Play Sky Force in NIKI - Touch Dual, MDA Touch Plus General

I played Game Infinite Dreams Sky Force in O2 Mini and ASUS P525, It's work and smooth. But when I played in HTC Touch Dual (Niki), the graph will not smooth (seems like memory is not enough).
Anybody have idea to handle this problem ??? Thanks

its the driver problem.
read more here:
http://www.htcclassaction.org/

After porting touch driver from Dopod S600 to touch dual, this problem will be solved. I can play it very well using the touch screen on my touch dual now.

please elaborate on how to do it Id love to solve this problem also!

you need to cook the rom your self.using the oem\oemdrivers\touch from S600 rom that I post here.

have you sent this to htcclaasaction.org? Theyve been trying to solve this problem for a long time.
Is rom the only solution? Cant i just copy the file or instal a cab? Im still a noob at flashinr ROMs :-(

That is a driver issue. I don't think it's a good idea to fix this issue using cab.
I attached the touch driver files here. You can cook and G'reloc your rom using this driver.

muzikfreakah said:
have you sent this to htcclaasaction.org? Theyve been trying to solve this problem for a long time.
Is rom the only solution? Cant i just copy the file or instal a cab? Im still a noob at flashinr ROMs :-(
Click to expand...
Click to collapse
htcclassaction.org *

alec_cy said:
That is a driver issue. I don't think it's a good idea to fix this issue using cab.
I attached the touch driver files here. You can cook and G'reloc your rom using this driver.
Click to expand...
Click to collapse
Hand how to relocate it with M'Reloc? When I start this tool and have chosen the touch.dll module, the "DoIt" button is grey! Oo
Cooking for Prophet was much more easier ...!

Touch Driver Dopod S600
"After porting touch driver from Dopod S600 to touch dual, this problem will be solved. I can play it very well using the touch screen on my touch dual now."
Could you share Touch driver (Dopod S600) ???
And how to use??? just copy??? to windows???
Thanks for share

alec_cy said:
you need to cook the rom your self.using the oem\oemdrivers\touch from S600 rom that I post here.
Click to expand...
Click to collapse
You don`t need to cook enything, and you dont`t need to flash your device.
Here my instrutions. If you will follow them it will be 100% safe for your p5500.
1. Make Backup of your system. I recomend you to use spb backup v2.0.
2. Install Resco File Explorer. (Not all versions can overwrite rom files, i used v6.10)
3. Go to the options and make all files visible. Also make Resco File Explorer to remember last folder (you will need these if something will go wrong)
4. Copy files from archive in any place on your device.
5. Install install_cert.cab
6. Install SDKSamplePrivDeveloper.cer like CAB file.
7. Copy touch.dll over ROM file to \windows\ folder .
8. Browse to \windows\ folder and close Resco Explorer.
9. Make Softreset
10. Be Happy!
if somting will go wrong, your touch screen will not response. In these case you need run Resco Explorer using a hard keys. It will open \windows\ folder for you. Find Touch.dll and remove it! It will restore original file! Make Softreset.
PS: Sorry for my English Good Luck!

Wonderful
Just tried to install the new driver with your instructions. Works great. I tested it with NFS, with the original driver it was unplayable because steering is made via touchscreen and so graphics went very slow. But now, simply great. Much thanks!

I found you~

Thanks dude! previously the screen would lag if i keep on touching the screen, i.e. playing SkyForce. But after the fix, seems that now the screen is smooth.

scoba said:
You don`t need to cook enything, and you dont`t need to flash your device.
Here my instrutions. If you will follow them it will be 100% safe for your p5500.
1. Make Backup of your system. I recomend you to use spb backup v2.0.
2. Install Resco File Explorer. (Not all versions can overwrite rom files, i used v6.10)
3. Go to the options and make all files visible. Also make Resco File Explorer to remember last folder (you will need these if something will go wrong)
4. Copy files from archive in any place on your device.
5. Install install_cert.cab
6. Install SDKSamplePrivDeveloper.cer like CAB file.
7. Copy touch.dll over ROM file to \windows\ folder .
8. Browse to \windows\ folder and close Resco Explorer.
9. Make Softreset
10. Be Happy!
if somting will go wrong, your touch screen will not response. In these case you need run Resco Explorer using a hard keys. It will open \windows\ folder for you. Find Touch.dll and remove it! It will restore original file! Make Softreset.
PS: Sorry for my English Good Luck!
Click to expand...
Click to collapse
Can you share with us the Resco explorer V6.10 please?

