Hi,
Question is the title. How do I do this?
Some devices allow this but I can't see how to do this with the touch.
Thanks.
LIP
It's set in the contact record itself. Edit the contact, and you'll see a line for the ringtone.
lip said:
Hi,
Question is the title. How do I do this?
Some devices allow this but I can't see how to do this with the touch.
Thanks.
LIP
Click to expand...
Click to collapse
You can also try Ringo Mobile if you want each assigned contact to have a specific sms tone & ringtone.
Thanks all.
Ended up setting my wife's phone number to "Warning Warning...it's the Wife...Warning Warning...it's the Wife!"....ha-ha
Everyone gets a laugh at that.
Regards,
LIP
Related
I had a Palm software phone (Treo 600) before my current MDA Compact and the Palm had two programs that i cannot seem to find for this PocketPC, can anyone suggest a program
1/ a Call filter, one that does not pass the calls onto the voicemail a filter that will pick up and drop. The Parm one when you had a blocked call it sounded to the caller that they had been cut off, i have been given SmartFilter but you just end up with lots of voice messages.
2/ Was a SMS response program once set if you recieved a text it would make no sound but would send a reply with a message you had set.
as said two usefull program that i cannot find for PocketPC, have i missed then if so can anyone please tell me the names.
Better still PM to me
thank you
1. Bad begining : No said Hello
2. What about SEARCH
3. http://forum.xda-developers.com/viewtopic.php?t=21443&highlight=
Any way , click on that link and you will see one of the programs that you can use, but as said, do a search and you will get a lot more answers.
Cheers mate.
User22 said:
1. Bad begining : No said Hello
2. What about SEARCH
3. http://forum.xda-developers.com/viewtopic.php?t=21443&highlight=
Any way , click on that link and you will see one of the programs that you can use, but as said, do a search and you will get a lot more answers.
Cheers mate.
Click to expand...
Click to collapse
Sorry "Hello" i was tired .
thank you i did a search but got a page full and was too tired to go through everyone.
Next time i will search harder and there was no need to shout.
Hi again. I think that you must give a try to that program,because it is doing very well the job that you are specting.
Cheers.
User22 said:
Hi again. I think that you must give a try to that program,because it is doing very well the job that you are specting.
Cheers.
Click to expand...
Click to collapse
I have tried that program and it looks very good but is restricted to only 10 numbers from your contact list. I will keep my eye on this program but as said so far it looks very good.
pr1uk said:
I had a Palm software phone (Treo 600) before my current MDA Compact and the Palm had two programs that i cannot seem to find for this PocketPC, can anyone suggest a program
1/ a Call filter, one that does not pass the calls onto the voicemail a filter that will pick up and drop. The Parm one when you had a blocked call it sounded to the caller that they had been cut off, i have been given SmartFilter but you just end up with lots of voice messages.
2/ Was a SMS response program once set if you recieved a text it would make no sound but would send a reply with a message you had set.
as said two usefull program that i cannot find for PocketPC, have i missed then if so can anyone please tell me the names.
Better still PM to me
thank you
Click to expand...
Click to collapse
hi there fellow Bristolian !!!
try http://www.novomobile.com/smartfilter.php versions for both smartphone and pocket pc......... absolutely brilliant product.... i use it on holiday to allow only REALLY essential calls through and to divert all the others through to my office
give it a try
regards
boyo69 said:
pr1uk said:
I had a Palm software phone (Treo 600) before my current MDA Compact and the Palm had two programs that i cannot seem to find for this PocketPC, can anyone suggest a program
1/ a Call filter, one that does not pass the calls onto the voicemail a filter that will pick up and drop. The Parm one when you had a blocked call it sounded to the caller that they had been cut off, i have been given SmartFilter but you just end up with lots of voice messages.
2/ Was a SMS response program once set if you recieved a text it would make no sound but would send a reply with a message you had set.
as said two usefull program that i cannot find for PocketPC, have i missed then if so can anyone please tell me the names.
Better still PM to me
thank you
Click to expand...
Click to collapse
hi there fellow Bristolian !!!
try http://www.novomobile.com/smartfilter.php versions for both smartphone and pocket pc......... absolutely brilliant product.... i use it on holiday to allow only REALLY essential calls through and to divert all the others through to my office
give it a try
regards
Click to expand...
