Related
When I put my Hima to the cradle I just hear the ... sound(it's 3x that sound in XP when is any new hardware connected via USB). Then it does nothing. The AS connection should be established. Please how to solve this big problem?
has a network connection for the device been established ? Look in
start --> settings --> network on the pc
???
No. As I wrote it does absolutely nothing. Only the ... sound is playing and that's all. What kind of established network do you mean?
communication with pc and pda is done through a network connection since AS4. Maybe a firewall is blocking it ?
Maybe...
...you're right. But 1 hour ago I was running on Diamond and there was no problem...
hmm, maybe it's just magneto that uses the network interface then
also use AS4 build 4328. People say it works better than 4343
...
I am using ASync 4 build 4328. Tried also reinstall it but unsuccessful. [/i][/quote]
...
The ... sound is the 'Windows XP Hardware Fail.wav' that I have assigned to 'Device Failed to Connect' event...
maybe try another USB port ?
...
Doesn't help. I have started the PC's Device Manager and I have noticed that one Device is appeared in 'Network Adapters' folder:
Generic RNDIS (PROTOTYPE--Remember to change idVendor)
and :!: is displayed by this adapter(it's not working properly).
When I disconnect the device it disappears.
Maybe I need some drivers?
Or what does this mean:'Remember to change idVendor'?
...confused...
Re: ...
Or what does this mean:'Remember to change idVendor'?
Click to expand...
Click to collapse
mine says the same except it is working and the adapters name is: windows mobile based device
are u sure it's not a firewall issue ? have u disabled the native windows firewall ?
...
I have tried anything that I±e found in discussions at this server but still unsuccessfully. There are now 2 major problems in Magneto:1.This ActiveSync problem(that could be solved maybe)and the 2.Unability to install/run more than 50% of applications that I am using normally in 2003se. This umcompatibility is unbelievable and stupid,but it's true. This is the biggest problem that keeps me still out of Magneto.
...
I have tried anything that I±e found in discussions at this server but still unsuccessfully. There are now 2 major problems in Magneto:1.This ActiveSync problem(that could be solved maybe)and the 2.Unability to install/run more than 50% of applications that I am using normally in 2003se. This umcompatibility is unbelievable and stupid,but it's true. This is the biggest problem that keeps me still out of Magneto.
...
...
...Sorry I forgot. I have disabled my Kerio PFirewall,The Microsoft in XP I am not using. I have installed also the drivers that had to change the 'Generic RNDIS...' to 'windows mobile based device' but also doesn't help. PS:Sorry for double. I didn't want that.
try to delete the windows mobile based device then with the pda in the cradle restart the pc
...
I am at the end with any ideas. Nothing helps. Thanx guys for your help. Now I'll be back to Diamond that works best at this time. Maybe I will wait for any other version of WM5 and try it later.
On XP with ActiveSync I can keep my 3G connection going reliably while still syncing. Whatever I do with Vista, the 3G connection goes down and I assume the "Internet" connection goes through the USB. Downside of this for me is VOIP - get a VOIP call while the phone's in the holder and you can't pick it up without losing the connection.
Gotta say I'm no fan of Vista Home Premium, besides not having remote desktop, we're forced to use their Windows Mobile Device Center. I've done Mr.Vanx's Vista hack, but haven't dared to upgrade anything on that system given it's wierd behaviour (relay on my XP system instead).
What am I missing here? Anyone else get the Vista sync to work as well as with XP?
(I've run some searches, but must have missed something.)
did you make sure you turned off the data service through the connection options? I know somewhere in there it gives you the option to allow data connections while connected to the pc.
I would never upgrade a device over Vista the sync center; it is so unstable, I too run Vista but to upgrade I have to boot into XP because device center crashes just synching and this is on a top spec machine. I would never trust it to do a upgrade.
Thanks for the tip, vwest87, but I guess that's what I'm after.
