W100 and Kaiser - Tilt, TyTN II, MDA Vario III Accessories

Dear Xda's, i have a problem and i need help! I would like to know if there is anyone that knows a rom in which the w100 remote control works perfectly? Since all the Roms that i have tried lately (Dutty, L26, UDK) fail misserably when i try to make to make the remote work. They all af the same problem that they just dont recoqnise the remote, if i plug it in, the sounds still comes over the speaker instead of the headphones.
I also tried the drivers on each rom but they fail to install since its not necessary accourding to them. I have tried extracting the drivers and install one of the seperate drivers but they eather cause my touchscreen not to work or my sound disappears.
I've used the search btw and googled, but after 3 nights for searching and trying i havent found anything so far.
If someone knows a rom, driver or anything that works, please say it here since im gettin a bit frustated. Thanks!

Bump, anyone plix?

Just gonna do smooth bump again since after a month of trying still no succes. HTC isnt responding with an answer so my only hope is here!

L26 KaiserDiamond Throttle Launcher Beta 6 works partially
I have a Kaiser (tilt) running this ROM and the sound is OK. Volume control pops WMP (I use S2P) - mute pops Audio Control and I did not have a chance to test the phone funcitons. But at least I can liste to music
Did you try the original HTC Tytn II ROM posted somewhere in Kaiser ROM development ?
I hope this helps.

Related

HTC w100 RC Device and the Polaris ROM

Hello,
I am running a Polaris/Cruise based ROM created by Dutty on my TyTN II. (Don't flame! )
Unfortunately, my w100 HTC RC Remote does not seem to work at all on this particular rom. I do get music, coming from audio manager, but the buttons do not work. On his previous roms that are NOT based on the polaris build, the device works fine.
I was wondering if any of you cooks/developers/etc have any idea why this would be so. Dutty does not know either at the moment.
My only un-educated guess is that if the Polaris/Cruise comes with it's own headset, with FM radio, that that is what the device is expecting, so the generic headset drivers/files for the w100 are not on the device/rom. But I am probably way off.
I have tried updating the drivers, but each time it tells me they are up to date. [edit: drivers are for old devices anyways it seems)
So ifyou have any clue or guess as to what might be different between these two roms (tytn II rom and polaris rom) that would affect RC headsets, please let me know!
Thanks.
I've got the exact same problem here, but on another Rom, the one from M-Amine. Too bad this remote control does not work anymore.
you have to install audio manager 1.2 but unfortunately you wont be able to see id/3 tags on manila. on audio manager it will.

New ROM WM6.1 CE OS 5.2.19716 (Build 19716.1.1.0 PV DVH)