Tiago Machado said:
Can you share with us the Resco explorer V6.10 please?
Click to expand...
Click to collapse
http://www.resco.net/pocketpc/explorer/

Ok, I installed everything sucessfuly. But, It's not supposed the driver improves the system performance? It seems everything the same to me...

Great!! I'm a noob on cooking and gave up trying cook me a swedish rom months ago, this worked great. It's a joy using internet explorer and opera now, I'm truly fuzzed!
The whole device seems nippier also, but I dunno, might be the buzz from the smooth scrolling in IE that makes me see stuff that isn't there

scoba said:
You don`t need to cook enything, and you dont`t need to flash your device.
Here my instrutions. If you will follow them it will be 100% safe for your p5500.
1. Make Backup of your system. I recomend you to use spb backup v2.0.
2. Install Resco File Explorer. (Not all versions can overwrite rom files, i used v6.10)
3. Go to the options and make all files visible. Also make Resco File Explorer to remember last folder (you will need these if something will go wrong)
4. Copy files from archive in any place on your device.
5. Install install_cert.cab
6. Install SDKSamplePrivDeveloper.cer like CAB file.
7. Copy touch.dll over ROM file to \windows\ folder .
8. Browse to \windows\ folder and close Resco Explorer.
9. Make Softreset
10. Be Happy!
if somting will go wrong, your touch screen will not response. In these case you need run Resco Explorer using a hard keys. It will open \windows\ folder for you. Find Touch.dll and remove it! It will restore original file! Make Softreset.
PS: Sorry for my English Good Luck!
Click to expand...
Click to collapse
Why I can't install those files???? I try to install them but the installation failed...

no solution??

Related

I cant find my "Running Programs"