In the connection settings on XP ActiveSync if you select "Allow data connections on device when connected to PC" and have the device set to "Enable advanced network functionality" in the USB to PC connection settings, the phone can sync with the computer while at the same time maintaining the 3G data connection. With the same settings on Vista WMDC, I've mostly experienced that the 3G connection shuts down and all data is rerouted to the USB connection.
Now, after uninstalling and reinstalling multiple times it appears to be working as it should (like XP ActiveSync). Guess Murphy's law is in play here. As soon as I put up a post, it miraculously fixes itself. That's what I love about M$, they somehow manage to put magic into a system that's supposed to be logical and controllable (or maybe its gremlins).
Douh! Spoke too soon. Vista shut down WMDC and the device lost the 3G connection and began cyclically trying to reconnect right after my last post. Vista claims that the WMDC host process was improperly using system memory.
Imagine if that happened while upgrading a radio ROM. Upgrading on Vista is tantamount to Russian roulette with your device.
Oh well, back to disabling advanced network functionality on the device to use the USB connection as a charger only.
Hi.
Anyone with same problem. I only have seen it on vista side. Working with 3g conectivity. One minute is connected with tray icon showing globe. Then 30 isnt connected with tray icon showing computers with red cross. Then again connected 3 minutes. It seems a problem between vista side and internet sharing service from snapvue. I ve seen this issue in other spanish shift. Maybe a spanish version problem? any idea?
Thanks
Not much help I know but see my thread titled 'continued vista connection problems'. Have you been using internet sharing to gain access to WM 6.0? i noticed Activesync was always starting on the snapvue side which I think is linked to the constant disconnections.
A full restore from the restore partition solved my problem and I now get a steady 3g connection.
Thanks for your response. Not alone now. Format is a solution but we should know the origin of this problem. Obviosly is related with the way connects to 3g, this is, using Internet Shared connection with snapvue...but...why suddenly activesync (client or server part) tries to connect the other side and breaks the internet shared connection? any idea?Did you install sp1? is your shift language english or other one? ( I am trying to discard sources of the problem).
pd. While I write these lines on winmo side I can listen vista side sounds (connect/disconnect each minute...)
Hi,
I did some changes and It seems (by now) the problem is solved. I ve playing with continous 3g connections. This is what I did (I dont know which one did the trick).
1) Disable activesync usb connections for both sides( I did it for vista side days ago but know I did too in snapvue size.
2) Sevice Sync bluetooth Server stopped and set manually.
3) Reset both sides
Now I ve a stable 3g connection....
Daniel
Glad you got it working. What do you do to disable Activesync on the Snapvue side?
I only noticed this problem after installing SP1 but I was working mostly with WIFI so cannot be sure there is a link.
gavmiller said:
Daniel
Glad you got it working. What do you do to disable Activesync on the Snapvue side?
I only noticed this problem after installing SP1 but I was working mostly with WIFI so cannot be sure there is a link.
Click to expand...
Click to collapse
Hi.
The problem is solved, now for sure. Open Activesync in winmo,then menu/connections and uncheck "use usb ...". I removed too the partership between both sides althought It isnt important, I think...
Thanks Daniel. Good to know incase it happens again.
Today I am having the same issue...mmm, I dont know what else I can do. I will post the events I can see in the event's viewer....
danielherrero said:
Today I am having the same issue...mmm, I dont know what else I can do. I will post the events I can see in the event's viewer....
Click to expand...
Click to collapse
Hi Daniel - are you still having these problmes?
Hi. I didnt have that issue anymore. I removed the partership whith the device on vista side. I remove "Usb connection option" on activesync in both sides. I uninstalled "Remove NDIS Share connection" (Device Manager) on vista side and rebooted. Then on restart vista recognized again the device(Remove NDIS Shared connection) after some minutes(5-10 min) and then all worked correctly. I think the last step did the trick. But I am not free of problems. Like I told before when I resume the device and It was hibernated/suspended for a long time (several hours) the 20% of times It cant connect 3g and even I cant restart vista but keeping pressed the power button. So, by now, If my device is going to stay suspended for a long time (night) then I turn it off......
pd. When I need connect vista and snapvue I turn the phone off. I enable usb connection in both sides and use usbtools. After using the connection I undo these steps and all works correctly by now (last 3 weeks).
