Has anyone had to replace one? Is it difficult? Any idea as to where I can find the part? I'd gladly buy a broken one for parts....
Mine sounds like the speaker is blown... it works, but rattles and vibrates...
wow....74 views and no replies....
I replyied to your request in my other post. As for the difficulty it is hard to say. I repair phones for a living so it wasn't hard for me the first time. What sucks is that you have to take the phone apart from back to front just to get to the ear speaker. A T6 and a small 2.0 phillips screwdriver will get you in. And some phone opening tools whould sureley help. I ordered a new faceplate for a customer from cnn.cn and it come with the ear speaker installed in the faceplate already. You could order it plus all the tools you need from there. The link is below:
http://cnn.cn/shop/tmobile-shadow-faceplate-copper-p-2674.html
very cool the faceplate doesnt seem too difficult to replace. Thanks!
Related
I've tried this in 2 XDA II's. I put my headphones it one and it works but you cant hear it and you have to hit the cap around a little for it to get sound for a slip second. I put my headphones in another XDA II and it works fine.. So obviously there is something wrong with this XDA II's headphone jack. The rubber cover to the headphone jack is missing, would this have any effect on it?
EDIT-
When I put it in the broken headphone jacked PDA when I insert the headphones in it makes a crinkle noise from me pushing it in. The other XDA II goes in smoothly. =/
Hi.
Rubber cap doesn't change anything (apart from stopping rubbish from getting into connector )
What you described is a case of worn out connector (in PDA).
It happens sometimes. Jack type connector aren't so tough, especially when you plug in and out often.
If you dismantle Blueangel, you'll have clear view of connector body soldered to PDA's mainboard.
You can do it. You can let somebody do it. Or You can leave it to professionals.
The connector needs to be replaced (very cheap part).
Maybe it's enough to bend metal terminals inside a little. A person who does hardware will know.
There's a optimistic version though.
Maybe only cleaning the terminals would do for you (I doubt it though).
It can be done without opening BA.
I'd recommend using some special spray (for cleaning electrical contact metals). Ask in electronic parts shop.
Good luck.
I ment my XDA II, not XDA IIs, lol. I have no expierence with opening the phone but I am good with electronics, but I don't know exactly what I'm looking for =/. I think I might just buy the HT820's Bluetooth headset, that would solve my problem overall.
Faulty socket repair...
Hey guys,
I have the same problem as above (crackling sound through headset) and the O2 service centre said it would cost £97 to fix.
But just did a web search and found a small company in London that said they can fix it (within 2 hours!!!!) for only £30!!!!
Im off to get it sorted so I'll let you know how it all went!!!
Richie Rich.
Mine wasn't like this until I bought it. I bought it from a friend for only $100USD because I'm very good friends with him, it works fine perfectly but the only problem is the headphones don't work in it (any headphones) and he knows there is something wrong with the jack, it wasn't like this until recently it happened. It's cheap to fix probably... but I'd rather just buy the HT820 bluetooth headset, its a good replacement instead of having to send in the PDA to fix a little headphone jack port I wont be ever using sooner or later.
but hey if that place fixes your phone, reply to this topic I want to know!
Headset Jack
I had this exact same problem in the past.
The headset would crack and go out every once in a while, sometimes I would have to move it around in order to get any sound at all.
I didn't do anything about it until it completely broke off, yes the inside plastic connected to the motherboard broke...
So I went to open it up, its not that hard, just a few screws, but I had to buy a torax screw driver (not that expensive)
I was also a bit shy about opening it, but I found this post:
http://forum.xda-developers.com/viewtopic.php?t=8525&highlight=opening+himilaya
you wont have to open it all the way up... just pulling the back cover off, then you will see the headset jack,
If it isn't broken or cracked then your solution would just be to take the metal connectors and a flathead screwdriver, and bend them,
Don’t bend the metal connectors too much so you can’t put a headset in, but just enough where there is definite connection around the headset,
You might want to put a headset in and see the dimensions before you close it (to save you from opening it up again)
You might want to clean the metal if it is dirty, ether with a dab of eyeglass cleaner on a soft cloth (eyeglass cleaner works well with electronics, due to the alcohol that evaporates)
Although if the metal is encrusted or rusty, you might want to take a small strip of sandpaper, or some abrasive object, but don’t rub too hard or you'll take them off!
Don’t worry too much about opening your device up; it is not hard, just open it with caution.
Good luck!
imablackhat, hi, did u mean that ht820 can output sound from media player & every sound from xda2? my current BT is bluetrek G2 and as far as i'm using it for talking only. how many hours the batt can last if we continously hear musics?
its 17 hours of music, www.expansys.com, search HT820, its the headset. I'm considering buying it for cheaper on eBay.
