Hi to all, I'm writing here becouse I would need some help from the experts. I have an eten m800 with touch sensitive buttons that i allways disable them manually after i soft reset my device and I would like to ask you if somebody can tell me please how can i make to get them disabled automaticaly on startup becouse I've tried everything but no succes or if there is an app that does that. Thanx and sorry for my bad english.
solution
http://www.etenblog.com/2008/03/26/disable-soft-touch-buttons-on-glofiish-m800/
Related
First of all the correct unlock utility can be found on this post:
http://forum.xda-developers.com/viewtopic.php?t=33796
The next most important thing is to know how to do a hard reset, you hold the "Communication Manager" and "Voice Speed Dial" buttons while pressing in the soft reset button(that is the small button next to the IR port), make sure to keep holding the two buttons after you press the soft reset. Then a screen will apear to have you hit the green call button to make sure you want to reset. This will format your user info and make you peform the startup tests again.
If you want to load an english rom, I suggest the Qtek one since it is very easy and all the software runs on the computer instead of needing to load files on to a SD card or the wizard. The whole application can be found here:
http://www.beyondthetech.com/blogs/kjam/
The link to the file is at the bottom of the page in the last blog. You will need to have Active Sync 4.1 for this phone and it will have to be working for this application to work.
Have fun everyone and I think this forum is great.
Sorry, but I can't find anything on this pages.Does anybody have an English Rom of HTC Winrazd???I have a HTC winrazd but it's Germany.I needed an English Rom.Sorry for my bad English!!!!!!!!!!
hi all,
Am also looking for english rom for wizard..I would very much appreciate if any one can help.
Tks isse
English rom here
http://www.beyondthetech.com/blogs/kjam/2005/11/qtek-9100-rom-available-for-download.html
i have an imate kjam & i was wondering...
what would be the best rom image for it? should i keep it on the imate rom or is there a better rom with better features for my kjam?
tx in advance.
Hi all!
You sure notice that the diamond normally lock the screen after very short time while performing phone call!
please let me know how can i dismiss or reduce that operation
b.t.w
I can not record phone call with the diamond becouse every time the diamond lock during phone call the voice recording application stop working and cut the call recording when the diamond lock it self!!!
thanks!!!
you could have searched. but your new so ill be nice. welcome to xda-dev and here is what you need!
Thanks but I installed that file and didnt see any progra that I can execute, where is the executable file of the program and how can I use it?
Thanks again!
Genesis 44:12
Folks!!!!
I can not see where is the executable of that installed file!!!
please please please tell me EXACTLY how to find it
THANKS!!
alon111 said:
Folks!!!!
I can not see where is the executable of that installed file!!!
please please please tell me EXACTLY how to find it
THANKS!!
Click to expand...
Click to collapse
there's no executable, the cab probably adjusted some registry settings.
check and see (after a soft reboot) if it works when making a call...
works fine,thanks
How can I remove that application / registry if i want?
Unsuccessful Installation of NoSleep!!.cab
Why i cant install ? Easily getting message Installation of NoSleep!!.cab was unsuccessful ... Any suggestions ????
Same here
Hi all, I've got my jewel for 2 days so... thanks very much for your utstanding work.
I have the same question: It works ok, but if I need to unistall it how can I do it.
Thanks in advance for your help.
ok....here is my problem. everytime when i start my x1 (not from standby) there's a message which says that the "WADStartup" is incorrect and couldn't start. I can still access to the normal features but i think this is a little bit disturbing. so if anyone knows what to do, please help.
Greets
Dunnam
ok....fixed it....was a regestry file...for the wisbard advanced....and so on..
WADSartup problem
Hello ! I have the same problem ! Wisbar is the problem but I can't delete program !! How delete Wisbar ? Thx for answer !
hi all
recently i installed the S2U2 app ,i used it for a while and earlier today i uninstalled it
the problem is that now pressing the red (hung up) button doesnt lock the device
i suppose something must be don in the registry but i dont know what.....
HELP ME PLEASE
Hi there
Have you tried a soft reset?
If yes it might be a good idea to do a hard reset but make sure you back up all your info.
There is a .cab on s2u2 offical website to restore wm6.5 lock screen and if you can't find it try to google RestoreWM65DeviceLock.cab file and install it.
That will solve your problem. No need to change registry settings.
hello my phone Kaiomy Aegis 1288 (3G HTC Touch clone) started to become slow and after a soft reset only started to introduce the first and second splash screen and the second screen.
I also can no longer be located by SmartSync. :-\
Searching in xda forum found that it allows a disaster recovery of keys by pressing power + up + down volume, ai this point it looks for a file called k3img.bin the sd card should be formatted as fat 16.
when I turn the phone by pressing the keys mentioned above it finds the file has more than one error in step 4 is invalid while updating image: version check error :'(
I tried different images, most have the same message.
I need help to solve this problem already and I thank everyone who help me thanks
Today I tried to use the IDT to install a new rom.
Unfortunately, the IDT did not detect my phone.
Is there a way to remove the lock version check, so you can put a new rom from the sd card, without showing the error version check error?
I tried contacting the Kaiomy support, but I had no answer.
I do not know if I'm using it wrong the IDT.
I also tried the first aid, but the download button is not activated.
thanks for help
Help with Kaiomy Aegis 1226
Hi, im new in forum... i recently bought one Kaiomy Aegis 1226 in PY...
I liked the phone, but it come with rom in ESN Spanish, and I need PT-BR language.. I Asked for help, in other forum, but no answer.
Anyone can help me ROM PT-BR and version that I can Use in this phone?
Ps. This phone work with 2 SIM cards.
Waiting for help! thanks and sorry for bad english!
Msn for contact...
[email protected]