Ensure too that Vista hasnt setup a new Windows CE device on Device Manager. To check it open Device Manager, then "See devices by connection" and check each usb connection. If you see any Windows CE device disable it. I think both Remove NDIS Shared connection and a Windows CE Device was fighting for the same usb connection (In my case)
danielherrero said:
Hi. I didnt have that issue anymore. I removed the partership whith the device on vista side. I remove "Usb connection option" on activesync in both sides. I uninstalled "Remove NDIS Share connection" (Device Manager) on vista side and rebooted. Then on restart vista recognized again the device(Remove NDIS Shared connection) after some minutes(5-10 min) and then all worked correctly. I think the last step did the trick. But I am not free of problems. Like I told before when I resume the device and It was hibernated/suspended for a long time (several hours) the 20% of times It cant connect 3g and even I cant restart vista but keeping pressed the power button. So, by now, If my device is going to stay suspended for a long time (night) then I turn it off......
pd. When I need connect vista and snapvue I turn the phone off. I enable usb connection in both sides and use usbtools. After using the connection I undo these steps and all works correctly by now (last 3 weeks).
Ensure too that Vista hasnt setup a new Windows CE device on Device Manager. To check it open Device Manager, then "See devices by connection" and check each usb connection. If you see any Windows CE device disable it. I think both Remove NDIS Shared connection and a Windows CE Device was fighting for the same usb connection (In my case)
Click to expand...
Click to collapse
OK, the only bit I hadnt tried was the uninstall of the NDIS in device manager. I'll give it a go and see what happens. Thanks again for this reply!
Thanks Daniel for your detailed description on this problem, which I also have. Interesting thing is that for me it only occurs when I am on the move with my Shift. No problems when my Shift remains on my desk (like others described in this thread: http://forum.xda-developers.com/showthread.php?t=381220&page=2 )
On your described solution: I removed the Vista/Snapvue partnership and the usb connection on both sides. But I am not able to do the next step: "Remove NDIS Share connection" in device manager, because it's not there (see attached screenshot). Does this mean it was never there, so I do not have to uninstall it? Or is there a different way to find it?
Hi.
Reset Vista to ensure It boots correctly. Then wait to be 3g connected. Once you are connected the device "Remote NDIS shared connection" should be there under network cards. Then uninstall it and reset again. Once booted you have to wait several minutes until vista detects it again and installs drivers.....
pd. And try to contact HTC. Maybe (only maybe) if HTC is reported with same problem from many people they releases a fix.....
Hi there,
That did not help at all!
Waste of time.
But thanks for the hint.
What DID help for me was closing WMDC through taskmanager.
When you just exit WMDC, task manager still shows that it is running there in the background and apperantly scanning your ports for mobile devices ore something.
I stopped it from running and have a stable connection now.
(replying from train right now)
greetz,
Pfeffa-rah
Pfeffa-rah said:
Hi there,
That did not help at all!
Waste of time.
But thanks for the hint.
What DID help for me was closing WMDC through taskmanager.
When you just exit WMDC, task manager still shows that it is running there in the background and apperantly scanning your ports for mobile devices ore something.
I stopped it from running and have a stable connection now.
(replying from train right now)
greetz,
Pfeffa-rah
Click to expand...
Click to collapse
Hi
Do you have to do this each time you start vista?
Cheers
firedup said:
Hi
Do you have to do this each time you start vista?
Cheers
Click to expand...
Click to collapse
I think you only have to do it after you used WMDC. On my shift it doesnot start at boot (not anymore...) If I want to sync shift or my kaiser, I need to startup WMDC manualy.
grtz,
Pfeffa-rah
My experiences so far.