Heres a new WM6.1 rom from pdaviet...
I tried it on my BA and it is stable with a lot of features and fixes...
here's the link:
Comes with ramdisk and no ramdisk version...
http://rapidshare.com/files/90807518/BA_ROM_CE_OS_5.2.19716__Build_19716.1.1.0_PV_DVH__16MB_PP.rar
http://rapidshare.com/files/9080750...uild_19716.1.1.0_PV_DVH__16MB_Ram_16MB_PP.rar
New WM6.1 ROM
elow is several form of reproduction ROM v6.01.01 ( 01 ) with entrust dress up because of VIP TaQuangDuc blueprint ( like with board ROM v5.6.02 ( 01 ) and CLEAN )
Core 5.2.19716
Build 19716.1.1.0
16MB RamDisk and NoRamDisk
16MB PagePool
Feature of ROM 6.01.01 ( 01 )
Tích close ( Added ) :
Internet Sharing
Bass Treble ( use for ear listen )
ClearTemp 0.9.9
Midi Support
PPC Pim Backup 2.8
SMS Delivery Fix
SMS Alert Fix
SRS Wow HD 1.2.10.0 ( false establish suitable sound for listen music )
Zoom SMS
Ce Commander 1.04 ( submit booklist check and approve use many )
ExSoftKey ( mortgage 2 phím function )
Flight Mode
PBar 1.5
USB HDD
Office 6.1 ( Word and Excel )
Theme Windows Mobile 6.1
Sound Fix
Fix mistake xoay màn form when play video
Remove ( removed ) :
NetCf ( can deduct out when need )
This ROM is not bad at all. Is it a real 6.1 ROM?
The Good:
1) BT Stack good. I've used my S9 stereo headset and there's no problems so far. Music plays well.
2) Very fast and stable. No problems scrolling while browsing using PIE.
3) Very Clean ROM
The Bad:
1) I have not found a streaming media player that works with it. I've tried TCPMP and the HTC Streaming Media Player. I cannot play youtube videos. Any clues on how to do this with WM6.1
2) When I try to update the library in WMP to include songs on my SD card, I end up with not only songs but all ringtones, etc. in the library.
Nice Job dude.
Really nice 6.1 rom? 0_o
This ROM working fast. Cool! But:
1. My PC (WinXP SP2) can't find driver for BA, ActiveSync installed.
2. Some several programs don't start up. (popup window with "The file 'mchat' cannot be opened. Either it is not signed with a trusted certificate..."
Can anybody help me with this problems?
PS: Sorry for bad english.
kabanera said:
This ROM working fast. Cool! But:
1. My PC (WinXP SP2) can't find driver for BA, ActiveSync installed.
2. Some several programs don't start up. (popup window with "The file 'mchat' cannot be opened. Either it is not signed with a trusted certificate..."
Can anybody help me with this problems?
PS: Sorry for bad english.
Click to expand...
Click to collapse
You must to install NETCF2.0 or 3.5 to complete
DVHA
nice to see you in our forum, thanx for ur great ROM and support. I have a question regarding the battery drain, i have a brand new battery but it lasts only for 12-18 hours with usual phone usage and GPRS always connected (for exchange server), is it normal or i have a problem?
Backlight not working
Love this rom. The only issue I have found so far is my backlight not working. When I soft reset, backlight is on. As soon as it boots into the rom, the backlight is off. Have checked settings, pressed and held power button (to turn on backlight) but nothing I do seems to turn the backlight on.
Anyone else with this issue?
second hard reset fixed the backlight problem
Please disregard my last post. did a second hard reset - this fixed baclight problem!
hmmm...might give it a try...while waiting for xplode's release
can any body uplaod it some where else
pleeeeease
BA WM6.1 bt stack
Hi !
Can somebody looking in the bluetooth settings that in option available selecting the handsfree,ad2p,discovery...etc. ( audiogateway ) ?
Or only automatically working ?
Thank's a lot:
Tamage
P.s.: In the wm2003se I could use the mono BT headset as audio gateway and all of sounds going to the headset . But in this rom not?
gr8 rom mirror
Code:
http://rapidshare.com/files/91564023/BA_ROM_CE_OS_5.2.19716__Build_19716.1.1.0_PV_DVH__16MB_Ram_16MB_PP.rar
rambo6 said:
This ROM is not bad at all. Is it a real 6.1 ROM?
The Good:
1) BT Stack good. I've used my S9 stereo headset and there's no problems so far. Music plays well.
2) Very fast and stable. No problems scrolling while browsing using PIE.
3) Very Clean ROM
The Bad:
1) I have not found a streaming media player that works with it. I've tried TCPMP and the HTC Streaming Media Player. I cannot play youtube videos. Any clues on how to do this with WM6.1
2) When I try to update the library in WMP to include songs on my SD card, I end up with not only songs but all ringtones, etc. in the library.
Nice Job dude.
Click to expand...
Click to collapse
@rambo6
Try this plugin for TCPMP:
http://forum.xda-developers.com/showthread.php?t=339269&page=7
I have not flashed the new rom, but I guess since this is independent from the rom itself, it should work ok. Enjoy!
egzthunder1
Thanks. I think I've tried that video bundle. But I'll give it another go just to be sure.
PDAVIET:
I know that Helmi, Xplode, and others have made lots of contributions to the BA. I know this ROM would not exist without their work also. Nevertheless this ROM is simply rocks. Possibly the best ROM for BA yet. The more I use it the more I like it.
1) It connects quickly to WiFi. If the device is turned off, the WiFi goes off. But when the device is turned on again later, the WiFi springs to life and connects. With other BA ROMs, I had to go to the wireless manager page to restart WiFi.
2) The Bluetooth has fantastic sound. Better yet, it stays on when the device is shut off so that I can use a BT headset reliably. Some earlier ROMs had to keep waking up to keep the BT going. This was very annoying.
3) The 6.1 is very stable and fast. I haven't had to do any resets so far.
I am finding some programs won't load. I get errors like "Not Signed or Bad Certificate". Is there any way around this?
rambo6 said:
egzthunder1
Thanks. I think I've tried that video bundle. But I'll give it another go just to be sure.
PDAVIET:
I know that Helmi, Xplode, and others have made lots of contributions to the BA. I know this ROM would not exist without their work also. Nevertheless this ROM is simply rocks. Possibly the best ROM for BA yet. The more I use it the more I like it.
1) It connects quickly to WiFi. If the device is turned off, the WiFi goes off. But when the device is turned on again later, the WiFi springs to life and connects. With other BA ROMs, I had to go to the wireless manager page to restart WiFi.
2) The Bluetooth has fantastic sound. Better yet, it stays on when the device is shut off so that I can use a BT headset reliably. Some earlier ROMs had to keep waking up to keep the BT going. This was very annoying.
3) The 6.1 is very stable and fast. I haven't had to do any resets so far.
I am finding some programs won't load. I get errors like "Not Signed or Bad Certificate". Is there any way around this?
Click to expand...
Click to collapse
Can you post which programs are not running? I believe that I saw a patch for the Certificates error somewhere in the Development and Hacking section. However, I am not sure if these patches are program specific.
i hope that u upload it to another site such as megashare
thanks
rambo6 said:
egzthunder1
Thanks. I think I've tried that video bundle. But I'll give it another go just to be sure.
PDAVIET:
I know that Helmi, Xplode, and others have made lots of contributions to the BA. I know this ROM would not exist without their work also. Nevertheless this ROM is simply rocks. Possibly the best ROM for BA yet. The more I use it the more I like it.
1) It connects quickly to WiFi. If the device is turned off, the WiFi goes off. But when the device is turned on again later, the WiFi springs to life and connects. With other BA ROMs, I had to go to the wireless manager page to restart WiFi.
2) The Bluetooth has fantastic sound. Better yet, it stays on when the device is shut off so that I can use a BT headset reliably. Some earlier ROMs had to keep waking up to keep the BT going. This was very annoying.
3) The 6.1 is very stable and fast. I haven't had to do any resets so far.
I am finding some programs won't load. I get errors like "Not Signed or Bad Certificate". Is there any way around this?
Click to expand...
Click to collapse
U have to install netcf 2.0 or 3.5=)
rambo6 said:
2) The Bluetooth has fantastic sound. Better yet, it stays on when the device is shut off so that I can use a BT headset reliably. Some earlier ROMs had to keep waking up to keep the BT going. This was very annoying.
Click to expand...
Click to collapse
rambo6: are you saying that the random BT wakup issue is gone with this ROM? can you confirm this?
Thanks,
PoGa
poga said:
rambo6: are you saying that the random BT wakup issue is gone with this ROM? can you confirm this?
Thanks,
PoGa
Click to expand...
Click to collapse
I don't think that is what he is saying, but one can always hope