I just hard reset my magician. Since i'm using big storage (my friend did it), only some of the cab files from extended_rom are installed. Now i just found out that my smart dialing, MMS, O2 plus are not included. It was easy to recover those programs since i know the cab files.
However, i cant find the right cab for "Running Programs". Does anyone know which one? Thx.
Sorry for the bad language
Running programs - do you mean in Settings > system > memory > running programs?
If you need a task killer I can send you one or there's many around.
V
That's the one. Thx . So actually it's not a stand-alone program. Yes i found the running programs.
So, the question is changed now. I need the shortcut to that program. Usually magician has the blue box icon with a picture of someone running. Do you know the shortcut?
Thx.
Just tried to restore that icon from my old backup before it crashed. I thought it was just only a link to some program. But it is not! It is an exe file and after i restored it, click the Running Programs, it says "Error opening the shortcut or locating the target filename".
Any clues?
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
What does that file do? Just open up the running programs control panel?
If you need it back, just type the following into a text file on your PPC
Code:
22#ctlpnl cplmain.cpl,4,2
and save it as Memory.lnk
Then double click on that file.
Tell me if it works ok.
V
@vijay
i just wanna return my magician to the default system . that's why i'm so curious to get back that program.
@ampda
i'll try that file. thx for the info.
I can post my CAB file but it will also add the O2 xda defaults that can with the Aussie unit
ampda said:
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
Click to expand...
Click to collapse
Thats right....just install that cab file "default_103133.cab" and you will have your Running Programs app back....that is, if you saved your Ext ROM files before doing the Big Storage patch, or someone can attach that cab file here.
Now my problem is (sorry this might be Off-topic) , how can I have back the AUTOCONFIG for different Telcos, (especially Asian) ? Its also gone after the Big Storage patch. I dont know which of the cab files I need to have it back
anyone have idea or is there a forum for this in Magician?
thanks...
THANK YOU!!! finally i can access my running programs.
anyway, ive another question . let's say i want that program to be installed automatically after I hard reset. how can you do that? so i do not have to restore them manually from my sd card. thx.
dinoalbert said:
ampda said:
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
Click to expand...
Click to collapse
Thats right....just install that cab file "default_103133.cab" and you will have your Running Programs app back....that is, if you saved your Ext ROM files before doing the Big Storage patch, or someone can attach that cab file here.
Now my problem is (sorry this might be Off-topic) , how can I have back the AUTOCONFIG for different Telcos, (especially Asian) ? Its also gone after the Big Storage patch. I dont know which of the cab files I need to have it back
anyone have idea or is there a forum for this in Magician?
thanks...
Click to expand...
Click to collapse
To get the menu and icon run O2Auto.sa.CAB, then install the telco(s) you want to be in the autoconfiq menu.
@nsriza, thanks!!! As simple as this, and I can have my Autoconfig back already?
I thought I need to manually edit the autoconfig.txt to change the paths of the cab files?
Btw, I have already installed the cab files for all the Telcos that I need....but not the O2Auto.sa.CAB yet. Is it okay if I install that O2Auto then install again the Telco cabs?
Thanks...
So has anyone knew how to setup auto installation for cab files (eg. MMS, SmartDialing etc) after hard reset? thx
another OOT question...what does autoconfig.txt and config.txt do? and how to use it?
thx
Im assuming your asking for auto installation for after a hard reset using big storage. if you search for "AutoRUn" on this forum you should find a link on how to create an autorun folder on your storage card. you need the autorun.exe (Found in the search for the link) and a folder called 2577 created in the root directory of your storage card. then all you need to do is add all the CABs that you want to auto install after a HR to a ZIP (not Rar) archive and call that archive extROM.zip. then put that in your 2577 directory and hardreset and it will install all the files in the zip. if you havent already installed the cabs you put in the zip it will actually start installing them as soon as you insert the SD card. have a search around you will find lots of info about this subject.
SpeedN
@Speedn
thx for the suggestion. it's very helpful.
@rockafeller
hi i used big storage to convert my german rom (o2 xda mini) to wwe 1.12. now i lost some features like MMS,Smart dialling, Home zone control, O2plus. (as it was the case with you). It would be great if you could share here how did you get them back to work? i mean, i want the procedure to do so. i have a backup of my german rom.
one more question. i dont see the Phone pad option in my text input list after the bigstorage patch. how can i get it back. any suggestions would be so great..
thanx in advance
kk
@visvaram
if you backup ur extended_ROM, u should able to find related cab files, such as MMS**.cab, SMARTDIALING**.cab. Just tap those files and it will be installed automatically. FYI, backup ur cab files first b4 installing.
Im not sure about O2plus and zone files. Anyone care to help?

[SOLVED!] Any Language of WM5 on any Athena!

