Hi, have a problem on my xda2, my screen keeps on blinking and flickering, its like there's a cricket sound. my speaker also does not work.
it just happend while i was playing.
can you help how to resolve it or do you know any tech person that diagnose or repair it.
thanks.
den
my unit was fixed already, they said that its the mainboard that has a problem, and it will cost 35 thousand pesos if there's no warranty.
i'm just curious, can anybody tell what causes this problem.
according to the repair center, it can be cause by a corruption of a file or the rom (is it rellay possible?)... or if the unit is inside a tight pocket always.... or the unit was wet by moisture.
guys, i need your inputs before i do something with my unit, just confused a bit coz i want to upgrade my xdaII himalayan to wm2003se by xda2jojo version.
thanks in advance
I would try hard reset and removal of battery first. If that doesnt help I would flash with a standard rom.
flash it with 1.72.00 WWE original ROM,try it since u have nothing to loose(u already have no warranty) :wink: ,then if the problem persists,take it to the service center(if it's a hardware issue)....good luck
hi there
well i have a cingular 8125 with lcd disalignment problem...
so, i crawled this forum and searched for a possible solution but i didnt find it..
so im asking the ones who hve the exact problem as me, how they solved the problem if: the thumb pressure, putting things beneath lcd, releasing screws, flashing to older ROMs and getting another Wizard etc etc etc-didnt work?
i had this problem too at my k-jam.
i flash new rom and now it's ok....
yes, i highly recommend u to change other roms, coz i had this problem before, then i flash another rom, and it works, at least up to now
Hi to all.My name is carlos and im a long time user of pda and windows mobile.I cant go back to nokia again,-im hooked!!!My question is-i have opened my S200 and a litle rubber pieçe has fell from the interior and i dont know were is his plaçe.Anyone has a lue were is the plaçe of this litle fellow?
anybody??
hi again.My s200 has the windows mobile pro vincent rom 7.0.0.7 and i must say its the best ive seen.Again ia litle help in my problem is welcome sinçe i dont know were that pieçe of rubber bellongs.all the mecanic parts are allrigh but mi fear is that ruber is for protecting some sensitive chip inside the phone.Ive instaled the messenger has been provided by one of the threads above and it works fine.
Any help...please
carlos
Noboby´s home?
it doesnt protect any vital chip, i would have seen that as i have totally dismantled mine before.
i think it was something to do with voulme slider but its been over a year since i took my prophet apart lol so i cant remember.
if it works and nothings different then is it a problem? its always a bummer when you have a "screw or bolt" left over isnt it
Hi.thank you for your response.In reality,is all working so i dont go on dismantling the phone to put the pieçe in plaçe sinçe this isnt as easy to deasemble as a nokia.Deasembling this phone is a tricky job and i may end with a broken phone.
wish you well to you all.
my hermes100 is having a problem... some body please help........
its
hermes100
IPL-1.01
SPL-1.06
bought it from melbourne.
The problem is every program is closing itself. and battery status icon message is shown. we cannot open any programs... battery status message is coming and coming...its like a virus or something...i hard reset it... and i flashed the spl to hard SPl V7 .. then i flashed it with 20758.MS3Gwvoip+office ROM. but the problem still exist..i also tried some other roms like rev m2d and rev lite ROMS... but no use.... the problem still exist.....i am not used to this forum.. and i was unable to find a solution.....sorry for using a new thread..... please provide a solution or provide a link....
Thanks in Advance......
If it's displaying the battery message, your battery might be on it's way out.
How does it do while plugged in?
Is the charging lite red or amber? red=bad
when plugged in also its showing same error..... now i flashed it with Schaps_WM6Pro_Hermes_4.31_WWE_Full and the error display is gone,.. but problem still exist...... i cant even open one single app for more than 30 seconds..its closing automatically.........In landscape mode... the start menu is getting pressed again and again.........i tried flashing a stripped ROM then a full rom... but no use... problem still exist....
this is actually my friends phone... he gave it 2 me 2 flash it beacause he was having this problem for the last few days... the ROM when i got it was wm5 original ROM.... he bought it from melbourne...now its in india.... is it with the RADIO or something.....??? and i am not that used to this phone..please help...
Now after continuos flashing when flashing a ROM ...its gtting stucked in the scrren alignment procedure...what to do????
Your screen is stuck in the top right corner. Try to see if there's some dirt there (maybe stuck between display and casing).
Either thay or the digitizer is gone... I believe the Hermes was dropped and the digitizer damaged at that point. Thats why it was sold. It has a point being repeatedly pressed. You'd have to replace the LCD and digitizer together.
Hey man, sorry to hear about your hermes.. those things are usually tough as nails and can take a beating.. anyways..
I moved your thread out of the mobile 6 thread and into the general thread where it shoud be.
