Did anybody find the answer?
Thanks in advance!
Giuseppe
Hi Giuseppe,
I have the same Fortuna Clip-on GPS receiver and I'm able to use it with the MS BT stack. It bonds and offers the option to set up a serial port. If you accept this, it allocates Com 5 to the GPS. I use Tomtom navigation software and in the software set it up as a NEMA 38400 baud connection using Com 5 - all works fine.
Paul
XDA 2i Widcomm and Fortuna
I'm having the same problem with a fortuna clip on bluetooth gps and an XDA2i--for some reason that build of the widcomm stack (3900) doesn't work, yet earlier versions, such as that shipped with the XDA2s, appear to work fine--does anyone know where to find a version of the widcomm bluetooth stack from broadcom newer than 3900?
paulfanner said:
Hi Giuseppe,
I have the same Fortuna Clip-on GPS receiver and I'm able to use it with the MS BT stack. It bonds and offers the option to set up a serial port. If you accept this, it allocates Com 5 to the GPS. I use Tomtom navigation software and in the software set it up as a NEMA 38400 baud connection using Com 5 - all works fine.
Paul
Click to expand...
Click to collapse
Hi Paul,
thanks for your reply, I know my Clip-On should work together with every software for on road navigation...but...I unfortunately need OziExplorer for my off-road navigation and...OziExplorer need a com7 port.
That's all :wink:
I think I'll try Franson's tools: GPSGate & something else as I read here http://www.franson.com/forum/topic.asp?TOPIC_ID=17&SearchTerms=qtek,2020
I wouldn't like to hardreset my device again...I lost the number of my hardresets.
Thank you anywhere
Giuseppe
Hi giuseppe,I hate broadcom stack too, after many hresets, i thinks there is no way to solve this and other bugs, like the serial modem bluetooth connection.
The only winning move is to sell our 2020i and buy magician
Bye
Luca
Hi Luca, don't surrender, it can work!
I simply followed this http://franson.com/forum/topic.asp?TOPIC_ID=17&SearchTerms=qtek,2020 .
Now I am able to use my Fortuna GPS and my BT Motorola HS805 at the same time. And morover I am still using my Qtek's BT modem ability.
I payed 30 euros for Franson GPS Gate, but it solved my problems.
I am now trying to let ActiveSync work via Bluetooth because it's the only ability I lost. :?
Bye, thank You for your post,
Don't surrender!
Giuseppe
Hi, i'm looking for a way to connect my Nokia 6230 to my Wizard so that the Wizard is recognized by the Nokia as headset. Does anyone know if this is possible?
I've been looking at the widcom/broadcom stack but i couldn't get it to work yet. Insufficient memory error.
Does anyone know if this is somehow possible?
I dont think this works. However I have done the reverse using my Laptop. I used my laptop to take calls and answer them, while my PDA is in the other room! w00t
And do you think it would be possible if we get the broadcom/widcom stack running on the Wizard?
No. I dont think that has the correct services/profiles. And is it possible to get the widcomm stack on the Wizard? Doesn't it already have the microsoft stack on it?
Thanks
how did u answer the calls on your lap top??? thats awesome wanna share? thank you!
my email address is [email protected]
To be a "headset" for another device, you need the "Audio Gateway" profile.
Most desktop adapters support this profile (the Widcom stack does), so your desktop or laptop PC can be a headset for your phone. I've used this as a speakerphone when we were doing something in a class. It's pretty slick.
The Wizard does NOT have the Audio Gateway profile, so it cannot be the speakers or mic for another device.
However, SOME of the Ipaq PDA's can do this. I've done it with a Bluetooth-Equipped Ipaq, so I know that, at least in theory, it IS possible.
TomXP411 thanks. You basically explained it for beckhams777...
PDAs that are not a phone themselves are usually the ones that have this profile. If you find a device that has this profile AND uses the Widcomm stack, I may be able to extract this profile and use it on other devices also. It also depends on what version of widcomm stack they use... But, it could well be possible now that I know some other devices can do it
Thanks
I'll go searching 8)
got it! thanks anyways!
T-mobile MDA (USA version) and Bt
Ok, read all the posts, so there isn't a way to use my bt earbud with music on my MDA?
it worls great for phone, but MDA does NOT have audio gateway software
Al
When I pair with my Mac (OS X 10.4), the mac does discover bluetooth audio as a service on the wizard... however when i try to send sound, OS X states that it could not connect to the BT Audio device... So in theory it should be possible, if the service is discovered. We perhaps just need an app on the wizard that responds to the connection request...