Is it possible that it is the energy plan that is responsible for the loss of connection. I installed SP1, no problems it seemed. Today I wanted to use the 3G connection with the battery (balanced energy plan). And then it started to disconnect and to connect in small intervals. I did the routine Daniel described: uninstalled NDIS driver. Reinstalled it but connectivity problems remained.
Is it something to do with the battery powered system?
Because, as soon as stop using the battery, plugging in the power adapter again everything seems to be okay. I am not sure about it, but I think, when I use the max power option with the battery the connection stays and fails when I use the balanced energy plan.
So can it be that something in the energy plan is responsible for the loss of the connection?
Experts, does that make any sense?
I will give it some more tries.
S.
I had the High Performance powerplan on all the time......
had it to
Hi
This is a problem when sp1 is installed and you are using 3g in vista being in balanced or power save power plan. it has nothing to do with activesync and usb ports (i have never had a connection)
i called htc yesterday, they clamed they had never heard about it before, so please as many as possible call htc and tell them then maybe just maybe they would release a fix
in rhe meantime i uninstalled sp1 and everything works
In my case the solution is quite clear.
3G works in Balanced mode and in High Performance when power is plugged in. I am not so sure if it works in “Power Save” even when on power.
3G does not work when either on “Balanced” or “Power Save” when using the battery. Battery works in “High Performance” even when all the options are set like they are in “Balanced” mode.
This I found somewhere else in the forum. It is from Daniel and I guess he says the same, more of less.
Well. I ve been doing many tests and changes and I thing the sd, suspend crashes and 3g closed connections are gone.
I use equilibrated energy plan but I hadn’t any issue when ac connected so I ve modified this plan to make equivalent the behavior when not ac connected, but not success. The problems are still there. Its incredible because the configuration for ac connected/disconnected is the same I ve modified all the parameters (usb, expressPCI, , etc)
So I ve set High performance plan and I ve modified it a little bit, only screen brightness when no ac connected and now all works correctly. I start the system (no ac connected). Then I suspend / wake, hibernate/resume the system several times being ac no connected and the problems are gone. 3g connection is very stable. No crashes from standby to hibernate state. No sd missing problem. So by now I will keep in this "High Performance" modified state
pd. So It seems that a plan is compounded by customizable parameters by the user and hidden parameters)
Now, those who have not installed SP1. Is this really no issue for you? Or have you always been on power or always used “High Performance”?
Well, even when I plug in my external battery and the green light indicates that the machine has been plugged to power, even then it only works in “high performance” and not in the two other modes.
Very strange!
S.
Tried to use skype in Vista but no Gprs, what do I have to do to open that gprs install a modem or........
Gprs and Hsdpa works perfect in Liberated WM6 with this simcard
Any help is appreciated
TheoMobile said:
Tried to use skype in Vista but no Gprs, what do I have to do to open that gprs install a modem or........
Gprs and Hsdpa works perfect in Liberated WM6 with this simcard
Any help is appreciated
Click to expand...
Click to collapse
Does IE work in Vista via GPRS? If not, when you go 'Control Panel' 'Network Sharing Center' 'Network Connections' do you see the NDIS connection?
Have you left the USB tool connected in Snapvue (if you use it!) the last time you used both Vista and Snapvue together?
If USB tool was left connected, sometimes the Modem will not pass IP activity from a standby of Vista, shutdown Vista, then in USBtool in Snapvue, select detach from Vista. When Vista resarts it should see the Modem but you may need to restart it from Comm Manager.
yes left open the usbtool in snavue and ndis is present but got just a message
device is experiencing driver or hardware related issues
there is a problem HTC shift was not shipped wit a cd or drivers, i cannot try to improve it
tried to update the drivers but vista could not, do you know where drivers to get
any way sofar you helped, at least i know now where to look
TheoMobile said:
yes left open the usbtool in snavue and ndis is present but got just a message
device is experiencing driver or hardware related issues
there is a problem HTC shift was not shipped wit a cd or drivers, i cannot try to improve it
tried to update the drivers but vista could not, do you know where drivers to get
any way sofar you helped, at least i know now where to look
Click to expand...