Hi guys, I just wanted to let you know that I have managed to translate 99% of all the WM5 interface to English or almost any language. The secret has been found long time ago by our friend Asukal: http://asukal.net/blog/
Some things like the battery panel, the soft keys on the Communication Manager are missing and others are not translated, maybe somebody can tell us how can we complete this work on the Athena.
Instructions:
1) Install ENG_mui.cab or any other desired language. Don't install ENG_Notifi_COM_BT or any other since they will change some settings.
2) Now you will notice that the Start Menu doesn't exist anymore! So go with the help of your keyboard to the File Explorer, go to /Windows and look for the folder on the Old Language that contains the Start Menu Folder, now rename it to: Start Menu. Then inside rename the folder that contains the Links to your programs to Programs and Create or Rename a Folder called Settings. All of them should be inside /Windows/Start Menu
The original work was made by our friend Asukal. Thank you very much for your hard work! And you can view the original post for the HTC Universal and the Languages Pack at http://forum.xda-developers.com/showthread.php?t=267541&page=2
you can download all the CAB's that Asukal made with a lot of different languages (some of them are not finisihed) at: http://buzzdev.net/components/com_s...les/UI_LNG_SWT_beta_20060629193323_Asukal.rar
Feel free to ask me any question, I will try to do my best!
I will try to post some screen shots later...
bogusiano said:
Hi guys, I just wanted to let you know that I have managed to translate 99% of all the WM5 interface to English or almost any language. The secret has been found long time ago by our friend Asukal: http://asukal.net/blog/
Some things like the battery panel, the soft keys on the Communication Manager are missing and others are not translated, maybe somebody can tell us how can we complete this work on the Athena.
Instructions:
1) Install ENG_mui.cab or any other desired language. Don't install ENG_Notifi_COM_BT or any other since they will change some settings.
2) Now you will notice that the Start Menu doesn't exist anymore! So go with the help of your keyboard to the File Explorer, go to /Windows and look for the folder on the Old Language that contains the Start Menu Folder, now rename it to: Start Menu. Then inside rename the folder that contains the Links to your programs to Programs and Create or Rename a Folder called Settings. All of them should be inside /Windows/Start Menu
The original work was made by our friend Asukal. Thank you very much for your hard work! And you can view the original post for the HTC Universal and the Languages Pack at http://forum.xda-developers.com/showthread.php?t=267541&page=2
you can download all the CAB's that Asukal made with a lot of different languages (some of them are not finisihed) at: http://buzzdev.net/components/com_s...les/UI_LNG_SWT_beta_20060629193323_Asukal.rar
Feel free to ask me any question, I will try to do my best!
I will try to post some screen shots later...
Click to expand...
Click to collapse
Thank you so much for sharing this information with us, good news !
Camera stopped working
The tweak works nice but camera application could not start. Will check further later. Meanwhile I have restored backup
I solved this by replacing /Windows/Camera.exe with one of the Camera.exe.* which size is 404 KBytes. Sorry but I can't remember the exact name.
victoradjei said:
The tweak works nice but camera application could not start. Will check further later. Meanwhile I have restored backup
Click to expand...
Click to collapse
bogusiano said:
I solved this by replacing /Windows/Camera.exe with one of the Camera.exe.* which size is 404 KBytes. Sorry but I can't remember the exact name.
Click to expand...
Click to collapse
where did you get the camera files from?
I got them from my /Windows directory they have been renamed by Asukal's translator. They have the extension: *.0404.mui
So the original file of Camera.exe (the one in Chinnese) has been renamed to Camera.exe.0404.mui, so once Asukal's CAB has been installed, rename Camera.exed to Camera.exe.old and rename Camera.exe.0404.mui to Camera.exe
In fact once you rename the working Camera.exe you will find a different Icon, like more "fashion". Hahaha!
faisal.husain said:
where did you get the camera files from?
Click to expand...
Click to collapse
Camera working now
I have the camera working now
I followed the instructions above, but before the procedure I created a folder on the storage card and copied all the file in the windows folder named camera for preservation
NB: I INSTALLED THE TWO CABS TO THE STORAGE CARD
ALL COPYING AND RE-NAMING WAS DONE WITH TOTAL COMMANDER
1. Ran the Language switcher cab and do a soft re-set.
2. May not be needed, but I started the switcher application and changed the language to English. Nothing changed of course
3. Installed the English mui and clicked ok for reset.
4. Copied all the camera files (4 of them, counting in Camera.exe.0413) to the Windows folder of device
5. Copied all content of the Windows sub-folders Start Menu and Programs from the old language Dutch in my case, to the new English folders.
6. Did same as in 5. for all the folders I wanted to re-name which would not take the new name
7.Camera works as normal, but I did not see the Microdrive to select in the initial settings. I believe that can be sorted with reg-edit or something else, but that is not important for me at the moment. Have not tested the front camera etc. I need to go and have a meal.
Am continueing to re-name the folders and checking the functions as I go along. Happy tweaking to all of you! Many thanks to Bogusiano and Wu.
Cheers
Very good! I am happy for you! I think this the closest we can get until a WWE ROM for the Dopod U1000 is released, for me at least, this is enough to enjoy my device meanwhile!
victoradjei said:
I have the camera working now
I followed the instructions above, but before the procedure I created a folder on the storage card and copied all the file in the windows folder named camera for preservation
NB: I INSTALLED THE TWO CABS TO THE STORAGE CARD
ALL COPYING AND RE-NAMING WAS DONE WITH TOTAL COMMANDER
1. Ran the Language switcher cab and do a soft re-set.
2. May not be needed, but I started the switcher application and changed the language to English. Nothing changed of course
3. Installed the English mui and clicked ok for reset.
4. Copied all the camera files (4 of them, counting in Camera.exe.0413) to the Windows folder of device
5. Copied all content of the Windows sub-folders Start Menu and Programs from the old language Dutch in my case, to the new English folders.
6. Did same as in 5. for all the folders I wanted to re-name which would not take the new name
7.Camera works as normal, but I did not see the Microdrive to select in the initial settings. I believe that can be sorted with reg-edit or something else, but that is not important for me at the moment. Have not tested the front camera etc. I need to go and have a meal.
Am continueing to re-name the folders and checking the functions as I go along. Happy tweaking to all of you! Many thanks to Bogusiano and Wu.
Cheers
Click to expand...
Click to collapse
bogusiano said:
I got them from my /Windows directory they have been renamed by Asukal's translator. They have the extension: *.0404.mui
So the original file of Camera.exe (the one in Chinnese) has been renamed to Camera.exe.0404.mui, so once Asukal's CAB has been installed, rename Camera.exed to Camera.exe.old and rename Camera.exe.0404.mui to Camera.exe
In fact once you rename the working Camera.exe you will find a different Icon, like more "fashion". Hahaha!
Click to expand...
Click to collapse
thanks M8 works a treat
I have WM 5 chinese edition, I installed the englsh mui, after that, the when i create a new sms, the sms application hangs. Therefore i am unable to create sms nor open smses.
Please help
thanks