The rear speaker of my JAMin blew... I need a replacement so I can do the work myself and not have to send it over for a week to the lab. Where can I get one?
Thanks,
Nir
How to repair the sound issue on Prophet
Hi
I could read a lot of posts on that issue and found this solution:
Remove the battery cover. Then the camera cover: to do so, lift up the gently the cover starting from the side of the battery.
You will see something looking like a fan. This is the speaker. the problem is with the red wire whixh connect the speaker.
Turn on your prophet and run your favourite MP3 song.
then touch the red wire with your stylus. The sound should come back. Insert a piece of folded paper to keep the cable properly fixed. that's all
Watch out not to wish to fix it too nicely, you could damage the wire !
Hope this help, otherwise a return to the service department will be necessary !
Hope this helps
Regards
Régis
Hay the paper trick works!
I went here to learn how to remove the flap to the speakers:
http://www.modaco.com/index.php?showtopic=240109
Well, my speaker had the voice coil broken... touching the membrane would bring it back to life but that is no real solution. I replaced it with a speaker from a used old cellphone with some minor use of hot glue to fix it in place and seal around it.
It works now just as new.
Nir
yeah it is a real Problem.
mine is broken twice in 6 months.
tried the paper thing. but it sometimes sounds weird and there's some hissing. maybe I did it wrong. so I tweak it a bit and just lost it completely. no sound whatsoever now.
went to the service center today. they said that they have a new batch of speaker which supposed to be better than the previous one. if anyone can confirm.
rlou77 said:
Hi
I could read a lot of posts on that issue and found this solution:
Remove the battery cover. Then the camera cover: to do so, lift up the gently the cover starting from the side of the battery.
You will see something looking like a fan. This is the speaker. the problem is with the red wire whixh connect the speaker.
Turn on your prophet and run your favourite MP3 song.
then touch the red wire with your stylus. The sound should come back. Insert a piece of folded paper to keep the cable properly fixed. that's all
Watch out not to wish to fix it too nicely, you could damage the wire !
Hope this help, otherwise a return to the service department will be necessary !
Hope this helps
Regards
Régis
Click to expand...
Click to collapse
That's great, this fixed my problem. After I touch the red wire with my stylus, the speaker just works fine, don't even need a folder paper.
starrayfly said:
That's great, this fixed my problem. After I touch the red wire with my stylus, the speaker just works fine, don't even need a folder paper.
Click to expand...
Click to collapse
I'll try this one myself - my speaker just died again - it's been back once already.
Well, I followed the instructions above and now I have a working speaker again. A very low tech fix to a high tech device.
I have found a small bit of sponge does the job better than folded paper.
what is the type of speaker.
i mean can i use any speaker?
what's the best?
Mohammad, you seem to have missed the point of the replies in this thread. We don't know where to get another speaker from but we do know how to make the existing one work again.
oh, dude!!!
sorry
What a piece of ugly Speaker: O2 xda Neo!
Hay Guys,
I am suffering from this nasty problem since sometime. My brother has tweaked the speakers with a metal piece seem to work. However if I use speakerphone, it goes off.
Is there a permanent solution to this constant spurce of unhappiness.
Incidently I have been blessed with a on & off camera problem as well. I think I will never buy a DOPOD product in my life again.
My Camera has those colour matrix instead of proper images. Occasionally it behaves normally. I have tried hard reset already.
Any body? help !!!!!
Ugly Speakers: O2 xda Neo
Hay Guys,
I am suffering from this nasty problem since sometime. My brother has tweaked the speakers with a metal piece seem to work. However if I use speakerphone, it goes off.
Is there a permanent solution to this constant spurce of unhappiness.
Incidently I have been blessed with a on & off camera problem as well. I think I will never buy a DOPOD product in my life again.
My Camera has those colour matrix instead of proper images. Occasionally it behaves normally. I have tried hard reset already.
Any body? help !!!!!
I tried this....when i touched the red wire i got the sound back i was happy.. but not for long cause touching the wire now doesn't help anymore so i have to send it back
drdeepak said:
Hay Guys,
I am suffering from this nasty problem since sometime. My brother has tweaked the speakers with a metal piece seem to work. However if I use speakerphone, it goes off.
Is there a permanent solution to this constant spurce of unhappiness.
Incidently I have been blessed with a on & off camera problem as well. I think I will never buy a DOPOD product in my life again.
My Camera has those colour matrix instead of proper images. Occasionally it behaves normally. I have tried hard reset already.
Any body? help !!!!!
Click to expand...
Click to collapse
I wedged in a piece of foam. That's worked a treat.