Click to collapse
fn + f3 on boot and you recover vista. for many of us had been the only solution.
TheoMobile said:
yes left open the usbtool in snavue and ndis is present but got just a message
device is experiencing driver or hardware related issues
there is a problem HTC shift was not shipped wit a cd or drivers, i cannot try to improve it
tried to update the drivers but vista could not, do you know where drivers to get
any way sofar you helped, at least i know now where to look
Click to expand...
Click to collapse
Just had exactly the same message on mine.
Method I used..
Wireless Network disabled with Modem on, go to Control Panel, Device Manager. Right click on NDIS modem under Network Devices (it should be showing an exclamation mark) and select uninstall.
Restart Vista and it will reload the driver correctly.
Greetings every one
I have searched through the threads to try and find a solution to my problem and I have tried hard and soft restart on Snapvu, F2 and F3 but nothing works
I am having a little trouble with my Shift 9500 running Vista. All was well until about a week ago when I lost WLAN. When I attempted to turn on WLAN in the SHAG Control, SHAG control freezes and vista tells me that the "program is not responding". Sound is also muted.
I do, however, have a network symbol in the notification area that tells me it is not connected, when I ask vista to diagnose the problem it tells me to install a network card and the software. So, I reinstall the Marvell Wi-Fi driver, downloaded from the HTC website, but still no effect and the same thing keeps happening.
Does anyone have any suggestions?
I have the same problem now. Got original preinstalled Vista and even after Hard reset WLAN seems to be turned on in Control Center but the WLAN card is not even seen on hardware list. Got latest Marvell driver installed. It's rather not hardware problem as WLAN used to work before hard reset. Maybe it has to do with Microsoft hot fixes (have automatic updates enabled) but run without SP1. It's driving me crazy when trying to enable WLAN or Bluetooth it takes minutes like you. Any ideas plase? Thanks
aprach said:
I have the same problem now. Got original preinstalled Vista and even after Hard reset WLAN seems to be turned on in Control Center but the WLAN card is not even seen on hardware list. Got latest Marvell driver installed. It's rather not hardware problem as WLAN used to work before hard reset. Maybe it has to do with Microsoft hot fixes (have automatic updates enabled) but run without SP1. It's driving me crazy when trying to enable WLAN or Bluetooth it takes minutes like you. Any ideas plase? Thanks
Click to expand...
Click to collapse
Well just an update, I did hard Vista reset and it helped. got fully functional wlan device, but still don't know what caused that. basically i see preinstalled vista here is damn unstable and never seen so many blue screens before :/
aprach said:
Well just an update, I did hard Vista reset and it helped. got fully functional wlan device, but still don't know what caused that. basically i see preinstalled vista here is damn unstable and never seen so many blue screens before :/
Click to expand...
Click to collapse
I just posted a message earlier about issues I've been having with WiFi now resolved by changing advanced settings in the chip set. Maybe of some use? If you can't even see the Marvell maybe the only choice IS to do a hard restore, or maybe even trying the copying of the sdbus.sys from the XP page into system32/driver and trying again...that's probably what I would do.
I must admit, most of my issues with WiFI started when I updated to the new driver from HTC....downhill from there.
And note their instructions don't tell you in which order to install the WiFi driver - yet all the others are very specific. Maybe that's where it all goes horribly wrong? I did mine last for reference.
FOOFTR said:
And note their instructions don't tell you in which order to install the WiFi driver - yet all the others are very specific. Maybe that's where it all goes horribly wrong? I did mine last for reference.
Click to expand...
Click to collapse
I'd suggest if everything works fine then no need to upgrade and take this risk... i simply ignored new htc drivers )
Hey Fooftr )
How are you? Managed to overwhelm this damn WLAN? I was happy too early. Even though my automatic MS updates were disabled after hard reset and I haven't even touched new htc drivers, my WLAN dissapeared again under Vista after some time.