GPS on X9501

Hey Guys,
Downloaded the GPSDrv.cab off the forums and loaded it onto my X9501...
Now I know that there is a difference between the X9501 and the other version that most people have... Especially in sound drivers (I've noticed this first hand when working with Comonex on the phone stuff)...
Anyways, when I install the GPSDrv.cab, the GPS works... HOWEVER the sound stops working on both Windows side, and snapvue...
After uninstalling the cab, sound starts to work anymore...
Does anyone have any ideas, or other GPS enabling cabs I could use?
PS. I've installed/uninstalled 4 times to confirm it was infact the cab...
Zhariak said:
Hey Guys,
Downloaded the GPSDrv.cab off the forums and loaded it onto my X9501...
Now I know that there is a difference between the X9501 and the other version that most people have... Especially in sound drivers (I've noticed this first hand when working with Comonex on the phone stuff)...
Anyways, when I install the GPSDrv.cab, the GPS works... HOWEVER the sound stops working on both Windows side, and snapvue...
After uninstalling the cab, sound starts to work anymore...
Does anyone have any ideas, or other GPS enabling cabs I could use?
PS. I've installed/uninstalled 4 times to confirm it was infact the cab...
Click to expand...
Click to collapse
As said in the thread where you downloaded the cab. the sound will not work with this method. Use a rom instead.
Uninstalled the cab, and sound now works, and GPS works...
woohoo

