Hi,
I setup windows mobile device center for 32bit vista
But in bootloader menu the program shows the device is not connect so i can not install anything.Thanks for helps
There are no Vista compatible Upgrade_RUU.exe's for our beloved Prophet! Sorry but you must flash a ROM from Windows XP or earlier!
thanx
i found a link ;
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
but i can not work it.Is there anybody use this way ?
At the moment, it is not possible to flash a Prophet ROM using Vista.
thank you for helps animelover and l3v5y
Related
Hi,
i just paid for imei-check and im not running xp any more im running vista, hence no active sync i use mobile device center (part of vista)
as a result C3v1Unlock.exe cant see my connected XDA orbit device.
any ideas of a workaround for this ? other than going to an xp machine to do it?
Thank You
Update :
I go ttit to work by disabling windows firewall, it connects to my device now and reboots it, but then it says
"this unlocker works for Artemis devices only. Aborting"
any ideas ?
Thanks
inertiauk said:
Hi,
i just paid for imei-check and im not running xp any more im running vista, hence no active sync i use mobile device center (part of vista)
as a result C3v1Unlock.exe cant see my connected XDA orbit device.
any ideas of a workaround for this ? other than going to an xp machine to do it?
Thank You
Click to expand...
Click to collapse
the 4.2 version is incompatible with windows Vista, try the new 4.5 beta.
For your information Windiows Vista have built in the active sync module (look the mobile connection probram in side bar).
no, not found in Vista, I'll try the V2 probram of imei.check. This program ask me to attend if I'm Vista user (attend for 2 minutes for Vista install program), but I've attend for 5 minutes and my P3300 screen still blank!
I used imei check with vista and it worked perfectly first time - did you set a connection and sync the orbit with windows before you tried?
hi to everyone,
about a year ago, i patched thr spl...now is 2.13.0000. Yesterday i tried to install to my imate jamin (s200) the new qtek s200 italian rom. The process start successfully and cheked the version. When the phone reboot itself and shows the bootscreen, he program said that there was error 260 and cannot continue; on the phone screen reamin the boot section. When i try to rebbot, it works, but in this way i cannot update my phone. How i can solve this??
i use windows vista and windows mobile device center 1.0 version; also, i used on innotek virtual machine, windows xp with activesync 4.5I would like to inform you, if you can help, theat about a month ago i sent my phone to the assistence because the audio didn't work (is it possible that the assistence did something that block the update??
thanks and please help!!
on the bootscreen, compares RUU on the right-up side,ipl 2.13,spl 2.13 and (all writes are in the red section) and usb on the left-bottom side (on white background)! that's all, i think i've said everything...please HELP!!!
THE PROBLEM IS THAT PROPHET CANNOT CONNECT AT USB IN BOOTLOADER
i've tried, also, to use camera + softreset and when reboot the writes RUU disappear, but still not recognize on usb when in bootloader.
Someone can solve this problem? please....
your problem is vista!
use native windows xp and not VMWare or some Virtual Computer!
have the same strange errors if i flash with vista.
how you have flash your ipl to 2.13??
i used the pdamobiz...i think my ipl was 2.15.0000, and after downgrade, it becomes 2.13.0000. Sound strange? So, do you think the problem is vista and the VM? but i read in this forum that lots of people flash hos phone using xp on virtual machine....but you mean that in vista if you plug the phone (botloader) in to computer, windows doesn't recognize it?
i havent test "win xp vm" on a "vista host". my work laptop has vista and i cant update any rom/firmware. vmware use the host system and his driver to route the usb device. possible the usb-subsystem in vista is changed to much ;-)
test it ... if work ... ok ... we can debug it!
SOLVED
SOLVED! I flashed the prophet on "real" xp. Now my spl changed to 2.20.000 and ipl remain at 2.13.0000. I have another question: if i flashthe phone with one rom of wm6 (which is better?or which is the rom with less bugs?), can i reflash with a wm5 rom without problem?
thanks in advance and thanks for your advice!!
Could some1 explain me how the sync procedure works in Vista?
Do I need to install any software or is the sync sw already included in Vista?
I have downloaded the new version of AS for Vista, at least I think.... And now I have the usual AS icon in the taskbar, but if I plug in the device nothing happens. I have to go into Control panel and then run Mobile something (sorry I am writing from the office so dont remebmer) to have Vista connect succesfully with the device.
Thanks
re
thegios said:
Could some1 explain me how the sync procedure works in Vista?
Do I need to install any software or is the sync sw already included in Vista?
I have downloaded the new version of AS for Vista, at least I think.... And now I have the usual AS icon in the taskbar, but if I plug in the device nothing happens. I have to go into Control panel and then run Mobile something (sorry I am writing from the office so dont remebmer) to have Vista connect succesfully with the device.
Thanks
Click to expand...
Click to collapse
If not already have "windows mobile device centre" then download it newer version is 6.1 as i remember .. i had problem with connectivity .. turn off the fire wall .. it will connect
sahir74 said:
If not already have "windows mobile device centre" then download it newer version is 6.1 as i remember .. i had problem with connectivity .. turn off the fire wall .. it will connect
Click to expand...
Click to collapse
this is exactly what I installed: mobile device center 6.1
problem is that while with xp+active sync it was enough to connect the devoce to the usb and sync would start automatically, now after connecting I have to run the device center manually
try and get the latest version of wmdc, see if it helps
Try this http://www.microsoft.com/downloads/...f1-e46a-4a5f-a791-09f07aaa1914&displaylang=en
Hi guys,
I'm having problems with getting the USPL installation to get completed.
I've had a look the following thread
http://forum.xda-developers.com/showthread.php?t=312052&highlight=Vista
but the link in Step 6 seems to have been moved, so I don't know where to get the Vista to XP drivers.
Can someone please direct me to the drivers so I can finally unclock the Cid and get a new ROM on my Arte.
Thanks in advance!
i cant seem to find the old usb drivers for vista as well in order to solve the usb connection problem while flashing the rom.
can any pros around please provide some help with windows vista and the usb problem?
You're right, link in my old thread doesn't work.
This one should solve your problem:
http://forum.xda-developers.com/attachment.php?attachmentid=33662&d=1169888879
Non function dll in vista vs xp
Guys you're right that its not possible to update or flash on a normal way in Vista. Just use an old XP OS installed pc to do this.
Good luck
today i bought htc shift in shanghai. the rom have already been liberated.
but i cannnot connect wm to vista(shift's vista) who can tell me how to?
i am a starter. thank you!
You may flash new rom with HTC Shift Usb Tool installed (in that case HardSpl your device)
or install Usb tool to your current Rom
i have already installed usb tool.then what i should do next?should i install the activesync in vista? thank you very much
i succeed！ thank you！！
Chenjun, what did you do to connect, I am trying to make mine connect to Vista
install "window mobile center" in vista
and "usb tool" in wm
you can find it from here "www.dopod.com.cn“