Have installed latest Marvell sd8686.sys drivers from htc and the only result I got is 'Device manager' indicates WLAN card drivers where loaded but device cannot start (Code: 10). Did simple uninstall and even after reboot Vista finds no WLAN device at all. Did same with SD Host and here it's finem Vista finds it and reinstalls drivers. I'm still patient as really like this ****, I mean shift )
I've also replace sdbus.sys (81KB) file with mine laptop one 87KB but no difference.
The only networking actions I've been doing were related to installation of NDIS drivers together with the first WinMo sync. Maybe this is it? Don't know and wouldn't like to hard reset it again. Also XP is not an option until touchscreen and sdhc support is solved.
Guys any thoughts? Ideas? Does anyone have the same problem with vanishing WLAN device? Again it works after hard reset so it's not a hardware prob imo.
Cheers Shifters ;o)
Silence means either I'm alone with the problem or there are others but no solution found
I did some progress yesterday and GOT MY WLAN working fine now. I've been trying to play with HTC Marvell driver folders content as despite of WLAN setup file there are other toolkits attached by HTC. IT's not ideal and does enable WIFI fine but enables BT as well however BT device cannot find any other devices - later down below about BT.
PLS READ THIS FIRST BEFORE YOU TRY, it's just my observation and may be only my case.
If you guys have the same experience with WLAN device as I do please try to do following, it helped in my case and now have all WLAN and BT enabled and visible in Vista SP1 after sleep/restart, whatever.
1. My Vista config is as follows:
- SP1 installed (eng)
- all updates installed from Microsoft Update
- all HTC drivers installed except Vitakey which I hear on other threads is causing some headaches.
* although I have all above installed I don;t think it;s a prerequisite. You only need latest Marvell drivers from HTC website.
2. Pls note, although latest Marvell WLAN drivers are installed I used to see no devices.
3. I've described what is a behaviour when I install drivers, devices appear for a few seconds on the list and dissapear at the end of installation.
4. So I went to WLAN folder /Wifidrvpatch/TOOLKITS and found HTCMEDIA.INI file with number of commands.
5. At the end of the file you can find three commands related to ECTKit.exe and vcpj_TSinstall.exe
6. What I did yesterday what enabled my devices? Started to launch them to see what will happen.
I launched three application but I'm not sure which one helped, my devices started to apeparing on th list after ECTKit.exe with one of parameters added.
7. Launch Device Manager and expand Network adapters. Right click on desktop 'My computer' and choose 'Manage'. From the list then choose 'Device Manager'. IF you don't see NEtwork adapters on the list it's probably same as in my case. go to next step.
8. Click Start->Run->cmd
change your path (using 'cd' command) to be in marvellwifi/wifidrvpatch/toolkits/tool where ECTKit.exe is located.
Launch ECTKit.exe by typing ECTKit.exe /EnableAllDevice
after that my devices appeared on the list.
As I said I launched three execs this evening. First was vcpj_TSinstall.exe (then clicked on install) but haven't noticed any change, dvices were hidden and shift was not much busy with this exec. Second I launched ECTKit.exe /RestoreAllDevice (Still no devices on the list BUT I've noticed Computer Management tool (the one you've opened to see devices) has indicated under 'System Tools->'EVent Viewer' -> 'Windows Logs' -> 'Security' that one of sys files is not loaded due to hash issue. IT's called CCDEVIO.sys and used to fail EVERYTIME when I tried to install MArvell drivers before (have checked logs history).
As the third command launched was ECTKit.exe /EnableAllDevice and this one helped.
What I suspect in my case CCDEVIO.sys may be causing problems but not sure. For example this sys file is trying to be loaded when I open WindowsMediaPlayer and fails as well so I'm not sure. Anyway that's the only misbehaviour I've noticed related to drivers installation.
Now about BT. It's also enabled. Got access to all functions, etc but there are two problems with BT.