The manufaturing quality of HTC is bad
I also have the speaker problem. And thanks for all of you to suggest that sponge and folder trick. I did it and i have put a small slice of ear plug sponge. For past 2 days my spearker is working. But dont know how long will this sponge give my speaker lifesupport. I am sure after few days again its going to be problem. Hey,...... is there anyone in this thread who has used sponge/paper and the speaker is working for long time.. at least a year ?.
These HTC products seem really bad quality products.
that worked
http://www.4shared.com/file/6894706/ca35cee6/altavoz_s200.html
motorola l7 speaker is too a candidate
It's too bad they saved on the speaker. Guess the manufacturer of the speaker had a very nice presentation @ HTC
Trying to download that pdf file, but it's not working :/ However I've read on other occasions that people talk about that motorola speaker as a replacement. Might be worth giving a more detailed look into that.
What exactly is the problem with the speaker btw? Did anyone narrowed that down already? Why is the speaker not functioning properly?
pdf
The file contains instructions to change the original speaker using the spk of a motorola v525.
I did it yesterday, and works fine, but isn´t easy to do it
I did a REALLY a stupid thing this weekend. I had the trunk of my wife's car up and had no pockets, so I put the phone on the edge of the trunk and put everything else in the trunk. I swung the lid down and it bounced back up.
I had no idea what was keeping the trunk from closing until I saw my phone sitting there. Thankfully, the trunk's on a Toyota Echo, so it didn't crush the phone, but it did dent the faceplate right where the speaker and email/browser button is.
Now calls are really scratchy and crackling, so I'm guessing that I have a partial connection to the speaker or crunched it well enough to kill it.
While it's useable, it makes it hard to use - is there anyone on the forums that does repairs?
kcfried said:
While it's useable, it makes it hard to use - is there anyone on the forums that does repairs?
Click to expand...
Click to collapse
How about you!!??
All the info you need is here.
Mike
I know this thread is a bit old, but I just fixed the same problem with my Hermes.
Find a good disassembly guide and pull the beast apart, when you get to the speaker, it will be caved in/crushed.
There are two clips on either of the long sides, unclip them and carefully lift the metal bit off a little way, get a small jewelers flat head screwdriver and push the dints out, being very careful of the delicate wires.
Or you could just find a new speaker
EDIT: While you're at it, bend the speaker contacts out a bit too just in case they were squashed, also to get better contact.
Hi there,
I accidently damaged the speaker grill of my HD2. The speaker is still working, but it looks really ugly as the black color got lost and now there are some silver scratches on the grill.
So, is there a way to exchange it? Which spare parts do I need and how much would I have to take apart in order to replace it.
Well, I know, it is not really necessary to replace it as everything functions as it should, but you know, I am really fussy
Thanks!
I would think there would be the same work involved as replacing the speaker, try Googling for HD2 speaker replacements. Can you not just ♫ Paint It, Black ♫?
Thanks for your answer. Well, the grill is not attached to the speaker, as you can see hear: http://www.feelstore.net/web160/Admin/Product20/ProImage1/20109623472367855.jpg
But I can't figure out where it is attached to watching the official disassembly video.
I tried to paint it black, but it doesnt really work that well. I don't know, perhaps I used a wrong pen.
I don't mean it's attatched to the speaker, but rather to get the grill out the HD2 will have to be taken apart the same way as if you were going to replace the speaker. I would assume.
I replaced the housing on my old BB Pearl, and my G1 (which was way, way more complicated).
I've got a Magic now, and the ear speaker is acting up. When I make a call, sometimes the ear speaker is just dead - I can switch to the speakerphone no problem, and then when I switch back I usually have sound in the ear speaker, but I suspect physical speaker damage because sometimes it'll cut out and I can squeeze the top of the headset just right and it'll come back. Crossing my fingers that it's not something else electronic in the board.
I want to replace it - and while I've got it apart, may as well give it a new body since they are only $10-$15. (wish I could upgrade it to the Fender body with the 3.5mm headphone jack lol)
Problem is, although I can find new housings all over the place (including eBay), I can't find the replacement speaker anywhere but some GlobalPartsDirect website, and they have a 5-unit minimum wholesale order quantity.
Any suggestions on where to look? Thanks in advance!!
Bump on this-
I had PM'd a seller on Ebay who said they had one - just waited over 3 weeks for it to arrive, only to discover they sent me a replacement speakerphone speaker.
I could not have been clearer with them that it was the ear speaker that was not working.
Any help is appreciated - I now need to resolve this urgently, as I can't use my phone as a phone, and I'm postponing all sorts of things that I need to resolve - of course the timing is such that I need to liquidate some things and I can't set up Craigslist ads because I can't talk on my phone. Please help!