Click to collapse
I have a copy of Smartphone and yes it is good except if anyone calls you and they are blocked it goes straight to the voicemail. So i ended up with voicemails, i think a really good call filter should except the call (silently) and just hang up. Smartphone is good but could be better if it picked up and dropped the unwanted calls instead of pointing them to voicemail.
not quite true
it takes it's divert from the phone 'busy' setting.... I think the default is voicemail on busy, but in the phone settings, you can specify another number other than voicemail... I put in my office number....go to the phone application and then the 'call divertl settings
not sure what you mean by pickup and hangup....sounds a bit rude really to the poor caller!
I don't get what you want?
You want the phone to receive a call, and then just hang it up?
V
vijay555 said:
I don't get what you want?
You want the phone to receive a call, and then just hang it up?
V
Click to expand...
Click to collapse
What i am after is simple, work ring me weekends and using Smart Filter i end up with a load of vorce mails i dont want that. Now Call Filter when you choise a number to ignore just hangs up No Call and No Voice Mails - Great. I will be glad when he has finished the program as its grippled to only 0 numbers from your phone book at the moment.
I don't know how difficult it would be to build this as I'm not a programmer but would it be possible to create a cab file that would fix this WM6.1 feature (in my opinion BUG) where the Call Log is automatically set to Missed Calls?
It's really annoying. Even afer selecting All Calls the next time I access my call log it's back to Missed Calls again.
I did a search on here and on the net and didnt find anything like this.
This would be really appreciated!!!!
THANX!!!!
I don't have this issue, what ROM are you using?
The official HTC provided 6.1 upgrade for Tytn II
Am I the only one experiencing this annoying feature?.... Or I'm probably the only one using the official HTC Tytn II ROM !!!
Sigh.....
How are you opening the call log?
Mexy said:
Am I the only one experiencing this annoying feature?.... Or I'm probably the only one using the official HTC Tytn II ROM !!!
Sigh.....
Click to expand...
Click to collapse
Did you ever get a resolve for this. I have this problem as well with my HTC Touch P3450, running 6.0. however standard it works, only after installing spb mobile shell does mine default to missed only not all in the filter
i'm using ATT official 6.1...same problem
I even made sure that in the registry it was set to all calls...same problem!
TheChampJT said:
How are you opening the call log?
Click to expand...
Click to collapse
I open the call log from the today screen - HTC Home.
Mexy said:
I open the call log from the today screen - HTC Home.
Click to expand...
Click to collapse
That's probably the reason then. The shortcut on HTC Home points directly to missed calls because it's where the missed call counter is displayed. Try opening the log from the dialer, it should work there. Hopefully it does, then you can load the Call History .exe file floating around here and make a shortcut to that.
TheChampJT said:
That's probably the reason then. The shortcut on HTC Home points directly to missed calls because it's where the missed call counter is displayed. Try opening the log from the dialer, it should work there. Hopefully it does, then you can load the Call History .exe file floating around here and make a shortcut to that.
Click to expand...
Click to collapse
Well apparently Call History from the dialer does show me all calls, but this must be a 6.1 bug because in WM6 I could access all calls from the today screen.
Sigh!!!
Hey! I am having the same problem and couldnt find a solution in the Elf section... I just upgraded to 6.1 with a htc touch from sprint, and while before the "missed calls" tab on the today screen would display all calls - missed, in, and out, by default, now it only shows missed calls. You can access your call history via the call screen, but thats an extra step that wasnt there before... any solution to getting that "call log" button on the today screen to show a complete call history instead of only missed calls?
navogel said:
Hey! I am having the same problem and couldnt find a solution in the Elf section... I just upgraded to 6.1 with a htc touch from sprint, and while before the "missed calls" tab on the today screen would display all calls - missed, in, and out, by default, now it only shows missed calls. You can access your call history via the call screen, but thats an extra step that wasnt there before... any solution to getting that "call log" button on the today screen to show a complete call history instead of only missed calls?
Click to expand...
Click to collapse
Hope springs eternal.....