BlueTooth CarKit ISSUE

Hello buddies,
this thread is about some strange behavior of bluetooth with current energy roms. details follow...
why a new thread?
I decided to start a new thread, because it leads to nothing to discussing this topic in the main thread ... found some people who shares my sorrow, never the less there was a lot of users who hit the answer button on page 1 and report "problem xy" or "hell yeah what a nice rom"
what is the problem?
I'm not able to pair my TouchHD with my car's Hands Free system. A2DP works fine, but when I turn on the Radio Unit a small blue headphone symbol blinks in the statusbar of the phone - no pairing succeeds. If I switch to BT audio, a black headphone symbol stays resident and the media player opens for playback, so A2DP works. Installing SIM access profile on roms without built in rSAP or other various tools in addition doesn't make it work. [see "what have been done" section!]
Just used the latest MIRI-Roms (discontinued) and it works like a charm for me. After initial setup, Hands Free (version 1.5) and Wireless Stereo where installed and activated - Serial Port left out unchecked. Then a popup message informs me, that a BT-Device is trying to access phones phonebook remotly - all went fine.
as reported by other users, this behavior occurs since ~may versions of energy roms...
about the environment
Using energy's rom on TouchHD [Blackstone] T8282 [BLAC100 32M]
flashing with USPL
phone's SPL: stock SPL-1.54.0000
radio: 1.12.25.16D3 - don't see a reason to update
protocoll: 52.60.25.33U
carrier: O2 GERMAN
what have been done so far?
I've tested the pairing of my device in various cars
tested with my Renault Megane 3 integrated car kit (arkamys audio / parrot)
tested with a 2010 Toyota Prius car kit
tested with a subaru 2010 car kit
tested with Blaupunkt Toronto 400 BT head unit by phitsc
I've tried programs, suggested by the xda community
installed Bluetooth_SAP_Profile.CAB
installed BT_SAP.cab
installed Gooru_Sense_BT_A2DP_Fix_Cab_by_JVH3.CAB
installed HeadsetFix.cab
installed JetBTHFExt_1.40.CAB
reg-tweaks on "HKLM\Software\Microsoft\Obex\ObexServiceMask"
roms tried
Miri_WM65_21891_Premium_Manila_2.5_V20.0_NoHtcMessaging.rar
Miri_WM65_21893_Premium_Manila_2.5_REV22.0.rar
Energy.BLACKSTONE.23563.Sense2.5.Cookie.HomeTab.Apr.23.7z
Energy.BLACKSTONE.23566.Sense2.5.Cookie.HomeTab.May.01.7z
Energy.BLACKSTONE.23569.Sense2.5.Cookie.May.16.7z
Energy.BLACKSTONE.21903.Sense2.5.Cookie.May.16.7z
HD_Miri_6.5.X_23541_SENSE25.rar
Miri_WM65_21893_V38.0_Premium.rar
Energy.BLACKSTONE.23569.Sense2.5.Cookie.May.22.7z
(green indicates a working rom)
dear community...
please use this thread wisely for recommendations or suggestions on this topic. keep this thread a productive discussion. if you have a contact to NRGZ, feel free to report this thread, cause my afford to reach him fails.
So I hope we can figure out, why it does'nt work as it should to...
kindly regards, FS
Hi,
I have the same problem with my Touch Pro and my Megane 3.
I have to switch back to an older version of the rom then..
Hi,
I'm using Energy ROM Titanium 18may.
Radio 1.17.xxxx
No problem here with BT of my car stereo.
I had this problem untill I delete the old pairing on the car BT.
After this, the phone pair great
firespawn said:
Hello buddies,
this thread is about some strange behavior of bluetooth with current energy roms. details follow...
why a new thread?
I decided to start a new thread, because it leads to nothing to discussing this topic in the main thread ... found some people who shares my sorrow, never the less there was a lot of users who hit the answer button on page 1 and report "problem xy" or "hell yeah what a nice rom"
what is the problem?
I'm not able to pair my TouchHD with my car's Hands Free system. A2DP works fine, but when I turn on the Radio Unit a small blue headphone symbol blinks in the statusbar of the phone - no pairing succeeds. If I switch to BT audio, a black headphone symbol stays resident and the media player opens for playback, so A2DP works. Installing SIM access profile on roms without built in rSAP or other various tools in addition doesn't make it work. [see "what have been done" section!]