1. My shift cannot find any other BT devices but can be found by my HTC Kaiser with no problems (still with limited number of services shared).
2. BT blue LED under the display flashes all the time now ) Well even if I disable BT Radio device and other BT related it does still blinks ) Well I don;t care anyway at least got it visible and can play further to force it to work. It';s still better than not having it at all.
LAst but not least this trick has not helped to frozen Shift Control Center tool. It freezes if I want to Turn ON/OFF WIFI/BT for coupel of minutes, then indicated device is ON or OFF, I can close it but it does not communicate with devices at all - meaning if I turn my WLAN ON thru control center it's not turning ON. Need to go to Network Adapters window under NEtwork Sharing Center and simply enable it. It's till fine as shagctrl sucks anyway, no brightness can be adjusted and when I try to access Settings, after 10-20 seconds got message 'Get EC firmware version failed' and settings opens (this error was observed even after my Vist agot hard reset some time ago and even after I installed latest EC drivers from HTC site)...
I'm not sure how HTC tests their drivers in testing environment but they probably outsource it to well known business oriented countries )
Sorry for long story but maybe it will help some of you. I'm damn happy got my WIFI working as do not need BT for now
aprach said:
Silence means either I'm alone with the problem or there are others but no solution found
I did some progress yesterday and GOT MY WLAN working fine now. I've been trying to play with HTC Marvell driver folders content as despite of WLAN setup file there are other toolkits attached by HTC. IT's not ideal and does enable WIFI fine but enables BT as well however BT device cannot find any other devices - later down below about BT.
PLS READ THIS FIRST BEFORE YOU TRY, it's just my observation and may be only my case.
If you guys have the same experience with WLAN device as I do please try to do following, it helped in my case and now have all WLAN and BT enabled and visible in Vista SP1 after sleep/restart, whatever.
1. My Vista config is as follows:
- SP1 installed (eng)
- all updates installed from Microsoft Update
- all HTC drivers installed except Vitakey which I hear on other threads is causing some headaches.
* although I have all above installed I don;t think it;s a prerequisite. You only need latest Marvell drivers from HTC website.
2. Pls note, although latest Marvell WLAN drivers are installed I used to see no devices.
3. I've described what is a behaviour when I install drivers, devices appear for a few seconds on the list and dissapear at the end of installation.
4. So I went to WLAN folder /Wifidrvpatch/TOOLKITS and found HTCMEDIA.INI file with number of commands.
5. At the end of the file you can find three commands related to ECTKit.exe and vcpj_TSinstall.exe
6. What I did yesterday what enabled my devices? Started to launch them to see what will happen.
I launched three application but I'm not sure which one helped, my devices started to apeparing on th list after ECTKit.exe with one of parameters added.
7. Launch Device Manager and expand Network adapters. Right click on desktop 'My computer' and choose 'Manage'. From the list then choose 'Device Manager'. IF you don't see NEtwork adapters on the list it's probably same as in my case. go to next step.
8. Click Start->Run->cmd
change your path (using 'cd' command) to be in marvellwifi/wifidrvpatch/toolkits/tool where ECTKit.exe is located.
Launch ECTKit.exe by typing ECTKit.exe /EnableAllDevice
after that my devices appeared on the list.
As I said I launched three execs this evening. First was vcpj_TSinstall.exe (then clicked on install) but haven't noticed any change, dvices were hidden and shift was not much busy with this exec. Second I launched ECTKit.exe /RestoreAllDevice (Still no devices on the list BUT I've noticed Computer Management tool (the one you've opened to see devices) has indicated under 'System Tools->'EVent Viewer' -> 'Windows Logs' -> 'Security' that one of sys files is not loaded due to hash issue. IT's called CCDEVIO.sys and used to fail EVERYTIME when I tried to install MArvell drivers before (have checked logs history).
As the third command launched was ECTKit.exe /EnableAllDevice and this one helped.