Installing applications on phone...and T9 input .

I'm struggling... . I have my XDA hooked up to my Vista laptop and everything connects perfectly. Whilst browsing this site I found an iphone skin thing which looks quite impressive. I thought that I'd like to turn my XDA into an iphone so I'd download and install it... . Well, to be honest, I don't really know how to. Are there any idiot-proof guides out there for installing appliations...? I've downloaded the file to my desktop, tried copying it to my program files on my XDA (which works), but when I click on it, it just won't install. Is there some sort of file I need to click on specifically...? Is there a better way of getting this to work...?
Secondly I've been trying to find a T9 input thing. I hate having to use my stylus to send a quick SMS, and would love just to find something which replicates my phone's keypad on the screen, something I could use my fingers on, something on which I could type quickly. Does anyone have any suggestions...?
Thanks very much.
installing pocketpc applications can be don in many ways
2 most common is
1 a cab file which the user click on after transfering it to the pda
2 an exe file which requires to be run of the pc and it use the sync software to copy the cab file to the pda and run it
for t9 try doing a search for phonepad in the forum
not sure if it's compatible with old 2003 but you can give it a go
Thank you for your help! I downloaded this phone pad thing, extracted it from WinRAR to a folder on my desktop and had a look inside. There are no .exe files which I can run from my computer, and no .cab files which I could transfer to my PDA and run.
The first file is setup.xml and then it's a whole series of numbered files which Windows calls 001 file, 002 file, etc... . Any ideas about what I should be doing...? Thank you!
David333 said:
Thank you for your help! I downloaded this phone pad thing, extracted it from WinRAR to a folder on my desktop and had a look inside. There are no .exe files which I can run from my computer, and no .cab files which I could transfer to my PDA and run.
The first file is setup.xml and then it's a whole series of numbered files which Windows calls 001 file, 002 file, etc... . Any ideas about what I should be doing...? Thank you!
Click to expand...
Click to collapse
Rather than extract it, you might just want to check whether the phone pad thing itself isn't a .cab
i suspect it is think winrar can assi cabs with it iso files too so dont just look at the icon
Rudegar said:
installing pocketpc applications can be don in many ways
2 most common is
1 a cab file which the user click on after transfering it to the pda
2 an exe file which requires to be run of the pc and it use the sync software to copy the cab file to the pda and run it
for t9 try doing a search for phonepad in the forum
not sure if it's compatible with old 2003 but you can give it a go
Click to expand...
Click to collapse
Thank you friend :0 It helped me also, I was facing the same kinda situation
Thanks for all your post, I have the same problem and now it has been sorted!