Just used the latest MIRI-Roms (discontinued) and it works like a charm for me. After initial setup, Hands Free (version 1.5) and Wireless Stereo where installed and activated - Serial Port left out unchecked. Then a popup message informs me, that a BT-Device is trying to access phones phonebook remotly - all went fine.
as reported by other users, this behavior occurs since ~may versions of energy roms...
about the environment
Using energy's rom on TouchHD [Blackstone] T8282 [BLAC100 32M]
flashing with USPL
phone's SPL: stock SPL-1.54.0000
radio: 1.12.25.16D3 - don't see a reason to update
protocoll: 52.60.25.33U
carrier: O2 GERMAN
what have been done so far?
I've tested the pairing of my device in various cars
tested with my Renault Megane 3 integrated car kit (arkamys audio / parrot)
tested with a 2010 Toyota Prius car kit
tested with a subaru 2010 car kit
tested with Blaupunkt Toronto 400 BT head unit by phitsc
I've tried programs, suggested by the xda community
installed Bluetooth_SAP_Profile.CAB
installed BT_SAP.cab
installed Gooru_Sense_BT_A2DP_Fix_Cab_by_JVH3.CAB
installed HeadsetFix.cab
installed JetBTHFExt_1.40.CAB
reg-tweaks on "HKLM\Software\Microsoft\Obex\ObexServiceMask"
roms tried
Miri_WM65_21891_Premium_Manila_2.5_V20.0_NoHtcMessaging.rar
Miri_WM65_21893_Premium_Manila_2.5_REV22.0.rar
Energy.BLACKSTONE.23563.Sense2.5.Cookie.HomeTab.Apr.23.7z
Energy.BLACKSTONE.23566.Sense2.5.Cookie.HomeTab.May.01.7z
Energy.BLACKSTONE.23569.Sense2.5.Cookie.May.16.7z
Energy.BLACKSTONE.21903.Sense2.5.Cookie.May.16.7z
HD_Miri_6.5.X_23541_SENSE25.rar
Miri_WM65_21893_V38.0_Premium.rar
Energy.BLACKSTONE.23569.Sense2.5.Cookie.May.22.7z
(green indicates a working rom)
dear community...
please use this thread wisely for recommendations or suggestions on this topic. keep this thread a productive discussion. if you have a contact to NRGZ, feel free to report this thread, cause my afford to reach him fails.
So I hope we can figure out, why it does'nt work as it should to...
kindly regards, FS
Click to expand...
Click to collapse
Mine works fine without any cab fix.. your pda must search 4 a car kit as a bleutotth headset! comm manager /bluetooth/ set up BT headset turn your cars BT on and there you go!! i tell yo the energy roms work fine 4 me
+ 1 here
Don-Maco said:
Mine works fine without any cab fix.. your pda must search 4 a car kit as a bleutotth headset! comm manager /bluetooth/ set up BT headset turn your cars BT on and there you go!! i tell yo the energy roms work fine 4 me
Click to expand...
Click to collapse
sorry dude, not much help but i have the same experience; all energy roms (and i do mean all of them) work perfectly with my parot CK3100 but then i do task 29 before every flash & hard reset a few times after initial setup.
in addition, i also flash the latest stock rom from htc every so often.
i know this seems a bit ott but i rarely seem to suffer the buggy issues that many others do.
hope you get it sorted
It is not about Task 29.
I had problems with access through the original multi-functional touch panel in the Ford Mondeo. When I went to CLEAN ROM, all troubles are gone. The problem is that you must agree with access on the phone. This question is not on Energy ROMs displayed. I can pair phone but can not be used for handsfree calling.
Now I have a CLEAN ROM and everything is bugfree.
To be honest, no ROM to date consistently works with the in-car bluetooth kit in our Zafira. It works flawlessly with my old phone (K800i) and my wife's phone (W950i) but it's just not stable for the HD.
If it works, it'll drop the bluetooth connection after about 15mins. It's as if there is a time-out, but I've hunted the registry and both HD Tweak and Adv. Config for anything related to this but with no joy.
My current ROM seems to be about the best so far (kwbr's WM6.5 and Manila 2.1) but it still drops the connection randomly yet other times it may keep the connection for over an hour no problems.
Seems very very strange to me, but from what I've read, it's a common issue with the bluetooth kits in GM's euro cars (Vauxhall, Saab, Chevrolet etc.)
|WWE|BLACKSTONE|¯`·.¸¸.- Energy -.¸¸.·´¯ |BlueTooth CarKit ISSUE|`·.¸¸.·´¯`·.¸¸.·´¯)
@DaRulah
what kind of rilphone / radio rom do you use - pointing my research in this direction, may that's the reason... does bluetooth depends on the used radio rom?