Does anybody know where
This will be moved to the Q&A section
,,and where is in the Q&A section?? i've got a same problem,, i want to see ALL calls on the phone screen!!! any solution??? registry hack or some other?? thanks,
Good day, all
I am not knew to the board. But, i am knew to posting. i have a slight problem. i set my ring tone for each contact. but, it still play the ringtone that is set for the phone. my phone is not recognizing the ringtone for the contact. if, i am making any sence here.. Is there something I am doing wrong? Or, is this a technical issue that maybe tmobile needs to address?
Sorry i meant NEW, Not KNEW..LOL!!
are these contacts in ur myfaves
They are all contact. My Fav's and regular (non my fav's ) contacts..
mywing4me said:
Good day, all
I am not knew to the board. But, i am knew to posting. i have a slight problem. i set my ring tone for each contact. but, it still play the ringtone that is set for the phone. my phone is not recognizing the ringtone for the contact. if, i am making any sence here.. Is there something I am doing wrong? Or, is this a technical issue that maybe tmobile needs to address?
Click to expand...
Click to collapse
are you assigning them to contacts saved to your "phone" instead of your "sim"?
spacemonkey333 said:
are you assigning them to contacts saved to your "phone" instead of your "sim"?
Click to expand...
Click to collapse
Yes, that's the only way it will allow me. but, it's not playing the ringtone for my contacts.. I don't know. i gave up.. LOL!!
mywing4me said:
Yes, that's the only way it will allow me. but, it's not playing the ringtone for my contacts.. I don't know. i gave up.. LOL!!
Click to expand...
Click to collapse
make sure that the numbers that are saved as contacts have the area code in front of the number. if the incoming call has an area code in front of it and your stored contact does not, then your phone may see them as two separate numbers.
spacemonkey333 said:
make sure that the numbers that are saved as contacts have the area code in front of the number. if the incoming call has an area code in front of it and your stored contact does not, then your phone may see them as two separate numbers.
Click to expand...
Click to collapse
Ohhh okay.. Well, you are right, they are showing as two separate numbers.. let me change that now and see how it works.. Thanks
Whenever I go into call history, by whatever means, it seems that I always get a filtered call list.
I'm used to this being the case when I view missed calls, from my previous WM devices, but when I enter call history from the dialler screen I should get a full list, but I get either outgoing calls only, or incoming calls only. I can't see any options to change this behaviour. (I know I can select the filter in the right softkey menu, but it's a pain to do this every time.)
Ideally I'd like to never, ever, see a filtered list.
Does anyone know of any solutions to this?
Is no-one else having this problem?
Resco Contact Manager
Install Resco Contact Manager.
http://www.resco.net/pocketpc/contactmanager
Yes, I too have this problem and would like a solution...
jrg1967 said:
Yes, I too have this problem and would like a solution...
Click to expand...
Click to collapse
Me as well. it is very very very annoying. When I click on it it goes straight to outgoing calls. I will see if I can find something in the registry...
i have the same problem and it drives me really crazy! Has somebody find a solution meanwhile? Maybe a registry fix or any other solution?
many thanks in advance,
Hakamuri
Hey guys,
I once had a program which I could block anonymous phonecalls automaticly with, but now I can not find that program and neither the name of the program. I found a program called "BlackList" but it does only support blocking ALL phone calls or just a black/white-list. So that is not what I am searching for...
Hope someone can help me out
Tried this?
Call Firewall
emwdava said:
Tried this?
Call Firewall
Click to expand...
Click to collapse
the problem with that program is that it rings once, and then stops the phonecall so you still get bullied
on a previous winmob phone I managed to get a witheld number to save as a contact with a silent ringtone (2 seconds of blank ringtone). Worked rather nicely. haven't tried it on the TP2 yet, but then not many folks know the new number yet
RogerStenning said:
on a previous winmob phone I managed to get a witheld number to save as a contact with a silent ringtone (2 seconds of blank ringtone). Worked rather nicely. haven't tried it on the TP2 yet, but then not many folks know the new number yet
Click to expand...
Click to collapse
excuse me, my english is not perfect but what is a 'witheld number'? does that mean you added a contact in your phone without a number as the phonenumber??
MagicCall is really good!
doktor_ppc said:
MagicCall is really good!
Click to expand...
Click to collapse
Restriction: 10-day trial
im not willing to pay $25
or can u help me with a pm