How To Replace Long Press Power Button Shutdown App With PsShutXP

Orig title:How Do I Remap Power To An App On My Mogul
I want to replace my long press power button application with psshutxp. I tried to edit the registry, rename the link to long_press etc..., map key 00EC and nothing.. Need help...
I did download aebplus but it fights with the default shutdown app..
i'm running WM6.1 on my sprint mogul
Eazy
http://forum.xda-developers.com/showthread.php?t=398571
NotLutzik said:
http://forum.xda-developers.com/showthread.php?t=398571
Click to expand...
Click to collapse
Don’t do that to me.. Because I do contribute when I can.. and I actually have a fix.......
If you didn’t know you could have posted that.. Well here it is..
You need to do two things..
1. Save and zip the file called “PowerOffWarning.exe” from the windows directory
2. Go to the directory that has your psshutxp executable in it and rename the psshutxp.exe to PowerOffWarning.exe.
3. Zip the new “PowerOffWarning.exe” and skin files into a zip file.
4. Execute the zip file and overwrite the “PowerOffWarning.exe” file in the windows directory.
5. Press and hold your power button and enjoy your new shutdown/reset/screen off options.
NOTE: the only reason I choose to do it on long press is because I sometimes quickly want to turn off my screen when putting the phone back into the case. I don’t want to worry or wait for the app to come up and choose an option.
I have attached the two files and they came from a Mogul running WM6.1. If you use these files please backup your device first.
Eazy
maybe someone can create a cab for me please ;-)
mm with diamond don't go.. any ideas?
Great idea Eazy. I'll be waiting for a cab too...
On my hermes, there is no poweroffwarning.exe, so your solution will not work on all devices.
Just had a quick look at the running tasks, and the warning comes from gwes.exe, which is the 'Graphics, Windowing and Events Subsystem'
eazy2001x said:
Don’t do that to me.. Because I do contribute when I can.. and I actually have a fix.......
If you didn’t know you could have posted that.. Well here it is..
You need to do two things..
1. Save and zip the file called “PowerOffWarning.exe” from the windows directory
2. Go to the directory that has your psshutxp executable in it and rename the psshutxp.exe to PowerOffWarning.exe.
3. Zip the new “PowerOffWarning.exe” and skin files into a zip file.
4. Execute the zip file and overwrite the “PowerOffWarning.exe” file in the windows directory.
5. Press and hold your power button and enjoy your new shutdown/reset/screen off options.
NOTE: the only reason I choose to do it on long press is because I sometimes quickly want to turn off my screen when putting the phone back into the case. I don’t want to worry or wait for the app to come up and choose an option.
I have attached the two files and they came from a Mogul running WM6.1. If you use these files please backup your device first.
Eazy
Click to expand...
Click to collapse
Works fine on my Touch Pro.
And, if you use program like Resco Explorer, you can pass the ZIP routine, and go directly to overwriting the .exe .
works on my Trinity 6.1
very nice thank you!!!
jez83uk said:
On my hermes, there is no poweroffwarning.exe, so your solution will not work on all devices.
Just had a quick look at the running tasks, and the warning comes from gwes.exe, which is the 'Graphics, Windowing and Events Subsystem'
Click to expand...
Click to collapse
seems like you know your problem.. so run the app and make sure its the same app to shut down your phone then replace it following the process.. i never said that it will work on all devices hence the reason that i posted what phone i was using.. i am using it on my diamond as well..
if you need any more help let me know.. all i did was post a process that worked for me. if you need to use a diff exe please feel free to do so..
eazy2001x said:
seems like you know your problem.. so run the app and make sure its the same app to shut down your phone then replace it following the process.. i never said that it will work on all devices hence the reason that i posted what phone i was using.. i am using it on my diamond as well..
if you need any more help let me know.. all i did was post a process that worked for me. if you need to use a diff exe please feel free to do so..
Click to expand...
Click to collapse
I'm sorry, I certainly didn't intend to imply any criticism of your work.
For anyone else in my situation, unfortunately the gwes.exe is a vital process, which is always running, and does more than just the power off warning. As there is no standalone app for this warning in my rom, there is no exe which can be replaced.
I made a cab for the method stated.
PsShutXP_Replace.cab is just an automated way of Eazys method on the first page so check that first.