@raistlin74 / @Don-Maco
tried all ways possible
car to phone
htc comm mgr to car
windows BT settings to car
@superseagull
having the latest carrier rom flashed before (comes with SPL 1.54 to enable flashing of 6.5+ roms)
what kind of rilphone / radio rom do you use? [EDIT: saw it in your signature ]
@malson
well, sounds logic ... the pairing won't succeed cause the phone's dialog to allow access doesn't appear. will try it with energy's titanium rom. never the less, the outdated MIRI roms /w sense 2.5 and windows mobile 6.5 works for me
@jonifen
as mentioned, the phone is compatible with my car - in basic. simply doesn't work with energy roms.
therefore I tried it with various other systems to exclude a mismatch with my car kit
well, thanks for you participation so far - may we get the clue with my problem
regards - FS
2 options?
Why only two options yes and yes? Why not a no option in the poll? I don't have a problem with nrg roms.
firespawn said:
@DaRulah
what kind of rilphone / radio rom do you use - pointing my research in this direction, may that's the reason... does bluetooth depends on the used radio rom?
Click to expand...
Click to collapse
Radio: 1.14.25.35 with the matching rilphone
Rom: Energy.RAPHAEL.23569.Sense2.5.GTX.Themed.May.13
i don't think it's a radio problem since i used that one with older energy roms, and had no problems with my car kit.
no problems here
I tried my phone with a bluetooth carkit in a BMW X5 and found no problems with it. I use latest NRG rom 21905 with CHT and latest Radio (1.17) with Rilphone 1.15. i suggest u upgrade to those as well.
GL
As this is about a genaral pairing problem I don't know if it will help u as u seem to be able to pair but just have Handsfree problems...
But as u didn't mention how u tested out the fixes I will post this here.
Remember i had a problem once when trying to pair my HD.
Base:
- Touch HD with some newer Sense 2.5
- A2DP wasn't working or Windows Mediaplayer hooked A2DP keys
AFTER I tried to fix A2DP problem (installed some "fix" cabs u mentioned above) I wasn't able to pair anymore.
Here is what i figured out:
- To get it working again it didn't help to over-install another fix - don't know why but seems that some fixes do reg changes wich break other ones.
- I had to hard reset the device
- so never try to install 1 fix after another to figure it out
- always do 1 hardreset + 1 fix then hardreset again
- only really good working fix for me was HeadsetFix.cab I posted in NRG thread - many other fixes broke my pairing capability
Now im on:
- actual NRG 2. June MaxSense 23xxx
- HeadsetFix.cab installed (otherwise Windows Mediaplayer pops up or it doesn't work for me)
- haven't had problem with pairing since several month with any NRG Rom (before it wasn't depending on NRG but on Sense 2.5 / but just had A2DP issue - pairing issue just with wrong fixes installed)
Radios I tested were .12 and .14
Tested BT Headsets/Caraudios:
- Motorola HT820
- some Sony MEX BT xxxx Caraudio
BTW for all who are interested in - i always install "AutoA2DP" or "AutoActiveSync" cause A2DP doesn't pair automaticaly in my car - just the Handsfree pairs by default.
Mimic NRG style ROM Thread !!!!!!!!!!!!
eddyve said:
Why only two options yes and yes? Why not a no option in the poll? I don't have a problem with nrg roms.
Click to expand...
Click to collapse
Yes + 1
Why only YES and YES option ...
No problems with any BT. Myy HD conects on any BT device that i have with no problems...
*****************************************************
PS: its not nice to use for your thread title the same format and characters that NRG use for all of his roms !!!!!!!!!!!!
Its a bit confusing for regular users and misleading....
And if i was you i will change the title not to mimic NRG ROM threads !!!!!!!!!!!!!!!!!!!!!!!!!!!!
colossus
|WWE|BLACKSTONE|¯`·.¸¸.- Energy -.¸¸.·´¯ |BlueTooth CarKit ISSUE|`·.¸¸.·´¯`·.¸¸.·´¯)
@eddyve
it is a yes poll (or call it simply a counter), because I want to know how many people have a problem like me
@DaRulah
well, good to know
@TheOne741
updating my radio rom asap, just to confirm that the radio version is not the source of my problem ... I will report on this
@FrEcP