Do anyone have working widcom stack for artemis? I read in helmi's universal forum that it could be done via some reg changes. Made it anyone working. I'm gonna give it a try. Keep fingers crossed
didn't have time to try everything.
download
KING HELMI_C's widcomm stack
install
ad following registry entries:
Code:
unfortunately too long post :mad: so check the .reg included
I just finished so far I tried
filetransfer Orbit <> Universal works
AD2P (or whats name bt stereo) Orbit<> Moto HT820
AVPRC (or whats name remote control - next,previous,pause,play) Orbit<> Moto HT 820 (using m$hit media player) works
PAN not yet
Headset not yet.
regfile included.
to Helmi: I posted this in artemis upgrade forum as well
please feel free to post or PM or mail me any bugs.....
BTW: I'm using O2 Orbit - Arte200
Sorry for noob question ... but what is the difference betwin Original one and Widcom?
Cheers ...
check menneisys (soory for misspelling) posts somewhere in General/networking
it has more bt profiles at least
pnsnake:
Are you with helmi also working on this hack?
Your widcom stack made for universal works on artemis as well?
Do I simpy follow the same procedure described by you on the link specified by you?
Apps such as Sniper, which require widcom/broadcom stack, will work on Artemis, as with MS stack it is not?
For newbies here is the article from pocketpcmag.com blog about the difference:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1649&more=1&c=1&tb=1&pb=1#more1649
dont know, i'm just trying to port it for arte, my Universal is running with Widcomm, so i decided to port it to my Orbit.
So far A2DP,AVCPR is working, file transfer, serial port are working. Headset profile not yet. I'm still trying to figure it out. Maybe Helmi will help.
so far i can transfer all sound from phone to my moto ht820 but not yet phonecalls
Tnx for quick reply. Guess I will try it out. I hope it is easy to remove it and come back to default settings (ms stack). I don't need bluetooth profiles, neither plan on using bt earphones.
File transfer (both ways), bluetooth sync and modem are indeed required. Hope it works.
I have a big problem. I tried this stack and bluetoothe works fine but GPS stoped working. If I uninstall it and try to activate MS Bluetooth stack, bluetooth stops working. So I have to decide: Bluetooth or GPS.
Is there any possibility to reactivate the MS Bluetooth stack?
Ah, I do have WM6 btw...
I was looking at a fix to get my car working with my WM6 Artemis, and thinking of trying the Widcomm stack. However, reading through this thread am I right in understanding that this version of the Widcomm stack won't yet support hands-free kits anyway?
Hey all,
I'm trying to pair a PPC with SonyEricsson's bluetooth watch MBW-150 to use moneytoo's brilliant SmartWatchM. This worked fine with my old PPC running the Microsoft bluetooth stack. My new PPC (LG KS20) uses the Widcomm/Broadcom stack, believed to be cleverer than the MS stack.
Here's the problem:
The PPC will not pair. The watch does not send out information according to the BT Service Discovery Protocol (SDP), because it was never meant to be paired with anything else than SE phones. The Microsoft stack didn't care and paired nonetheless. The Widcomm/Broadcom stack, however, will pair with BT devices only if it finds a supported profile. The watch uses the Serial Port Profile (SPP), but it doesn't say so, not sending any SDP information to the PPC. The PPC would support SPP of course, but doesn't pair as it has no way of knowing that the watch supports this profile.
In the end, when I try to pair, the PPC will see the watch but doesn't know what to do with it, and will not pair.
Is there any way of pairing (using a Widcomm/Broadcom stack) without SDP information? Can I enforce pairing with the watch? (I can easily insert serial port settings in the reg manually.)
Or can I somehow change my BT stack? I've read that the only way to do that would mean changing the ROM ... :-(
Any ideas? Any help would be greatly appreciated!
Many thanks,
N.
I'm using 32feet.NET library that supports only MS BT Stack. Fortunately I have just found this lib http://franson.com/bluetools/ that seems to support Widcomm Stack. I will try it soon.
EDIT:
What BT stack is on it? Is it Broadcom? Widcomm on Motorola Q9 is ok and lets you to pair device without any service but Broadcom on a one HP iPAQ I have tested doesnt.
EDIT2:
Not a good news. Franson Bluetools doesnt work on smartphones. I dont know much about this stuff but from what I have read it seems like pairing/bonding request is possible only in MS BT stack (via some non official function) and it's disabled in other BT stacks because of security issues.
Thanks for chiming in, moneytoo!
moneytoo said:
What BT stack is on it? Is it Broadcom? Widcomm on Motorola Q9 is ok and lets you to pair device without any service but Broadcom on a one HP iPAQ I have tested doesnt.
Click to expand...
Click to collapse
This may be a noob question but: How do I tell whether it's Broadcom or Widcomm? Is there still a difference since Broadcom bought Widcomm?
Anyway, BT manager will not pair ("no supported protocol found").
moneytoo said:
it seems like pairing/bonding request is possible only in MS BT stack (via some non official function) and it's disabled in other BT stacks because of security issues.
Click to expand...
Click to collapse
I'm afraid that's true. I haven't found anything so far that would point me to a workaround, backdoor or anything - and as my KS20 is a company phone I can hardly change the ROM
Let's hope someone comes up with an idea!