Peace,
Josh
thanks alll...... i gave it to a HTC service centre...told them to clean the space under the display.... let us see....... any way thanks to all........
Dear try to change the battrey if same problem then it have a hardware problem try to get it repair
This issue has been covered many times before - though it is probably buried amongst lots of screen alignment and digitizer threads.
Applications close
Start Menu appears
Depending on whether you are in portrait or landscape.
It may be the screen is getting pressed, and this was thought to be the cause when the problem was first seen. However I do not believe it's a simple case of cleaning under the bezel. Erratic digitizer behaviour is now generally attributed to the digitizer connections, the lcd to d'pad flex cable or poor chip contacts on the d'pad board
Mike
Hello
First i would like to mention that i went thru wiki and the forum and i could not find a thread with similar problems.
The problem is in the built in camera (or in the user)
As soon as i turn on the camera to take a picture it doesnt work. On the display the icons are showing like the camera is ready but it is just dark display.
So i pressed the button to capture an image just to see how will the camera react. As i pressed the middle cursor button after some 20-30 second on the display appeared following lines:
Unable to save captured image
unable to get data from camera device.
36003:500:2
I must say that i have problems with the camera module from the very beginning. I was hoping that the latest flash with Tomals SW will improove the camera drivers but this was not the case. Maybe i have to install some additional drivers? I just cant get the bloody camera to work.
Anyone has some idea why my camera does not work?
Besize that my qtek is working just fine.
Thanks 4 the answers.
Best regards from Slowenia.
Peter
Welcome to forums
I had a similar prob and solved changing the ROM
Good luck,
Hello orb3000
Thanks 4 the welcome
i upgraded my rom just 2 days ago with: TML871_WM61_21028_REGULAR_128MB.exe
but it does not change the status of the camera.
so i feel a little helpless
Peter V8 said:
Hello orb3000
Thanks 4 the welcome
i upgraded my rom just 2 days ago with: TML871_WM61_21028_REGULAR_128MB.exe
but it does not change the status of the camera.
so i feel a little helpless
Click to expand...
Click to collapse
Try another ROM, just in case. Generally a factory ROM would give a good indication of whether there is a problem and eliminate other possibilities. So I would recommend flashing it just for your peace of mind.
As far as Tomal's ROM is concerned, provided your device is 128Mb and ROM functions as it should otherwise, one of the reasons for non-working camera is the module itself or the mainboard. Hopefully its the camera module, as they are relatively cheap and very easy to replace and no special knowledge is required, as well as minimal device intrusion, so you will be able to replace it yourself. I think i saw the camera module at some of my suppliers, let me check if still available, alternatively, a working second hand part can also be used, I might have one in my toy box somewhere.
Thank you so much. I will yet again update the rom and than i will report how it went. So if it doesnt work, i would be happy to purchase a camera module from you. Replacing it will not be a problem as i have no problem with the mechanics and electronics in general :-D:-D:-D
I also stumbled upon a DIY side in this forum, regarding the universal.
So which rom would you recommend me?
Thanks
:-D:-D
Peter V8 said:
Thank you so much. I will yet again update the rom and than i will report how it went. So if it doesnt work, i would be happy to purchase a camera module from you. Replacing it will not be a problem as i have no problem with the mechanics and electronics in general :-D:-D:-D
I also stumbled upon a DIY side in this forum, regarding the universal.
So which rom would you recommend me?
Thanks
:-D:-D
Click to expand...
Click to collapse
Factory ROM is the ROM your device came with originally, out of the box.
Peter V8 said:
So which rom would you recommend me?
Click to expand...
Click to collapse
WM 5... as Uni came in with WM 5.... so in my case JASJAR.. and T-Mobile rom... is factory default for my 2 uni....
That could be a problem.
i have been given the qtek 9000 by my boss as he bought himself a tuch diamond pro and he gave me the qtek becouse he knew that i was so enthused about it. :-D:-D
Sadly the PDa came without any CD so factory rom is out of question. He somehow lost the CD so all i had was the phone, the usb cable and the charging unit.
try the wiki first!
http://wiki.xda-developers.com/index.php?pagename=Universal_Upgrades
Otherwise, someone may have it. (I've got SPV M5000 if you're interested)
The wiki has only the country or operator specific downloads. Since i`m from Slovenia there is no operator or SW for our operator on the list.
So i probably need an english version since the qtek in our country c<me only in english version.
Just get WWE for QTEK, or try other WWE ROMs. BUT make sure you have the Slovenian settings on a .CAB or check if they can be sent by your provider.
Peter V8, don't forget to update the wiki if you find what you were looking for... and it wasn't in the wiki. 30 people will (not) thank you, but appreciate it.
As soon as i find the problem i will update it to wiki no problem. If the camera is broken and it need to be replaced i will document the procedure with photos that i will take during the "operation".