thank you very much for your detailed explaination! I also do hard resets between the fixes. I will try HeadsetFix.cab in combination with AutoA2DP on a clean rom
@colossus_r
do you have anything useful to contribute? stay on topic please!
Well, thank you all so far, I will report my progress when the mentioned tips have finished... regards - FS
mimic NRG ROM thread
firespawn said:
@colossus_r do you have anything useful to contribute? stay on topic please!
Click to expand...
Click to collapse
@firespawn: Whats the matter with you? colossus_r is on the right way. Why only "Yes or Yes" in poll. And whats about mimic NRG ROM threads?
Please choose your own style for this thread.
On topic: No problem with Siemens HKW 720 Bluetooth Car Kit at all. Im using Handsfree-Profile and rSAP-Profile.
Issues with bluetooth ...
aleskow said:
@firespawn: Whats the matter with you? colossus_r is on the right way. Why only "Yes or Yes" in poll. And whats about mimic NRG ROM threads?
Please choose your own style for this thread.
On topic: No problem with Siemens HKW 720 Bluetooth Car Kit at all. Im using Handsfree-Profile and rSAP-Profile.
Click to expand...
Click to collapse
Again, it is used as a counter aaand again: stay on topic and stop cryin' like a baby about the choosen subject! I couldn't change it anymore!!!
Please do not post things like: Oh boy, mine is working fine *smiley*, cause this is worth nothing!
Sorry, I'm a bit frustrated, because a productive research on this problem seems to be impossible...
superseagull said:
sorry dude, not much help but i have the same experience; all energy roms (and i do mean all of them) work perfectly with my parot CK3100 but then i do task 29 before every flash & hard reset a few times after initial setup.
in addition, i also flash the latest stock rom from htc every so often.
i know this seems a bit ott but i rarely seem to suffer the buggy issues that many others do.
hope you get it sorted
Click to expand...
Click to collapse
Right is right i also never had bugs since energy roms march 2010
and the opera 10 never gave issues! so some flashers are doing somthing wrong! when using titanium the rom is superbly fast i also spice things up with the htc-performance.cab.
firespawn said:
Again, it is used as a counter aaand again: stay on topic and stop cryin' like a baby about the choosen subject! I couldn't change it anymore!!!
Please do not post things like: Oh boy, mine is working fine *smiley*, cause this is worth nothing!
Sorry, I'm a bit frustrated, because a productive research on this problem seems to be impossible...
Click to expand...
Click to collapse
We cant do any research if we dont have the problem
i think you should swich the the car bluetooth on and keep it pressed till the device finds it! thats what i did on other cars
or you will have to reset the cars bluetooth as shown in the manual
firespawn said:
@eddyve
it is a yes poll (or call it simply a counter), because I want to know how many people have a problem like me
@DaRulah
well, good to know
@TheOne741
updating my radio rom asap, just to confirm that the radio version is not the source of my problem ... I will report on this
@FrEcP
thank you very much for your detailed explaination! I also do hard resets between the fixes. I will try HeadsetFix.cab in combination with AutoA2DP on a clean rom
@colossus_r
do you have anything useful to contribute? stay on topic please!
Well, thank you all so far, I will report my progress when the mentioned tips have finished... regards - FS
Click to expand...
Click to collapse
set up you bT via comm.manager. dont turn Bt on just choose set up bluetooth hdset device etc/ turn you cars bt on an make shure it is visible etc by keeping the on button pressed in while searching with your gsm and thats it i think thats how it worked 4 me and will work 4 every one too!!!
study your old rom be4 you use a new one and you will know how to recognize the differenzesss amen
I've experienced something similar with my volvo. In my case it paired sometimes and usually in a call it disconnected. This happened with all kind of roms. It all disappeared after a radio update.
Somebody mentioned 1.17... with rillphone 1.15... works like a charm!
Hope it helps
(else you can try to let a mechanic update the bluetooth software in your car)