PsShutXP_Diamond.cab is the same method but with the VGA version and a diamond skin from lesteryh
Can this be undone if it doesn't work?
I think there's still the issue where it doesn't work right if you also use S2U2. not sure which ones at fault there.
Works fine on my Vogue running NSFAN's 6.1 Rom. I'm also running S2U2.
I dought the uninstall will work. If you want to go back then read Eazys post on page one and backup the file first.
eazy2001x said:
Don’t do that to me.. Because I do contribute when I can.. and I actually have a fix.......
If you didn’t know you could have posted that.. Well here it is..
You need to do two things..
1. Save and zip the file called “PowerOffWarning.exe” from the windows directory
2. Go to the directory that has your psshutxp executable in it and rename the psshutxp.exe to PowerOffWarning.exe.
3. Zip the new “PowerOffWarning.exe” and skin files into a zip file.
4. Execute the zip file and overwrite the “PowerOffWarning.exe” file in the windows directory.
5. Press and hold your power button and enjoy your new shutdown/reset/screen off options.
NOTE: the only reason I choose to do it on long press is because I sometimes quickly want to turn off my screen when putting the phone back into the case. I don’t want to worry or wait for the app to come up and choose an option.
I have attached the two files and they came from a Mogul running WM6.1. If you use these files please backup your device first.
Eazy
Click to expand...
Click to collapse
It works!
Many thanks!
Anthony2oo5 said:
I made a cab for the method stated.
PsShutXP_Replace.cab is just an automated way of Eazys method on the first page so check that first.
PsShutXP_Diamond.cab is the same method but with the VGA version and a diamond skin from lesteryh
Click to expand...
Click to collapse
Hey.. Can I ask you to change up how your cab works.. Just to make things easy.. I have not ventured into how to make cab's yet but will soon..
User:
Install PsShutXP (QVGA/VGA)then run the (not yet created) cab
Your cab:
create a directory under \program files\PsShutXP called Backup
create a directory under \program files\PsShutXP called modfile
copy \Windows\PowerOffWarning.exe to \program files\PsShutXP\backup
copy \program files\PsShutXP\PsShutXP.exe to \program files\PsShutXP\modfile\PowerOffWarning.exe
copy program files\PsShutXP\modfile\PowerOffWarning.exe to Windows\PowerOffWarning.exe and overwrite the file.
copy \program files\PsShutXP\*.gif to \Windows\
and on your uninstall
copy \program files\PsShutXP\Backup\PowerOffWarning.exe to \Windows
This will allow the user to uninstall the program if needed.
I am also using that skin on My Touch pro but removed the text up top that says Touch Diamond.
If you could create that cab it would be greatly appreciated. Until then everyone can just follow the manual process..
Working Devices so far:
Mogul 6.1
Touch 6.1
Touch Pro 6.1
Touch Diamond 6.1
Vogue 6.1
Trinity 6.1
jez83uk said:
I'm sorry, I certainly didn't intend to imply any criticism of your work.
For anyone else in my situation, unfortunately the gwes.exe is a vital process, which is always running, and does more than just the power off warning. As there is no standalone app for this warning in my rom, there is no exe which can be replaced.
Click to expand...
Click to collapse
I'll help you out.. I don’t think gwes.exe is the right file for you to be looking at.. How about this.. It seems that when you hold down your power button you get the same type of power off warning box that we do.. How about you go into your windows directors and sort by exe. Then start clicking on each exe until you see the warning box pop up and then you will know which file shuts down your phone. That’s how I found the PowerOffWarning.exe file. Please report back...
There's a thread over at ppcgeeks that I can't find right now, but it said to just copy the psshutxp.exe and paste a .lnk in \Windows\. Then you rename the "psshutxp.lnk" to "Long_Power.lnk". This method doesn't overwrite any exe's and works like a charm on my Touch Pro.
at the time that did not work on my mogul.. if it is working for you then your good.. if it works for anyone else then they dont need to use this process.. i have not tested that on my diamond pro since this worked for me.

.cab files

I just put Kumar's v 2.0 custom flash on my phone and want swype on it. I downloaded the .cab file but have no idea what to do with it. Do I just extract it into my Custom RUU folder and re-flash it with the cab files in there?
No, you sync your phone with your pc and open your flash memory,then drag and drop the cab into it. Then explore it on your device with File Explorer and install it from there.
I think this should be moved to General
Excellent, thank you
otter5 said:
Excellent, thank you
Click to expand...
Click to collapse
No problem

Categories

Resources