Sadly my battery bloated a little bit (no chemical spill so far ) and i took it out of my qtek to protect it from damage. So now i am stuck with nokia N90 until the new Battery arrives that i ordered. So when i will have the new accu i will find the error that the camera is having and report it to wiki and forum.
Peter V8 said:
As soon as i find the problem i will update it to wiki no problem. If the camera is broken and it need to be replaced i will document the procedure with photos that i will take during the "operation".
Sadly my battery bloated a little bit (no chemical spill so far ) and i took it out of my qtek to protect it from damage. So now i am stuck with nokia N90 until the new Battery arrives that i ordered. So when i will have the new accu i will find the error that the camera is having and report it to wiki and forum.
Click to expand...
Click to collapse
A battery 'bloated a little bit' means it got wet, which might mean liquid damage to your device and the reason your camera might not work. Even if you replace the battery at this stage, if the main PCB got wet, it will corrode and your device will die, slowly, but surely.
I am fully aware of this problem, but the new battery bloated (i replaced it 3 months ago) and the camera doesnt work since i have the qtek (1,5 year). The little white paper stripe under the sim card holder didnt turn pink and also the battery isnt wett also the phone is not wett. Well we will see when i get the new battery. It is under warranty so if the battery damaged my beloved phone, the company that sold me the new battery 3 months ago will not get so easy of it. Here in Slovenia a well preserved qtek 9000 still costs arround 250-300 Euros.
A little update:
I bought myself a newer working qtek 9000 with partialy broken LCD for 30 Euros. So i placed the battery into my qtek and it works perfectly. Apart from that i am still waiting for my brand new battery to arrive from germany. So i fully charged the spare battery, did a DOC reset and flashed the qtek with Tomals ROM.
The camera however still doesnt work, so it is not a SW problem. Since i have bought the broken qtek 9000 for spare parts, i will take the camera out and replace it. So probably this weekend i will do the "service" and i will take pictures of the procedure and update the forum.
Peter V8 I also face a similar problem since my 2 days Ebay bought 02 Xda Exec's camera is full of white, red, green dots either in photo or video mode. Changing roms didn't help at all and its truly a pity since the phone seems like it came straight from the factory, although used. My dilemma is either paying about 20 Euros to ship it back or waiting for your endeavor to complete but since I overall truly like the phone I will wait and see
Peter V8 said:
A little update:
I bought myself a newer working qtek 9000 with partialy broken LCD for 30 Euros. So i placed the battery into my qtek and it works perfectly. Apart from that i am still waiting for my brand new battery to arrive from germany. So i fully charged the spare battery, did a DOC reset and flashed the qtek with Tomals ROM.
The camera however still doesnt work, so it is not a SW problem. Since i have bought the broken qtek 9000 for spare parts, i will take the camera out and replace it. So probably this weekend i will do the "service" and i will take pictures of the procedure and update the forum.
Click to expand...
Click to collapse
There is really no procedure worthy of taking pictures, once you remove the back, remove the large white antenna part and you will see where camera clips in. It's a fairly straightforward flex clip connection.
Little update again.
As i mentioned earlyer, i have bought myself another spare parts uni with broken tft. Ok so first.....i took apart both unis (didnt took no pictures becouse the pdf DIY to disassemble and assemble the UNi is more than helpfull, so you have to be a complete non technical type of human, or you have cerebrall palsy, or you must be a dee tii deee to not understand or grasp how it is made) and puted the tft from my uni in to the spare part uni. It worked perfectly and it had WM 5,0 the original. So the camera worked , everything worked-sim card....everything. So yesterday i flashed the uni with Tomals last ROM (Tommal the rom is working perfectly on my other uni so the SW is just fine) And somehow the uni had problems to work when my SIM card was inserted. So i removed the sim card and the uni worked perfectly. I dont know wath the problem is (probably a sim lock or somethin, but odd enough it worked with WM 5,0) so as the forum was down yesterday, i just dissasembled both unis again, putted the tft back in to my uni and putted the camera which worked just fine in the spare parts uni, in to my uni. And guess what.............the camera is still not working. I have done the hardreset but still.........even as i replaced the camera i still have the mesage......unable to get data from camera bla bla bla.....error 36003:500:2
So there might be a problem with some drivers or something in that way. I am pretty on the end with my knowledge now. How can i find the erorr or the couse of it???
If someone knows i would be very happy uni user :-D
So the problem is still not solved. Otherwise the uni is working perfectly only the camera gives me hard time.
Best regards
Peter
Peter V8 said:
If someone knows i would be very happy uni user :-D
So the problem is still not solved. Otherwise the uni is working perfectly only the camera gives me hard time.
Click to expand...
Click to collapse
seems like the problem is with motherboard rather than the camera...