What I suspect in my case CCDEVIO.sys may be causing problems but not sure. For example this sys file is trying to be loaded when I open WindowsMediaPlayer and fails as well so I'm not sure. Anyway that's the only misbehaviour I've noticed related to drivers installation.
Now about BT. It's also enabled. Got access to all functions, etc but there are two problems with BT.
1. My shift cannot find any other BT devices but can be found by my HTC Kaiser with no problems (still with limited number of services shared).
2. BT blue LED under the display flashes all the time now ) Well even if I disable BT Radio device and other BT related it does still blinks ) Well I don;t care anyway at least got it visible and can play further to force it to work. It';s still better than not having it at all.
LAst but not least this trick has not helped to frozen Shift Control Center tool. It freezes if I want to Turn ON/OFF WIFI/BT for coupel of minutes, then indicated device is ON or OFF, I can close it but it does not communicate with devices at all - meaning if I turn my WLAN ON thru control center it's not turning ON. Need to go to Network Adapters window under NEtwork Sharing Center and simply enable it. It's till fine as shagctrl sucks anyway, no brightness can be adjusted and when I try to access Settings, after 10-20 seconds got message 'Get EC firmware version failed' and settings opens (this error was observed even after my Vist agot hard reset some time ago and even after I installed latest EC drivers from HTC site)...
I'm not sure how HTC tests their drivers in testing environment but they probably outsource it to well known business oriented countries )
Sorry for long story but maybe it will help some of you. I'm damn happy got my WIFI working as do not need BT for now
Click to expand...
Click to collapse
Hello,
I have a similar issue withe Marvell Wifi adapter.
I restored the system to the manufacturer settings pressing F3 while booting and the problem remains:
If the Shift is powered off or hybernated more than 30 minutes and then powered on, then Wifi works well, the adapter appears in the device manager, and I can power it on or off with HTC comunication administrator (the progran which opens when you push the upper right button).
If, whith Wifi working, I suspend, reboot or power off the shift for less than 30 minutes, the Marvel wifi adaptor dissapears from the device manager, Wifi doesn't work and I can't enable or disable it from the HTC comunication administrator.
I have restored the system to manufacturer settings pressing the F3 button while booting for three times without success.
Anybody knows how to fix that problem or may I send the unit to the SAT?
Thank you very much
henryfabu said:
Hello,
I have a similar issue withe Marvell Wifi adapter.
I restored the system to the manufacturer settings pressing F3 while booting and the problem remains:
If the Shift is powered off or hybernated more than 30 minutes and then powered on, then Wifi works well, the adapter appears in the device manager, and I can power it on or off with HTC comunication administrator (the progran which opens when you push the upper right button).
If, whith Wifi working, I suspend, reboot or power off the shift for less than 30 minutes, the Marvel wifi adaptor dissapears from the device manager, Wifi doesn't work and I can't enable or disable it from the HTC comunication administrator.
I have restored the system to manufacturer settings pressing the F3 button while booting for three times without success.
Anybody knows how to fix that problem or may I send the unit to the SAT?
Thank you very much
Click to expand...
Click to collapse
Hey, seems it's very unstable. Can you imagine I was to early happy with my findings :/ My WIFI appears and dissapears randomly but the behaviour is a bit different from yours. Mine is available even right after reboot (pess than 30 mins). What I do to solve it is when after turning on there is no device on the list I simply launch drivers installation and do not wait till the end. When I see BT/WIFI devices in Computer Management successfully identified (installation still runs) I simply kill the installer thru "Task Manager" without waiting for completion (as every time after completion devices again dissapear). With that I have a control over WIFI. It's a bit annoying but I can rely on that everytime so far.
Keep observing my shift behaviour what potentialy can impact that and even with WinMo synced and 3G working on WinMo side WIFI is still available. Last time it dissapeared after battery removal for 5 minutes max (to insert new SIM card).
BTW, once you have your BT available can you find external devices using BT built-in software? I cannot...
Even with that I damn like the SHIFT and find it very useful.
Will stay in touch