PS3 keyboard on HD2

I had my PS3 keyboard working great on my topaz( same bt as HD2?). I was using an energy rom and I had to install BT_HID.cab file and it paired and worked great is was handy as hell. I could play galaga, Dial the phone from across the room, using ear peice, texting was wonderful,etc. All new roms I try on my hd2 (energy, kumar, mirri, elgoncia) non will allow paring of keypad.
The phone sees the keypad, starts to pair , the phone gives me a number to type in the keypad and the keypad leaves paring mode and an error occurs. I tried the bt_hid.cab file on all roms and still no luck. If I had it workind my HD2 would be perfect for me. I want to know if the bt from my topaz can be put on my HD2? or maybe the bluetooth manager? Any help would be greatly appreciated, and it doesnt seem to difficult because topaz and hd2 have same similar bluetooth stack and software if I am correct. It seems a lot of people would like this fixed or patched. I am going to write down what version of what works on topaz and start there. Please help me OBi Wan HaHA
stevem68 said:
I had my PS3 keyboard working great on my topaz( same bt as HD2?). I was using an energy rom and I had to install BT_HID.cab file and it paired and worked great is was handy as hell. I could play galaga, Dial the phone from across the room, using ear peice, texting was wonderful,etc. All new roms I try on my hd2 (energy, kumar, mirri, elgoncia) non will allow paring of keypad.
The phone sees the keypad, starts to pair , the phone gives me a number to type in the keypad and the keypad leaves paring mode and an error occurs. I tried the bt_hid.cab file on all roms and still no luck. If I had it workind my HD2 would be perfect for me. I want to know if the bt from my topaz can be put on my HD2? or maybe the bluetooth manager? Any help would be greatly appreciated, and it doesnt seem to difficult because topaz and hd2 have same similar bluetooth stack and software if I am correct. It seems a lot of people would like this fixed or patched. I am going to write down what version of what works on topaz and start there. Please help me OBi Wan HaHA
Click to expand...
Click to collapse
Not sure if this will help you , but other BT keyboards do work on the HD2 so, do not think it is actually an HID driver issue, I use an apple BT keyboard, and a Logitech DiNovo, both work very well ... I had one issue with the keyboard that was very close to what you see with yours, I took the batteries out of the keyboard overnight, it paired the next morning without a problem ....
Might help, might not ....
thanks
Thanks for the input. Tell me why there is a great number of people wanting tekosoft to adapt to broadcomm for Hd2 . Loads of people waiting for someting that worked great on my topaz. I have tried the reset button on the keypad. The phone spits out a 5 digit code and the pairing lights on keypad go out. I have tried lots of options. The bluetooth manager looks very different on hd2 than it does on topaz. Since the hd2 sees the keypad it seems like it might be easy fix since I have both phones to tinker with. What rom are you using?
Has anyone made any progress on this i would love to get this working on my hd2
if it pairs the same as the ps3 controller, this might be a workaround:
http://forum.xda-developers.com/showthread.php?t=689984

Categories

Resources